-lots of stylistic rewrites
-further improvements to anti-fighting code for wall and floor sprites (introduces three new cvars, r_wspr_offset, r_wspr_offset_variance, and r_fspr_offset)
-fixed brief HOM when traversing through a one-way masked wall
-seldomly used "alphahack" feature for hightile textures now represents alpha cutoff internally as a single byte instead of a float
-fixes a handful of issues where geometry failed to draw at certain coordinates from certain angles in certain resolutions
-renames a couple of cvars
git-svn-id: https://svn.eduke32.com/eduke32@5075 1a8010ca-5511-0410-912e-c29ae57300e0
The latter means that running perpendicular thin sector is handled better
if there are e.g. TROR sectors in the same x/y space.
git-svn-id: https://svn.eduke32.com/eduke32@5024 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes engine-side sprite animation in the following scenario: CON code
wants to draw a scene from EVENT_DISPLAYREST, but since it covers the whole
screen, disables the drawing of the 3D scene beforehand (RETURN set to 1 from
EVENT_DISPLAYROOMS). DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@5020 1a8010ca-5511-0410-912e-c29ae57300e0
- In drawvox(), make view-relative x and y high-precision on desktops. To a
large extent (but not completely), this fixes "stray" fake floor shadow
sprites for voxels.
- In the mouse picking code for voxels, fix a possible integer overflow.
A new engine.c-private function mulscale_triple30() is added.
DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@5017 1a8010ca-5511-0410-912e-c29ae57300e0
Also, in premap.c:G_CacheMapData(), comment out what was supposedly
intended as a debugging message ("percentage ...").
git-svn-id: https://svn.eduke32.com/eduke32@5009 1a8010ca-5511-0410-912e-c29ae57300e0
cutscene "somefile.anm" { delay 10 } // defines somefile.anm with a delay of 10 120Hz tics between frames. a more typical framerate method may come later, but this is how the originals worked.
Once defined, they can be played through CON with the new playback command, also called "cutscene". It works like this:
definequote 12345 somefile.anm
define ANIM_SOMEFILE 12345
...
cutscene ANIM_SOMEFILE // halts game execution and immediately plays cutscene, resuming execution when finished
...
Sounds can be played during animations (and tiles can be overlaid, etc) like this:
onevent EVENT_CUTSCENE
ifcutscene ANIM_SOMEFILE
{
ifvare RETURN 12 // frame 12
sound FLY_BY
rotatesprite ...
}
endevent
The value of the RETURN var at the end of EVENT_CUTSCENE determines the next frame to play. This can be used for looping, etc. Attempting to play animations backwards outright is not advised as animations only seek in one direction (so rewinding requires running it through from frame 0 again). This is will WIP and hasn't been heavily tested at all, so please try it out.
git-svn-id: https://svn.eduke32.com/eduke32@4987 1a8010ca-5511-0410-912e-c29ae57300e0
And preventing enormous corruption due to a free() called on a garbage (malloc'd)
pointer values this time. DO_BUILD_VERY_FAST_PLEASE!
git-svn-id: https://svn.eduke32.com/eduke32@4980 1a8010ca-5511-0410-912e-c29ae57300e0
Since TILE_TILT is only allocated once, it must be done with the maximum
possible size.
git-svn-id: https://svn.eduke32.com/eduke32@4965 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes the out-of-bounds read of former g_player[] in VM_EventCommon_().
git-svn-id: https://svn.eduke32.com/eduke32@4961 1a8010ca-5511-0410-912e-c29ae57300e0
This prevents a enormous leak being reported by LeakSanitizer. Not that it
matters much, since we most frequently free models only at exit. (Sometimes one
may be freed earlier though -- if there was an error loading it, AFAICS.)
git-svn-id: https://svn.eduke32.com/eduke32@4952 1a8010ca-5511-0410-912e-c29ae57300e0
This makes sure that the engine arrays have sufficient space allocated for usage
in Mapster32's 2D mode, for example from drawmapview().
