- The original Doom renderer was inclusive for all right edges. This was
fine for the wonky projection it did. This was not fine for a standard
perspective divide, so I had to change walls to be right-edge exclusive
when I changed the projection. I only touched what was needed. Until
now. The right edge is always exclusive now, which should prevent any
more bugs related to mixing the two clusivities incorrectly.
- Renamed the 'noabsolute' parameter in side_t::GetLightLevel to 'is3dlight', what it actually is, to avoid the confusion that caused the abovementioned error.
- fixed: The Down2Up render path for sides of 3D floors had the 'is3dlight' check inverted.
This wants `curline->sidedef`, which is the 3D sidedef currently being
drawn. `sidedef` appears to be the last regular sidedef that happened
to be drawn? The perils of globals.
because they're kind of a pain to type when all uppercase.
- Also, make its sx1 and sx2 members shorts, so it takes less space, since
it's getting crammed into a vissprite now.
- This still doesn't use all the sprite properties correctly. It also
looks like they're going to need different code to build the clipping
arrays. But at least wall sprites are drawn at the proper angle now!
- R_AddLine() and R_RenderDecal() had nearly identical code for setting up
texture mapping. These have now been spun off into methods of
FWallCoords and FWallTmapVals.
the camera is on. Mostly, this means testing the distance of the camera to the plane rather
than computing the plane's Z at the camera and comparing that with the camera's Z.
SVN r4220 (trunk)
because it was an extension of the normal wall clipping process. Since a stacked sector
above you doesn't draw a floor, it wouldn't clip any midtextures to the floor either.
R_RenderMaskedSegRange() now checks this directly when rendering inside a stacked sector.
SVN r3647 (trunk)
of its clipping information before it was drawn. (On the other hand, I have no idea what this
ds->bkup and refreshing stuff is about, so I might have broken something somewhere else.)
SVN r3602 (trunk)
be used when for walls and floors when the renderer is paletted. The format
is very simple:
rgbtex1 paltex1
rgbtex2 paltex2
...
The first texture is the one to be used normally, and the second is the one
to be used in paletted modes.
The vid_nopalsubstitutions cvar can be used to ignore this lump.
SVN r3311 (trunk)
ignored the Y locations of patches drawn on two-sided midtextures and always drew them at the
top of the texture. Added a compatibility flag.
SVN r3205 (trunk)
* Added new cvar, r_3dfloors for testing, so for example, you can see the FPS difference.
* ds_p->bkup is not always allocated.
* Fixed particles visible through 3D floors.
* Fixed FAKE3D flag names.
SVN r3178 (trunk)
- Fixed: When loading non-UDMF maps, things did not have their conversation field zero'ed.
- Added an assert for the FAKE3D_REFRESHCLIP case at the end of R_RenderMaskedSegRange(), because Valgrind indicates this is being run
without ds->bkup being set to something valid. I do not immediately know how this should be fixed.
SVN r3130 (trunk)
former used fistp, which is not portable across platforms, so cannot be
used in the play simulation. They were only suitable for the renderer.
xs_Float.h also has a very fast float->fixed conversion, so FLOAT2FIXED
uses that now.
(And I also learned that the FPU's round to nearest is not the rounding I
learned in grade school but actually Banker's Rounding. I had no idea.)
(Also, also, the only thing that could have made quickertoint faster than
toint was that it stored a 32-bit int. I never timed them, and I doubt in
practice there was any real difference between the two.)
- Changed atan2f to atan2. Using floats is not a win, because the result is
returned as a double on the x87 stack, which the caller then needs to cast
down to a float using fst/fld.
SVN r1990 (trunk)
may still be needed. In particular, when drawing a seg with a midtexture is
split by foreground geometry, the first drawseg generated from it will have
the correct WallSZ1,2 values, but subsequent ones will have whatever
R_RenderDecal() left behind. These values are used to calculate the upper
and lower bounds of the midtexture. (Ironically, my work to Build-ify things
had done away with these globals, but that's gone now.)
SVN r1938 (trunk)
completely ignore them, either).
- Separated light level fixing out of player_t's fixedcolormap parameter.
Using a fixed light level (e.g. PowerTorch) will no longer wipe out
colored lighting.
- Moved the blending rectangle drawing into a separate discrete stage, since
doing it while copying the 3D view window to the display now blends
underneath the weapon instead of on top of it.
- Consolidated the special colormaps into a single 2D table.
- Tweaked the special colormaps slightly to make the true color results more
closely match the paletted approximations.
