-Now can load map WAD files inside Maps/ directory, but they must only contain map data explicitly!
Known problems:
-There's an issue causing a crash with palettes and colormaps in PK3s.
-SS_START and SS_END don't work now. Will check later.
-Standalone lumps for maps in the Maps/ folder don't work anymore; perhaps I should keep that functionality?
Notes:
-It's now a mashup of something dumb that I wanted to do and yet piling hacks again.
-A lot of code duplicity with map lump loading functions.
Level specials setup stuff
Some changes to level setup, largely inconsequential for gameplay but maybe helpful for Lua scripting:
* gravity, weather, and some other internal variables are set to their defaults before loading things, so their values from a previous level don't affect mobj spawning potentially
* Tag lists are also initialised before loading things, so that tag-based search functions (such as P_FindSpecialLineFromTag) can be used internally for the maces and particle generator. This should probably extend to Lua as well
* the level header "forcecharacter" no longer recognises "255" as "None" anymore. This is because it no longer takes skin numbers (as of whenever that change was added... version 2.0?), and level headers are auto-cleared when edited anyway.
See merge request !88
This allows tag lists, gravity, weather, and the "CheckFor" vars to be initialised before running P_LoadThings or P_ResetDynamicSlopes, in case they could affect mobj spawning or cause a netgame desync somehow by carrying over the previous level's values
* PF_NIGHTSMODE is now CR_NIGHTSMODE as part of player->powers[pw_carry]. This is because it's mutually exclusive to every other "carry" type.
* PF_SUPERREADY is dead because it literally just checked for all 7 emeralds and 50 rings. That's it. You couldn't even appreciably alter its presence with Lua. That logic has been placed back in P_SuperReady.
* Super sprites are now deliniated via an additional S_SUPER lump between S_START and S_END. Above are normal sprites, below are super sprites. Handled internally via FF_SPR2SUPER.
* Sprite2 numbers are now appropriately limited for the data type that stores them.
* SPR2_SPIN is now SPR2_ROLL, SPR2_DASH is now SPR2_SPIN and SPR2_PEEL is now SPR2_DASH. Makes more sense, right?
Revamps of several dated linedef type effects
Felt like being productive so made some things I hate suck less.
Linedef type 7 (flat alignment) now works as follows.
* Linedef angle (from v1 to v2) is flat angle.
* Origin of flat is manipulated to match v1's coordinates - unless ML_NOKNUX is flagged, in which case uses frontside x and y offsets as flat offsets instead.
* ML_NOSONIC prevents changing floor.
* ML_NOTAILS prevents changing ceiling.
* Both of the above flags at once prints a warning.
* (THZ and probably a few other maps need updating.)
Linedef type 540 (friction) now works as follows.
* Controlled by x offset instead of length - offset of -100 is maximum iciness, offset of +483(!!!) is the maximum sludginess BUT things are scaled such that +100 is about the maximum sludginess any reasonable human being would want in a level, 0 is ORIG_FRICTION)
* Not reliant on a sector special to function (can be applied solely by tag to in-map sectors or solid FOF control sectors)
* Uses less memory, perform less calculations, and not bug out objects which just happen to use movefactor for something
* PHYSICS CHANGE: Low friction surfaces actively impede your acceleration (and make your animation speeds faster to give off that Looney Tunes out-of-control effect)
* (ACZ and Frozen Hillside needs updating.)
Sector types 1 and 3 in section 3 no longer do anything.
Linedef type 3 (zoom tube) now works as follows.
* Abs of frontside x offset is speed in units of FRACUNIT/8.
* Abs of frontside y offset is waypoint sequence number.
* Effect 4 flag rotates the player to match the waypoint direction (same as before).
* (ERZ needs updating.)
Linedef type 11 (rope hang) now works as follows.
* Abs of frontside x offset is speed in units of FRACUNIT/8.
* Abs of frontside y offset is waypoint sequence number.
* Effect 1 flag makes rope transfer one-way. (same as before)
* No climb flag makes rope static. (same as before)
* (ACZ and maybe ERZ need updating.)
Linedef type 258 (laser) is almost the same as before, but has altered functionality.