git-svn-id: https://svn.eduke32.com/eduke32@4938 1a8010ca-5511-0410-912e-c29ae57300e0
- t{sector,wall}type are simply typedef'd to the non-t versions
- make FORCE_INLINE unconditional of DISABLE_INLINING (otherwise there are
multiple definitions of these functions)
- update lunatic/doc/lpeg-lunatic.patch to apply against the LPeg 0.12 I just
downloaded
git-svn-id: https://svn.eduke32.com/eduke32@4937 1a8010ca-5511-0410-912e-c29ae57300e0
In setview(), we now assert windowx2 < xdim. The only calling places where its
non-violation is non-trivial to ascertain are (1) showview from CON and
(2) draw-to-tile for look-sideways in game.c. AFAICS case 1 should be fine.
Case 2 is adapted; see comments there.
git-svn-id: https://svn.eduke32.com/eduke32@4935 1a8010ca-5511-0410-912e-c29ae57300e0
replacements for the first handful of palette lookups) w8th superior
"luma" method. DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4889 1a8010ca-5511-0410-912e-c29ae57300e0
This should prevent Lunar Apocalypse from becoming Nuclear Winter with Megaton on Linux and Mac.
git-svn-id: https://svn.eduke32.com/eduke32@4886 1a8010ca-5511-0410-912e-c29ae57300e0
By setting DISTRECIPSIZ to 131072, as far as I can see the absolute maximum
that's possible with the integer scaling convention of the voxel drawing code.
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4881 1a8010ca-5511-0410-912e-c29ae57300e0
- Work around a sequencing issue (assignment of searchstat) in
M32_DrawRoomsAndMasks()
- When having sprites highlighted and changing shade, since r1943 change
every highlighted sprite's shade if one of them is aimed at. With this
revision, if SHIFT is pressed while doing that, only change the aimed at
sprite's shade
- a.m32: Use 'break' from a state instead of 'return'. The former may be
"sticky" in a way that is not intended. Needs to be debugged later.
- Update instructions in m32script_ex.map
DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4880 1a8010ca-5511-0410-912e-c29ae57300e0
Also for polymost_scansector(). These were likely of little consequence
because collection in scansector() is the exception than the rule (see
added comments), and because the redundant drawwalls() would find the
x range done the second and following times.
Also, add a bound check for sectorborder[] (the limit was probably rarely
hit in practice, but the check is mandatory nontheless) and add functions
printscans() and printbunches() in the DEBUGGINGAIDS=2 build.
git-svn-id: https://svn.eduke32.com/eduke32@4877 1a8010ca-5511-0410-912e-c29ae57300e0
There were various issues with that code.
- It does not seem to be very meaningful to do so.
- It was carried out on the same range as the sprites sorted by z coordinate
(those with equal x/y) just a few lines away, effectively overriding it.
The former is very meaningful, though.
- It led to inconsistencies between editor and game, see
http://forums.duke4.net/topic/775-eduke32-20-and-polymer/page__view__findpost__p__214873
git-svn-id: https://svn.eduke32.com/eduke32@4876 1a8010ca-5511-0410-912e-c29ae57300e0
- factor out calculation of player-relative and screen+clipped-player-relative
coordinates into get_rel_coords() and get_screen_coords(), respectively
- the usual beautification stuff, especially since we're now on C99
git-svn-id: https://svn.eduke32.com/eduke32@4875 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, the C function clipmove() returned negative values when hit a
wall (32768+wallnum) or sprite (49152+spritenum) because internally,
these values were encoded into a *signed* 16-bit integer. This made no
difference to C code using it, since it always proceeded by bit checks,
but was inconsistent with documentation on CON 'clipmove' on the wiki.
The following commands are affected too, since they use the value returned
by clipmove(): 'clipmovenoslide', 'movesprite'. Also, the value of
actor[].movflag ('htmovflag' from CON).
