Usage is from 3D mode only. When a sector (or wall) is committed to the
clipboard, it (or the wall's sector) is saved, and is subsequently used
when auto-aligning [;-ENTER] another sector's ceiling or floor against the
reference one's. This temp. sector is reset on any structurally modifying
operation except setting first walls; also, aligning extended ceilings or
floors is impossible as they use .*xrepeat internally.
The auto-alignment does not change picnums (this can be accomplished with
the ['+ENTER] combination), but copies the orientation bits 2^{2..6} to the
alignee. Afterwards, if the reference is relative-aligned, it tweaks them,
so that every case where the two firstwalls are either parallel or perpendi-
cular is handled correctly.
It does not yet calculate the panning values.
git-svn-id: https://svn.eduke32.com/eduke32@2715 1a8010ca-5511-0410-912e-c29ae57300e0
Note: You may encounter a crash if you try to test your map and Mapster32 is running fullscreen.
git-svn-id: https://svn.eduke32.com/eduke32@2684 1a8010ca-5511-0410-912e-c29ae57300e0
New engine variable 'int32_t Numsprites', not yet saved into savegames
or mapstates. (The capitalization is to distinguish it from the often-used
'numsprites' locals or structure member names.
In the editor, get rid of updatenumsprites().
git-svn-id: https://svn.eduke32.com/eduke32@2478 1a8010ca-5511-0410-912e-c29ae57300e0
The reason was that drawmasks(), which was where the resetting of the fake
RoR textures happened under Polymer, can be called from polymer_displayrooms()
when mirrors are present. I was assuming that drawmasks() was only ever called
after the 'main' drawrooms and that hence the sequence of fake RoR tile tweaking
was set, reset, set, reset, ... which it was not.
Now, do the resetting explicitly after every drawmasks() in the editor.
git-svn-id: https://svn.eduke32.com/eduke32@2350 1a8010ca-5511-0410-912e-c29ae57300e0
- 'whitecol' was defined in the engine and in build.c, use only the engine one
- make cachesize, artsize, artversion static in engine.c
- undo some formatting havoc presumably done by astyle
git-svn-id: https://svn.eduke32.com/eduke32@2260 1a8010ca-5511-0410-912e-c29ae57300e0
The cause was a combination of many factors. First, Polymer requires the
start-drawing position to be inside the sector to draw (deviations lead to
incorrect drawing). This was violated by the game, because it interpolated
the current and next tic position without updating the sectnum, leading to
inconsistencies especially when passing through narrow sectors. Polymer
worked around it by doing an updatesector() each frame, however this works
poorly for maps with overlapping geometry such as SoS or RoR.
The solution to this is to add a new engine function,
updatesector_onlynextwalls(), which searches the sectors (via nextsector)
in breadth-first fashion instead of from 0 to numsectors-1, like updatesector
does when it fails for the *immediate* nextwall neighbors.
Internally, the breadt-first search helpers are moved into the engine.
git-svn-id: https://svn.eduke32.com/eduke32@2256 1a8010ca-5511-0410-912e-c29ae57300e0
of SPACE and C when in side-view mode. Now, this is accomplished by checking
directly in the overheadeditor code.
git-svn-id: https://svn.eduke32.com/eduke32@2119 1a8010ca-5511-0410-912e-c29ae57300e0
- new mapster32.cfg and OSD variable 'fixmaponsave_sprites', telling the
editor whether to 'fix' the sprite sectnums on saving and entering 3D
mode. Note that a) sprite sectnums are never fixed when 'script_expertmode'
is enabled, as before, and b) sprites that have out-of-bounds sectnums
are still fixed if a proper sector is found
- if saving and some sprite sectnums have thus been tweaked, inform the
mapper on the status line and print the changes in the OSD
- fix update issue similar to an earlier one: when 'saving as', the astub.c-
based file name is now updated too, so saving with Ctrl-S now saves into
the one save with 'save as' (and not the old one)
- don't attempt to recheck wall pointers from scratch (when saving and running
with -check) if it's a TROR map
git-svn-id: https://svn.eduke32.com/eduke32@2110 1a8010ca-5511-0410-912e-c29ae57300e0
before, and additionally a mode that doesn't clip against masked walls
and sprites.
