- Added functions to FActorInfo that can set the damage factors and
pain chances to reduce the chance of new errors when working with
these features.
- Fixed: The handling of the deprecated FIRERESIST flag didn't work.
There were 3 problems:
* Actor defaults have no class information so HandleDeprecatedFlags
needs to be passed a pointer to the ActorInfo.
* The DamageFactors list is only created when needed so the code needs to
check if it already exists.
* damage factors are stored as fixed_t but this set a float.
- Added a traditional Strife color set for the automap.
SVN r1183 (trunk)
the texture manager even if it is from Raven's IWADs.
- Removed code related to internal ActorInfo definitions from dobjtype.cpp.
- removed unneeded file dehackedactions.h
SVN r1162 (trunk)
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
that animated icons can be done with it.
- Changed FImageCollection to use a TArray to hold its data.
- Fixed: SetChanHeadSettings did an assignment instead of comparing
the channel ID witg CHAN_CEILING.
- Changed sound sequence names for animated doors to FNames.
- Automatically fixed: DCeiling didn't properly serialize its texture id.
- Replaced integers as texture ID representation with a specific new type
to track down all potentially incorrect uses and remaining WORDs used
for texture IDs so that more than 32767 or 65535 textures can be defined.
SVN r1036 (trunk)
of all types on the same linedef. Also added a 'first side only' flag. This
is not usable from Hexen or Doom format maps though but in preparation of
the UDMF format discussed here:
http://www.doomworld.com/vb/source-ports/43145-udmf-v0-99-specification-draft-aka-textmap/
- Changed linedef's alpha property from a byte to fixed point after seeing that
255 wasn't handled to be fully opaque.
- fixed a GCC warning in fmodsound.cpp
SVN r954 (trunk)
flag are only drawn as part of a secret sector if that secret has already
been found, even if the option is set to always show secret sectors.
- Added a NULL pointer check to WI_LoadBackground.
SVN r885 (trunk)
line.
- Fixed: P_SpawnPuff assumed that all melee attacks have the same range
(MELEERANGE) and didn't set the puff to its melee state if the range
was different. Even worse, it checked a global variable for this so
the behavior was undefined when P_SpawnPuff was called from anywhere
else but P_LineAttack. To reduce the amount of parameters I combined
this information with the hitthing and temporary parameters into one
flags parameter. Also changed P_LineAttack so that it gets passed
an additional parameter that specifies whether the attack is a melee
attack or not and set this to true in all calls that are to be considered
melee attacks. I couldn't use the damage type because A_CustomPunch
and A_CustomMeleeAttack allow passing any damage type they want.
- Added a sprite option as an alternative of particles for FX_ROCKET
and FX_GRENADE.
SVN r879 (trunk)
DECORATE was wrong (2 instead of 1.)
- Changed: Hexen set every cluster to be a hub if it hadn't been defined before
a level using this cluster. Now it will only do that if HexenHack is true,
i.e. when original Hexen format MAPINFOs are parsed. For ZDoom format
MAPINFOs it will now be the same as for the other games which means that
'hub' has to be declared explicitly.
- Added an Idle state that is entered in place of the spawn state if a monster
has to return to its inactive state if it can't find any more targets.
- Added MF5_NOINTERACTION flag which completely disables all physics related
code for any actor with this flag. Mostly useful for particle effects where
the actors just move a certain distance and then disappear.
- Removed the last remains of the antialias precalculation code from
am_map.cpp because it was no longer used.
- Fixed: Two-sided lines bordering a secret sector were not drawn in the
proper color
- Fixed: The automap didn't check ACS_LockedExecuteDoor for its lock color.
SVN r876 (trunk)
to a map they've previously been to. This is analagous to enter scripts, but
whereas enter scripts execute only the first time a player enters a map,
return scripts execute all but the first time.
- Improved map scrolling when rotation is on and follow mode is off.
SVN r742 (trunk)
function in an easy-to-understand manner.
- Fixed: D_AddWildFile() blindly assumed that all matches were files.
- Added back the dead player check to CheckIfExitIsGood(), but now it
applies only if the next map is part of the same hub. Otherwise, you can
still exit the map while dead.
- Removed the SpawnedPuff global variable and made it a return value from
P_LineAttack().
- Fixed: P_SpawnPuff() played sounds for temporary puffs.
SVN r739 (trunk)
- Added .txt files to the list of types (wad, zip, and pk3) that can be
loaded without listing them after -file.