Also, fix 'clipmove*' in LunaCON and add lunatic/test/checknearwall.con
as an example of how to implement a being-close-to-a-wall checker as
requested in
http://forums.duke4.net/topic/7869-determining-closeness-to-a-wall/
git-svn-id: https://svn.eduke32.com/eduke32@4874 1a8010ca-5511-0410-912e-c29ae57300e0
- At a given time, at most one viewscreen may display TILE_VIEWSCR, namely
that one which is g_curViewscreen
- sync kinds of distance to compare against VIEWSCREEN_ACTIVE_DISTANCE (was
Manhattan vs. dist(), now both the latter)
- fix resetting to VIEWSCREEN tile when player is greater from it than that
distance. When the player is closer to it again, it is *not* reset to
TILE_VIEWSCR.
- more sync'd g_curViewscreen and sprite[i].yvel (for 'i' being the viewscreen
sprite)
Note: in a multiplayer context, this needs to be thought about once more.
git-svn-id: https://svn.eduke32.com/eduke32@4843 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, we must make sure that dasizeof <= LZWSIZE (or so) in
c1d_{read,write}_compressed() (what the assertion in the last commit was about,
and is now redundant). This fixes saving of e.g. large gamearrays with the C-CON
build. Bump BYTEVERSION.
An alternative for setting dasizeof to 1 would be to factor it and keep dividing
as long as it's > LZWSIZE.
git-svn-id: https://svn.eduke32.com/eduke32@4838 1a8010ca-5511-0410-912e-c29ae57300e0
Analogously to the way models are processed in a deferred manner for Polymer.
git-svn-id: https://svn.eduke32.com/eduke32@4836 1a8010ca-5511-0410-912e-c29ae57300e0
defs.c: sync some dup'd code for 'definevoxel' and 'voxel' DEF tokens.
engine.c: factor out PolymerProcessModels().
git-svn-id: https://svn.eduke32.com/eduke32@4835 1a8010ca-5511-0410-912e-c29ae57300e0
This prevents displaying W_FORCEFIELD+1 masks (as e.g. in front of viewscreens)
completely black with ART mapping. The old behavior, which is inconsistent with
classic, is kept for one-sided masked walls, though.
git-svn-id: https://svn.eduke32.com/eduke32@4830 1a8010ca-5511-0410-912e-c29ae57300e0
*Move the FPS display down from the top of the screen, as we do for quotes.
*Don't show a non-functional mouse cursor in the center of the screen.
*Don't display the "Startup window" option in Game Settings.
*Display the IR pointer crosshair in addition to the aiming crosshair, not instead of it.
*Eliminate some assumptions from wiibuild.bat.
*DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4818 1a8010ca-5511-0410-912e-c29ae57300e0
So that stack traces can be gotten with optimized DEBUGANYWAY builds, e.g. for
Linux's 'perf' --> flame graphs. DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4817 1a8010ca-5511-0410-912e-c29ae57300e0
Now passed as last arg 'noFloorPal' to makepalookup(). Used as follows:
- from loadlookups(): *false*, i.e. do take over floor pal.
- from generatefogpals() [default fog pals] and fillemptylookups(): *true*,
i.e. don't take over floor pal
- from DEF 'fogpal': true
- from DEF 'makepalookup': take over flag from pal from which we are remapping,
or set to true if remapping from pal 0
- (CROSSHAIR_PAL: true)
This should make the issue reported in
http://forums.duke4.net/topic/775-eduke32-20-and-polymer/page__view__findpost__p__197583
resolve in a natural manner.
git-svn-id: https://svn.eduke32.com/eduke32@4812 1a8010ca-5511-0410-912e-c29ae57300e0
- 'nofloorpalrange' DEF token: now handled for both game and editor (for the
latter, it's effective only for "shade preview" mode, [']+[X]).
