The part of HOSTMOD ministats that I wanted. Can go back to ms using the pingmeasurement cvar.
If Tyron wants to bring ministats fully in I think it'd be better to bring its ideas to replace the current HUD instead, ideally using the existing ping gfx, so they should bring it up with Oni
# Conflicts:
# src/d_clisrv.c
# src/d_netcmd.c
# src/d_netcmd.h
# src/doomstat.h
# src/hu_stuff.c
# src/m_menu.c
Update HMS version to 2.2.
Fetch the rules when master server cvar set. Print rules
in console when server register. Display the rules in the
menu when entering the server hosting menu or when
changing the advertise cvar.
* Fix some bugs.
* Reset bannode information properly, fixing being unable to join your own server.
* Write to the buffer before saving the kick/ban reason, rather than after.
* Improve the print output for the `showbanlist` command.
* Includes username.
* Includes remaining time as seen by a kicked joiner.
* Hides expired bans.
* Improve the messages for ban/kick related refused joins.
* Replace the Reason with the actual admin-provided reason for refused connection.
* Replace the "Server refuses connection" header with "You have been [banned/temporarily kicked] from the server", the previous given Reason.
* Fudge the time reported for temporary kicks so that a user is encouraged to return slightly after their tempkick ends, rather than before.
* Add an extra newline to the M_StartMessage for being kicked/banned with a reason provided.
* Ensure it can compile.
* Removing vanilla 2.2 properties that slipped in to previous commits.
* Rearranging i_tcp.c to avoid implicit declaration.
* Complete rename of `IsNameGood` to `EnsurePlayerNameIsGood`.
* Add "BANFORMAT" header, for versioning support.
* Add conversion from 1.3-and-earlier format to new system.
* Don't ban the entire internet - convert zero-masks to the most specific ones.
- Save a note of the username, not just the reason.
- Allow setting a mask with the `banip` command.
- Make ban.txt's formatting a lot more sane. Username and reason are stored in quotes. The mask uses the same formatting as actual CDIR.
- Keep track of if we tried to load ban.txt. If it wasn't, then don't save over it with a blank file.
- Disallow quotes in player names, as it makes player name detection in console more annoying, and saving username in files scary.
# Conflicts:
# src/d_clisrv.c
# src/d_netcmd.c
# src/i_tcp.c
Length is determined by the "kicktime" cvar, in minutes. By default, this is set to 10, but I'm willing to adjust this. Only applies to manual kicks (in the future, maybe also name filter kicks).
The timestamp for the unban time is even saved in ban.txt, so long-term temporary bans are completely possible. (I checked, you can attempt to ban someone for up to 1902 years if you really want to.)
# Conflicts:
# src/d_clisrv.c
# src/d_clisrv.h
# src/i_tcp.c
- Properly call D_SaveBan after remote bans. Bans are no longer saved in the ban command and instead wait for the actual kick to process, since before they were split between the two, which is what caused the discrepancy.
# Conflicts:
# src/d_clisrv.c
# src/i_tcp.c
The intent is to stop servers from needing to dedicate their limited name/MOTD space to things like advertising `lessbattlevotes`, and to avoid "punishing" a server in visibility for allowing temporary gametype switches. However, this is possibly a controversial change, so I'm doing it in its own commit in case there's a clear consensus to revert.
* A "canon" adaptation of the community-created server option `lessbattlevotes`.
* If set to "None", voting behaves as before.
* If set to "Race" or "Battle". that gametype is considered the preference.
* The voting screen is always operated from the perspective of the preferred gametype.
* If you're in an un-preferred gametype, the third vote option will always allow you to continue the gametype.
* If the preferred gametype is Race and you've just exited a Battle map, Encore may now appear on the second vote option.
* A number of bugs with voting have been corrected.
* If `kartencore` is on, the third vote option will now correctly have Encore applied.
* If a custom EXE or malformed packet sends an Encore flag alongside a Battle gametype ID, actively strip it.
* Just to note, clients do not enter Battle Encore with or without this change - this just prevents a promise the rest of the game couldn't fulfill.
2.2 Backports - add ceil slope double step-up/down and fix sprite/models all black in sector with light level of 256
See merge request KartKrew/Kart-Public!274
Makes the displayed FPS more accurate to what it's actually displaying.
Also removed HUDTRANS from it -- stop it fading out during level transitions, it's annoying when I actually want to see the FPS during those bits.