git-svn-id: https://svn.eduke32.com/eduke32@2028 1a8010ca-5511-0410-912e-c29ae57300e0
is to remove a couple of 'inline's for functions with external linkage, which
seems to be a GCC convenience.
git-svn-id: https://svn.eduke32.com/eduke32@2008 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the latter also correct when testing a map from the editor.
git-svn-id: https://svn.eduke32.com/eduke32@2001 1a8010ca-5511-0410-912e-c29ae57300e0
* Read-only CON access to sector bunchnums by adding the labels '.ceilingbunch' and '.floorbunch' to the CON sector structure
git-svn-id: https://svn.eduke32.com/eduke32@1931 1a8010ca-5511-0410-912e-c29ae57300e0
* it is now possible to paste (and have an outer red wall automatically) highlighted sectors into a sector that is extended on one side and non-sloped on the other. For this, the highlighted sectors must be in one connected component.
* Make it possible to not display inner gray walls, toggled with Ctrl-Alt-A, but only when no manual grayout (Ctrl-R) is in effect.
* bugfix: don't clear original TROR-nextwall link when duplicating extended highlighted sector
* m32script: protect wall members relevant to TROR
* save autogray (Ctrl-A) and showinnergray (see above) to mapster32.cfg
git-svn-id: https://svn.eduke32.com/eduke32@1928 1a8010ca-5511-0410-912e-c29ae57300e0
- sethighlightsector <sectnum> <on?>
- updatehighlightsector
- collectsectors <<array_to_collect_sectnums>> <initial_sector> <<num_collected_sectors>> <sector_filtering_state>
The latter does a breadth-first search starting from an initial sector and collects nextsectors only when the filtering state, given a sectnum as RETURN input, writes a nonzero value into RETURN. As a usage example, a.m32 includes the state 'collect_teleporting_sectors', that collects all sectors containing an SE7 and highlights them afterwards. This way, it should be possible to retrofit old maps with TROR by distributing small scripts that do most of the work (right now, joining has to be done by hand, though).
* corruption checker: for the 'nextwall inconsistent with nextsector' corruption, suggest an alternative fix by searching fitting nextwalls and changing the nextwall of the corrupt wall (as opposed to the nextsector). It will display with a leading '?' in the listing, and can be demanded by suffixing 'corruptcheck tryfix' with it. For example,
corruptcheck tryfix 9-21 ?
would fix some corruptions in Billy Boy's cranium.map without introducing drawing errors.
* fix demo playback (tueidj figured this out)
git-svn-id: https://svn.eduke32.com/eduke32@1927 1a8010ca-5511-0410-912e-c29ae57300e0
"The most noticeable change is the addition of the "includedefault" CON and DEF command, which will attempt to include eduke.con (or nam.con, or ww2gi.con), then game.con, or duke3d.def, or nam.def, or ww2gi.def. This is useful for TCs like my add-ons, where for my pseudo-mutators I currently say "include EDUKE.CON", but I also have to juggle this terrible order of paths, so that I can have an EDUKE.CON file in my HRP which says "include GAME.CON" to allow the mainline game to actually run, but also allow DukePlus to load its EDUKE.CON file (since it uses that and not an -x switch), and also allow any custom EDUKE.CON files in the root to be used."
git-svn-id: https://svn.eduke32.com/eduke32@1909 1a8010ca-5511-0410-912e-c29ae57300e0
* Mapster32 now makes sandwiches, too: select all floors of a bunch and 'extend them below'. This will put a new sector between the highlighted ones and the their lower neighbors and displace the z's accordingly. Make sure you have enough headroom.
* To facilitate the above, RAlt now has two more modifier keys (checked at release time, as usual): for every sector that would be selected, END will select all sectors whose floor bunchnum equals the first (this is useful for sandwiching), and HOME will select all sectors whose ceiling bunchnum equals it (not very useful, but provided for completeness).
