This was originally invented to fix the sprite offsets for the hardware renderer.
Changed it so that it doesn't override the original offsets but acts as a second set.
A new CVAR has been added to allow controlling the behavior per renderer.
This allows using the UI scale or its own value, like all other scaling values.
In addition there is a choice between preserving equal pixel size or aspect ratio because the squashed non-corrected versions tend to look odd, but since proper scaling requires ununiform pixel sizes it is an option.
- changed how status bar sizes are being handled.
This has to recalculate all scaling and positioning factors, which can cause problems if the drawer leaves with some temporary values that do not reflect the status bar as a whole.
Changed it so that the status bar stores the base values and restores them after drawing is complete.
The idea is, when status bars are moved to ZScript that only this small wrapper class needs to be dealt with and the implementation can be left alone. SBARINFO is far too complex to be scriptified, but having it inherit directly from DBaseStatusBar and access its member variables severely limits the options of dealing with the status bar code. This way, it only accesses some globally visible functions in DBaseStatusBar and no variables.
- renamed the global ST_X and ST_Y variables because it is far too confusing and error-prone to have the same names inside and outside DBaseStatusBar.
The only reason this even existed was that ZDoom's original VC projects used __fastcall. The CMake generated project do not, they stick to __cdecl.
Since no performance gain can be seen by using __fastcall the best course of action is to just remove all traces of it from the source and forget that it ever existed.
- Added delay times of all players to the scoreboard
- Removed balancing from packet-server (tried it, didn't work)
- Calculations remove an extra tic to account for possible bias
- Added a segment of code that now makes the intermission wait for all
players before advancing, instead of continuing on any player. A "ready
icon" shows to reflect this.
- The Deathmatch intermisson couldn't show the ready icon (because it
just used the ingame scoreboard), so a proper intermission was added,
which reflects the same design as the coop scoreboard.
- The colour column wasted more space then it should have needed, so it
was replaced with player colour backgrounds.
- Slight y offset adjustments to make everything fit in 320x200
properly.
player bars on the scoreboard.
- Fixed: Having +showscores down during the intermission would draw both the regular intermission
scoreboard plus the HUD scoreboard.
- Fixed: hu_scores used the player icon's unscaled width when calculating sizes.
SVN r3815 (trunk)
look awful on widescreen intermissions. Also changed the column widths to
be font-dependant rather than fixed proportions of the screen width.
- Fixed horizontal positioning of 'finished' on the Raven games when scaled.
SVN r1303 (trunk)
called SMALLFNT.
- Reduced the width of the second column in wi_percents false mode from 3 to
2 characters.
- Added a WISLASH graphic for Doom's intermission screen when wi_percents is
false.
SVN r1298 (trunk)
- Changed WI_drawPercent() when wi_percents is false so that the total
display is optional, and it formats it like Heretic's intermission, with
a slash and a fixed-width right column.
- Font is no longer a property of the screen object. Pass the font to
DrawText and DrawChar directly instead.
- Doom's intermission characters are now collected together as a font
so they can be colorized.
SVN r1294 (trunk)
so that all files are included by a central one instead of compiling
each one separately. This speeds up the compilation process by 25%
when doing a complete rebuild in Visual C.
- Cleaned up more header dependencies.
SVN r1226 (trunk)
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
that animated icons can be done with it.
- Changed FImageCollection to use a TArray to hold its data.
- Fixed: SetChanHeadSettings did an assignment instead of comparing
the channel ID witg CHAN_CEILING.
- Changed sound sequence names for animated doors to FNames.
- Automatically fixed: DCeiling didn't properly serialize its texture id.
- Replaced integers as texture ID representation with a specific new type
to track down all potentially incorrect uses and remaining WORDs used
for texture IDs so that more than 32767 or 65535 textures can be defined.
SVN r1036 (trunk)
code left in that file.
- Cleaned up r_data.cpp.
- Fixed: FTextureManager::FindTexture should not print error messages if it
doesn't find the texture.
- Added Karate Chris's patch for fixing Strife quit messages.
SVN r718 (trunk)
- Added .txt files to the list of types (wad, zip, and pk3) that can be
loaded without listing them after -file.
- Fonts that are created by the ACS setfont command to wrap a texture now
support animated textures.
- FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn
with the hardware 2D path instead of being restricted to the game palette.
- Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1
on a Radeon 9000.
- Added back the off-by-one palette handling, but in a much more limited
scope than before. The skipped entry is assumed to always be at 248, and
it is assumed that all Shader Model 1.4 cards suffer from this. That's
because all SM1.4 cards are based on variants of the ATI R200 core, and the
RV250 in a Radeon 9000 craps up like this. I see no reason to assume that
other flavors of the R200 are any different. (Interesting note: With the
Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the
debug Direct3D 9 runtime, but it works perfectly fine with the retail
Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its
math inside pixel shaders. That would explain perfectly why I can't use
constants greater than 1 with PS1.4 and why it can't do an exact mapping to
every entry in the color palette.