- fb_d3d9_shaders.h was getting unwieldy, so I moved the shaders out of the
executable and into zdoom.pk3. Shaders are still precompiled so I don't need
to pull in a dependancy on D3DX.
- Added a few more shaders to accomodate drawing weapons with all the in-game
lighting models. These are accessed with the new DrawTexture tags
DTA_SpecialColormap and DTA_ColormapStyle.
- Player weapon sprites are now drawn using Direct3D and receive all the
benefits thereof.
SVN r1858 (trunk)
flag set, causing it to be ignored during rendering. Why this didn't cause
more trouble, I don't know.
- Fixed: The UDMF parser passed the wrong value for "default alpha" for
TranslucentLine to P_FinishLoadingLineDef().
SVN r1775 (trunk)
* scalex_top
* scaley_top
* scalex_mid
* scaley_mid
* scalex_bottom
* scalex_bottom
- Added sidedef versions of the linedef flags wrapmidtex and clipmidtex (via
UDMF; names are the same). If the flag is set on the line, it applies to
both sides. Otherwise, each side can control them individually.
SVN r1645 (trunk)
replaced it did the check at the center of the area intersected by the
sprite and the drawseg, whereas 2.0.63 only did the check at the location
of the sprite on the map.
SVN r1411 (trunk)
- fixed: The nextmap and nextsecret CCMDs need to call G_DeferedInitNew instead of G_InitNew.
- merged MAPINFO branch back into trunk.
SVN r1393 (trunk)
so that all files are included by a central one instead of compiling
each one separately. This speeds up the compilation process by 25%
when doing a complete rebuild in Visual C.
- Cleaned up more header dependencies.
SVN r1226 (trunk)
- Fixed: The smoothlighting code in side_t::GetLightLevel relied on
the global 'linedef' variable for automatic fake contrast although
this issue had already been fixed for the original code here.
- Replaced static string buffers with FString in FONTDEFS parser.
SVN r1194 (trunk)
that animated icons can be done with it.
- Changed FImageCollection to use a TArray to hold its data.
- Fixed: SetChanHeadSettings did an assignment instead of comparing
the channel ID witg CHAN_CEILING.
- Changed sound sequence names for animated doors to FNames.
- Automatically fixed: DCeiling didn't properly serialize its texture id.
- Replaced integers as texture ID representation with a specific new type
to track down all potentially incorrect uses and remaining WORDs used
for texture IDs so that more than 32767 or 65535 textures can be defined.
SVN r1036 (trunk)
- Grouped the sector plane texture transformation options into a separate
structure and replaced all access to them with wrapper functions.
SVN r1033 (trunk)
were doing some things in their destructor that needed to be done in the
Destroy method.
- Rewrote the interpolation code. Interpolations are no longer some objects
that are separate from the rest of the engine. Instead, they are owned by
the thinkers starting them. Also, polyobjects only spawn a single interpolation
for each polyobject instead of a single one for each vertex.
Also, different types of interpolation objects are used for different types
of interpolation so that they can do some additional work if eventually needed.
SVN r1018 (trunk)
texture definitions. HIRESTEX is still supported but deprecated.
- Removed all 16 bit values from texture manager.
- Changed: The texture manager now sorts all textures for a WAD by type
to avoid priority issues with HIRESTEX defined textures.
- Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is
always the same for both sides of a linedef. This also makes handling
this in the UDMF parser easier because the linedef parsing function does
not need to access the sidedef data.
- Added new ZDoom specific UDMF linedef and sidedef properties to map parser.
- Added new ZDoom specific UDMF sector properties to map parser.
- Added class definitions for new interpolators that are better
equipped to interact with the interpolated objects.
- Separated interpolation code into its own file r_interpolate.cpp.
- Added some simple customization options to the end game screens.
- Fixed: Polyobject detection in the internal node builder did not work
anymore due to some code rearrangement for UDMF map loading. To keep
it compatible between all map formats the THINGS lump of binary format
maps must be loaded before building the nodes. This also means that
the spawning itself can be done in the same function for all map types
(except Build) now.
- Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse
which is more what would be expected from this option.
- Fixed: Weapons and ammo items that were modified by Dehacked gave full
ammo when being dropped by monsters. To properly handle this the
handling of spawning Dehacked modified pickups was changed to use
the DECORATE replacement feature instead of hacking the spawn state
of the original item and calling a spawn function from there.
SVN r1001 (trunk)
automatic fake contrast.
- Changed: Fake contrast now uses the WALLF_AUTOCONTRAST globally instead
of manipulating the sides' light values individually. This allows changing
the fake contrast at run time and also allows adding individual relative
lighting on top of it which is a planned UDMF feature.
