This made reviewing the code for accessing the global state hard, because the doomdef.h contains mainly constants, this particular item was the only thing in there that represents actual engine state.
For some files that had the Doom Source license attached but saw heavy external contributions over the years I added a special note to license all original ZDoom code under BSD.
- all 5 settings affected by uiscale have been changed to have the exact same semantics: -1, if supported means special scaling, this is available for HUD and status bar, 0 means to use uiscale, any larger value is a direct scaling factor.
- scaling is cut off when the factor is larger than screenwidth/320 or screenheight/200 because anything larger will definitely not fit.
- a lot of code has been cleaned up and consolidated. Especially the message code had an incredible amount of redundancy.
- all scaling options have been moved into a submenu. This menu is not complete, though - it still requires a special menu widget to convey the intended information without confusing the user.
This allows using the UI scale or its own value, like all other scaling values.
In addition there is a choice between preserving equal pixel size or aspect ratio because the squashed non-corrected versions tend to look odd, but since proper scaling requires ununiform pixel sizes it is an option.
- changed how status bar sizes are being handled.
This has to recalculate all scaling and positioning factors, which can cause problems if the drawer leaves with some temporary values that do not reflect the status bar as a whole.
Changed it so that the status bar stores the base values and restores them after drawing is complete.
This one was particularly nasty because Windows also defines a DWORD, but in Windows it is an unsigned long, not an unsigned int so changing types caused type conflicts and not all could be removed.
Those referring to the Windows type have to be kept, fortunately they are mostly in the Win32 directory, with a handful of exceptions elsewhere.
The idea is, when status bars are moved to ZScript that only this small wrapper class needs to be dealt with and the implementation can be left alone. SBARINFO is far too complex to be scriptified, but having it inherit directly from DBaseStatusBar and access its member variables severely limits the options of dealing with the status bar code. This way, it only accesses some globally visible functions in DBaseStatusBar and no variables.
- renamed the global ST_X and ST_Y variables because it is far too confusing and error-prone to have the same names inside and outside DBaseStatusBar.
The 'unix' identifier isn't defined when '-std' is passed to the compiler (tested with gcc and clang), so use '__unix__' which is well enough documented.
player bars on the scoreboard.
- Fixed: Having +showscores down during the intermission would draw both the regular intermission
scoreboard plus the HUD scoreboard.
- Fixed: hu_scores used the player icon's unscaled width when calculating sizes.
SVN r3815 (trunk)
- Changed WI_drawPercent() when wi_percents is false so that the total
display is optional, and it formats it like Heretic's intermission, with
a slash and a fixed-width right column.
- Font is no longer a property of the screen object. Pass the font to
DrawText and DrawChar directly instead.
- Doom's intermission characters are now collected together as a font
so they can be colorized.
SVN r1294 (trunk)
so that all files are included by a central one instead of compiling
each one separately. This speeds up the compilation process by 25%
when doing a complete rebuild in Visual C.
- Cleaned up more header dependencies.
SVN r1226 (trunk)
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
- The stat meters now return an FString instead of sprintfing into a fixed
output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
- For consistancy with the other integral types, byte is no longer a
synonym for BYTE.
- Most uses of BOOL have been change to the standard C++ bool type. Those
that weren't were changed to INTBOOL to indicate they may contain values
other than 0 or 1 but are still used as a boolean.
- Compiler-provided types with explicit bit sizes are now used. In
particular, DWORD is no longer a long so it will work with both 64-bit
Windows and Linux.
- Since some files need to include Windows headers, uint32 is a synonym
for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
was all it contained.
SVN r326 (trunk)