- Fixed: The software shaded drawer did not work for 2D, because its selected
"color"map was replaced with the identitymap before being used.
- Fixed: I cannot use Printf to output messages before the framebuffer was
completely setup, meaning that Shader Model 1.4 cards could not change
resolution.
- I have decided to let remap palettes specify variable alpha values for
their colors. D3DFB no longer forces them to 255.
- Updated re2c to version 0.12.3.
- Fixed: A_Wander used threshold as a timer, when it should have used
reactiontime.
- Fixed: A_CustomRailgun would not fire at all for actors without a target
when the aim parameter was disabled.
- Made the warp command work in multiplayer, again courtesy of Karate Chris.
- Fixed: Trying to spawn a bot while not in a game made for a crashing time.
(Patch courtesy of Karate Chris.)
- Removed some floating point math from hu_scores.cpp that somebody's GCC
gave warnings for (not mine, though).
- Fixed: The SBarInfo drawbar command crashed if the sprite image was
unavailable.
- Fixed: FString::operator=(const char *) did not release its old buffer when
being assigned to the null string.
- The scanner no longer has an upper limit on the length of strings it
accepts, though short strings will be faster than long ones.
- Moved all the text scanning functions into a class. Mainly, this means that
multiple script scanner states can be stored without being forced to do so
recursively. I think I might be taking advantage of that in the near
future. Possibly. Maybe.
- Removed some potential buffer overflows from the decal parser.
- Applied Blzut3's SBARINFO update #9:
* Fixed: When using even length values in drawnumber it would cap to a 98
value instead of a 99 as intended.
* The SBarInfo parser can now accept negatives for coordinates. This
doesn't allow much right now, but later I plan to add better fullscreen
hud support in which the negatives will be more useful. This also cleans
up the source a bit since all calls for (x, y) coordinates are with the
function getCoordinates().
- Added support for stencilling actors.
- Added support for non-black colors specified with DTA_ColorOverlay to the
software renderer.
- Fixed: The inverse, gold, red, and green fixed colormaps each allocated
space for 32 different colormaps, even though each only used the first one.
- Added two new blending flags to make reverse subtract blending more useful:
STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that
gets blended with the background, since that seems like a good idea for
reverse subtraction. They also work with the other two blending operations.
- Added subtract and reverse subtract blending operations to the renderer.
Since the ERenderStyle enumeration was getting rather unwieldy, I converted
it into a new FRenderStyle structure that lets each parameter of the
blending equation be set separately. This simplified the set up for the
blend quite a bit, and it means a number of new combinations are available
by setting the parameters properly.
SVN r710 (trunk)
- moved the AM line drawer into DCanvas as a virtual function. While testing
this code I discovered that the antialias precalculation was never used
except for the very first frame of AM drawing. However, since I couldn't
detect even a marginal performance improvement using this code on 2 computers
I just disabled it completely because it severely complicates a more generic
implementation. I also disabled am_ovtrans in the process because I couldn't
see any positive effects of using this cvar. All it does is adding some
ugly distortion to the lines it affects without any apparent benefits.
* Added fix by Karate Chris containing:
- Added a 'No team changing' DMFlag2 which prevents players from changing teams
unless they are not on a team.
- Added a 'No respawn' DMFlag2 which prevents a player from respawning after
they have died.
- Added a 'Keep frags gained' DMFlag2 which allows you to choose whether you
want to reset the frags of each player next level or not.
- Added a small visual enhancement to the cooperative scoreboard to show
if a player has died.
- Fixed: If the 'teamplay' console variable was set to 'true' in a cooperative
game, the scoreboard would show team play related items as opposed to
cooperative items.
- Fixed: The 'bot_observer' console variable should not work in network games.
- Fixed: Bots made intermission skip really fast.
SVN r634 (trunk)
passing renderer specific data to the function. Also added DTA_Font so
that the renderer can fetch font translations from the proper font.
DIM_MAP/ConShade had to be made a regular translation table to make it
work.
- Added Karate Chris's fix for scoreboard displaying team play related data
in non teamplay games.
- Fixed: The team selection menu didn't work.
- Fixed: UpdateTeam passed an FString to Printf.
SVN r623 (trunk)
- Added a new color parameter to DCanvas::Clear() that specifies the
ARGB value of the color. This is used if the old color parameter,
which specifies a palette entry, is -1.
SVN r617 (trunk)
so now it is available in all games.
- Replaced the call to A_FlameSnd in the HereticPlayer's burn death sequence
with A_FireScream and defined *burndeath for Heretic.
- Added Grubber's custom player class support.
SVN r250 (trunk)