* Its flashing is less obnoxious. (56.25% to 68.75% instead of 100% to 0%, at half the speed)
Linedef type 14 (Bustable block parameters) is new, and works as follows.
* Tagged to the control sector of a block that is likely to be busted (via executor or collision, doesn't matter)
* Concatenation of frontside textures is MT_ object type to spawn, defaults to MT_ROCKCRUMBLE1 if not present
* Sound played when being busted is object type's activesound
* Frontside x offset is spacing (in fracunits) of spawned particles, defaults to 32<<FRACBITS
* Frontside y offset is the fuse of spawned particles in tics, defaults to 3*TICRATE, if set to -1 fuse is not set
* Effect 1 flag makes particles "fly out" horizontally and vertically from the center of the FOF
Sector types 7 through 15 in section 3 no longer do anything.
Linedef type 250 (Mario Block) is almost the same as before, but has new functionality and is slightly different in another way.
* No Climb flag turns it into a brick block (set on Custom FOF via presence of FF_SHATTERBOTTOM - busts when hit from the bottom, player hits their head/fist/whatever, no more upwards momentum)
* Effect 1 flag makes it an invisible block (set on Custom FOF via absence of (FF_SOLID|FF_RENDERALL|FF_CUTLEVEL) - intangible from every side except the bottom. Becomes visible and tangible when it's hit once)
* Only updates side textures when moving down or stationary, not whilst moving up - more fidelity to the source material, less processing on the CPU, everyone wins.
* If FOF master linedef has a backside, then: [If there's items in it the FOF's flats are set to that of the backside sector's ceiling, otherwise the floor.] Otherwise, no flat change.
Linedef type 4 (Speed Pad parameters) now works as follows.
* Frontside x offset is speed in fracunits.
* Effect 4 flag doesn't center the player. (same as before)
* Effect 5 flag sends them off in rolling frames.
* Frontside upper texture is sound to play on launch, defaults to sfx_spdpad when not given
Sector type 6 in section 3 no longer does anything.
Object type 757 is changed as follows, and no longer works on its own - see Linedef type 15 for more details.
* Tag via its angle field
* Number of objects to spawn per tic around it via its z field, if zero then just spawn at center
* Is flipped if given MTF_OBJECTFLIP.
* (ERZ and Seraphic Skylands - if we use that map - needs updating)
Linedef type 15 (Fan particle spawner parameters) is new, and works as follows.
* Tag is tag of object(s!)
* Object type set via concatenation of frontside textures, MT_PARTICLE is default
* The length of the linedef is the radius the particle is spawned out (zeroed if z field is 0)
* Frontside x offset is speed upwards
* Frontside y offset is number of degrees to turn each tic (zeroed if z field is 0)
* Frontside floor and ceiling heights are the heights in which the particle is bound through some fun mathematics
A_ParticleSpawn is changed, too.
* Object type is now changed through actor->threshold instead of var1 to support Linedef type 15.
Test executable uploaded at /toaster/srb2win_branch_flatalignment.exe on the ftp.
Test file uploaded at /toaster/flatalignment.wad on the ftp.
Breaks compatibility with 2.1 so put in internal.
See merge request !29
Plane displacement
Basic support for plane displacement, no netplay support as of writing but this is what Nev3r wanted moreorless at least.
Linedef types 66-68 are the plane displacement specials; 66 = move floor only, 67 = move ceiling only, 68 = both
Front sector = control sector
Tag = tag of target sectors to be moved whenever the control sector floor moves
Linedef length = movement factor relative to control sector movement, 256 = 1:1 with control sector. 128 is half as much, 512 is twice as much, etc.
Whenever the control sector floor moves (not ceiling, never ceiling), the selected planes of the tagged sectors all move (mind, they have a tic delay due to how it all works, it's not perfect really). No support for reverse speeds yet sorry.
EDIT: oh, btw, test exe and test map are included in my folder on the FTP (srb2win-plane-displacement.exe and plane-disp-test.wad, respectively)
See merge request !61
Savegame hotfixes
Yes, this another netgame related fix! Named this "savegame hotfixes" rather than "ERCZ hotfix" or the like in advance of the fact we probably need a general branch for other $$$.sav fixes?
