Visual mode: removed "Fit Texture's Width" and "Fit Texture's Height" actions.
Visual mode: "Auto-align texture offsets" actions were incorrectly aligning double-sided middle walls in some cases.
Visual mode: "Auto-align texture offsets" actions now align non-wrapped double-sided middle walls to vertical offset closest to their initial vertical offset.
Visual mode: middle parts of double-sided walls were ignored when Shift-selecting walls.
Nodebuilders/Game configurations: GL nodes definitions were missing from game configurations.
Nodebuilders/Game configurations: "~MAP" wildcard can now be a part of a lump name.
Nodebuilders: GL nodes were not properly handled by the editor.
Main Window: the window is now moved into the view when stored position is ouside of screen bounds.
Classic and Visual modes: changing thing pitch was ignored in some cases.
Visual mode: raising and lowering a thing with "+SPAWNCEILING" flag now works the same way as when raising/lowering a regular thing.
Visual mode: using "Raise/Lower Floor/Ceiling to adjacent sector" actions on a thing with "+SPAWNCEILING" flag now works the same way as when using them on a regular thing.
Rendering: even more fixes to MODELDEF and UDMF properties-related model rendering logic.
Internal, ResourceListEditor: rewritten resource validation check in a more OOP-ish way.
Configurations: fixed an infinite loop crash when a file was trying to include() itself.
UDMF thing flags: added Skill 6-8 to the flags list (because there are thing filters for these).
ZDoom_ACS.cfg: added definitions for SetTeleFog and SwapTeleFog.
ZDoom_DECORATE.cfg: added definitions for A_SetTeleFog and A_SwapTeleFog.
Updated ZDoom ACC.
Updated documentation.
Renamed "Toggle dynamic lights rendering" action to "Show dynamic lights".
Changed: "Show dynamic lights" action now toggles between available dynamic light rendering modes.
Renamed "Toggle models rendering" action to "Show models".
Changed: "Show models" action now toggles between available model rendering modes.
Removed "Toggle dynamic lights animation" and "Render selected/all models" actions.
Fixed, Randomize Sectors form: selection highlight was not updated after applying the changes when the form was shown in Sectors mode.
Consistency: selection is now cleared after applying changes done in Randomize Things and Randomize Vertices forms.
Fixed, Classic modes: sprites of things with attached models were not rendered when model rendering was disabled.
Updated documentation.
Visual mode: "Select" action with "with the same textures" modifier (Shift + LMB) now selects adjacent sidedefs only when their height intersects with the height of the current sidedef.
Visual mode: "Select" action with "with the same textures" modifier (Shift + LMB) was not selecting connected one-sided sidedefs when used on a sidedef without a texture.
Cosmetic: fixed a couple of action descriptions in BuilderModes' Actions.cfg.
Cosmetic: MainForm.UpdateToolStripSeparators was working incorrectly in some cases.
Cosmetic: ErrorChecksForm's title was not updated when no errors were found.
Map Analysis mode: export to file command will now show "Save File" dialog instead of putting the file in the same folder as the map, also added some boilerplate.
Tag Explorer plugin: save to file command will now show "Save File" dialog instead of putting the file in the same folder as the map, also added some boilerplate.
Internal: reformatted GZCrash.log a bit.
Sectors mode: changed Alt-key handling. Now it only enables "snap to grid increment" mode.
Things mode: "snap to grid increment" mode now works in this mode.
Updated documentation.
Moved "Rotate Clockwise" and "Rotate Counterclockwise" actions to "Edit" category.
Tag Statistics form: help label was incorrectly aligned.
Some actions in Sectors and Linedefs modes were not used on highlighted map elements.
Some actions in Sectors and Linedefs modes created undo groups incorrectly when used on highlighted map elements.
Moved settings for "Draw [stuff]" modes to the top toolbar.
Added hints for Draw Grid mode.
Fixed a status message update bug introduced in previous commit.
Draw Curve Mode: added settings panel.
Sectors mode: added "Make Door" button to the toolbar.
Swapped Side panel and Info panel z-order.