SVN r991 (trunk)
of all types on the same linedef. Also added a 'first side only' flag. This
is not usable from Hexen or Doom format maps though but in preparation of
the UDMF format discussed here:
http://www.doomworld.com/vb/source-ports/43145-udmf-v0-99-specification-draft-aka-textmap/
- Changed linedef's alpha property from a byte to fixed point after seeing that
255 wasn't handled to be fully opaque.
- fixed a GCC warning in fmodsound.cpp
SVN r954 (trunk)
from a savegame.
- Fixed: side_t::StopInterpolation called setinterpolation instead of
stopinterpolation. Also moved the clearinterpolation call in
P_SetupLevel after the P_FreeLevelData to make absolutely sure that
nothing in there can leave an interpolator behind by accident.
- Applied Linux fixes by Jim.
SBARINFO update by Blzut3:
- Fixed: the playerclass command needed a null pointer check to prevent
crashing on respawn.
- Fixed: Mug Shot states were not reset on respawn.
- Removed keepoffsets flag since apparently it was keeping the offsets by
default. The means that the only thing not affected by the offsets was using
nullimage as a background. Since I wasn't able to get a result I liked I'm
going to say that if you want a black background with high res positioning
you will have to create your own bar image. Maybe I'll fix it some other
time.
- Added: monospacefonts variable which allows for all of the fonts to be
monospaced by a specified character (from their fontset of corse).
- Made SBarInfo recognize the bar names for the Strife popups but they don't
do anything beyond that. The names are: popuplog, popupkeys, and popupstatus.
- Started converting the drawing routine to be more flexable towards high
resolution status bars. (Only did one call so far.)
SVN r835 (trunk)
Since it uses fixed point parameters it can only be used in scripts though.
- Added flags parameters to all wall scroller specials that didn't use
all 5 args.
- Separated scrolling of the 3 different texture parts of a sidedef.
While doing this I did some more restructuring of the sidedef structure
and changed it so that all state changes to sidedefs that affect rendering
have to be made with access functions. This is not of much use to the
software renderer but it allows far easier caching of rendering data
for OpenGL because the only place I need to check is in the access functions.
SVN r832 (trunk)
- Added .txt files to the list of types (wad, zip, and pk3) that can be
loaded without listing them after -file.
- Fonts that are created by the ACS setfont command to wrap a texture now
support animated textures.
- FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn
with the hardware 2D path instead of being restricted to the game palette.
- Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1
on a Radeon 9000.
- Added back the off-by-one palette handling, but in a much more limited
scope than before. The skipped entry is assumed to always be at 248, and
it is assumed that all Shader Model 1.4 cards suffer from this. That's
because all SM1.4 cards are based on variants of the ATI R200 core, and the
RV250 in a Radeon 9000 craps up like this. I see no reason to assume that
other flavors of the R200 are any different. (Interesting note: With the
Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the
debug Direct3D 9 runtime, but it works perfectly fine with the retail
Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its
math inside pixel shaders. That would explain perfectly why I can't use
constants greater than 1 with PS1.4 and why it can't do an exact mapping to
every entry in the color palette.
- Fixed: The software shaded drawer did not work for 2D, because its selected
"color"map was replaced with the identitymap before being used.
- Fixed: I cannot use Printf to output messages before the framebuffer was
completely setup, meaning that Shader Model 1.4 cards could not change
resolution.
- I have decided to let remap palettes specify variable alpha values for
their colors. D3DFB no longer forces them to 255.
- Updated re2c to version 0.12.3.
- Fixed: A_Wander used threshold as a timer, when it should have used
reactiontime.
- Fixed: A_CustomRailgun would not fire at all for actors without a target
when the aim parameter was disabled.
- Made the warp command work in multiplayer, again courtesy of Karate Chris.
- Fixed: Trying to spawn a bot while not in a game made for a crashing time.
(Patch courtesy of Karate Chris.)
- Removed some floating point math from hu_scores.cpp that somebody's GCC
gave warnings for (not mine, though).
- Fixed: The SBarInfo drawbar command crashed if the sprite image was
unavailable.
- Fixed: FString::operator=(const char *) did not release its old buffer when
being assigned to the null string.
- The scanner no longer has an upper limit on the length of strings it
accepts, though short strings will be faster than long ones.
- Moved all the text scanning functions into a class. Mainly, this means that
multiple script scanner states can be stored without being forced to do so
recursively. I think I might be taking advantage of that in the near
future. Possibly. Maybe.
- Removed some potential buffer overflows from the decal parser.