* Sloping extended sectors is now checked more rigorously
-- misc:
* When deleting highlighted sectors with DEL, pressing LShift will now always delete them irrespective whether the mouse pointer is over one of them. This is useful for the cleanup of corrupted maps.
* 2D drawing is slightly tweaked so that active walls always display over inactive ones
git-svn-id: https://svn.eduke32.com/eduke32@1900 1a8010ca-5511-0410-912e-c29ae57300e0
game: when entering/leaving water or slime, delay changing palette by one game tic to make it look right
git-svn-id: https://svn.eduke32.com/eduke32@1899 1a8010ca-5511-0410-912e-c29ae57300e0
* rudimentary TROR support
* free mixing of multi- and single-tile pskies
* Don't cull models behind you. That is, treat them like floor sprites in that respect. This way large models like corpses don't disappear from the view unexpectedly.
Classic:
* tweak the last row and column of the translucency table so that e.g. a transparent sprite against a FANSPRITE wall doesn't show up purple (only if Duke3D table is found)
Misc.:
* fixes TROR-nextwall corruption when deleting sectors
* tile selector 'goto' now has also completion
* I forgot a file for the non-OpenGL build last time
git-svn-id: https://svn.eduke32.com/eduke32@1892 1a8010ca-5511-0410-912e-c29ae57300e0
* make it possible to duplicate from extended sectors; all extensions are cleared from them
* lazy hightile loading in tile selector can now be disabled in mapster32.cfg
* fixes USE_OPENGL=0 build
git-svn-id: https://svn.eduke32.com/eduke32@1890 1a8010ca-5511-0410-912e-c29ae57300e0
* more useful auto-red wall feature: if no structure-changing operations have been applied after highlighting and duplicating, now also paste 'visual' fields of outer walls (this is one example of the use of a system that temporarily keeps track of nextwalls for former red lines)
* multi-pkies now have individual parallaxyscale
git-svn-id: https://svn.eduke32.com/eduke32@1886 1a8010ca-5511-0410-912e-c29ae57300e0
* support for free mixing of multi- and single-tile parallaxed skies in classic
* make visibility independent of yxaspect and viewingrange in OpenGL modes
-- editor:
* when dragging walls, restore pixel width after that (only for the left and right walls of pointhighlight, and its nextwalls, if any)
* pasting on walls and auto-aligning them now carries over a few more fields
-- fixes:
* visibility in OpenGL modes wasn't incremented gradually (regression due to making 'clamp' an inline function instead of a macro)
* memory corruption due to calling qlz_compress with less than the recommended surplus storage of 400 bytes
* decorative sprites in the mirror showing non-flipped
* make the subway SE message (much) more helpful by showing which sector the game considers to be the track sector
git-svn-id: https://svn.eduke32.com/eduke32@1882 1a8010ca-5511-0410-912e-c29ae57300e0
* Polymer light access to m32script (light[<lightidx>].<field>). As an application, provide a state 'insertlights' that takes the currently active lights and puts them into the map as SEs (e.g. for maphack recovery).
* Prototype of a mechanism to gray out certain portion of a map, making them inactive to various, but not all, editing operations. Highlighting a set of sectors and pressing Ctrl-R will make the Z bounds be [(least ceiling z), (greatest floor z)] of all selected ones, pressing Ctrl-R when no sectors are highlighted will reset them. Not sure if it's for production use at this stage...
* The 'align walls' feature [.] now has three independently toggleable behaviours: recurse nextwalls (toggled when Ctrl is pressed), iterate point2s (disabled when Shift is pressed), and also copy pixel width (toggled when Alt is pressed).