Was done this way for the sake of an older version of uncapped's timing; now that the new timing is much better, I decided it should remain as close to pre-uncapped as it can be.
Advertise_OnChange is CV_NETVAR, so the server will get registered by CV_LoadNetVars when the server starts.
This race condition occasionally pops up in master, but got very consistent with uncapped.
Co-Authored-By: Sally Coolatta <tehrealsalt@gmail.com>
Co-Authored-By: James R <justsomejames2@gmail.com>
Co-Authored-By: Monster Iestyn <iestynjealous@ntlworld.com>
Co-Authored-By: katsy <katmint@live.com>
Place Frame Interpolation in "Experimental" video options header
This seems like an appropriate way to describe the feature for now.
Add smooth level platter under interpolation, `renderdeltatics`
`renderdeltatics` can be used as a standard delta time in any place,
allowing for smooth menus. It will always be equal to `realtics`
when frame interpolation is turned off, producing consistent
framerate behavior everywhere it is used.
Add smooth rendering to save select screen
Add smooth rendering to Record/NiGHTS Attack, F_SkyScroll
Ensure viewsector is accurate to viewx/viewy
This fixes a potential crash in OpenGL when changing between levels.
Ensure + commands get executed before map start
Always have precise_t defined
Fix misc dropshadow issues
Reset view interpolation on level load
Remove unnecessary precipmobj thinker hack
Add reset interpolation state functions
Reset precip interpolation on snap to ceil
Reset mobj interp state on TeleportMove
Only swap view interp state if a tick is run
Run anti-lag chasecam at tic frequency
Fixes jittery and unstable chasecam in high latency netgames
Homogenize mobj interpolations
Add sector plane level interpolations
Add SectorScroll interpolator
Add SideScroll interpolator
Add Polyobj interpolator
Intialize interpolator list at a better time
Delete interpolators associated with thinkers
Interpolate mobj angles and player drawangle
Interpolate HWR_DrawModel
Add functions to handle interpolation
Much less code duplication
P_InitAngle, to fix angle interpolation on spawning objects
Fully fix drop shadows
It used the thing's floorz / ceilingz directly -- that wouldn't account for interpolated coordinates.
Do not speed up underwater/heatwave effect in OpenGL
Closer OpenGL underwater/heatwave effect to Software
Interpolate from time of previous tic
Previously interpolated from last 35th of a second, which
may be offset from game time due to connection lag.
Consider this the proper fix to 54148a0dd0 too.
Calculate FPS stuff even if frame is skipped
I decided ultimately to actually keep the frame skip optimization disabled, because I think it is actually a little bit helpful that you can still get accurate rendering perfstats while paused, however if we decide otherwise then we can have this optimization back without making the game act like it's lagging.
Keep rect in memory
Feel better about this than creating one all da time
Lots of FPS stuff
- Disabled VSync, due to the numerous problems it has.
- Instead, added an FPS cap.
- Frame interpolation is now tied to fpscap != 35.
- By default, the FPS cap is set to the monitor's refresh rate.
- Rewrote the FPS counter.
(This also consolidates several more commits ahead of this
fixing various issues. -eid)
Misc changes after Kart cherry-picks
Fix renderdeltatics with new timing data
Update mobj oldstates before all thinkers
Allow FPS cap values
Adjust how FPS cap is checked to improve FPS stability
Fix precip crash from missing vars
Improve the framerate limiter's timing for extreme stable FPS
Handle the sleep at the end of D_SRB2Loop instead of the start
Simplifies logic in the other parts of the loop, and fixes problems with it frequently waiting too long.
Reset mobj interp state on add
Add mobj interpolator on load netgame
Move mobj interpolators to r_fps
Dynamic slope interpolators
I_GetFrameTime to try and improve frame pace
(It doesn't feel that much better though.)
Move I_FinishUpdate to D_SRB2Loop to sync screen updates with FPS cap, use timestamps in I_FrameCapSleep to simplify the code
Fix plane interpolation light level flickering
Fix flickering plane interpolation for OpenGL in the exact same way
Funny OpenGL renderer being at least 50% copy-pasted Software code :)
P_SetOrigin & P_MoveOrigin to replace P_TeleportMove
Convert P_TeleportMove use to origin funcs
Revert "P_InitAngle, to fix angle interpolation on spawning objects"
This reverts commit a80c98bd164a2748cbbfad9027b34601185d93f5.
Waypoint polyobjects interpolate z & children
Add interpolation to more moving plane types
Adds interpolation to the following:
- Crumbling platforms
- Mario blocks
- Floatbob platforms (this one works really strangely due to two thinkers, maybe double-check this one?)
