players are on teams.
- Set TEAM_None back to 255. Since a player's team has already been accessible
through ACS, needlessly redefining this is a bad thing to do, since it can
break existing maps. 255 different teams should still be more than enough.
- Fixed: At certain resolutions, there was a one pixel row between the status
bar and the rest of the screen, thanks to rounding error.
- Added automatic batching of quads to D3DFB. Screens with a lot of text are
ever-so-slightly faster now, though still only about half the speed of
sofware-only text. I suppose the only way to see a marked improvement is
going to be by stuffing multiple glyphs in a single texture.
- Fixed: Crosshairgrow's animation was not framerate-independent.
SVN r668 (trunk)
and into the vertex data.
- Added functions for doing line drawing with Direct3D, including a new pair
of functions to do batched line drawing so that the map can actually be
drawn faster in hardware than in software (instead of an order of magnitude
slower).
SVN r663 (trunk)
shader seems to be producing crappy output, so it's disabled for now.
Specifically, it produces distorted output at regular intervals for
textures that aren't power-of-2-sized, and it's still doing visible
filtering when the texture is rendered at its original size, so
obviously it's not doing something right.
- Fixed the use of power-of-2-sized native textures for smaller game
textures again.
- Fixed: D3DFB did not restore all the state it needed to after resetting
the device.
- Fixed: R_DrawTopBorder() must clip itself around the 3D view, since it's
now drawn later.
- With full software rendering, palette flashes once again effect the whole
screen.
Changes I neglected to put in the previous commit log:
- Moved the view border drawing into the 2D mode part. When using Begin2D()
now, the only part of the software buffer that gets updated to the screen
is the part with the actual 3D scene and only if you tell it to.
- Fixed a D3D memory leak on every frame in windowed mode and the same thing
for the screen wipes. Note to self: If it's an interface, be sure to
Release it, because it will be AddRef'ed before being returned to you.
- Moved the BlendView() call out of FBaseStatusBar::Draw() so that it can be
applied before copying the 3D scene to the screen underneath the 2D parts.
- Restored the console's darkening level to its old table-based amount.
- Fixed D3DFB::SetColorOverlay()'s incorrect calculations.
- Fixed the D3D screen wipes for letterboxed modes.
SVN r662 (trunk)
since I couldn't think of any reason why it should be grabbed at any other
time. (This only applies to windowed mode, where it makes sense to let the
OS have control of the pointer.)
SVN r661 (trunk)
a long-abandoned experiment to write directly to video memory instead of
to a temporary buffer in system meroy.
- Added Direct3D versions of the melt and burn screenwipes.
- Fixed the strip sizes for the melt screenwipe to match what Doom would have
produced on a 320x200 screen, rather than producing more, thinner strips
for wider screens.
SVN r659 (trunk)
allocated. (I wonder if D3D actually handles this automatically when you use
D3DPOOL_MANAGED, because I'm pretty sure my laptops's x300 doesn't support
non-power-of-2 texture sizes, yet it worked just fine before.)
- Fixed vertical positioning of 2D elements in letterboxed modes.
SVN r653 (trunk)
drawn to a texture, then that texture is copied to the real back buffer
using a gamma-correcting pixel shader. In fullscreen mode, SetGammaRamp
is used.
- Fixed flashing of vid_fps display when fps > 1000.
- Fixed loading of RGB textures for native 2D mode.
- Changed the first rotozoomer's data because it just became too obvious when
the backdrop is drawn with a full 256 distinct colors available.
- Set the player backdrop to update no more frequently than 35 FPS, so opening
the player setup menu before starting a game won't produce a very fast
moving backdrop.
- Changed the player backdrop into a texture so that it can be drawn like
anything else.
SVN r648 (trunk)
- Moved the common code of ACS and DECORATE translation generation into the
FRemapTable class.
- Fixed: The DECORATE translation code was not changed for the new data structures.
- Expanded range of ACS and DECORATE translations to 65535.
- Fixed: R_CopyTranslation was not altered for the new functionality.
I removed the function and replaced the one use with a simple assignment.
SVN r644 (trunk)
palettes smaller than 256 entries with the shader I wrote for it. Is there
a list of gotchas like this listed some where? I'd really like to see it.
Well, when compiled with SM2.0, the PalTex shader seems to be every-so-
slightly faster on my GF7950GT than the SM1.4 version, so I guess it's a
minor win for cards that support it.
- Fixed: ST_Endoom() failed to free the bitmap it used.
- Added the DTA_ColorOverlay attribute to blend a color with the texture
being drawn. For software, this (currently) only works with black. For
hardware, it works with any color. The motiviation for this was so I could
rewrite the status bar calls that passed DIM_MAP to DTA_Translation to
draw darker icons into something that didn't require making a whole new
remap table.
- After having an "OMG! How could I have been so stupid?" moment, I have
removed the off-by-one check from D3DFB. I had thought the off-by-one error
was caused by rounding errors by the shader hardware. Not so. Rather, I
wasn't sampling what I thought I was sampling. A texture that uses palette
index 255 passes the value 1.0 to the shader. The shader needs to adjust the
range of its palette indexes, or it will end up trying to read color 256
from the palette texture when it should be reading color 255. Doh!
- The TranslationToTable() function has been added to map from translation
numbers used by actors to the tables those numbers represent. This function
performs validation for the input and returns NULL if the input value
is invalid.