* Make shades clamp instead of overflowing in the editor
Fixes:
* crash when carrying out certain operations on walls with xrepeat 0
* the Pause key on linux. Also make demo recording start on Shift-ScrollLock because ScrollLock alone is too easily pressed when pausing
git-svn-id: https://svn.eduke32.com/eduke32@1877 1a8010ca-5511-0410-912e-c29ae57300e0
* Tag labeling system for 'link'-type tags, including saving and restoring the tag labels to a separate file '<mapname>.maptags'. Whether a tag is eligible for linking, is determined by a hardcoded (but extensible via m32script) function.
git-svn-id: https://svn.eduke32.com/eduke32@1867 1a8010ca-5511-0410-912e-c29ae57300e0
* Consolidate the various, slightly different, methods of bounding a sprite between a sector's ceiling and floor into one common function
* Fixes for accumulated bugs: shade preview, r_shadescale_unbounded, and a couple of unreported ones
* Yaks, gnus, and bisons...
git-svn-id: https://svn.eduke32.com/eduke32@1854 1a8010ca-5511-0410-912e-c29ae57300e0
Engine stuff:
* Add 'r_shadescale_unbounded' cvar. When set to 0, OpenGL renderers should never
draw completely black objects (currently only implemented for Polymost)
Mapster32:
* Add 'r_shadescale' to config
* In 3D mode, make SPACE behave the same as holding down a mose button: the
currently pointed-at object is locked. Required some modification of a.m32
to play well (i.e. not reset SPACE). This is useful by itself but more so
in conjunction with the next point
* make Alt behave as a modifier with PGUP/PGDN: when aiming at a 2-sided wall,
move the other side's sector's ceiling or floor (only this is new).
* Auto-alignment of walls can be controlled in a finer grained fashion now:
When pressing '.', only the immediate neighbors get aligned. Use Ctrl-. for
the old behaviour.
* When inserting a point in 2D mode, auto-align the neighboring wall
git-svn-id: https://svn.eduke32.com/eduke32@1848 1a8010ca-5511-0410-912e-c29ae57300e0
* Have the corruption checker catch this case among a few other new ones. Rename OSD command 'autocorruptcheck' to simply 'corruptcheck' with options 'corruptcheck <seconds>', 'corruptcheck now' and 'corruptcheck tryfix'.
* When pasting sector selection into valid player space (releasing AltGr), ask whether a surrounding outer loop should be created since this is probably not always desired.
git-svn-id: https://svn.eduke32.com/eduke32@1790 1a8010ca-5511-0410-912e-c29ae57300e0
engine:
* sector-like sprite clipping now works with x- xor y-flipped actual sprites
mapster32:
* corruption checker has been hooked up to loading/saving routines to inform/warn the user
* also warn if mouse pointer is over corrupt wall which is shown in pink then: you should not move such a wall!
* faster map loading by deferring polymer_loadboard to 3d mode entrance (also removes some 'glGetTexLevelParameteriv returned GL_FALSE' warnings)
* more logical maphack light handling, the logic is still a bit dodgy though
* some menu and misc. function fixup
* redundancy elimination...
API:
* added consts various for 'char *filename' parameters
* loadboard() now accepts bit 4 for flags (formerly 'fromwhere')
git-svn-id: https://svn.eduke32.com/eduke32@1760 1a8010ca-5511-0410-912e-c29ae57300e0
First, there's a new script for the generation of highpalookup images. Python 2.6, NumPy and PIL are required.
Next, the map corruption checker has been ported to C. This is so that Mapster32 will be able to take decisions more cleverly based on the corruptness of the map. It also catches a few more issues like inconsistent nextwall/nextsector tags now.
Finally, link the executables with --large-address-aware on Windows. This gives a gig more private virtual memory on XP when booting with /3GB. YMMV, but I can play IW2 with Polymer now.
git-svn-id: https://svn.eduke32.com/eduke32@1751 1a8010ca-5511-0410-912e-c29ae57300e0
The bulk of this commit is "code rape"--or rather, caressing, rewritten for readability.
Actual changes/fixes:
- fixed "walking" in 2d mode
- fixed DELETE key in OSD in SDL build
- main loop in general (timeout for event wait after 200 ms so that highlights blink)
- access to some pr_override* variables in m32script (suggested by Roma Loom)
- API cleanup (added statics and consts here and there)
git-svn-id: https://svn.eduke32.com/eduke32@1644 1a8010ca-5511-0410-912e-c29ae57300e0
