gzdoom/src/p_udmf.cpp

1891 lines
46 KiB
C++
Raw Normal View History

/*
** p_udmf.cpp
**
** UDMF text map parser
**
**---------------------------------------------------------------------------
** Copyright 2008 Christoph Oelckers
** All rights reserved.
**
** Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions
** are met:
**
** 1. Redistributions of source code must retain the above copyright
** notice, this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright
** notice, this list of conditions and the following disclaimer in the
** documentation and/or other materials provided with the distribution.
** 3. The name of the author may not be used to endorse or promote products
** derived from this software without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**---------------------------------------------------------------------------
**
*/
#include "doomstat.h"
#include "p_setup.h"
#include "p_lnspec.h"
#include "templates.h"
#include "i_system.h"
#include "gi.h"
#include "r_sky.h"
#include "g_level.h"
#include "v_palette.h"
#include "p_udmf.h"
#include "r_state.h"
#include "r_data/colormaps.h"
#include "w_wad.h"
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
//===========================================================================
//
// Maps for Hexen namespace need to filter out all extended line and sector
// specials to comply with the spec.
//
//===========================================================================
static char HexenLineSpecialOk[]={
1,1,1,1,1,1,1,1,1,0, // 0-9
1,1,1,1,0,0,0,0,0,0, // 10-19
1,1,1,1,1,1,1,1,1,1, // 20-29
1,1,1,0,0,1,1,0,0,0, // 30-39
1,1,1,1,1,1,1,0,0,0, // 40-49
0,0,0,0,0,0,0,0,0,0, // 50-59
1,1,1,1,1,1,1,1,1,1, // 60-69
1,1,1,1,1,1,0,0,0,0, // 70-79
1,1,1,1,0,0,0,0,0,0, // 80-89
1,1,1,1,1,1,1,0,0,0, // 90-99
1,1,1,1,0,0,0,0,0,1, // 100-109
1,1,1,1,1,1,1,0,0,0, // 110-119
1,0,0,0,0,0,0,0,0,1, // 120-129
1,1,1,1,1,1,1,1,1,0, // 130-139
1
// 140 is the highest valid special in Hexen.
};
static char HexenSectorSpecialOk[256]={
1,1,1,1,1,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,1,1,0,0,
0,0,0,0,0,0,0,0,0,0,
1,1,1,1,1,1,1,1,1,1,
1,1,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,0,0,
0,0,0,0,0,0,0,0,1,1,
1,1,1,1,1,1,1,1,1,1,
1,1,1,1,1,
};
static inline bool P_IsThingSpecial(int specnum)
{
return (specnum >= Thing_Projectile && specnum <= Thing_SpawnNoFog) ||
specnum == Thing_SpawnFacing || Thing_ProjectileIntercept || Thing_ProjectileAimed;
}
enum
{
Dm=1,
Ht=2,
Hx=4,
St=8,
Zd=16,
Zdt=32,
Va=64,
// will be extended later. Unknown namespaces will always be treated like the base
// namespace for each game
};
void SetTexture (sector_t *sector, int index, int position, const char *name, FMissingTextureTracker &, bool truncate);
void P_ProcessSideTextures(bool checktranmap, side_t *sd, sector_t *sec, intmapsidedef_t *msd, int special, int tag, short *alpha, FMissingTextureTracker &);
void P_AdjustLine (line_t *ld);
void P_FinishLoadingLineDef(line_t *ld, int alpha);
void SpawnMapThing(int index, FMapThing *mt, int position);
extern bool ForceNodeBuild;
extern TArray<FMapThing> MapThingsConverted;
extern TArray<int> linemap;
#define CHECK_N(f) if (!(namespace_bits&(f))) break;
//===========================================================================
//
// Common parsing routines
//