- Major changes to the way translation tables work: No longer are they each a
256-byte array. Instead, the FRemapTable structure is used to represent each
one. It includes a remap array for the software renderer, a palette array
for a hardware renderer, and a native texture pointer for D3DFB. The
translationtables array itself is now an array of TArrays that point to the
real tables. The DTA_Translation attribute must also be passed a pointer
to a FRemapTable, not a byte array as previously.
- Modified DFrameBuffer::DrawRateStuff() so that it can do its thing properly
for D3DFB's 2D mode. Before, any fullscreen graphics (like help images)
covered it up.
SVN r640 (trunk)
- Added a new color parameter to DCanvas::Clear() that specifies the
ARGB value of the color. This is used if the old color parameter,
which specifies a palette entry, is -1.
SVN r617 (trunk)
if present.
- Modified GZDoom's true color texture copy functions and added them
to generate 32 bit D3D textures. Paletted TGAs and PCXs are also handled
this way but I don't think these 2 formats are worth some more special
handling.
(Question: Is it worth it to implement special handling for paletted PNGs
so that they are used as 8 bit textures internally?)
SVN r608 (trunk)
They are not actually drawn with it yet, nor is it complete, but it's
something to start with.
- Split up DCanvas::DrawTexture() into more pieces to make it easier to
virtualize.
- Removed support for non-32-bit palette textures from D3DFB. What kind of
card supports pixel shaders but not 32-bit textures?
SVN r605 (trunk)
- Updated project files for nasm 2.0, which is now named nasm.exe for the
Windows version, rather than nasmw.exe. Also fixed the annoying new warnings
it generated.
SVN r593 (trunk)
receives the input focus. When the pane is closed, the focus doesn't
return to any window, so even though the window is still active, it no
longer has the focus and does not receive input events.
- Fixed: The network synch timer was still left running after the game
started. (Windows only)
- Fixed: When a player leaves the game at the exact moment they are being
damaged, the game could crash because their actor still had a valid player
pointer, but the player's mo pointer had been NULLed.
SVN r588 (trunk)
installed. If so, it checks your SteamApps directory for any IWADs you may
have purchased through Steam and adds any it finds to the list of available
IWADs you can play. This means that if you bought your id games through
Steam, you can just extract ZDoom anywhere you like and run it without doing
any additional setup.
SVN r581 (trunk)
NetDone.
- moved the DIM_MAP define into v_palette.h so that it can be accessed
from outside the status bar code.
- Fixed: The check for non-swimmable water in UpdateWaterLevel checked for
SECF_UNDERWATER instead of SECF_UNDERWATERMASK.
SVN r514 (trunk)
- The net start pane is now given focus when it is created, so it can
receive keyboard input.
- Added playback of the "WeaponPickup" sound when a Hexen net game starts.
- Separated the different startup screens into classes for better
modularization (which I should have done in the first place). (Sorry,
have not done it for Linux yet, so that won't compile as-is.)
SVN r496 (trunk)
of scrunching the startup screen up to make room for it.
- Added the red net notches for Hexen's startup screen.
- Added hprintf and status simulation for Heretic's startup screen.
SVN r495 (trunk)
position when not playing in fullscreen mode.
- Changed the upper-left window positioning that was always used in debug
builds into a command line option (-0), so debug and release builds behave
the same.
SVN r482 (trunk)
.rtext files in the assembly object files. Now I can avoid doing this at
runtime, which means that ZDoom is now UPX-compatible if anyone wants to
pack it.
You will need to do a rebuild or manually delete the old assembly .obj files
for the first build from this revision to succeed, since there are no
changes to the assembly files themselves, and the build process will not be
able to automatically detect that they need to be rebuilt.
SVN r473 (trunk)
P_TranslateLinedefs.
- Fixed: ShowErrorPane can be called before ST_NetDone is valid so it has to
check whether it is NULL.
- Fixed: The Megasphere had an incorrect pickup sound.
- Fixed: The new video initialization code could set the screen's Font pointer
to NULL, causing a crash with levels that start in a secret sector.
SVN r464 (trunk)
Normally Direct3D sets the FPU to single precision. We don't want that,
since it can mean going out of sync with machines that are using the
standard precision. Additionally, the nodebuilder requires the extra
precision that single precision lacks.
SVN r455 (trunk)
MAPINFO keyword 'bordertexture' and are settable per map.
- Fixed: When used in DECORATE A_Explode must use A_ExplodeParms.
- Added custom label support to A_Chase. To enable resurrection from the
customizable version I also moved all A_VileChase stuff into p_enemy.cpp.
SVN r437 (trunk)
- Fixed: The screen wipe must be disabled for Heretic's underwater ending. If
not, the wipe will try to mix pictures with different palettes.
SVN r435 (trunk)
both named item.
- Switched ddraw.dll to be delay loaded. With D3D9 now being the default
display code, this avoids wasting time loading DDraw if it isn't needed.
- Fixed: The Win32 I_FatalError() did not set alreadyThrown, so it could get
stuck in an endless fatal error loop.
SVN r433 (trunk)
wadsrc/Makefile, nor did it use the makefile for cleaning.
- Added ST_NetMessage() for mixing miscellaneous messages with the network
startup meter, since they get mixed in the same space on the Linux terminal
and must be handled properly to avoid looking bad.
SVN r429 (trunk)
- Fixed: The host would let more than the desired number of players connect.
- Decreased the frequency of packets in ST_NetLoop() to two per second.
- Fixed: During the i_net handshaking, guests never verified that the messages
they received were from the host.
- Removed the -net command line option. I'm not sure it even worked anymore.
SVN r421 (trunk)
