(I.e. also restore r2232 again.)
The first one is the palette restore logic in G_DisplayRest, the second
is CON setgamepalette, to which the "don't gltexinvalidateall()" bit is
added to mimic the first. Hightile invalidations aren't really useful for
anything other than reloading them after a video mode change, IMO.
These changes mean that
1) active full screen tints should (almost) always be kept with a basepal
change. The only exceptions to this are when tints really have to be
cleared, e.g. when changing the player view in co-op play.
2) there should be no performance issues with simultaneously changing
basepals while a tint is applied
git-svn-id: https://svn.eduke32.com/eduke32@2637 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, we checked whether the faded palette has changed (by way of CRC)
and invalidated the textures then unless the preserve flags were set. This
however could lead to wrongly invalidating them under unfortunate circumstances,
e.g. basepal change from CON + tints at the same time before r2620 which
reverted r2232.
Now, only invalidate them if the corresponding preserve flags are clear AND
* the base palette has really changed OR
* the palette CRC changed and we were running on software gamma
The latter means that performance-killing invalidations may still happen on
GL platforms lacking HW gamma (for ATI, it's currently only disabled in 8-bit
fullscreen).
Also have a new global 'basepalreset' to fake a basepal change for
setbrightness(), currently used when changing renderers so that going from
Polymer to Polymost and back again will invalidate the Polymer textures
on the second change, potentially re-applying a basepal highpal. (Still
with me?)
git-svn-id: https://svn.eduke32.com/eduke32@2636 1a8010ca-5511-0410-912e-c29ae57300e0
The sliders themselves still permit changing values, but are drawn with a
'disabled' shade because they're non-functional with software gamma.
git-svn-id: https://svn.eduke32.com/eduke32@2635 1a8010ca-5511-0410-912e-c29ae57300e0
This was fixed with the preceding change; software mode will now always use
software gamma if an ATI/AMD card is detected.
git-svn-id: https://svn.eduke32.com/eduke32@2634 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, I knew no way of querying for graphics adapter vendors/names from
anything other than OpenGL. Googling revealed a way to do this with the
Windows API.
git-svn-id: https://svn.eduke32.com/eduke32@2633 1a8010ca-5511-0410-912e-c29ae57300e0
- in actors.c, make a static array const (the original patch removed the
staticness)
- remove one comment and change some compiled-out code
- remove commented out pre-Makefile.common stuff
Some changes were not adopted from tueidj's patch:
- whitespace cleanup
- ud.config.UseJoystick = 1 in config.c
- Makefile.common, as mentioned before
- proper read-in of g_numRealPalettes, because it was done with r2503
git-svn-id: https://svn.eduke32.com/eduke32@2632 1a8010ca-5511-0410-912e-c29ae57300e0
- BIGX -> BIGX_, likely again because of a name clash
- make a loop in animlib.c iterate in forward direction
git-svn-id: https://svn.eduke32.com/eduke32@2631 1a8010ca-5511-0410-912e-c29ae57300e0
This part is a mixture of the original patch and my changes. It seems like
tueidj had some trouble
1) getting OGG to work, which is why it's conditionally compiled out
2) struggling with endianness with the mixing routines? This may be also
due to him missing to define two others BIGENDIAN macros (our code is
in need of cleanup there). Note the change in jaudiolib/src/mix.c!
Because I added my share to this part, I might have actually broken sound
mixing on big-endian platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2630 1a8010ca-5511-0410-912e-c29ae57300e0
On the Wii, V7 (i.e. original) map limits are used and the maximum screen size
is 1600x1200.
git-svn-id: https://svn.eduke32.com/eduke32@2629 1a8010ca-5511-0410-912e-c29ae57300e0
- conditionally compiles out some code intended for the PC platforms
- compat.c: get home directory routine, access() implementation
- game.c: don't use ioctl(), lower cache1d size to 8 MiB, Wii-specific
initialization code and application directory ("apps/eduke32")
git-svn-id: https://svn.eduke32.com/eduke32@2628 1a8010ca-5511-0410-912e-c29ae57300e0
This simply macro-defines various low-level networking functions.
git-svn-id: https://svn.eduke32.com/eduke32@2627 1a8010ca-5511-0410-912e-c29ae57300e0
For the Wii, SDL's mutex functionality is used. The implementation in the
original patch was wrong though, so this part required non-trivial changes.
git-svn-id: https://svn.eduke32.com/eduke32@2626 1a8010ca-5511-0410-912e-c29ae57300e0
- the crosshair is displayed at the position read from the absolute pointing
device
- in the menus, use the hat input (that was mapped to mouse buttons in part 4)
for navigation
git-svn-id: https://svn.eduke32.com/eduke32@2625 1a8010ca-5511-0410-912e-c29ae57300e0
- sdlayer.c: custom "get joystick button names" routine
- jmact/mouse.c: packs some joystick events into the value returned by
MOUSE_GetButtons(): bits used are 256, 512, 4096, 8192
- MOUSE_Init() --> Mouse_Init(), presumably because of a name clash?
- comments out right-shift of joystick analog values by 5, maybe this fixes
the scale problems with the joystick on the PC too?
git-svn-id: https://svn.eduke32.com/eduke32@2624 1a8010ca-5511-0410-912e-c29ae57300e0
I didn't add Makefile.common, because it needs to be made conditional.
git-svn-id: https://svn.eduke32.com/eduke32@2622 1a8010ca-5511-0410-912e-c29ae57300e0
The original patch was communicated to me by Hendricks, but since it didn't
apply cleanly (it's based on r2182) I took the liberty of slightly messing
with it for inclusion into EDuke32.
