This takes care of the type punning issue by each pass using the correct
sampler type with the correct view types bound. Also, point light and
spot light shadow maps are now guaranteed to be separated (it was just
luck that they were before) and spot light maps may be significantly
smaller as their cone angle is taken into account. Lighting is quite
borked, but at least the engine is running again.
The grid calculations are modified from those of Inigo Quilez
(https://iquilezles.org/articles/filterableprocedurals/), but give very
nice results: when thin enough, the lines fade out nicely instead of
producing crazy moire patterns. Though currently disabled, the default
planes are the xy, yz and zx planes with colored axes.
The lights debug is from the light splat experiment (this is why I kept
the code), and the bsp debug is based on that. Both currently disabled
for now until I get UI controls in.
It looks horrible due to the lack of lighting etc, but it's good enough
for basic testing, especially of my render job design (that passed with
flying colors).
I'm not sure I like fontconfig (docs are...), but it is pretty standard,
and I was able to find some reasonable examples on stackexchange
(https://stackoverflow.com/questions/10542832/how-to-use-fontconfig-to-get-font-list-c-c).
Currently, only the one font is handled, no font sets for fall backs
etc. It's meant for the debug UI I'm working on, so that shouldn't be a
big deal.
Move things around a bit so I can restore the previous behavior of doing
all lights in a single full screen pass but keep the code improvements
from trying to do splatted lighting.
Samplers have no direct relation to render passes or pipelines, so
should not necessarily be in the same config file. This makes all the
old config files obsolete, and quite a bit of support code in vkparse.c.
Gotta be sure :)
With the new system mostly up and running (just bsp rendering and
descriptor sets/layout handling to go, and they're independent of the
old render pass system), the old system can finally be cleared out.
The creation of the render jobs doesn't really belong with the running
of those jobs. This makes the code a little easier to navigate as it was
too easy to lost between load-time and run-time code.
There's still a lot of work to do, but the basics are in. The spec will
be parsed into info structs that can then be further processed to
generate all the actual structs, generally making things a little less
timing dependent (eg, image view info refers to its image by name).
The new render pass and subpass structs have their names mangled for now
until I can switch over to the new system.
There are some missing parts from this commit as these are the fairly
clean changes. Missing is building a separate set of pipelines for the
new render pass (might be able to get away from that), OIT heads texture
is flat rather than an array, view matrices aren't set up, and the
fisheye renderer isn't hooked up to the output pass (code exists but is
messy). However, with the missing parts included, testing shows things
mostly working: the cube map is rendered correctly even though it's not
displayed correctly (incorrect view). This has definitely proven to be a
good test for Vulkan's multiview feature (very nice).
It turns out the slice pipeline is compatible with the glyph pipeline in
that its vertex attribute data is a superset (just the addition of the
offset attributes). While the queues have yet to be merged, this will
eventually get glyphs, sliced sprites, and general (static) quads into
the one pipeline. Although this is slightly slower for glyph rendering
(due to the need to pass an extra 8 bytes per glyph), this should be
faster for quad rendering (when done) as it will be 24 bytes per quad
instead of 32 bytes per vertex (ie, 128 bytes per quad), but this does
serve as a proof of concept for doing quads, glyphs and sprites in the
one pipeline.
The main reason I had created in the first place was I hadn't thought of
using image view swizzles to handle coverage-alpha textures (for
monochrome glyphs), and for whatever reason also had the texture in a
different binding slot to the twod fragment shader. With both issues out
of the way, there's no reason to have an almost identical (just some
naming) shader just for glyphs.
And add a function to process a passage into a set of views with glyphs.
The views can be flowed: they have flow gravity and their sizes set to
contain all the glyphs within each view (nominally, words). Nothing is
tested yet, and font rendering is currently broken completely.
Font and text handling is very much part of user interface and at least
partially independent of rendering, but does fit it better with GUI than
genera UI (ie, both graphics and text mode), thus libQFgui as well as
libQFui are built in the ui directory.
The existing font related builtins have been moved into the ruamoko
client library.
I had debated putting the blending in the compose subpass or a separate
pass but went with the separate pass originally, but it turns out that
removing the separate pass gains 1-3% (5-15/545 fps in a timedemo of
demo1).
It's a bit flaky for particles, especially at higher frame rates, but
that's due to supporting only 64 overlapping pixels. A reasonable
solution is probably switching to a priority heap for the "sort" and
upping the limit.
Although it works as intended (tested via hacking), it's not hooked up
as the current frame buffer handling in r_screen is not readily
compatible with how vulkan output is handled. This will need some
thought to get working.
When working, this will handle the output to the swap-chain images and
any final post-processing effects (gamma correction, screen scaling,
etc). However, currently the screen is just black because the image
for getting the main render pass output isn't hooked up yet.
While the HUD and status bar don't cut out a lot of screen (normally),
they might start to make a difference when I get transparency working
properly. The main thing is this is a step towards pulling the 2d
rendering into another render pass so the main deferred pass is
world-only.
There's no API yet as I need to look into the handling of qpic_t before
I can get any of this into the other renderers (or even vulkan, for that
matter).
However, the current design for slice rendering is based on glyphs (ie,
using instances and vertex pulling), with 3 strips of 3 quads, 16 verts,
and 26 indices (2 reset). Hacky testing seems to work, but real tests
need the API.
It turns out my approach to alias skin coloring just doesn't work for
the quake data due to the color curves not having a linear relationship,
especially the bottom colors.
Line rendering now has its own pipeline (removing the texture issue).
Glyph rendering (for fonts) has been reworked to use instanced quad
rendering, with the geometry (position and texture coords) in a static
buffer (uniform texture buffer), and each instance has a glyph index,
color, and 2d base position.
Multiple fonts can be loaded, but aren't used yet: still just the one
(work needs to be done on the queues to support multiple
textures/fonts).
Quads haven't changed much, but buffer creation and destruction has been
cleaned up to use the resource functions.
With the addition of dependencies on freetype and harfbuzz, it became
clear that the renderer plugins need to be explicitly linked against
external dependencies (and that I need to do more installed testing,
rather than just my static local builds). This fixes the unresolved
symbols when attempting to load any of the plugins.
The real reason for the delay in implementing support for pNext is I
didn't know how to approach it at the time, but with the experience I've
gained using and modifying vkparse, the solution turned out to be fairly
simple. This allows for the use of various extensions (eg, multiview,
which was used for testing, though none of the hookup is in this
commit). No checking is done on the struct type being valid other than
it must be of a chainable type (ie, have its own pNext).
This is intended for the built-in 8x8 bitmap characters and quake's
"conchars", but could potentially be used for any simple (non-composed
characters) mono-spaced font. Currently, the buffers can be created,
destroyed, cleared, scrolled vertically in either direction, and
rendered to the screen in a single blast.
One of the reasons for creating the buffer is to make it so scaling can
be supported in the sw renderer.
This means that QF should support more exotic fonts without any issue
(once the rest of the text handling system is up to snuff) as HarfBuzz
does all the hard work of handling OpenType, Graphite, etc text shaping,
including kerning (when enabled).
Also, font loading now loads all the glyphs into the atlas (preload is
gone).
It is currently an ugly hack for dealing with the separate quad queue,
and the pipeline handling code needs a lot of cleanup, but it works
quite well, though I do plan on moving to HarfBuzz for text shaping. One
nice development is I got updating of descriptor sets working (just need
to ensure the set is no longer in use by the command queue, which the
multiple frames in flight makes easy).
