splitscreen controls now on the menu.
Fixed splitscreen panorama.
Pause automatically when at the console/menus.
Attempting to clean up replacement texture paths (internal textures are still an issue).
Fixed a crash when playing oversized demos.
gl_bloom/ffov should now work again without bugging out.
H2 Demoness's staff should no longer generate errors when shooting with the tome of power. Some other related changes.
Server should compile now.
git-svn-id: https://svn.code.sf.net/p/fteqw/code/branches/wip@3585 fc73d0e0-1445-4013-8a0c-d673dee63da5
Removed the impulse2/+forward2 etc commands.
Added +p2, -p2, p2 commands as a prefixed command instead. don't use + or - on them (so '+p2 forward' to move player 2 forward), this permits a simple generic way to send commands to a single player from an input device.
rawinput mice will submit commands/movements based upon idx%maxsplits, they will correctly submit mouse clicks, which will be mapped through the +p2/+p3 commands as appropriate, so each mouse is purely for a single player.
Fixed player model visibility in splitscreen mode.
Ignoring allow_splitscreen for the local player, cl_splitscreen is technically now the only enabler (though you will need to configure rawinput or binds).
Added support for { texturename prefixes.
git-svn-id: https://svn.code.sf.net/p/fteqw/code/branches/wip@3582 fc73d0e0-1445-4013-8a0c-d673dee63da5
Multiple consoles can now be printed/cleared via extra con commands.
Fixed the tab-completion alignment, by adding support for \t characters.
Changing the download mechanisms. Don't try downloading an ftp:// file. It'll probably crash you for now.
Trying to fix load time issues on q3bsps with a lot of curves.
Fixed sprites.
Added warning prints/spam where the new backend is bypassed, thus marking things that still need to be fixed.
QTV proxy fixed to not sit on qw servers unless someone is actually watching. Will ping for status requests still.
QTV proxy now supports ipv6.
QTV proxy now attempts to use the fte browser plugin.
Reworked the browser plugin code, now uses threads instead of ugly hacks. This should make cooperation with other such plugins work. Fixes unresponsiveness of opera, and gives an API that can be used from any other bit of software you want, tbh (read: internet explorer/activex plugins).
git-svn-id: https://svn.code.sf.net/p/fteqw/code/branches/wip@3516 fc73d0e0-1445-4013-8a0c-d673dee63da5
In this version: replacement GL backend. Replacement D3D backend sharing code with GL. Lots of code reorganisation.
git-svn-id: https://svn.code.sf.net/p/fteqw/code/branches/wip@3401 fc73d0e0-1445-4013-8a0c-d673dee63da5
Rewrote much of the console code. Should be no obvious differences.
Nearly all conchar parsing goes via a single function. Still some left in the dedicated server code.
Added the ability to parse utf-8 text, disabled by default.
Added the ability to input unicode chars using whatever keymap the user has set up in windows (not enabled by default).
Reworked vbo stuff to be a little more versatile.
Added toggle console command.
Added freetype2 support (not compiled by default).
git-svn-id: https://svn.code.sf.net/p/fteqw/code/trunk@3234 fc73d0e0-1445-4013-8a0c-d673dee63da5
Added com_parseutf8.
Z_EXT_VWEAP is supposedly supported serverside, but not clientside. It is not advertised, and not used, yet.
Fixed csqc mouse issues in linux, supposedly.
git-svn-id: https://svn.code.sf.net/p/fteqw/code/trunk@3226 fc73d0e0-1445-4013-8a0c-d673dee63da5
Fixed up cl_indepphysics. Sending is fully independent, bar sync points.
Fixed so #if 0 works in qc code.
Fixed up error conditions in qclib when features are not supported.
The webpage generator will now refcount properly.
Fixed error conditions when using glsl shaders.
If MULTITHREAD is defined, r_loadlit will not light inside a separate thread.
We now generate VBOs for bsp objects. Shaders/rtlights don't use them yet.
Fixed up MVD/multiview playback a bit. It now looks like it works! (cl_hightrack will no longer track the same person in all views).
Fixed error conditions when attempting to download versioned csprogs.
Reduced the number of places that a q3-style marked up string is expanded. I think there are a couple places left still though. Approximated ezquake colour codes.