//===========================================================================
//===========================================================================
//
// Skip a key or block
//
//===========================================================================
void UDMFParserBase::Skip()
{
if (developer) sc.ScriptMessage("Ignoring unknown key \"%s\".", sc.String);
if(sc.CheckToken('{'))
{
int level = 1;
while(sc.GetToken())
{
if (sc.TokenType == '}')
{
level--;
if(level == 0)
{
sc.UnGet();
break;
}
}
else if (sc.TokenType == '{')
{
level++;
}
}
}
else
{
sc.MustGetToken('=');
do
{
sc.MustGetAnyToken();
}
while(sc.TokenType != ';');
}
}
//===========================================================================
//
// Parses a 'key = value' line of the map
//
//===========================================================================
FName UDMFParserBase::ParseKey(bool checkblock, bool *isblock)
{
sc.MustGetString();
FName key = sc.String;
if (checkblock)
{
if (sc.CheckToken('{'))
{
if (isblock) *isblock = true;
return key;
}
else if (isblock) *isblock = false;
}
sc.MustGetToken('=');
sc.Number = 0;
sc.Float = 0;
sc.MustGetAnyToken();
if (sc.TokenType == '+' || sc.TokenType == '-')
{
bool neg = (sc.TokenType == '-');
sc.MustGetAnyToken();
if (sc.TokenType != TK_IntConst && sc.TokenType != TK_FloatConst)
{
sc.ScriptMessage("Numeric constant expected");
}
if (neg)
{
sc.Number = -sc.Number;
sc.Float = -sc.Float;
}
}
if (sc.TokenType == TK_StringConst)
{
parsedString = sc.String;
}
int savedtoken = sc.TokenType;
sc.MustGetToken(';');
sc.TokenType = savedtoken;
return key;
}
//===========================================================================
//
// Syntax checks
//
//===========================================================================
int UDMFParserBase::CheckInt(const char *key)
{
if (sc.TokenType != TK_IntConst)
{
sc.ScriptMessage("Integer value expected for key '%s'", key);
}
return sc.Number;
}
double UDMFParserBase::CheckFloat(const char *key)
{
if (sc.TokenType != TK_IntConst && sc.TokenType != TK_FloatConst)
{
sc.ScriptMessage("Floating point value expected for key '%s'", key);
}
return sc.Float;
}
fixed_t UDMFParserBase::CheckFixed(const char *key)
{
return FLOAT2FIXED(CheckFloat(key));
}
angle_t UDMFParserBase::CheckAngle(const char *key)
{
return angle_t(CheckFloat(key) * ANGLE_90 / 90.);
}
bool UDMFParserBase::CheckBool(const char *key)
{
if (sc.TokenType == TK_True) return true;
if (sc.TokenType == TK_False) return false;
sc.ScriptMessage("Boolean value expected for key '%s'", key);
return false;
}
const char *UDMFParserBase::CheckString(const char *key)
{
if (sc.TokenType != TK_StringConst)
{
sc.ScriptMessage("String value expected for key '%s'", key);
}
return parsedString;
}
//===========================================================================
//
// Storage of UDMF user properties
//
//===========================================================================
typedef TMap<int, FUDMFKeys> FUDMFKeyMap;
static FUDMFKeyMap UDMFKeys[4];
// Things must be handled differently
void P_ClearUDMFKeys()
{
for(int i=0;i<4;i++)
{
UDMFKeys[i].Clear();
}
}
static int STACK_ARGS udmfcmp(const void *a, const void *b)
{
FUDMFKey *A = (FUDMFKey*)a;
FUDMFKey *B = (FUDMFKey*)b;
return int(A->Key) - int(B->Key);
}
void FUDMFKeys::Sort()
{
qsort(&(*this)[0], Size(), sizeof(FUDMFKey), udmfcmp);