- Fonts that are created by the ACS setfont command to wrap a texture now
support animated textures.
- FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn
with the hardware 2D path instead of being restricted to the game palette.
- Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1
on a Radeon 9000.
- Added back the off-by-one palette handling, but in a much more limited
scope than before. The skipped entry is assumed to always be at 248, and
it is assumed that all Shader Model 1.4 cards suffer from this. That's
because all SM1.4 cards are based on variants of the ATI R200 core, and the
RV250 in a Radeon 9000 craps up like this. I see no reason to assume that
other flavors of the R200 are any different. (Interesting note: With the
Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the
debug Direct3D 9 runtime, but it works perfectly fine with the retail
Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its
math inside pixel shaders. That would explain perfectly why I can't use
constants greater than 1 with PS1.4 and why it can't do an exact mapping to
every entry in the color palette.
- Fixed: The software shaded drawer did not work for 2D, because its selected
"color"map was replaced with the identitymap before being used.
- Fixed: I cannot use Printf to output messages before the framebuffer was
completely setup, meaning that Shader Model 1.4 cards could not change
resolution.
- I have decided to let remap palettes specify variable alpha values for
their colors. D3DFB no longer forces them to 255.
- Updated re2c to version 0.12.3.
- Fixed: A_Wander used threshold as a timer, when it should have used
reactiontime.
- Fixed: A_CustomRailgun would not fire at all for actors without a target
when the aim parameter was disabled.
- Made the warp command work in multiplayer, again courtesy of Karate Chris.
- Fixed: Trying to spawn a bot while not in a game made for a crashing time.
(Patch courtesy of Karate Chris.)
- Removed some floating point math from hu_scores.cpp that somebody's GCC
gave warnings for (not mine, though).
- Fixed: The SBarInfo drawbar command crashed if the sprite image was
unavailable.
- Fixed: FString::operator=(const char *) did not release its old buffer when
being assigned to the null string.
- The scanner no longer has an upper limit on the length of strings it
accepts, though short strings will be faster than long ones.
- Moved all the text scanning functions into a class. Mainly, this means that
multiple script scanner states can be stored without being forced to do so
recursively. I think I might be taking advantage of that in the near
future. Possibly. Maybe.
- Removed some potential buffer overflows from the decal parser.
- Applied Blzut3's SBARINFO update #9:
* Fixed: When using even length values in drawnumber it would cap to a 98
value instead of a 99 as intended.
* The SBarInfo parser can now accept negatives for coordinates. This
doesn't allow much right now, but later I plan to add better fullscreen
hud support in which the negatives will be more useful. This also cleans
up the source a bit since all calls for (x, y) coordinates are with the
function getCoordinates().
- Added support for stencilling actors.
- Added support for non-black colors specified with DTA_ColorOverlay to the
software renderer.
- Fixed: The inverse, gold, red, and green fixed colormaps each allocated
space for 32 different colormaps, even though each only used the first one.
- Added two new blending flags to make reverse subtract blending more useful:
STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that
gets blended with the background, since that seems like a good idea for
reverse subtraction. They also work with the other two blending operations.
- Added subtract and reverse subtract blending operations to the renderer.
Since the ERenderStyle enumeration was getting rather unwieldy, I converted
it into a new FRenderStyle structure that lets each parameter of the
blending equation be set separately. This simplified the set up for the
blend quite a bit, and it means a number of new combinations are available
by setting the parameters properly.
SVN r710 (trunk)
vertex buffer, made line batching automatic, and added an index buffer for
use when batching quads. The index buffer actually offered more of a
performance boost than simply batching the quads alone did.
SVN r685 (trunk)
and into the vertex data.
- Added functions for doing line drawing with Direct3D, including a new pair
of functions to do batched line drawing so that the map can actually be
drawn faster in hardware than in software (instead of an order of magnitude
slower).
SVN r663 (trunk)
- Moved the common code of ACS and DECORATE translation generation into the
FRemapTable class.
- Fixed: The DECORATE translation code was not changed for the new data structures.
- Expanded range of ACS and DECORATE translations to 65535.
- Fixed: R_CopyTranslation was not altered for the new functionality.
I removed the function and replaced the one use with a simple assignment.
SVN r644 (trunk)
palettes smaller than 256 entries with the shader I wrote for it. Is there
a list of gotchas like this listed some where? I'd really like to see it.
