continue spinning until the next time around because the check for moving too fast was only
done after the polyobject had been rotated once.
- Reduced the potential for overflow when setting up the speed of a rotating polyobj.
SVN r4332 (trunk)
can perform based on the amount of damage actually taken after all modifications are done to
it. However, if the damage is canceled away, blood will still spawn for the original damage
amount rather than the modified amount.
SVN r4012 (trunk)
alters the opening. This fixes things such as removing a projectile when it hits a 3D midtex
instead of exploding it because the real floor or ceiling is sky.
SVN r3490 (trunk)
- fixed: APROP_Invulnerable could only be set and unset but not checked.
- fixed: Two sided polyobjects applied thrust to sctors in a way that did not work.
SVN r2620 (trunk)
- added Polyobj_MoveToSpot action specials. They are functionally identical to Polyobj_MoveTo but get the target coordinate from a map spot instead.
SVN r2503 (trunk)
SoundSequenceOnActor(int tid, string seqname);
SoundSequenceOnSector(int tag, string seqname, int location);
SoundSequenceOnPolyobj(int polynum, string seqname);
SoundSequenceOnSector takes an extra parameter that specifies where in the
sector the sound comes from (floor, ceiling, interior, or all of it). See
the SECSEQ defines in zdefs.acs.
SVN r1939 (trunk)
velocity, and now it's known as such. The actor variables momx/momy/momz
are now known as velx/vely/velz, and the ACS functions GetActorMomX/Y/Z
are now known as GetActorVelX/Y/Z. For compatibility, momx/momy/momz will
continue to work as aliases from DECORATE. The ACS functions, however,
require you to use the new name, since they never saw an official release
yet.
SVN r1689 (trunk)
sounds are handled.
- Why do polyobjects have a 3D start spot? Flattened it to 2D.
- Moved the sector sound origin calculation out of fmodsound.cpp and into
s_sound.cpp so that the near sound limiting will use the correct sound
location for deciding on neighbors.
SVN r1061 (trunk)
might still be present in the texture manager; I don't remember.)
- Fixed: EndSequence needs a proper constructor.
- Some more GCC warning removals.
SVN r1021 (trunk)
were doing some things in their destructor that needed to be done in the
Destroy method.
- Rewrote the interpolation code. Interpolations are no longer some objects
that are separate from the rest of the engine. Instead, they are owned by
the thinkers starting them. Also, polyobjects only spawn a single interpolation
for each polyobject instead of a single one for each vertex.
Also, different types of interpolation objects are used for different types
of interpolation so that they can do some additional work if eventually needed.
SVN r1018 (trunk)
They are not needed anywhere else.
- Changed the HackHack hack for corrupt 256 pixel high textures that
FMultiPatchTexture only calls a virtual function instead of doing any
type checks of the patch itself.
- Cleaned up the constant definitions in doomdata.h.
- Moved the TEXTUREx structures from doomdata.h to multipatchtexture.cpp
because they are used only in this one file.
- Removed some more typedefs from r_defs.h and doomdata.h
- Moved local polyobject data definitions from p_local.h to po_man.cpp.
SVN r1012 (trunk)
(actors being forced to the ground by instantly moving sectors, strife
railing handling and shooting lines with a non-zero but unassigned tag.)
With UDMF such semantics have to be handled diffently.
- finalized UDMF 1.0 implementation.
- Added Martin Howe's latest morph update.
SVN r987 (trunk)
P_FindFloorCeiling never did that.
- Merged Check_Sides and PIT_CrossLine into A_PainShootSkull.
- Replaced P_BlockLinesIterator with FBlockLinesIterator in all places it was
used. This also allowed to remove all the global variable saving in
P_CreateSecNodeList.
- Added a new FBlockLinesIterator class that doesn't need a callback
function because debugging the previous bug proved to be a bit annoying
because it involved a P_BlockLinesIterator loop.
- Fixed: The MBF code to move monsters away from dropoffs did not work as
intended due to some random decisions in P_DoNewChaseDir. When in the
avoiding dropoff mode these are ignored now. This should cure the problem
that monsters hanging over a dropoff tended to drop down.
SVN r887 (trunk)
- Fixed two problems with printfs from the net controller stuff: one of them
is totally valid, and the other is GCC not being as nice as VC++.
- Fixed: The case for defining SAVESIG when SVN_REVISION_NUMBER == 0 did not
work for GCC (and presumably VC++, though I never ran into that case with
it) because it tried to stringify something that wasn't a macro argument.
SVN r762 (trunk)
to PO_MovePolyobj() from P_SerializePolyobjs() for a crushing polyobject
that touches a player actor will not have a valid actor->player->mo chain
for P_DamageMobj and crash if it happens to touch the player. Since the
polyobject was presumably in a good spot when the game was saved, we can
just skip this step entirely and let it take care of itself the next time
it moves (by which time, the players will be valid).
