As a result the old 'Group' property could be removed and all other means to get a section name were disabled.
As an example, if the code gets 'doom.doom2.commercial' it will use the following sections in this order:
global.autoload
doom.autoload
doom.doom2.autoload
doom.doom2.commercial.autoload.
- Multi-directory archives (e.g. zips) now support filtering lumps
depending on the loaded IWAD. The search rules are the same as for the
Autoload entries in the user's ini. For instance, if you are playing
Doom 2, the following filters will be applied:
* "filter/doom2/*"
* "filter/doom/*"
They will be renamed to strip out the "filter/doom2/" and "filter/doom/"
parts and will be ordered so they take precedence over any files not
inside a filter/ directory. Any files inside another filter/ directory
(e.g. "filter/hexen/*") will be ignored.
- Command-line console commands are executed before a level is entered, so
trying to use +warp to position yourself at a specific location will not
work. We now specially handle this command so that it does work.
took far too long to reach this point.) Manual axis configuration is
currently disabled, since I need to rewrite that, too. The eventual point of
this is that the code will be modular enough that I can just plop in
routines for XInput controllers and driver-less PlayStation 2 adapters
without much fuss, since the old joystick code was very much DirectInput-
centric.
SVN r1672 (trunk)
- removed gamemode variable. All it was used for were some checks that
really should depend on GI_MAPxx.
- Externalized all internal gameinfo definitions.
- added include to MAPINFO parser.
- split IWAD detection code off from d_main.cpp into its own file.
- disabled gamemission based switch filtering because it is not useful.
- added GAMEINFO submission by Blzut3 with significant modifications. There
is no GAMEINFO lump. Instead all information is placed in MAPINFO, except
the data that is needed to decide which WADs to autoload.
SVN r1497 (trunk)
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
that animated icons can be done with it.
- Changed FImageCollection to use a TArray to hold its data.
- Fixed: SetChanHeadSettings did an assignment instead of comparing
the channel ID witg CHAN_CEILING.
- Changed sound sequence names for animated doors to FNames.
- Automatically fixed: DCeiling didn't properly serialize its texture id.
- Replaced integers as texture ID representation with a specific new type
to track down all potentially incorrect uses and remaining WORDs used
for texture IDs so that more than 32767 or 65535 textures can be defined.
SVN r1036 (trunk)
- Separated mapthing2_t into mapthinghexen_t and the internal FMapThing so
that it is easier to add new features in the UDMF map format.
- Added some initial code to read UDMF maps.
SVN r956 (trunk)
to handle M4 and 5 in Doom and Heretic.
- Added P_CheckMapData functions and replaced all calls to P_OpenMapData that
only checked for a map's presence with it.
- Added Martin Howe's player statusbar face submission.
- Added an 'adddefaultmap' option for MAPINFO. This is the same as 'defaultmap'
but keeps all existing information in the default and just adds to it. This
is needed because Hexen and Strife set some information in their base
MAPINFO and using 'defaultmap' in a PWAD would override that.
- Fixed: Using MAPINFO's f1 option could cause memory leaks.
- Added option to load lumps by full name to several places:
* Finale texts loaded from a text lump
* Demos
* Local SNDINFOs
* Local SNDSEQs
* Image names in FONTDEFS
* intermission script names
- Changed the STCFN121 handling. The character is not an 'I' but a '|' so
instead of discarding it it should be inserted at position 124.
- Renamed indexfont.fon to indexfont so that I could remove a special case
from V_GetFont that was just added for this one font.
- Added a 'dumpspawnedthings' CVAR that enables a listing of all things in
the map and the actor type they spawned.
SVN r882 (trunk)
or scripts. ColorSetter (#9038) sets the sector's color and FadeSetter (#9039)
sets the fog color.
- added new flags MF5_ALWAYSFAST and MF5_NEVERFAST. These flags unconditionally
enable or disable fast movement logic, regardless of skill settings.
- added an abstraction layer for skill related settings. This is a preparation
for implementing custom skill definitions but right now all it does is
returning the original values but keeping the related information all in one
place
SVN r557 (trunk)
- The stat meters now return an FString instead of sprintfing into a fixed
output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
- For consistancy with the other integral types, byte is no longer a
synonym for BYTE.
- Most uses of BOOL have been change to the standard C++ bool type. Those
that weren't were changed to INTBOOL to indicate they may contain values
other than 0 or 1 but are still used as a boolean.
- Compiler-provided types with explicit bit sizes are now used. In
particular, DWORD is no longer a long so it will work with both 64-bit
Windows and Linux.
- Since some files need to include Windows headers, uint32 is a synonym
for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
was all it contained.
SVN r326 (trunk)
dialogs.
- Added Thing_Raise special that allows Arch-Vile like resurrections from scripts
or DECORATE states.
- Added a RadiusDamageFactor property for actors. This replaces the hard coded
factor of 0.25 for Hexen's players.
- Added new SpawnProjectile function to ACS. It's the same as Thing_Projectile2
but the projectile is specified by name, not spawn ID.
- Added MAPINFO option to set the compatibility flags. If this is done these
explicit settings will take precedence over the compatflags CVAR.
SVN r164 (trunk)
merge a lot of these static destructor-only structs into regular
functions added to the exit chain with atterm so that they can be called
in a deterministic order and not whatever order the linker decides to put
them in. (Interestingly, the amount of memory used when repeatedly
executing the same map command at the console varies up and down, but it
now stays relatively stable rather than increasing unbounded.)
- Fixed: The list of resolutions in the video modes menu was not freed
at exit.
- Fixed: mus_playing.name was not freed at exit.
- Fixed: SN_StopAllSequences() should be called at the start of
P_FreeLevelData(), not just before the call to P_SetupLevel() in
G_DoLoadLevel(), so it can run even at exit. And C_FullConsole() can
call P_FreeLevelData() to free more memory too.
- Fixed: StatusBar was not freed at exit.
- Fixed: spritesorter was not freed at exit.
- Fixed: Bad things happened if FString's data pool was destroyed before
all C_RemoveTabCommand() calls were made.
- Added an overload for FArchive << FString.
- Fixed: The players' log text was not freed at exit.
- Fixed: Bot information was not freed at exit.
- Fixed: doomcom was not freed at exit. But since it's always created,
there's no reason why it needs to be allocated from the heap. My guess
is that in the DOS days, the external packet driver was responsible for
allocating doomcom and passed its location with the -net parameter.
- Fixed: FBlockNodes were not freed at exit.
- Fixed: Openings were not freed at exit.
- Fixed: Drawsegs were not freed at exit.
- Fixed: Vissprites were not freed at exit.
- Fixed: Console command history was not freed at exit.
- Fixed: Visplanes were not freed at exit.
- Fixed: Call P_FreeLevelData() at exit.
- Fixed: Channel, SoundCurve, and PlayList in s_sound.cpp were not freed at
exit.
- Fixed: Sound sequences were not freed at exit.
- Fixed: DSeqNode::Serialize() did not resize the m_SequenceChoices array
when loading.
SVN r106 (trunk)
of sync becase the RNG seed was being altered during recording but not
during playback. This was caused by an inappropriate fix for a similar
problem: -record calls G_InitNew() before it actually starts recording
the demo, but -playdemo calls G_InitNew() after it starts playback. So
the rngseed stored in the demo was already altered. The correct thing
to do is not to prevent the rngseed from changing during playback but
to move the call to G_InitNew() after the call to G_BeginRecording().
- Fixed: After respawning in a demo, demo playback was prematurely
terminated.
SVN r50 (trunk)