Reset overlays interp states each TryRunTics
Interpolate model interpolation (lol)
Use interp tracer pos for GL linkdraw
Papersprite angle interpolation
Makes the ending signpost smooth
Move intermission emerald bounce to ticker
Bring back shadows on polyobjects
Also optimizes the method used so rings can show their shadows too. Using just the subsector is a tad bit imprecise admittedly but any more precise methods get really laggy.
Fix a bunch of ticking in hu_ drawing functions
Revert "Reset overlays interp states each TryRunTics"
This reverts commit a71a216faa20e8751b3bd0157354e8d748940c92.
Move intro ticking out of the drawer
Adjust 1up monitor icon z offsets
Fixes interpolation issues with 1up monitors.
Delta time choose player menu animations
Add drawerlib deltaTime function
Interpolate afterimages further back
Use old sleep in dedicated mode
Clamp cechotimer to 0
Fixes issues with cechos staying on-screen and glitching out
(NiGHTS items for example).
Revert "Remove unnecessary precipmobj thinker hack"
This reverts commit 0e38208620d19ec2ab690740438ac2fc7862a49e.
Fix frame pacing when game lags behind
The frame timestamp should've been made at the start of the frame, not the end.
Fix I_FrameCapSleep not respecting cpusleep
Jonathan Joestar bruh
Allow dedicated to use precise sleep timing again
Instead of only using one old sleep, just enforce framerate cap to match TICRATE.
Make Lua TeleportMove call MoveOrigin
Reset Metal fume interp state on appear
Add interpdebug
Put interpdebug stuff in perfstats instead
Add timescale cvar
Slow the game down to debug animations / interpolation problems! Speed it up if you need to get somewhere quickly while mapping!
Enable timescale outside of DEVELOP builds
It has NETVAR, so it should be fine -- put an end to useful debugging features excluded in multiplayer!
Force interpolation when timescale != 1.0
Reset old_z in MT_LOCKON think
Fixes interpolation artifacting due to spawn pos.
Fix cutscenes in interp
Fix boss1 laser in interp
Interpolate mobj scale
Precalculate refresh rate
Slower PCs can have issue querying mode over and over. This might kinda suck for windowed mode if you have different refresh rate displays but oh well
Fix interp scaling crashing software
Reset interp scale when Lua sets .scale
Disable angle interp on fresh mobjs
Fix interp scale crash for hires sprites
Interp shadow scales
Copy interp state in P_SpawnMobjFromMobj
Fix multiplayer character select
Don't interpolate mobj state if frac = 1.0
Fix Mario block item placement
Interpolate spritescale/offset x/y
Fix offset copies for SpawnMobjFromMobj
THANKS SAL
Add Lua HUD drawlists
Buffers draw calls between tics to ensure hooks
run at the originally intended rate.
Rename drawerlib deltaTime to getDeltaTime
Make renderisnewtic is false between tics
I know what I'm doing! I swear
Completely refactor timing system
Time is now tracked internally in the game using I_GetPreciseTime
and I_UpdateTime. I_Time now pulls from this internal timer. The
system code no longer needs to keep track of time itself.
This significantly improves frame and tic timing in interp mode,
resulting in a much smoother image with essentially no judder at
any framerate.
Ensure mobj interpolators reset on level load
Ensure view is not interpolated on first frame
Disable sprite offset interpolation (for now)
Refactor timing code even more
System layer is greatly simplified and framecap
logic has been moved internally. I_Sleep now
takes a sleep duration and I_SleepDuration
generically implements a precise sleep with spin
loop.
mostly a copy/paste job, this fixes issues with certain sloped surfaces improperly obstructing sight (ported files from srb2 commit 4c9b83b6bdd8cd3e2626505940de75668e3db0c2)
* Do not allow any joining spectators if anybody got onto the last lap while not in FREE PLAY (this is the same condition as nospectategrief, for consistency).
* Reset nospectategrief to 0 if there is literally nobody playing, to prevent a fully locked-out server.
* This means it's not a problem to reset spectatorreentry even with the map command.
* Change the default for spectatorreentry to 30 seconds, from 60.
Adds back the "Loading file" message when a file is loaded
Adds individual file errors for things loaded with W_InitMultipleFiles (-file param)
Errors for a given file will now appear between "Loading file" and
the "Added file" or "not adding file" messages, making troubleshooting easier