}
FUDMFKey *FUDMFKeys::Find(FName key)
{
int min = 0, max = Size()-1;
while (min <= max)
{
int mid = (min + max) / 2;
if ((*this)[mid].Key == key)
{
return &(*this)[mid];
}
else if ((*this)[mid].Key <= key)
{
min = mid + 1;
}
else
{
max = mid - 1;
}
}
return NULL;
}
//===========================================================================
//
// Retrieves UDMF user properties
//
//===========================================================================
int GetUDMFInt(int type, int index, const char *key)
{
assert(type >=0 && type <=3);
FUDMFKeys *pKeys = UDMFKeys[type].CheckKey(index);
if (pKeys != NULL)
{
FUDMFKey *pKey = pKeys->Find(key);
if (pKey != NULL)
{
return pKey->IntVal;
}
}
return 0;
}
fixed_t GetUDMFFixed(int type, int index, const char *key)
{
assert(type >=0 && type <=3);
FUDMFKeys *pKeys = UDMFKeys[type].CheckKey(index);
if (pKeys != NULL)
{
FUDMFKey *pKey = pKeys->Find(key);
if (pKey != NULL)
{
return FLOAT2FIXED(pKey->FloatVal);
}
}
return 0;
}
//===========================================================================
//
// UDMF parser
//
//===========================================================================
class UDMFParser : public UDMFParserBase
{
bool isTranslated;
bool isExtended;
bool floordrop;
TArray<line_t> ParsedLines;
TArray<side_t> ParsedSides;
TArray<intmapsidedef_t> ParsedSideTextures;
TArray<sector_t> ParsedSectors;
TArray<vertex_t> ParsedVertices;
TArray<vertexdata_t> ParsedVertexDatas;
FDynamicColormap *fogMap, *normMap;
FMissingTextureTracker &missingTex;
public:
UDMFParser(FMissingTextureTracker &missing)
: missingTex(missing)
{
linemap.Clear();
fogMap = normMap = NULL;
}
void AddUserKey(FName key, int kind, int index)
{
FUDMFKeys &keyarray = UDMFKeys[kind][index];
for(unsigned i=0; i < keyarray.Size(); i++)
{
if (keyarray[i].Key == key)
{
switch (sc.TokenType)
{
case TK_IntConst:
keyarray[i] = sc.Number;
break;
case TK_FloatConst:
keyarray[i] = sc.Float;
break;
default:
case TK_StringConst:
keyarray[i] = parsedString;
break;
case TK_True:
keyarray[i] = 1;
break;
case TK_False:
keyarray[i] = 0;
break;
}
return;
}
}
FUDMFKey ukey;
ukey.Key = key;
switch (sc.TokenType)
{
case TK_IntConst:
ukey = sc.Number;
break;
case TK_FloatConst:
ukey = sc.Float;
break;
default:
case TK_StringConst:
ukey = parsedString;
break;
case TK_True:
ukey = 1;
break;
case TK_False:
ukey = 0;
break;
}
keyarray.Push(ukey);
}
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
//===========================================================================
//
// Parse a thing block
//
//===========================================================================
void ParseThing(FMapThing *th)
{
FString arg0str, arg1str;
memset(th, 0, sizeof(*th));
th->gravity = FRACUNIT;
2014-04-10 22:58:59 +00:00
th->RenderStyle = STYLE_Count;
th->alpha = -1;
th->health = 1;
sc.MustGetToken('{');
while (!sc.CheckToken('}'))
{
FName key = ParseKey();
switch(key)
{
case NAME_Id:
th->thingid = CheckInt(key);
break;
case NAME_X:
th->x = CheckFixed(key);
break;
case NAME_Y:
th->y = CheckFixed(key);
break;
case NAME_Height:
th->z = CheckFixed(key);
break;
case NAME_Angle:
th->angle = (short)CheckInt(key);
break;
case NAME_Type:
th->EdNum = (short)CheckInt(key);
th->info = DoomEdMap.CheckKey(th->EdNum);
break;
case NAME_Conversation:
CHECK_N(Zd | Zdt)
th->Conversation = CheckInt(key);