Well, when compiled with SM2.0, the PalTex shader seems to be every-so-
slightly faster on my GF7950GT than the SM1.4 version, so I guess it's a
minor win for cards that support it.
- Fixed: ST_Endoom() failed to free the bitmap it used.
- Added the DTA_ColorOverlay attribute to blend a color with the texture
being drawn. For software, this (currently) only works with black. For
hardware, it works with any color. The motiviation for this was so I could
rewrite the status bar calls that passed DIM_MAP to DTA_Translation to
draw darker icons into something that didn't require making a whole new
remap table.
- After having an "OMG! How could I have been so stupid?" moment, I have
removed the off-by-one check from D3DFB. I had thought the off-by-one error
was caused by rounding errors by the shader hardware. Not so. Rather, I
wasn't sampling what I thought I was sampling. A texture that uses palette
index 255 passes the value 1.0 to the shader. The shader needs to adjust the
range of its palette indexes, or it will end up trying to read color 256
from the palette texture when it should be reading color 255. Doh!
- The TranslationToTable() function has been added to map from translation
numbers used by actors to the tables those numbers represent. This function
performs validation for the input and returns NULL if the input value
is invalid.
- Major changes to the way translation tables work: No longer are they each a
256-byte array. Instead, the FRemapTable structure is used to represent each
one. It includes a remap array for the software renderer, a palette array
for a hardware renderer, and a native texture pointer for D3DFB. The
translationtables array itself is now an array of TArrays that point to the
real tables. The DTA_Translation attribute must also be passed a pointer
to a FRemapTable, not a byte array as previously.
- Modified DFrameBuffer::DrawRateStuff() so that it can do its thing properly
for D3DFB's 2D mode. Before, any fullscreen graphics (like help images)
covered it up.
SVN r640 (trunk)
- moved the AM line drawer into DCanvas as a virtual function. While testing
this code I discovered that the antialias precalculation was never used
except for the very first frame of AM drawing. However, since I couldn't
detect even a marginal performance improvement using this code on 2 computers
I just disabled it completely because it severely complicates a more generic
implementation. I also disabled am_ovtrans in the process because I couldn't
see any positive effects of using this cvar. All it does is adding some
ugly distortion to the lines it affects without any apparent benefits.
* Added fix by Karate Chris containing:
- Added a 'No team changing' DMFlag2 which prevents players from changing teams
unless they are not on a team.
- Added a 'No respawn' DMFlag2 which prevents a player from respawning after
they have died.
- Added a 'Keep frags gained' DMFlag2 which allows you to choose whether you
want to reset the frags of each player next level or not.
- Added a small visual enhancement to the cooperative scoreboard to show
if a player has died.
- Fixed: If the 'teamplay' console variable was set to 'true' in a cooperative
game, the scoreboard would show team play related items as opposed to
cooperative items.
- Fixed: The 'bot_observer' console variable should not work in network games.
- Fixed: Bots made intermission skip really fast.
SVN r634 (trunk)
passing renderer specific data to the function. Also added DTA_Font so
that the renderer can fetch font translations from the proper font.
DIM_MAP/ConShade had to be made a regular translation table to make it
work.
- Added Karate Chris's fix for scoreboard displaying team play related data
in non teamplay games.
- Fixed: The team selection menu didn't work.
- Fixed: UpdateTeam passed an FString to Printf.
SVN r623 (trunk)
- Added a new color parameter to DCanvas::Clear() that specifies the
ARGB value of the color. This is used if the old color parameter,
which specifies a palette entry, is -1.
SVN r617 (trunk)
I forgot to change the call that draws the automap marker numbers.
- Fixed: The chaingun-flash-checking code always checked the first player,
not the calling one.
- Fixed: Hitscan traces didn't hit actors when entering from above or below
SVN r551 (trunk)
- Fixed: DECORATE color translations with explicit colors didn't work because the
code treated byte values as fixed point.
- Fixed: LEVEL_NOALLIES must clear MF_FRIENDLY off any spawned actor except players.
Otherwise it doesn't work properly.
- Fixed: Entering a backslash in the player's name box caused a crash because
the code analyzing the string was missing a NULL pointer check.
- Fixed: Thing_Hate and Teleport_ZombieChanger unconditionally made state jumps,
even for dead monsters.
- Fixed: The palette flash for item pickup was not reset upon a player's death.
- Fixed: P_DamageMobj tried to get damage multiplier information from the
damage inflictor, not the attacker.