- in generatefogpals(), assign g_noFloorPal[] = 1 for every generated (default)
fog pal; get rid of its return value / g_firstFogPal
git-svn-id: https://svn.eduke32.com/eduke32@4811 1a8010ca-5511-0410-912e-c29ae57300e0
This reverts/corrects two semantic changes of r4639 as far as what is now
voxmodel.c (formerly part of mdsprite.c) is concerned. One correction ends
up having no effect (m->bscale is always 1.f for voxel models, as far as I
can see), but is the proper rewrite.
Also, in osdcmds.c:registerosdcommands(), tweak two help strings.
git-svn-id: https://svn.eduke32.com/eduke32@4800 1a8010ca-5511-0410-912e-c29ae57300e0
Since we're targeting C99/C++ now, we can finally declare variables as close
to their use as possible.
git-svn-id: https://svn.eduke32.com/eduke32@4797 1a8010ca-5511-0410-912e-c29ae57300e0
Analogously treat maskwallscan() and transmaskwallscan(), although I could
not get the respective accesses to be oob, too.
git-svn-id: https://svn.eduke32.com/eduke32@4757 1a8010ca-5511-0410-912e-c29ae57300e0
- for the first point: 'struct glattribs sdlayer_gl_attributes[]' was defined
at file scope, but 'glmultisample > 0' is not a compile-time constant.
- for the second point: r4749 changed the meaning of some conditional
compilation (supposedly, unintentionally). I'm reverting it to pre-r4749
but keeping the rewritten style. It's concerned with mouse thumb buttons.
git-svn-id: https://svn.eduke32.com/eduke32@4755 1a8010ca-5511-0410-912e-c29ae57300e0
Otherwise, the out-of-memory handler is not called in case of failure.
git-svn-id: https://svn.eduke32.com/eduke32@4736 1a8010ca-5511-0410-912e-c29ae57300e0
Optimizations are left to the reader :P. I would prefer to look for ways of
giving the compilers hints about loops to unroll instead of having to read
the resulting mess of manual unrolling, though.
git-svn-id: https://svn.eduke32.com/eduke32@4728 1a8010ca-5511-0410-912e-c29ae57300e0
On Linux, it started manifesting itself since r4719 as crashes whose
backtraces pointed to malloc() and were not helpful. Valgrind finally
uncovered this.
git-svn-id: https://svn.eduke32.com/eduke32@4724 1a8010ca-5511-0410-912e-c29ae57300e0
The winding of a loop -- with clockdir() -- is determined by examining the
two line segments spanned between the points following a leftmost point of
the loop. If the loop contains a leftmost point that belongs to the "right"
side (as can happen with sliding door constructions), there's a chance that
an outer loop is misclassified.
git-svn-id: https://svn.eduke32.com/eduke32@4580 1a8010ca-5511-0410-912e-c29ae57300e0
And use these in jmact/mathutil.c's FindDistance2D()/FindDistance3D().
The main use is to allow passing dx/dy instead of sprite positions; the code
that actually uses this is not committed.
git-svn-id: https://svn.eduke32.com/eduke32@4579 1a8010ca-5511-0410-912e-c29ae57300e0
They classify former uses of int64_t into two classes:
- coord_t: those that represent coordinates and need 64-bit precision for
proper functioning with large values
- inthi_t: those that were added for e.g. casts merely to prevent undefined
behavior on overflow
DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4578 1a8010ca-5511-0410-912e-c29ae57300e0
This could happen when building outside the "classic" grid limits and would
then lead to e.g. incorrect loop assignment on sector splitting. Bug reported
by MetHy.
git-svn-id: https://svn.eduke32.com/eduke32@4572 1a8010ca-5511-0410-912e-c29ae57300e0
Inspired by
http://forums.duke4.net/topic/7506-tror-question/page__view__findpost__p__199151
the corruption checker now checks for certain conditions of the loops of each
sector. Recall that CW loops are outer and CCW loops are inner.
- If a sector has no or more than one outer loop, count that as corruption
(level 4 and 3, respectively).