- Applied Blzut3's SBARINFO update #9:
* Fixed: When using even length values in drawnumber it would cap to a 98
value instead of a 99 as intended.
* The SBarInfo parser can now accept negatives for coordinates. This
doesn't allow much right now, but later I plan to add better fullscreen
hud support in which the negatives will be more useful. This also cleans
up the source a bit since all calls for (x, y) coordinates are with the
function getCoordinates().
- Added support for stencilling actors.
- Added support for non-black colors specified with DTA_ColorOverlay to the
software renderer.
- Fixed: The inverse, gold, red, and green fixed colormaps each allocated
space for 32 different colormaps, even though each only used the first one.
- Added two new blending flags to make reverse subtract blending more useful:
STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that
gets blended with the background, since that seems like a good idea for
reverse subtraction. They also work with the other two blending operations.
- Added subtract and reverse subtract blending operations to the renderer.
Since the ERenderStyle enumeration was getting rather unwieldy, I converted
it into a new FRenderStyle structure that lets each parameter of the
blending equation be set separately. This simplified the set up for the
blend quite a bit, and it means a number of new combinations are available
by setting the parameters properly.
SVN r710 (trunk)
I got rid of the old tx and ty CVARs because they made the texture scaling
much more complicated than it was actually needed (and besides, they were completely
useless except for testing purposes anyway.)
SVN r522 (trunk)
- Fixed: Placing a /* */ comment at the very end of a file without a
terminating newline would not parse reliably.
- Added a NULL WallSpriteTile check to R_RenderDecal().
SVN r365 (trunk)
- The stat meters now return an FString instead of sprintfing into a fixed
output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
- For consistancy with the other integral types, byte is no longer a
synonym for BYTE.
- Most uses of BOOL have been change to the standard C++ bool type. Those
that weren't were changed to INTBOOL to indicate they may contain values
other than 0 or 1 but are still used as a boolean.
- Compiler-provided types with explicit bit sizes are now used. In
particular, DWORD is no longer a long so it will work with both 64-bit
Windows and Linux.
- Since some files need to include Windows headers, uint32 is a synonym
for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
was all it contained.
SVN r326 (trunk)
savegames at this point in time.
- Fixed: R_ClearPlanes() did not clear skybox planes for a full clear.
- Streamlined zip file loading by delaying the processing of the local file
header until it is actually needed.
SVN r247 (trunk)
and aren't limited to the script's activator.
- Added GetSectorLightLevel(tag), GetActorCeilingZ(tid) and
SetActorPosition(tid, x, y, z, fog) ACS functions.
- Fixed: First initialization of camera textures should not mark the rendered
lines as mapped.
SVN r198 (trunk)
This prevents the front ceiling from being moved up if there has been no
texture defined to draw on the wall. This makes various parts of The
Darkest Hour render properly again while still allowing the crosses in
heroes2.wad and lamasery.wad to render correctly.
SVN r130 (trunk)
Valgrind seems to say so.
- Fixed: The FWadCollection destructor needs to use free to free the LumpInfo
and Wads arrays.
- Fixed: The ColorMapKiller needs to use the delete[] form of delete.
- Fixed: FConfigFile::ClearCurrentSection() should be calling the delete[] form
of delete to free the entry.
- Fixed: FPatchTexture::MakeTexture() does not need to blindly recreate the
Spans if they already exist.
- Fixed: The FMultiPatchTexture destructor did not call its Unload() method.
- Restored the original padding calculation to FMultiPatchTexture::MakeTexture().
I believe the Valgrind errors were caused by accessing off the end of the
screen buffer, not from accessing off the end of a texture.
SVN r98 (trunk)
- Added support for wrapping midtextures vertically.
- Since zdoom.wad is now zdoom.pk3, the default mapinfos can use full pathnames.
So now they do.
- Fixed: The DSimpleCanvas constructor used a pitch too narrow on screens wider
than 640 pixels when using a non-AMD processor and the processor's L1 cache
line size could not be determined. I think this should fix the issue of
weirdly rendered 8 pixel wide borders on the left and right of the screen that
some people experienced.
- Fixed: The secnodes were never freed.
SVN r93 (trunk)
actually work.
- Turned the list of TabCommands into a TArray because I saw lots of console
commands in the memory leak report at exit. Then I realized those were actually
key bindings, so I changed the Bindings and DoubleBindings arrays into FString
arrays.
- Fixed: FStringCVar was missing a destructor.
- Added TArray::Insert().
- Fixed: TArray::Delete() used memmove().