break;
case NAME_Special:
CHECK_N(Hx | Zd | Zdt | Va)
th->special = CheckInt(key);
break;
case NAME_Gravity:
CHECK_N(Zd | Zdt)
th->gravity = CheckFixed(key);
break;
case NAME_Arg0:
case NAME_Arg1:
case NAME_Arg2:
case NAME_Arg3:
case NAME_Arg4:
CHECK_N(Hx | Zd | Zdt | Va)
th->args[int(key)-int(NAME_Arg0)] = CheckInt(key);
break;
case NAME_Arg0Str:
CHECK_N(Zd);
arg0str = CheckString(key);
break;
case NAME_Arg1Str:
CHECK_N(Zd);
arg1str = CheckString(key);
break;
case NAME_Skill1:
case NAME_Skill2:
case NAME_Skill3:
case NAME_Skill4:
case NAME_Skill5:
case NAME_Skill6:
case NAME_Skill7:
case NAME_Skill8:
case NAME_Skill9:
case NAME_Skill10:
case NAME_Skill11:
case NAME_Skill12:
case NAME_Skill13:
case NAME_Skill14:
case NAME_Skill15:
case NAME_Skill16:
if (CheckBool(key)) th->SkillFilter |= (1<<(int(key)-NAME_Skill1));
else th->SkillFilter &= ~(1<<(int(key)-NAME_Skill1));
break;
case NAME_Class1:
case NAME_Class2:
case NAME_Class3:
case NAME_Class4:
case NAME_Class5:
case NAME_Class6:
case NAME_Class7:
case NAME_Class8:
case NAME_Class9:
case NAME_Class10:
case NAME_Class11:
case NAME_Class12:
case NAME_Class13:
case NAME_Class14:
case NAME_Class15:
case NAME_Class16:
CHECK_N(Hx | Zd | Zdt | Va)
if (CheckBool(key)) th->ClassFilter |= (1<<(int(key)-NAME_Class1));
else th->ClassFilter &= ~(1<<(int(key)-NAME_Class1));
break;
case NAME_Ambush:
Flag(th->flags, MTF_AMBUSH, key);
break;
case NAME_Dormant:
CHECK_N(Hx | Zd | Zdt | Va)
Flag(th->flags, MTF_DORMANT, key);
break;
case NAME_Single:
Flag(th->flags, MTF_SINGLE, key);
break;
case NAME_Coop:
Flag(th->flags, MTF_COOPERATIVE, key);
break;
case NAME_Dm:
Flag(th->flags, MTF_DEATHMATCH, key);
break;
case NAME_Translucent:
CHECK_N(St | Zd | Zdt | Va)
Flag(th->flags, MTF_SHADOW, key);
break;
case NAME_Invisible:
CHECK_N(St | Zd | Zdt | Va)
Flag(th->flags, MTF_ALTSHADOW, key);
break;
case NAME_Friend: // This maps to Strife's friendly flag
CHECK_N(Dm | Zd | Zdt | Va)
Flag(th->flags, MTF_FRIENDLY, key);
break;
case NAME_Strifeally:
CHECK_N(St | Zd | Zdt | Va)
Flag(th->flags, MTF_FRIENDLY, key);
break;
case NAME_Standing:
CHECK_N(St | Zd | Zdt | Va)
Flag(th->flags, MTF_STANDSTILL, key);
break;
case NAME_Countsecret:
CHECK_N(Zd | Zdt | Va)
Flag(th->flags, MTF_SECRET, key);
break;
2014-04-10 22:58:59 +00:00
case NAME_Renderstyle:
{
FName style = CheckString(key);
switch (style)
{
case NAME_None:
th->RenderStyle = STYLE_None;
break;
case NAME_Normal:
th->RenderStyle = STYLE_Normal;
break;
case NAME_Fuzzy:
th->RenderStyle = STYLE_Fuzzy;
break;
case NAME_SoulTrans:
th->RenderStyle = STYLE_SoulTrans;
break;
case NAME_OptFuzzy:
th->RenderStyle = STYLE_OptFuzzy;
break;
case NAME_Stencil:
th->RenderStyle = STYLE_Stencil;
break;
case NAME_AddStencil:
th->RenderStyle = STYLE_AddStencil;
break;
2014-04-10 22:58:59 +00:00
case NAME_Translucent:
th->RenderStyle = STYLE_Translucent;
break;
case NAME_Add:
case NAME_Additive:
th->RenderStyle = STYLE_Add;
break;
case NAME_Shaded:
th->RenderStyle = STYLE_Shaded;
break;
case NAME_AddShaded:
th->RenderStyle = STYLE_AddShaded;
break;
2014-04-10 22:58:59 +00:00
case NAME_TranslucentStencil:
th->RenderStyle = STYLE_TranslucentStencil;
break;
case NAME_Shadow:
th->RenderStyle = STYLE_Shadow;
break;
case NAME_Subtract:
case NAME_Subtractive:
th->RenderStyle = STYLE_Subtract;
break;
2014-04-12 08:55:10 +00:00