- (Disabled) For sectors with exactly one outer loop, check that all inner
ones are inside it. This is currently not compiled due to an asymmetry of
loopinside() for degenerate cases, similar to pre-r3898 inside().
git-svn-id: https://svn.eduke32.com/eduke32@4569 1a8010ca-5511-0410-912e-c29ae57300e0
There are no intended changes of functionality, it's readability tweaks only.
git-svn-id: https://svn.eduke32.com/eduke32@4568 1a8010ca-5511-0410-912e-c29ae57300e0
Note to MSVC users: You can get the revision number if you run `make rev o=obj` with MinGW before you build.
DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4565 1a8010ca-5511-0410-912e-c29ae57300e0
-sdlayer: Apple and GTK are not mutually exclusive.
-Makefile.common: Specify WITHOUT_GTK?=1 by default.
-Makefile: Limit linking with the QuickTime framework to OS X 10.6 and below.
One fix from me:
-osxbuild.sh: Fix building tools.
git-svn-id: https://svn.eduke32.com/eduke32@4548 1a8010ca-5511-0410-912e-c29ae57300e0
1 compiler error.
2 compiler warnings.
1 runtime warning.
Note that at this time, CPLUSPLUS=1 LUNATIC=1 fails to build due to C++ function mangling, and Win64 Lunatic crashes.
DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4540 1a8010ca-5511-0410-912e-c29ae57300e0
1. The application must specify its proper name and technical name. Instead of eduke32_or_mapster32.crash.log, we now have eduke32.crash.log and mapster32.crash.log.
2. The exception handler will display a message box informing the user of a crash and requesting they send in the crash log. The box has three options: "Quit", the DLL's current behavior, "Continue", which passes the exception to the next handler, and "Ignore", which resumes execution immediately. These should allow the user to skip bogus exceptions picked up by ebacktrace, such as one I get with my laptop that causes EDuke32 no issues.
git-svn-id: https://svn.eduke32.com/eduke32@4538 1a8010ca-5511-0410-912e-c29ae57300e0
When that mode is enabled (see below for caveats), wall textures that have a
non-power-of-two height (call it 'h') will be modified to look like in classic:
Let 'H' be the next power of two greater than 'h'. The texture will be uploaded
with height 'H', made up from 'h' hlines of the original texture, followed by
'H'-'h' first hlines of the same.
No panning "corrections" will take place. The mode is disabled by default.
Caveats/notes:
* the mode requires that r_hightile is disabled
* it is not implemented in Polymer
* in the Lunatic build, it is ineffective when a VX map is loaded, as those
display walls with NPOT height textures correctly
git-svn-id: https://svn.eduke32.com/eduke32@4498 1a8010ca-5511-0410-912e-c29ae57300e0
... and cull code that is dead with the X*alloc() versions since they never
return NULL on requesting memory.
Use something like
git grep '[^Xx]\(m\|c\|re\)alloc *('
and
git grep '[^Xx]strdup *('
to see places where I left the B*alloc() calls intact.
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4491 1a8010ca-5511-0410-912e-c29ae57300e0
These wrap the x*alloc or xstrdup functions in compat.c. The handler gets passed
__FILE__, __LINE__ and __func__ (if available) in debugging builds.
Terminating the application process immediately in case of allocation failure
will let us prune many error handling paths and simplify a good portion of code.
git-svn-id: https://svn.eduke32.com/eduke32@4490 1a8010ca-5511-0410-912e-c29ae57300e0
- in mdloadskin() and gloadtile_hi(), use new function check_nonpow2()
(bit-twiddling) instead of loop
- Replace a couple of missed literals with CACHEAD_* enum labels
git-svn-id: https://svn.eduke32.com/eduke32@4488 1a8010ca-5511-0410-912e-c29ae57300e0
Note: in polymer.c, this was buggy (but harmless) because .r is a char:
if ((uint32_t)hictinting[MAXPALOOKUPS-1].r & 0xFFFFFF00) != 0xFFFFFF00)
git-svn-id: https://svn.eduke32.com/eduke32@4487 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, the handling of one-way walls ([1] in Mapster32) was slightly
different.