Interface: split toolbar into 3 separate toolbars. All toolbar buttons are now viewable at 1024x768.
Interface: grouped stuff in "Modes" menu a bit better.
Interface: added "Draw [stuff]" buttons to modes toolbar.
Interface: reorganized main menu. Hope it makes more sense now.
API: added General.Interface.AddModesButton() and General.Interface.AddModesMenu(), which can be used to add buttons to specific group in "Modes" toolbar and menu items to specific group in "Modes" menu, so actions, which behave like an editing mode, but are not part of one can be added there.
Numeric textbox: in addition to '++NN' and '--NN', you can use '*NN' and '/NN' to multiply or divide the values.
Configurations, ZDoom_linedefs.cfg: some linedef action arguments were missing a proper type.
Rewritten parts of hints system. Hints are now loaded from "Hints.cfg" file.
When Draw Rectangle or Draw Ellipse mode is enabled, it's settings are now shown in side panel.
Draw Ellipse mode: increased maximum number of sides to 512.
Changed the way tags are shown in Tag Selector controls. Tags without labels are now shown as a number (not "Tag N"), and tags with label are now shown as "N (label)", not "label (N)".
Tag labels are now shown in Thing, Sector and Linedef info panels.
Once again changed the way things are rendered while dragged.
Rearranged the label in PairedIntControl and PairedFieldControl (it is now behind numeric controls).
Optimized MapSet.GetSectorByCoordinates().
Error checks: added "Check unused textures" option.
Replaced MissingTexture3D and UnknownTexture3D.
Sectors mode: restored "Lower/Raise Floor/Ceiling by 8 mp" actions.
Visual mode: in some cases sidedefs were rendered as selected when they were not.
Existing linedefs were not split while drawing new lines in some cases.
Texture and height overrides were not applied correctly in some cases.
Preferences form: "Ctrl+Alt+ScrollUp" and "Ctrl+Alt+ScrollDown" dropdown items were setting the shortcut to "Ctrl+Shift+ScrollUp" and "Ctrl+Shift+ScrollDown".
Visual mode: added "Match Brightness" action.
DECORATE parser: actor names, which contain "+" and "-" symbols, are now parsed correctly.
Fixed an error in lump ranges creation logic.
Cosmetic fixes in various warning/error messages.
Updated documentation.
Visual mode: changed "Move Texture Left/Right/Up/Down by 8" actions to "Move Texture Left/Right/Up/Down by cur. grid size"
Visual mode: holding Ctrl-Shift while dragging texture with the mouse will snap texture offsets to current grid size.
Classic modes: interiors of highlighted sectors are now highlighted when the action target of currently highlighted map element is sector.
Unhandeled exceptions infos are now written to the event log.
Visual mode: added "Reset Local Texture Offsets (UDMF)" action (default key is Ctrl-Shift-R). It will reset upper/middle/lower texture offsets in UDMF and will act exactly as "Reset Texture Offsets" action in other map formats.
Sectors mode: effect and tag overlay can now be toggled separately from selection numbers.
Sectors mode: "View Tags and Effects" and "View Selection Numbering" settings are now saved to program configuration.
Sectors mode: removed "Lower Floor by 8 mp", "Raise Floor by 8 mp", "Lower Ceiling by 8 mp" and "Raise Ceiling by 8 mp" actions.
"Increase Brightness by 8" and "Decrease Brightness by 8" actions now work in Sectors mode.
Moved "Increase Brightness by 8" and "Decrease Brightness by 8" actions to "Edit" category.
"Toggle Highlight" action now works in Sectors mode.
Moved "Toggle Highlight" action to "Tools" category.
Removed Brightness mode.
Updated documentation.
"Snap Map Elements to Grid" mode now tries to fix invalid geometry after vertex snapping.
Vertices mode: in some cases not all vertices were removed when deleting vertices.
Removed "Load GZDoom light definitions" from preferences. If you want to use GZDoom's GLDEFS definitions, add "lights.pk3" as a resource.
Visual mode: fixed a crash when toggling GZDoom Geometry Effects (Tab)
Fixed sector bounding box calculation error.