default:
break;
2014-04-10 22:58:59 +00:00
}
}
break;
2014-04-10 22:58:59 +00:00
case NAME_Alpha:
th->alpha = CheckFixed(key);
break;
2014-04-10 22:58:59 +00:00
case NAME_FillColor:
th->fillcolor = CheckInt(key);
break;
2014-04-10 22:58:59 +00:00
case NAME_Health:
th->health = CheckInt(key);
break;
2014-04-10 22:58:59 +00:00
case NAME_Score:
th->score = CheckInt(key);
break;
2014-04-10 22:58:59 +00:00
case NAME_Pitch:
th->pitch = (short)CheckInt(key);
break;
case NAME_Roll:
th->roll = (short)CheckInt(key);
break;
case NAME_ScaleX:
th->scaleX = CheckFixed(key);
break;
case NAME_ScaleY:
th->scaleY = CheckFixed(key);
break;
case NAME_Scale:
th->scaleX = th->scaleY = CheckFixed(key);
break;
default:
if (0 == strnicmp("user_", key.GetChars(), 5))
{ // Custom user key - Sets an actor's user variable directly
FMapThingUserData ud;
ud.Property = key;
ud.Value = CheckInt(key);
MapThingsUserData.Push(ud);
}
break;
}
}
if (arg0str.IsNotEmpty() && (P_IsACSSpecial(th->special) || th->special == 0))
{
th->args[0] = -FName(arg0str);
}
if (arg1str.IsNotEmpty() && (P_IsThingSpecial(th->special) || th->special == 0))
{
th->args[1] = -FName(arg1str);
}
// Thing specials are only valid in namespaces with Hexen-type specials
// and in ZDoomTranslated - which will use the translator on them.
if (namespc == NAME_ZDoomTranslated)
{
maplinedef_t mld;
line_t ld;
if (th->special != 0) // if special is 0, keep the args (e.g. for bridge things)
{
// The trigger type is ignored here.
mld.flags = 0;
mld.special = th->special;
mld.tag = th->args[0];
P_TranslateLineDef(&ld, &mld);
th->special = ld.special;
memcpy(th->args, ld.args, sizeof (ld.args));
}
}
else if (isTranslated)
{
th->special = 0;
memset(th->args, 0, sizeof (th->args));
}
}
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
//===========================================================================
//
// Parse a linedef block
//
//===========================================================================
void ParseLinedef(line_t *ld, int index)
{
bool passuse = false;
bool strifetrans = false;
bool strifetrans2 = false;
FString arg0str, arg1str;
memset(ld, 0, sizeof(*ld));
ld->Alpha = FRACUNIT;
ld->id = -1;
ld->sidedef[0] = ld->sidedef[1] = NULL;
if (level.flags2 & LEVEL2_CLIPMIDTEX) ld->flags |= ML_CLIP_MIDTEX;
if (level.flags2 & LEVEL2_WRAPMIDTEX) ld->flags |= ML_WRAP_MIDTEX;
if (level.flags2 & LEVEL2_CHECKSWITCHRANGE) ld->flags |= ML_CHECKSWITCHRANGE;
sc.MustGetToken('{');
while (!sc.CheckToken('}'))
{
FName key = ParseKey();
// This switch contains all keys of the UDMF base spec
switch(key)
{
case NAME_V1:
ld->v1 = (vertex_t*)(intptr_t)CheckInt(key); // must be relocated later
continue;
case NAME_V2:
ld->v2 = (vertex_t*)(intptr_t)CheckInt(key); // must be relocated later
continue;
case NAME_Special:
ld->special = CheckInt(key);
if (namespc == NAME_Hexen)
{
if (ld->special < 0 || ld->special > 140 || !HexenLineSpecialOk[ld->special])
ld->special = 0; // NULL all specials which don't exist in Hexen
}
continue;
case NAME_Id:
ld->id = CheckInt(key);
continue;
case NAME_Sidefront:
ld->sidedef[0] = (side_t*)(intptr_t)(1 + CheckInt(key));
continue;
case NAME_Sideback:
ld->sidedef[1] = (side_t*)(intptr_t)(1 + CheckInt(key));
continue;
case NAME_Arg0:
case NAME_Arg1:
case NAME_Arg2:
case NAME_Arg3:
case NAME_Arg4:
ld->args[int(key)-int(NAME_Arg0)] = CheckInt(key);