git-svn-id: https://svn.eduke32.com/eduke32@4484 1a8010ca-5511-0410-912e-c29ae57300e0
Mostly, these are rendering-related variables. We keep *writing* them to
mapster32.cfg so that older Mapster32 versions can be used side-by-side
for now.
git-svn-id: https://svn.eduke32.com/eduke32@4462 1a8010ca-5511-0410-912e-c29ae57300e0
This mode does not take a sector's visibility values into account for uniform
darkening of a texture. It is more faithful to classic with respect to
fog/visibility *distances*, but may be less so as far as the "tint" of the
texture due to visibility attenuation is concerned.
git-svn-id: https://svn.eduke32.com/eduke32@4459 1a8010ca-5511-0410-912e-c29ae57300e0
That is, for every for palette (now, even ones created by the user) the last
shade is the (or rather, a color close to the) full fog color by construction.
In loadpalette(), reject a PALETTE.DAT with only one shade level.
git-svn-id: https://svn.eduke32.com/eduke32@4458 1a8010ca-5511-0410-912e-c29ae57300e0
Concretely, for all 1 <= i <= 255, make graypalookup[31][i] := graypalookup[31][0].
Also document 'fogpal' in the Lunatic doc.
git-svn-id: https://svn.eduke32.com/eduke32@4456 1a8010ca-5511-0410-912e-c29ae57300e0
Also,
- add a static assertion to engine.c
- gameexec.c: compile out an unused function in Lunatic builds
git-svn-id: https://svn.eduke32.com/eduke32@4451 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the game not process as many ticks as have elapsed during the saving
afterwards.
git-svn-id: https://svn.eduke32.com/eduke32@4450 1a8010ca-5511-0410-912e-c29ae57300e0
The extended PALETTE.DAT format can now carry a trailing byte, called
'lognumalphatables'. If it is present, the engine assumes that alpha blending
tables are loaded at blend indices 1 to 1<<lognumalphatables and handles
rotatesprite's alpha and spriteext[].alpha accordingly.
The ability to save this new byte is added to engine.lua:savePaletteDat()
and the corresponding convenience functions in shadexfog.lua.
Examples test/screentext.con and test/sprite_access.con are updated for
demonstration purposes.
git-svn-id: https://svn.eduke32.com/eduke32@4426 1a8010ca-5511-0410-912e-c29ae57300e0
The overall situation is thus as follows:
- in C and from Lua, that member is called 'fogpal'
- In CON (both C-CON and LunaCON), it's 'fogpal' with 'alignto' being an alias;
'filler' wasn't available before, either.
- In m32script, it's 'fogpal' or 'alignto' ('filler' is not available any more)
git-svn-id: https://svn.eduke32.com/eduke32@4416 1a8010ca-5511-0410-912e-c29ae57300e0
That is, if that member has a nonzero value, that one is taken for the color of
the GL fog instead of (most of the time) sector[].floorpal. "Sky sectors", that
is, skyboxes or simply parallaxed floors/ceilings are *not* handled.
git-svn-id: https://svn.eduke32.com/eduke32@4415 1a8010ca-5511-0410-912e-c29ae57300e0
Also, extend the documentation for r_usenewshading a little. Specifically,
note when the different modes were introduced. BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4410 1a8010ca-5511-0410-912e-c29ae57300e0
It was plainly noticeable in the editor's tile info display, for
example.
git-svn-id: https://svn.eduke32.com/eduke32@4409 1a8010ca-5511-0410-912e-c29ae57300e0
This is done by factoring out some polymer.c:polymer_getbuildmaterial() code
into polymer_eligible_for_artmapping() and using that. The one in polymer.c
can still determine to not use ART mapping on some ("rare"?) occasions, so
it's not 100% in sync.