- Fixed: When transitioning from fullscreen to windowed mode with D3DFB, the
window kept the WS_EX_TOPMOST style.
- Slight correctness fix: When in fullscreen, the window should have WS_POPUP
style.
- Added a NULL target check to P_SpawnMissileXYZ(), A_DemonAttack1(),
A_DemonAttack2_1(), and A_DemonAttack2_2().
SVN r384 (trunk)
with an FString now.
- Fixed: The music strings in the default level info were never freed and
caused memory leaks when used repeatedly.
- Fixed: The intermusic string in the level info was never freed.
- Fixed: The default fire obituary should only be printed if the damage
came from the environment. If it comes from a monster the monster specific
obituary should be used instead.
- Added custom damage types from the floating point test release.
- Changed Pain Elemental's massacre check. Now A_PainDie checks for the damage
type and doesn't spawn anything if it is NAME_Massacre. A_PainDie can also
be used by other actors so a more generalized approach is needed than hard
coding it into the Pain Elemental.
- Converted a few of Doom's monsters to DECORATE because I couldn't test the
first version of the custom state code with the corpses inheriting from them.
- Added custom states from last year's floating point test release and fixed
some bugs I found in that code. Unfortunately it wasn't all salvageable
and it was easier to recreate some parts from scratch.
SVN r368 (trunk)
- The stat meters now return an FString instead of sprintfing into a fixed
output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
- For consistancy with the other integral types, byte is no longer a
synonym for BYTE.
- Most uses of BOOL have been change to the standard C++ bool type. Those
that weren't were changed to INTBOOL to indicate they may contain values
other than 0 or 1 but are still used as a boolean.
- Compiler-provided types with explicit bit sizes are now used. In
particular, DWORD is no longer a long so it will work with both 64-bit
Windows and Linux.
- Since some files need to include Windows headers, uint32 is a synonym
for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
was all it contained.
SVN r326 (trunk)
- Polyobj_StartLine and Polyobj_ExplicitLine can now set a line's ID. This is
the fourth parameter for Polyobj_StartLine and the fifth parameter for
Polyobj_ExplicitLine.
SVN r310 (trunk)
- Converted a_zombie.cpp and most of a_strifestuff.cpp to DECORATE.
- Converted a_strifekeys.cpp to DECORATE and moved the pickup messages to the
string table.
- Removed the WIF_HITS_GHOSTS weapon flag and replaced it with MF2_THRUGHOST.
There is no need to keep two flags around with virtually the same meaning.
- Changed the ShadowArmor to use the VISIBILITYPULSE flag to change its translucency.
It looks much better now than the cheap code pointer based blinking it used before.
- Converted most of a_strifeitems.cpp to DECORATE and moved the pickup messages
to the string table.
- Converted a_strifearmor.cpp to DECORATE and moved the pickup messages to the
string table.
- Moved the messages for killing spectres to the string table.
- Converted the quest items to DECORATE. Also changed A_GiveQuestItem to get
the messages it prints from the string table instead of the quest item's tag
string.
May 5, 2006 (Changes by Graf Zahl)
- Removed the hopelessly outdated thingdef_doc.txt file from the repository.
- Converted a_peasant.cpp and a_ratbuddy.cpp to DECORATE.
- Fixed: C_DoKey didn't treat an empty string as 'no binding' when checking for
valid double bindings.
- Converted a_merchants.cpp to DECORATE.
- Added MF5_NODAMAGE flag to generalize the behavior of Strife's merchants which
can be shot but take no damage from getting hurt.
- Converted a_beggars.cpp to DECORATE.
- Added an Inventory.GiveQuest property. This makes it possible to define all of
Strife's original items that also give a quest item in DECORATE but it is also
useful to define items like the ones in Day of the Acolyte without ugly workarounds.
- Added a Tag property and Strife teaser conversation IDs to DECORATE so now it is
possible to define many of Strife's items.
- Added a FastSpeed property to DECORATE so that projectiles can finally be
assigned a higher speed for fast mode.
- Added a ACS_LockedExecuteDoor special. It is basically the same as the existing
ACS_LockedExecute but it uses the 'door' message instead of 'remote'. This
cannot be integrated into ACS_LockedExecute because all its arguments are already
in use.
- Added a fully customizable A_CustomMeleeAttack function for DECORATE.
SVN r83 (trunk)
actually work.
- Turned the list of TabCommands into a TArray because I saw lots of console
commands in the memory leak report at exit. Then I realized those were actually
key bindings, so I changed the Bindings and DoubleBindings arrays into FString
arrays.
- Fixed: FStringCVar was missing a destructor.
- Added TArray::Insert().
- Fixed: TArray::Delete() used memmove().
- Renamed Malloc(), Realloc(), and Calloc() to M_Malloc(), M_Realloc(), and
M_Calloc() so that the debug versions can be defined as macros.