Renamed "Edit -> Grid Setup..." to "Edit -> Grid and Backdrop Setup..."
Updated documentation
Increased maximum zoom level in Classic modes to 3000%.
Added "1 mp" option in grid size menu.
Added "400%" option in zoom menu.
Renamed "Toggle GZDoom rendering effects" action to "Toggle Geometry Effects".
Sync camera position: Visual Camera height is now changed only if camera is above or below current sector.
Classic modes: view was not redrawn after "Test map from current position" action.
"Test map from current position" action: incorrect player start was used when a map had several Player 1 Start things.
Script editor: pressing "F1" now opens keyword help instead of program manual.
Linedef edit form, Thing edit form: rewritten script support logic. It should now work in the same manner as the rest of controls.
Thing info panel: thing arguments now have proper labels.
Edit forms, UDMF: fields, which are handled by UI, are no longer shown in "Custom" tab.
Visual mode: fixed a crash when loading a model on a video card without Shader model 2.0 support.
Fixed incorrect argument number and changed most of labels in "Cameras and interpolation" section of zdoom_things.cfg.
Visual mode, UDMF: renamed "Rotate Thing Clockwise" and "Rotate Thing Counterclockwise" actions to "Rotate Clockwise" and "Rotate Counterclockwise". These actions can now be used to change rotation of floor/ceiling textures.
Visual mode, UDMF: "Reset Texture Offsets" action now also resets sidedef's scale and floor/ceiling's scale and rotation.
Visual mode, UDMF: control line's OffsetX and OffsetY were not taken into account when calculating texture offsets of 3d floors' sides.
Visual mode, UDMF: fixed a ton of bugs in Auto align functions.
Visual mode, UDMF: when using "Move Texture Left/Right/Up/Down by 1" actions texture offsets were not updated properly when texture's scale was < 1.0.
Visual mode, UDMF: OffsetX and OffsetY were not taken into account in "Fit Texture Width/Height" actions.
Dockers Panel: added Pin/Unpin button, which acts the same as "Preferences -> Interface -> Side panels -> Auto hide" checkbox.
Texture size labels can now be disabled by unchecking "Preferences -> Interface -> Show texture and flat sizes in browsers" checkbox.
Texture size labels now are not shown for unknown textures.
Most of texture size labels had incorrect bg color.
ZDoom_linedefs.cfg: action specials 223 and 224 had incorrect Arg0.
Visual Mode, UDMF, Visual Vertices: you can now press "Delete" key to clear z-offsets of selected vertices.
Visual Mode, UDMF, Visual Vertices: the logic, which decides whether z-offset should be kept or removed, was not working properly.
Visual Mode, UDMF: Auto-align Textures (Y) action was not working properly when targeted texture was lower wall without "Lower Unpegged" flag.
Visual Mode, UDMF: "Auto Align Textures" actions now work on slopes.
Visual Mode, UDMF: Floor/ceiling texture rotation is now taken into account when moving texture offsets with arrow keys.
Visual Mode, UDMF: Fixed a bug in floor/ceiling texture dragging by mouse.
Point Thing at Cursor action: action now works when used from menu, changed default shortcut to Shift-L. You can now hold Ctrl to point Things away from cursor.
Things can now be rotated in visual mode.
Added JPG and TGA image format support.
Fixed: TEXTURES files with names other than "textures.ext" will now be loaded (as an example, files named like "textures.something.txt" or "textures_walls.ccp" will be loaded by (G)ZDoom, but not by Doom Builder 2 or previous versions of GZDB).
Fixed: textures defined in TEXTURES have higher priority in (G)ZDoom than images with the same name in "textures" folder.
Fixed another possible crash when MODELDEF is reloaded.
Added drawing modes to Mode menu, so they are much easier to spot now.
Warnings notify panel blinks much more noticeable when there are warnings.
UDMF Controls plugin:
3D-floor surfaces can be edited now.
Relative mode is now enabled by default.
Scale control now works properly in relative mode.
Angle control's angle indicator in now drawn properly when value is changed using numeric control.