git-svn-id: https://svn.eduke32.com/eduke32@4407 1a8010ca-5511-0410-912e-c29ae57300e0
- factor out eligible_for_tileshades()
- remove some rendmode 1 code
- move some auto vars further down
git-svn-id: https://svn.eduke32.com/eduke32@4406 1a8010ca-5511-0410-912e-c29ae57300e0
With this mode, the near distance of the linear fog is always 0, unlike being
negative with r_usenewshading 2.
git-svn-id: https://svn.eduke32.com/eduke32@4393 1a8010ca-5511-0410-912e-c29ae57300e0
Fix a case in G_MovePlayers(), where the player sprite's shade is approached
toward the ceiling/floor's shade. Before, it could stop at one above or below!
git-svn-id: https://svn.eduke32.com/eduke32@4392 1a8010ca-5511-0410-912e-c29ae57300e0
Make Mapster32 save as map-text if there is a wall with non-zero 'blend'.
git-svn-id: https://svn.eduke32.com/eduke32@4368 1a8010ca-5511-0410-912e-c29ae57300e0
For a 1680x1050 scene standing directly in front of a mirror, this increases
FPS from ~90 to ~95 for me.
git-svn-id: https://svn.eduke32.com/eduke32@4363 1a8010ca-5511-0410-912e-c29ae57300e0
One potential use is to add r_togglecomposition "0" if you don't like Aero turning on and off every time you switch between 2D mode and 32-bit 3D mode.
git-svn-id: https://svn.eduke32.com/eduke32@4344 1a8010ca-5511-0410-912e-c29ae57300e0
- Mapster32: before loading LOOKUP.DAT, set palookup[0][239]=239 to
make an identity map of the base shade table's shade 0
- Rewrite color index remapping case of makepalookup() for clarity
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4336 1a8010ca-5511-0410-912e-c29ae57300e0
As opposed to the previous way, where the first fog pals was <numlookups>+1,
where <numlookups> is the first byte value of LOOKUP.DAT. This allows to
pack e.g. lookups [1 .. 25] and [30 .. <lastpal>] into LOOKUP.DAT and have fog
pals be generated at pals [26 .. 29] (i.e. the additional lookups don't
shift the fog pals, making user maps depending on these numbers not look as
intended.)
git-svn-id: https://svn.eduke32.com/eduke32@4335 1a8010ca-5511-0410-912e-c29ae57300e0
Also, error if didn't read enough data and account for TITLE and REALMS
swap between basepal number and on-disk order (sigh).
git-svn-id: https://svn.eduke32.com/eduke32@4334 1a8010ca-5511-0410-912e-c29ae57300e0
- Added preprocessor value NETVERSION, to be incremented in the source whenever changes are made to the network protocol.
- Implemented proper server-side version verification of all clients upon connection.
- Implemented connection refusal when we reach MAXPLAYERS. (Should be expanded to implement server player caps.)
- Protected against OOB array accesses if an invalid player id is received.
- Renamed all "Recieve" to "Receive".
git-svn-id: https://svn.eduke32.com/eduke32@4322 1a8010ca-5511-0410-912e-c29ae57300e0
Lunatic: also, add an additional argument 'moreblends' to
engine.savePaletteDat() and document that function.
See test/shadexfog.lua for a "user-friendly" wrapper shadexfog.save() which
prints success or errors.
git-svn-id: https://svn.eduke32.com/eduke32@4312 1a8010ca-5511-0410-912e-c29ae57300e0
On the C side, slightly rewrite (now) getclosestcol_lim() for clarity.
git-svn-id: https://svn.eduke32.com/eduke32@4308 1a8010ca-5511-0410-912e-c29ae57300e0
Also, fix a missed .filler -> g_ambiencePlaying[] rewrite in the editor.