continue;
case NAME_Arg0Str:
CHECK_N(Zd);
arg0str = CheckString(key);
continue;
case NAME_Arg1Str:
CHECK_N(Zd);
arg1str = CheckString(key);
continue;
case NAME_Blocking:
Flag(ld->flags, ML_BLOCKING, key);
continue;
case NAME_Blockmonsters:
Flag(ld->flags, ML_BLOCKMONSTERS, key);
continue;
case NAME_Twosided:
Flag(ld->flags, ML_TWOSIDED, key);
continue;
case NAME_Dontpegtop:
Flag(ld->flags, ML_DONTPEGTOP, key);
continue;
case NAME_Dontpegbottom:
Flag(ld->flags, ML_DONTPEGBOTTOM, key);
continue;
case NAME_Secret:
Flag(ld->flags, ML_SECRET, key);
continue;
case NAME_Blocksound:
Flag(ld->flags, ML_SOUNDBLOCK, key);
continue;
case NAME_Dontdraw:
Flag(ld->flags, ML_DONTDRAW, key);
continue;
case NAME_Mapped:
Flag(ld->flags, ML_MAPPED, key);
continue;
case NAME_Jumpover:
CHECK_N(St | Zd | Zdt | Va)
Flag(ld->flags, ML_RAILING, key);
continue;
case NAME_Blockfloaters:
CHECK_N(St | Zd | Zdt | Va)
Flag(ld->flags, ML_BLOCK_FLOATERS, key);
continue;
case NAME_Translucent:
CHECK_N(St | Zd | Zdt | Va)
strifetrans = CheckBool(key);
continue;
case NAME_Transparent:
CHECK_N(St | Zd | Zdt | Va)
strifetrans2 = CheckBool(key);
continue;
case NAME_Passuse:
CHECK_N(Dm | Zd | Zdt | Va)
passuse = CheckBool(key);
continue;
default:
break;
}
// This switch contains all keys of the UDMF base spec which only apply to Hexen format specials
if (!isTranslated) switch (key)
{
case NAME_Playercross:
Flag(ld->activation, SPAC_Cross, key);
continue;
case NAME_Playeruse:
Flag(ld->activation, SPAC_Use, key);
continue;
case NAME_Playeruseback:
Flag(ld->activation, SPAC_UseBack, key);
continue;
case NAME_Monstercross:
Flag(ld->activation, SPAC_MCross, key);
continue;
case NAME_Impact:
Flag(ld->activation, SPAC_Impact, key);
continue;
case NAME_Playerpush:
Flag(ld->activation, SPAC_Push, key);
continue;
case NAME_Missilecross:
Flag(ld->activation, SPAC_PCross, key);
continue;
case NAME_Monsteruse:
Flag(ld->activation, SPAC_MUse, key);
continue;
case NAME_Monsterpush:
Flag(ld->activation, SPAC_MPush, key);
continue;
case NAME_Repeatspecial:
Flag(ld->flags, ML_REPEAT_SPECIAL, key);
continue;
default:
break;
}
// This switch contains all keys which are ZDoom specific
if (namespace_bits & (Zd|Zdt|Va)) switch(key)
{
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Alpha:
ld->Alpha = CheckFixed(key);
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Renderstyle:
{
const char *str = CheckString(key);
if (!stricmp(str, "translucent")) ld->flags &= ~ML_ADDTRANS;
else if (!stricmp(str, "add")) ld->flags |= ML_ADDTRANS;
else sc.ScriptMessage("Unknown value \"%s\" for 'renderstyle'\n", str);
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
}
case NAME_Anycross:
Flag(ld->activation, SPAC_AnyCross, key);
continue;
case NAME_Monsteractivate:
Flag(ld->flags, ML_MONSTERSCANACTIVATE, key);
continue;
case NAME_Blockplayers:
Flag(ld->flags, ML_BLOCK_PLAYERS, key);
continue;
case NAME_Blockeverything:
Flag(ld->flags, ML_BLOCKEVERYTHING, key);
continue;
case NAME_Zoneboundary:
Flag(ld->flags, ML_ZONEBOUNDARY, key);
continue;
case NAME_Clipmidtex:
Flag(ld->flags, ML_CLIP_MIDTEX, key);
continue;
case NAME_Wrapmidtex:
Flag(ld->flags, ML_WRAP_MIDTEX, key);
continue;
case NAME_Midtex3d:
Flag(ld->flags, ML_3DMIDTEX, key);
continue;
case NAME_Checkswitchrange:
Flag(ld->flags, ML_CHECKSWITCHRANGE, key);
continue;