- Fixed: PowerTimeFreezer::DoEffect did not call its superclass method.
- fixed: When morphed monsters died they tried to set MF3_STAYMORPHED for the
attacker, not themselves. This caused a crash when they were killed by a crusher.
SVN r539 (trunk)
on the automap instead. If its first argument is zero, the map marker itself
appears on the automap, otherwise it is drawn on top of any actor with a TID
matching that argument. If the second argument is one, then the map marker
will only be appear if the player has previously seen the sector it is one.
You can use Thing_Activate and Thing_Deactivate on markers to turn them on
and off. And if you subclass MapMarker with DECORATE, you can easily make
your own custom markers.
- Fixed: Map markers could not be drawn partially off the map. They were
drawn either fully or not at all.
- Fixed: Map markers appeared in the wrong place on a rotated overlay map if
screenblocks < 10.
SVN r356 (trunk)
- The stat meters now return an FString instead of sprintfing into a fixed
output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
- For consistancy with the other integral types, byte is no longer a
synonym for BYTE.
- Most uses of BOOL have been change to the standard C++ bool type. Those
that weren't were changed to INTBOOL to indicate they may contain values
other than 0 or 1 but are still used as a boolean.
- Compiler-provided types with explicit bit sizes are now used. In
particular, DWORD is no longer a long so it will work with both 64-bit
Windows and Linux.
- Since some files need to include Windows headers, uint32 is a synonym
for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
was all it contained.
SVN r326 (trunk)
The lump is open anyway at that time so deferring this action until the information
is needed doesn't give any speed improvements. Now GetDimensions and all its
associated overhead is gone.
- Added support for TGA textures. It can handle all of the common variations
of this format.
- Changed: GI_PAGESARERAW is no longer checked. It wasn't really necessary before
because the chance of texture misidentification is absolutely minimal.
But raw pages are now restricted to textures of type TEX_MiscPatch only.
- Changed the automap parchment to use a regular texture. The previous
FAutomapTexture is only used as a last resort fallback now. If the code
finds a recognizable graphic it will create a proper texture for it now.
- Fixed: Flats were only auto-scaled when in Doom flat format.
- Fixed: FMultiPatchTexture::CheckForHacks blindly assumed that all patches
were FPstchTextures. Since the texture code does not have any type information
I added a new flag bIsPatch for this purpose.
- Moved all texture classes into their own source files and created a new
subdirectory 'textures' for that.
- Cleaned up the texture management code and added some stricter checks for
the validity of Doom patches. The old code liked to crash when being passed
some non-graphic data.
SVN r300 (trunk)
- Changed f_finale.cpp/atkstates[] into a static variable, since its
anonymous type prevents it from being accessed from other files anyway.
- Fixed: The behavior of the eventtail advancement in d_net.cpp/CheckAbort()
was compiler-dependant.
- Fixed warnings GCC 4 threw up while compiling re2c and lemon.
- Removed __cdecl from makewad.c again. This is already defined as a builtin
for MinGW, and redefining it produces a warning. (Why is main explicitly
declared __cdecl anyway?)
- Fixed building ccdv-win32 with GCC 4. GCC 4 creates a memcpy call, which
won't work because it doesn't get linked with the standard C library.
SVN r135 (trunk)
- Changed type PClass::FreeIndices to TArray<unsigned int> because that's
the type of the indices.
- Fixed: makewad.c needs __cdecl for non-Windows builds.
- Fixed: FinishThingdef didn't check whether the WeaponClass pointer in
AWeaponPiece was a valid name.
SVN r133 (trunk)
memcpy to copy the player structures.
- Fixed compilation with MinGW again and removed most of the new warnings.
And following is the log that I forgot to paste in for the previous commit:
- Changed the memory management for FString. Instead of using a garbage
collected heap, it now uses normal heap calls and reference counting to
implement lazy copying. You may now use bitwise operators to move
(but not copy!) FStrings around in memory. This means that the
CopyForTArray template function is gone, since TArrays can now freely
move their contents around without bothering with their specifics.
There is one important caveat, however. It is not acceptable to blindly 0
an FString's contents. This necessitated the creation of a proper
constructor for player_s so that it can be reset without using memset. I
did a quick scan of all memsets in the source and didn't see anything else
with a similar problem, but it's possible I missed something.
- Fixed: Build tiles were never deallocated.
- Fixed: Using Build's palette.dat only got half the palette right.
SVN r117 (trunk)