Anyway, fixes included in by this branch:
* ERCZ's lava falls now act as expected rather than being stuck in place for the map's duration, fixing all other known desynchronisation issues known in the map for the time being (yay)
* Changing sector tags in a map no longer causes joiners to netgames to have their SRB2 application stop responding etc
* Player names should no longer turn red in the console in gametypes outside of CTF/Team Match if a resynch occurs (not $$$.sav related, but it's related to netplay so I lumped it in anyway)
See merge request !150
Dunno who thought it was a good idea to lump tag, nexttag and firsttag together in $$$.sav, but that meant changing sector tags caused SRB2 to stop responding since it lead to the tag lists being broken
* Cleaner A_ParticleSpawn code.
* Removed several hacks with Mario blocks, and corrected a mistaken assumption with when the FOF's thinker is being applied.
* Made the flashing of T_LaserFlash even less obnoxious.
Even more slope-related fixes
What it says on the tin pretty much:
Currently included fixes:
* Pusher specials applied to FOFs did not properly account for slopes applied to the bottom plane; this probably was just a minor slipup that appeared on adding the support in the first place, I take it? (some waterfall in the last section of SUGOI's Fudge Canyon is the only place I can think of offhand where this bug is noticable)
See merge request !114
If there's any reason to bring the old system back we could make it togglable by one of the linedef flags I suppose. Not that many people would actually use it though, most likely
for some apparent reason the compiler didn't like the while loop condition edit on its own (it complained about inline failures for P_MobjReadyToTrigger for some reason), so I had to add that extra bit above the while loop... and it was happy again, huh
Two interesting points of note:
* The touchspecial sector flag seems to actually do its job now.
* Detection of sectors with polyobjects in seems to have done this incorrectly, but this doesn't mess with anything about touching the polies themselves so it seems to really only handle edge cases where the polyobject was too close to the border of another sector (which would've likely made rendering glitches anyways).
* There was a whole swathe of teetering code that was basically never run properly because of this mistake. I did a simple fix at first, but you started teetering whenever you were slightly less than your radius away from a sector's edge, which was completely different and undesirable behaviour. Instead, I cut out the code that was never running, and just left the hacky method in instead since it was more accurate to what we want in general.
* Only change texture when stationary or moving down, for additional fidelity to source material. This has zero overhead, and actually might REDUCE lag in some circumstances... my nitpickiness wins again.
* Apply ML_EFFECT1 to it to make it invisible and intangible (removing (FF_SOLID|FF_RENDERALL|FF_CUTLEVEL) from it) from every side except the bottom. Becomes visible and tangible when it's hit once. Might fuck over players in mp, but really our Mario blocks are so high in the air (and we'd need to update Pipe Towers to take advantage anyways) that they're super unlikely to get a kill this way
* Checks for the Brick Block have been switched over to the presence of FF_SHATTERBOTTOM instead of checking for the source linedef's flags every time.
Linedef type 4 now works as follows.
* Frontside x offset is dash speed.
* Effect 4 flag doesn't center the player. (same as before)
* Effect 5 flag sends them off in rolling frames. (as a result there is only one speed pad sector type now, not two)
* Frontside upper texture is sound to play on launch, defaults to sfx_spdpad when not given
Linedef type 14 (Bustable block parameter)
* Applied to one of the linedefs of any FOF's control sector
* Concatenation of frontside textures is MT_ object type to spawn, defaults to MT_ROCKCRUMBLE1 if not present
* Sound played when being busted is object type's activesound
* Frontside x offset is spacing (in fracunits) of spawned particles, defaults to 32<<FRACBITS
* Frontside y offset is the fuse of spawned particles in tics, defaults to 3*TICRATE, if set to -1 assume infinite lifetime
* Effect 1/Slope Skew flag makes particles fly out
Linedef type 250 (Mario Block):
* No Climb flag turns it into a brick block (busts when hit from the bottom, player hits their head/fist/whatever, no more upwards momentum)
* Actively impede your acceleration
* Make your animation speeds faster whenever you're moving (to give off that Looney Tunes effect)
The former change is something that was present in the few low-friction circumstances in the classics, and makes low-friction surfaces more of an active challenge. The latter change is just something I did for fun to more clearly communicate that things are different with the physics here.