Memory mapped read file access in win32, where we can. Not sure about this. Lets see how things pan out.
git-svn-id: https://svn.code.sf.net/p/fteqw/code/trunk@3195 fc73d0e0-1445-4013-8a0c-d673dee63da5
Multiple download sources can be specified (eg for mod+map). Takes the form "providedfile:urltodownload providedfile:urltodownload". This comes via the browser so relative urls = woot. The old single-url-only path is no longer supported. This is an incompatible change, but we're still young. The unpacking process is still the same, and still only paks/pk3s are extracted. Note that the providedfile is relative to the base dir rather than the game dir. You can specify potential alternate gamedirs.
The QTV file is not mandatory, you can use map="blah" join="blah" stream="0@blah", so long as you set the mime type as: type="application/x-fteplugin". src="someqtvfile" still works, of course (and doesn't mandate the type= field, although that should probably be specified to make life easier on configuring servers to use the correct mime types).
The splash image can be set with: splash="myurlhere". Note that only jpg and png files are supported. This comes via the browser so relative urls = woot.
Game property can take multiple game dirs now, too. First argument is the basic game. If its one of the special ones then FTE is meant to hunt down your prior install for that. If its not recognised then its added as the only game directory. Additional ones are added after (eg: "id1 fortress" adds just id1+fortress while "q1 fortress" adds id1+qw+fte+fortress). Use appropriately.
git-svn-id: https://svn.code.sf.net/p/fteqw/code/trunk@3160 fc73d0e0-1445-4013-8a0c-d673dee63da5
error (I hope it's the proper fix, Spike please check if I did the
right thing):
./client/cl_main.c: In function "Host_Init"
./client/cl_main.c:3708: error: "sv" undeclared (first use in this
function)
./client/cl_main.c:3708: error: (Each undeclared identifier is reported
only once
git-svn-id: https://svn.code.sf.net/p/fteqw/code/trunk@3158 fc73d0e0-1445-4013-8a0c-d673dee63da5
Added vid_wndalpha to make the window transparent (only supported in GL-win32).
Multiple issues with SW rendering, which I'll fix eventually. It does at least run, even if it looks ugly.
Plugins are now able to read the console input. Bigfoot, feel free to tweek.
Fixed up a few mismatched prototypes.
git-svn-id: https://svn.code.sf.net/p/fteqw/code/trunk@3153 fc73d0e0-1445-4013-8a0c-d673dee63da5
A few changes. Half-Life support is finally getting committed.
Some unnecessary filesystem code changes.
And there's code for nsapi - meaning we can embed FTE in a browser (firefox and opera on windows work).
A couple of CSQC changes, trying to move towards a final EXT_CSQC_1.
Revised ruleset format finally implemented.
Doesn't compile with msvc6 due to issues with libjpeg not being a clean library.
Presumably its fine in vs2005.
Your mileage may vary.
git-svn-id: https://svn.code.sf.net/p/fteqw/code/trunk@3148 fc73d0e0-1445-4013-8a0c-d673dee63da5
fte particle scripts are disabled (classic works).
I'll fix these in the new year.
Redid framestate stuff again. Slightly better now, but this is the bulk of the changes here.
Reworked the renderqueue to provide batches of items instead of individual items. This cleans up the particle rendering code significantly, and is a step towards multiple concurrent particle systems. fte's scripted particles are broken as I'm trying to find a way to rework them to batch types together, rather than having to restart each batch after each particle when you have two particles in a trail. I'll fix it some time.
Reworked some alias model code regarding skeletal models. Added some conceptual skeletal bone control builtins available to csqc. Currently it can query the bone names and save off animation states, but can't animate - its just not complete.
Added more info to glsl custom shaders.
Updated surface sorting on halflife maps to properly cope with alphaed entities, rather than just texture-based blends (q2-style).
git-svn-id: https://svn.code.sf.net/p/fteqw/code/trunk@3095 fc73d0e0-1445-4013-8a0c-d673dee63da5
Q3 clients can connect to q1 gamecode (sv_listen_q3).
hacked support for SendFlags. It'll work compatibly, just not efficiently.
Unified shared qc builtins.
fteqcc supports int |= float, more params in macros, &~= operator.
Additional recent DP QC extensions.
Particle system abstraction. 'r_particlesystem classic' (vs null or script) will revert to truly classic particles.
Nexuiz might run again.
Network address revamp (sv_port and sv_port_ipv6 can both be used to specify an ipv4 address:port and both corrently accept clients). localhost now properly favours ipv4 (use ::1 for ipv6 localhost).
Download system revamp.
Numerous other changes.
git-svn-id: https://svn.code.sf.net/p/fteqw/code/trunk@3051 fc73d0e0-1445-4013-8a0c-d673dee63da5