- Renamed Malloc(), Realloc(), and Calloc() to M_Malloc(), M_Realloc(), and
M_Calloc() so that the debug versions can be defined as macros.
- Enabled the CRT's memory leak detection in WinMain().
- Moved contents of PO_DeInit() into P_FreeLevelData().
- Removed "PolyBlockMap = NULL;" from P_SetupLevel(), because the P_FreeLevelData()
call it makes next does the exact same thing, but also freeing it if needed.
- Fixed: Unneeded memcpy in UnpackUserCmd() when ucmd and basis are the same
SVN r75 (trunk)
- Removed doom.x, heretic.x and strife.x from the SVN repository. These
are generated files.
- Fixed: A_PainDie has to check whether a valid target exists before
calling IsFriend.
- Fixed: FDecalLib::FindAnimator needs a signed counter to work properly.
May 1, 2006 (Changes by Graf Zahl)
- Added support for game specific pickup messages, if only to be able
to define Raven's invulnerability item in DECORATE.
- Removed A_TreeDeath because it is no longer used.
- Fixed: When picking up a PowerupGiver for an active powerup the
blend color and the duration were transferred to a temorary item
and never took effect. They have to be trnasferred to the newly created
powerup item before trying to give it to the player, not afterward.
- Made the colormap of the InvulnerabilitySphere item specific.
The base power class still needs to have its color adjusted
per game though and since Raven's invulnerability item is used in both
Hexen and Heretic it can't define its own colormap/blend.
- Separated the invulnerability colormaps from the game being played
and made them item specific. They can also be specified as regular
blend colors in DECORATE now.
- Converted a_hereticarmor.cpp and most of a_doomartifacts.cpp,
a_hereticartifacts.cpp and a_heretickeys.cpp to DECORATE.
- Changed the Soulsphere to be a real health item with the Dehacked
modifications made in d_dehacked.cpp as for most other items which
need to be adjusted.
- Added IF_BIGPOWERUP flag to AInventory to expose the RESPAWN_SUPER
dmflag to DECORATE. Also removed the now obsolete ShouldRespawn methods
from AInvulnerabilitySphere and ABlurSphere.
- Converted a_splashes.cpp to DECORATE.
- Converted most of a_debris.cpp to DECORATE.
SVN r73 (trunk)
- Changed: Decal scales now use full precision fixed point numbers.
- Changed: Keeping impact decals in their own statlist is enough to keep track
of them for when one needs to be destroyed. There's no need to maintain a
separate list for them.
- Fixed: Decal actors did not spread their decals across neighboring walls.
- Fixed: Decal groups did not initialize their IDs and could not be reliably
used with the decal actor.
- Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal()
now uses the decal's LeftDistance to calculate its visible location, so it
always stays in sync with the wall's vertices. This also lets me dump some
code from the polyobjects that maintained the decals' (x, y) coordinates.
Also, the decals' x and y information is redundant and can be removed.
Doing this revealed a bug with slider decals and horizontal sliding:
That is, it didn't work at all. I have opted to simply remove the horizontal
sliding support so that I don't have to worry about what happens when a
decal slides across the edge of a wall.
- Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number.
It should be 2.30 fixed point.
SVN r35 (trunk)
returning from one function to another function when the function that
was called was used as part of an expression.
- Fixed: Using Thing_Hate with arg0 (hater) set to 0 from an open script
could crash.
- Fixed: Some items along ledges in Hexen's MAP32 (Orchard of Lamentations)
appeared at the bottom of the ledge (and consequently inside it) instead
of on top of it because the items were placed directly on the lines.
AActor::LinkToWorldForMapThing() needs to use the original R_PointOnLineSide()
code to handle situations like this. Previously, it just used the original
code for straight horizontal/vertical lines and used the new code for
diagonal lines.
- Fixed: FWadCollection::MergeLumps() used in incorrect realloc.
- Fixed: FPlayList::NextLine() did not properly handle blank lines in the
playlist.
- Changed: Decals now use lightweight thinkers instead of actors. (76 bytes
versus 396, so you save 320k if you have 1024 decals present.)
- Fixed: Wads added with pullin were loaded immediately after the IWAD.
Exec files are now processed immediately before -file but after autoloading
wads in D_DoomMain().
- Fixed: sdl/i_system.h unconditionally defined SHARE_DIR, preventing
redefinition from the command line.
- Fixed: The standard way to include SDL.h is <SDL.h>, not <SDL/SDL.h>.
- Fixed: Returned FActiveInterpolation::HashKey()'s return type to size_t,
avoiding a pointer truncation warning.
SVN r30 (trunk)