Info: http://wiibrew.org/wiki/User:Tueidj/Duke3D
This first part (which wasn't changed from the original patch) implements
scaling arithmetic and miscellaneous pragmas, some in PPC assembly and a part
of them in C. Of some interest is the fact that the Wii processor apparently
lacks support for 64-bit integers, so divscale() uses floating-point math.
git-svn-id: https://svn.eduke32.com/eduke32@2621 1a8010ca-5511-0410-912e-c29ae57300e0
Because gltexinvalidate*() could be called too often when setgamepalette is used
while having a tint overlaid else. Pending thorough analysis/reworking of the
32-bit mode base palette handling / texture invalidation.
git-svn-id: https://svn.eduke32.com/eduke32@2620 1a8010ca-5511-0410-912e-c29ae57300e0
That is, have a second loop over all models run for each deleted tex and
null the texname. This is ugly, sure, but it's better than calling
glDeleteTextures on stale names.
git-svn-id: https://svn.eduke32.com/eduke32@2619 1a8010ca-5511-0410-912e-c29ae57300e0
- bump lpeg stack limit to 1024 (hack) for long if/if/if...else chains
- lexical: newline, EOF and whitespace; "bad" identifiers; hex literals,
newline terminated strings (allow empty string)
- syntax: allow nesting of array expressions, it's easier than special-casing;
handle issues with structs expecting parm2 (hackish); userdef;
switch/case/default
- fix parsing some commands; mind prefixes!
- frontend: if failing match, print last keyword and its position; warn on
"bad" identifiers (one per such); batch processing from command line
- Files that locate finds from my linux box now pass (except where there are
really syntax errors).
git-svn-id: https://svn.eduke32.com/eduke32@2616 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, it was in the "determine searchwall when aiming at floor or
ceiling" part. Now, if prsectors[]->ceil.plane (or ->floor.plane) is NULL,
we set the searchwall to the sector's firstwall and return.
git-svn-id: https://svn.eduke32.com/eduke32@2610 1a8010ca-5511-0410-912e-c29ae57300e0
- 4 instances -> HandleSE31
- 4 instances -> MaybeTrainKillPlayer
- 2 instances -> MaybeTrainKillEnemies
- move a couple of variables into inner blocks and add 'const' for easier reading
In passing, fix a minor glitch where the squishing sound of an enemy that got
run over by an SE 6 or 14 car would appear to originate from the SE instead
of the enemy's last position.
git-svn-id: https://svn.eduke32.com/eduke32@2607 1a8010ca-5511-0410-912e-c29ae57300e0
Of course, it's just for the heck of it, since this setting is not saved into
MAP files. I kinda like the cylindrical projection...
git-svn-id: https://svn.eduke32.com/eduke32@2605 1a8010ca-5511-0410-912e-c29ae57300e0
This has been there since searchbottomwall introduction in r1466.
git-svn-id: https://svn.eduke32.com/eduke32@2604 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, we only set the viewingrange according to the physical screen's
dimensions, but didn't correct yxaspect for a potential non-square pixel
ratio.
git-svn-id: https://svn.eduke32.com/eduke32@2603 1a8010ca-5511-0410-912e-c29ae57300e0
Consequently, it's not saved as a setting in either the game or editor
config files. We do this by calling "GetSystemMetrics(SM_CXSCREEN)"
(accordingly for y) and calculating the cvar by dividing common factors,
since it has to be in the form WWHH. This may fail for _really_ strange
screen dimensions, so a log message is printed at the very beginning.
git-svn-id: https://svn.eduke32.com/eduke32@2601 1a8010ca-5511-0410-912e-c29ae57300e0
Because this doesn't even seem to work on XP, we're being spammed with
DDERR_SURFACELOST messages...
git-svn-id: https://svn.eduke32.com/eduke32@2600 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, it was possible to leave a sector with less than three walls if
a point got deleted transitively by a TROR link. Now, a proper check is done
for all deletion candidates and a message stating which wall and sector is
problematic is printed. Thanks for Diaz for pointing out the brokenness.
git-svn-id: https://svn.eduke32.com/eduke32@2599 1a8010ca-5511-0410-912e-c29ae57300e0
Currently syntax only. Parses the original scandcode 0x1d files, which is
harder than you'd imagine given the relatively simple structure. Chokes on
new-gen custom stuff.
git-svn-id: https://svn.eduke32.com/eduke32@2594 1a8010ca-5511-0410-912e-c29ae57300e0
If one next instruction happened to be interpreted, madness would ensue,
because the pointer wouldn't be aligned on the "opcode" part anymore.
Also, with "seti", set current sprite index only after a successful validation.
git-svn-id: https://svn.eduke32.com/eduke32@2591 1a8010ca-5511-0410-912e-c29ae57300e0
This get into the writable variable the "linking type" of the sprite with index
<spritenum>. The result is a bit field of ORed values:
1: lotag has linking semantics
2: hitag
4: extra, 8: xvel, 16: yvel, 32: zvel, 64: owner (custom only)
Custom setting about which sprites have what kind of linking can be programmed
via EVENT_LINKTAGS: it receives a sprite index as the 'current sprite' and is
supposed to return the bit field in RETURN.
An example which lists sprites and their linking hi- and lotags is provided in
the state 'listusedtags' in a.m32.
git-svn-id: https://svn.eduke32.com/eduke32@2590 1a8010ca-5511-0410-912e-c29ae57300e0