High friction surfaces DO NOT involve any of this, since it ended up basically cheesing their existing gameplay.
*Friction linedef effect is now -
1) controlled by x offset instead of length - offset of -100 is maximum iciness, offset of +483(!!!) is the maximum sludginess BUT things are scaled such that +100 is about the maximum sludginess any reasonable human being would want in a level, 0 is ORIG_FRICTION)
2) not reliant on a sector special to function (can be applied solely by tag to in-map sectors or solid FOF control sectors)
Slope fixes
This branch fixes the following slope-related physics and rendering bugs:
* Rings in multiplayer stages respawning inside slopes (even despite being able to spawn ABOVE them on map load)
* Player starts spawning players inside slopes
* Elemental flame trails not appearing if a player spindashes UP a slope; see issue #21
* Dying players "jumping" off slopes to the side if they were previously standing on one
* Some issues with FOF slope rendering
* Various issues with sprites displaying through walls adjacent to slopes
Other features added:
* Objectplace now supports slopes (this is Inuyasha's doing)
* Automap in DEVMODE now supports slopes (my doing)
Just making this merge request now rather than later, ~~in case I decide not to make any more fixes for the time being~~ (this branch doesn't seem to want to die lol), and so we can get these merged in as soon as the code's all been checked over.
See merge request !50
P_RandomChance is now a macro for something that should happen a
certain percentage of time.
P_SignedRandom was moved to a macro. Nobody cared.
# Conflicts:
# src/p_inter.c
BACKPORT: removal of music slots
Relevant commits cherry-picked. Basically everything except the internal music track name switches.
See merge request !43
This fixes how removing certain flags (such as FF_EXISTS) from FOFs can cause HOMs on walls bordering their target sectors. Also fixes how the force-FOF-to-vanish linedef special can leave behind the FOF's shadow
Use whatever names you want for your music. So long as you prefix the lumps with O_ or D_, it doesn't matter anymore.
DISCLAIMER: Linedef type 413 (change music) and Lua scripting is not tested.
(cherry picked from commit 025ca413a2)
# Conflicts:
# src/p_user.c
Compiling errors fixed in this commit:
* Various cases of mixed declaration and statement code
* Implicit declaration of slope functions (read: you forgot to put "include "p_slopes.h" in MORE than a few places)
* an odd case of a bad fixed_t to float typecase, cause by using P_GetZAt directly inside FIXED_TO_FLOAT
* a few minor cases of bad unsigned-signed comparisons
* no prototypes for some of the new slope functions. For goodness sake Red, this is basic stuff!
Compiling errors fixed in this commit:
* Various cases of mixed declaration and statement code
* Implicit declaration of slope functions (read: you forgot to put "include "p_slopes.h" in MORE than a few places)
* an odd case of a bad fixed_t to float typecase, cause by using P_GetZAt directly inside FIXED_TO_FLOAT
* a few minor cases of bad unsigned-signed comparisons
* no prototypes for some of the new slope functions. For goodness sake Red, this is basic stuff!
*player->health (formerly the "HUD" health) is now to be known as player->rings, and now acts as the player's actual ring count
*player->mo->health (formerly rings + 1) is now always 1 when alive, regardless of ring count; if player with rings is damaged, this is untouched
Damage in normal SP/Coop gameplay has been tested and still works fine; still a lot of mess to clear up though
Tag damaging probably is broken now, I'll fix this later
...
(It's that infamous intangible West/South linedefs bug, which was really a blockmap-related bug all along. AND IT WAS SO SIMPLE TO FIX!)
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@9048 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
...
(It's that infamous intangible West/South linedefs bug, which was really a blockmap-related bug all along. AND IT WAS SO SIMPLE TO FIX!)
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@9048 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
Currently the main benefit of these changes is that a number of non-Object-related hazards/deaths no long rely on dummy MT_NULL objects or other hacks to tell the game how you were hurt/killed, yay
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@9039 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
SPR_PLAY now calls up a secondary spritedef for all animations for all players. Old character wads (including player.dta) are no longer compatible.
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@8993 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