In C-CON, 'detail' is kept as alias to C-side (former) .filler / now .blend,
but that name is *deprecated*.
git-svn-id: https://svn.eduke32.com/eduke32@4305 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes updating the viewscreen in Polymer's ART mapping mode.
git-svn-id: https://svn.eduke32.com/eduke32@4304 1a8010ca-5511-0410-912e-c29ae57300e0
Currently, sprite[].filler (to be renamed) selects a blending table. If none
is installed with that index, the blending table at index 0 is taken (which is
read from PALETTE.DAT on engine startup). Thus, for now, the non-Lunatic build
will never use a custom blending table because there's no way to register one!
But the functionality is there.
git-svn-id: https://svn.eduke32.com/eduke32@4301 1a8010ca-5511-0410-912e-c29ae57300e0
- use SPRITES_OF* iterator macros
- new function: E_SpriteIsValid(); add some safety checks
(e.g. hitag used as sprite index)
- the rest is mostly "the usual code transformations"
git-svn-id: https://svn.eduke32.com/eduke32@4281 1a8010ca-5511-0410-912e-c29ae57300e0
- Make Win+F* also make play and RTS sound, since modern OS's window managers
like to eat Alt-F*. (Some Win+F* may be inaccessible too, but together all
10 should hopefully be covered.)
- Fix an issue where keys other than F1-F10 were considered as starting an RTS
sound and crashing EDuke32 in the process
git-svn-id: https://svn.eduke32.com/eduke32@4278 1a8010ca-5511-0410-912e-c29ae57300e0
In the non-Lunatic build naturally, since the Lunatic one uses its own member.
git-svn-id: https://svn.eduke32.com/eduke32@4275 1a8010ca-5511-0410-912e-c29ae57300e0
EDuke32 has me so accustomed to straight C... using a template and pass-by-reference makes my day.
git-svn-id: https://svn.eduke32.com/eduke32@4267 1a8010ca-5511-0410-912e-c29ae57300e0
In simple cases, it should be added. Combinations of alignment across TROR
boundaries and bottom-swapping will probably not work right.
git-svn-id: https://svn.eduke32.com/eduke32@4265 1a8010ca-5511-0410-912e-c29ae57300e0
Concretely, in the "behind, outside" case, draw the sprite early if any of its
2 or 4 corner points are behind the masked wall, and inside the cone or on the
other outside.
git-svn-id: https://svn.eduke32.com/eduke32@4264 1a8010ca-5511-0410-912e-c29ae57300e0
This prevents a crash and maybe other badnesses when e.g. loading a map
with ART tiles, doing something that allocates a reserved tile (such as
looking into a viewscreen), then loading another map where the tilesiz*
of TILE_VIEWSCR is restored to 0.
git-svn-id: https://svn.eduke32.com/eduke32@4259 1a8010ca-5511-0410-912e-c29ae57300e0
When a map named <filename>.map is loaded (<filename> may also contain directory
separators), the engine checks for existence of <filename>_XX.art in the virtual
file system, where XX is a 0-padded number from 00 to 19. It loads a consecutive
sequence of these ART files, i.e. aborts whenever a number in the sequence isn't
found (in contrast to normal ART loading).
Restrictions:
- the per-map ART files must not reside in ZIP files
- if a tile number is attempted to be overridden that has a dummytile or is
cache1d-locked, per-map ART loading fails
On failure, the map is still loaded, but a diagnostic message is output to the
log/OSD.
Loaded per-map ART data are cleared whenever the map is "left". In particular:
- whenever another map is loaded
- in the editor: when a new map is started
- in the game: after the bonus ending screen of a finished level, after going
to the title screen via the menu
A final note: file names are supposed to be looked up and compared
case-sensitively. That is, <filename> must match EXACTLY between the map's and
per-map ART one; 'art' must be lowercase. Otherwise, the cookie monster will
come and eat you!
BUILD_LUNATIC.
git-svn-id: https://svn.eduke32.com/eduke32@4257 1a8010ca-5511-0410-912e-c29ae57300e0