- Enabled the CRT's memory leak detection in WinMain().
- Moved contents of PO_DeInit() into P_FreeLevelData().
- Removed "PolyBlockMap = NULL;" from P_SetupLevel(), because the P_FreeLevelData()
call it makes next does the exact same thing, but also freeing it if needed.
- Fixed: Unneeded memcpy in UnpackUserCmd() when ucmd and basis are the same
SVN r75 (trunk)
- Added multiple-choice sound sequences. These overcome one of the major
deficiences of the Hexen-inherited SNDSEQ system while still being Hexen
compatible: Custom door sounds can now use different opening and closing
sequences, for both normal and blazing speeds.
- Added a serializer for TArray.
- Added a countof macro to doomtype.h. See the1's blog to find out why
it's implemented the way it is.
<http://blogs.msdn.com/the1/articles/210011.aspx>
- Added a new method to FRandom for getting random numbers larger than 255,
which lets me:
- Fixed: SNDSEQ delayrand commands could delay for no more than 255 tics.
- Fixed: If you're going to have sector_t.SoundTarget, then they need to
be included in the pointer cleanup scans.
- Ported back newer name code from 2.1.
- Fixed: Using -warp with only one parameter in Doom and Heretic to
select a map on episode 1 no longer worked.
- New: Loading a multiplayer save now restores the players based on
their names rather than on their connection order. Using connection
order was sensible when -net was the only way to start a network game,
but with -host/-join, it's not so nice. Also, if there aren't enough
players in the save, then the extra players will be spawned normally,
so you can continue a saved game with more players than you started it
with.
- Added some new SNDSEQ commands to make it possible to define Heretic's
ambient sounds in SNDSEQ: volumerel, volumerand, slot, randomsequence,
delayonce, and restart. With these, it is basically possible to obsolete
all of the $ambient SNDINFO commands.
- Fixed: Sound sequences would only execute one command each time they were
ticked.
- Fixed: No bounds checking was done on the volume sound sequences played at.
- Fixed: The tic parameter to playloop was useless and caused it to
act like a redundant playrepeat. I have removed all the logic that
caused playloop to play repeating sounds, and now it acts like an
infinite sequence of play/delay commands until the sequence is
stopped.
- Fixed: Sound sequences were ticked every frame, not every tic, so all
the delay commands were timed incorrectly and varied depending on your
framerate. Since this is useful for restarting looping sounds that got
cut off, I have not changed this. Instead, the delay commands now
record the tic when execution should resume, not the number of tics
left to delay.
SVN r57 (trunk)
- Changed: Decal scales now use full precision fixed point numbers.
- Changed: Keeping impact decals in their own statlist is enough to keep track
of them for when one needs to be destroyed. There's no need to maintain a
separate list for them.
- Fixed: Decal actors did not spread their decals across neighboring walls.
- Fixed: Decal groups did not initialize their IDs and could not be reliably
used with the decal actor.
- Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal()
now uses the decal's LeftDistance to calculate its visible location, so it
always stays in sync with the wall's vertices. This also lets me dump some
code from the polyobjects that maintained the decals' (x, y) coordinates.
Also, the decals' x and y information is redundant and can be removed.
Doing this revealed a bug with slider decals and horizontal sliding:
That is, it didn't work at all. I have opted to simply remove the horizontal
sliding support so that I don't have to worry about what happens when a
decal slides across the edge of a wall.
- Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number.
It should be 2.30 fixed point.
SVN r35 (trunk)
returning from one function to another function when the function that
was called was used as part of an expression.
- Fixed: Using Thing_Hate with arg0 (hater) set to 0 from an open script
could crash.
- Fixed: Some items along ledges in Hexen's MAP32 (Orchard of Lamentations)
appeared at the bottom of the ledge (and consequently inside it) instead
of on top of it because the items were placed directly on the lines.
AActor::LinkToWorldForMapThing() needs to use the original R_PointOnLineSide()
code to handle situations like this. Previously, it just used the original
code for straight horizontal/vertical lines and used the new code for
diagonal lines.
- Fixed: FWadCollection::MergeLumps() used in incorrect realloc.
- Fixed: FPlayList::NextLine() did not properly handle blank lines in the
playlist.
- Changed: Decals now use lightweight thinkers instead of actors. (76 bytes
versus 396, so you save 320k if you have 1024 decals present.)
- Fixed: Wads added with pullin were loaded immediately after the IWAD.
Exec files are now processed immediately before -file but after autoloading
wads in D_DoomMain().
- Fixed: sdl/i_system.h unconditionally defined SHARE_DIR, preventing
redefinition from the command line.
- Fixed: The standard way to include SDL.h is <SDL.h>, not <SDL/SDL.h>.
- Fixed: Returned FActiveInterpolation::HashKey()'s return type to size_t,
avoiding a pointer truncation warning.
SVN r30 (trunk)