case NAME_Firstsideonly:
Flag(ld->flags, ML_FIRSTSIDEONLY, key);
continue;
case NAME_blockprojectiles:
Flag(ld->flags, ML_BLOCKPROJECTILE, key);
continue;
case NAME_blockuse:
Flag(ld->flags, ML_BLOCKUSE, key);
continue;
case NAME_blocksight:
Flag(ld->flags, ML_BLOCKSIGHT, key);
continue;
2013-08-09 18:35:10 +00:00
case NAME_blockhitscan:
Flag(ld->flags, ML_BLOCKHITSCAN, key);
continue;
// [TP] Locks the special with a key
case NAME_Locknumber:
ld->locknumber = CheckInt(key);
continue;
// [TP] Causes a 3d midtex to behave like an impassible line
case NAME_Midtex3dimpassible:
Flag(ld->flags, ML_3DMIDTEX_IMPASS, key);
continue;
default:
break;
}
if (!strnicmp("user_", key.GetChars(), 5))
{
AddUserKey(key, UDMF_Line, index);
}
}
if (isTranslated)
{
int saved = ld->flags;
maplinedef_t mld;
memset(&mld, 0, sizeof(mld));
mld.special = ld->special;
mld.tag = ld->id;
P_TranslateLineDef(ld, &mld);
ld->flags = saved | (ld->flags&(ML_MONSTERSCANACTIVATE|ML_REPEAT_SPECIAL|ML_FIRSTSIDEONLY));
}
if (passuse && (ld->activation & SPAC_Use))
{
ld->activation = (ld->activation & ~SPAC_Use) | SPAC_UseThrough;
}
if (strifetrans && ld->Alpha == FRACUNIT)
{
ld->Alpha = FRACUNIT * 3/4;
}
if (strifetrans2 && ld->Alpha == FRACUNIT)
{
ld->Alpha = FRACUNIT * 1/4;
}
if (ld->sidedef[0] == NULL)
{
ld->sidedef[0] = (side_t*)(intptr_t)(1);
Printf("Line %d has no first side.\n", index);
}
if (arg0str.IsNotEmpty() && (P_IsACSSpecial(ld->special) || ld->special == 0))
{
ld->args[0] = -FName(arg0str);
}
if (arg1str.IsNotEmpty() && (P_IsThingSpecial(ld->special) || ld->special == 0))
{
ld->args[1] = -FName(arg1str);
}
if ((ld->flags & ML_3DMIDTEX_IMPASS) && !(ld->flags & ML_3DMIDTEX)) // [TP]
{
Printf ("Line %d has midtex3dimpassible without midtex3d.\n", index);
}
}
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
//===========================================================================
//
// Parse a sidedef block
//
//===========================================================================
void ParseSidedef(side_t *sd, intmapsidedef_t *sdt, int index)
{
fixed_t texofs[2]={0,0};
memset(sd, 0, sizeof(*sd));
sdt->bottomtexture = "-";
sdt->toptexture = "-";
sdt->midtexture = "-";
sd->SetTextureXScale(FRACUNIT);
sd->SetTextureYScale(FRACUNIT);
sd->Index = index;
sc.MustGetToken('{');
while (!sc.CheckToken('}'))
{
FName key = ParseKey();
switch(key)
{
case NAME_Offsetx:
texofs[0] = CheckInt(key) << FRACBITS;
continue;
case NAME_Offsety:
texofs[1] = CheckInt(key) << FRACBITS;
continue;
case NAME_Texturetop:
sdt->toptexture = CheckString(key);
continue;
case NAME_Texturebottom:
sdt->bottomtexture = CheckString(key);
continue;
case NAME_Texturemiddle:
sdt->midtexture = CheckString(key);
continue;
case NAME_Sector:
sd->sector = (sector_t*)(intptr_t)CheckInt(key);
continue;
default:
break;
}
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
if (namespace_bits & (Zd|Zdt|Va)) switch(key)
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
{
case NAME_offsetx_top:
sd->SetTextureXOffset(side_t::top, CheckFixed(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_offsety_top:
sd->SetTextureYOffset(side_t::top, CheckFixed(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_offsetx_mid:
sd->SetTextureXOffset(side_t::mid, CheckFixed(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_offsety_mid:
sd->SetTextureYOffset(side_t::mid, CheckFixed(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_offsetx_bottom:
sd->SetTextureXOffset(side_t::bottom, CheckFixed(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_offsety_bottom:
sd->SetTextureYOffset(side_t::bottom, CheckFixed(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_scalex_top:
sd->SetTextureXScale(side_t::top, CheckFixed(key));
continue;
case NAME_scaley_top:
sd->SetTextureYScale(side_t::top, CheckFixed(key));
continue;
case NAME_scalex_mid:
sd->SetTextureXScale(side_t::mid, CheckFixed(key));
continue;
case NAME_scaley_mid:
sd->SetTextureYScale(side_t::mid, CheckFixed(key));
continue;
case NAME_scalex_bottom:
sd->SetTextureXScale(side_t::bottom, CheckFixed(key));
continue;
case NAME_scaley_bottom:
sd->SetTextureYScale(side_t::bottom, CheckFixed(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_light:
sd->SetLight(CheckInt(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_lightabsolute:
Flag(sd->Flags, WALLF_ABSLIGHTING, key);
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_lightfog:
Flag(sd->Flags, WALLF_LIGHT_FOG, key);
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_nofakecontrast:
Flag(sd->Flags, WALLF_NOFAKECONTRAST, key);
continue;
case NAME_smoothlighting:
Flag(sd->Flags, WALLF_SMOOTHLIGHTING, key);
continue;
case NAME_Wrapmidtex:
Flag(sd->Flags, WALLF_WRAP_MIDTEX, key);
continue;
case NAME_Clipmidtex:
Flag(sd->Flags, WALLF_CLIP_MIDTEX, key);
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Nodecals:
Flag(sd->Flags, WALLF_NOAUTODECALS, key);
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
default:
break;
}
if (!strnicmp("user_", key.GetChars(), 5))
{
AddUserKey(key, UDMF_Side, index);
}
}
// initialization of these is delayed to allow separate offsets and add them with the global ones.
sd->AddTextureXOffset(side_t::top, texofs[0]);
sd->AddTextureXOffset(side_t::mid, texofs[0]);
sd->AddTextureXOffset(side_t::bottom, texofs[0]);
sd->AddTextureYOffset(side_t::top, texofs[1]);
sd->AddTextureYOffset(side_t::mid, texofs[1]);
sd->AddTextureYOffset(side_t::bottom, texofs[1]);
}
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
//===========================================================================
//
// parse a sector block
//
//===========================================================================
void ParseSector(sector_t *sec, int index)
{
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
int lightcolor = -1;
int fadecolor = -1;
int desaturation = -1;
int fplaneflags = 0, cplaneflags = 0;
double fp[4] = { 0 }, cp[4] = { 0 };
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
memset(sec, 0, sizeof(*sec));
sec->lightlevel = 160;
sec->SetXScale(sector_t::floor, FRACUNIT); // [RH] floor and ceiling scaling
sec->SetYScale(sector_t::floor, FRACUNIT);
sec->SetXScale(sector_t::ceiling, FRACUNIT);
sec->SetYScale(sector_t::ceiling, FRACUNIT);
sec->SetAlpha(sector_t::floor, FRACUNIT);
sec->SetAlpha(sector_t::ceiling, FRACUNIT);
sec->thinglist = NULL;
sec->touching_thinglist = NULL; // phares 3/14/98
sec->seqType = (level.flags & LEVEL_SNDSEQTOTALCTRL) ? 0 : -1;
sec->nextsec = -1; //jff 2/26/98 add fields to support locking out
sec->prevsec = -1; // stair retriggering until build completes
sec->heightsec = NULL; // sector used to get floor and ceiling height
sec->sectornum = index;
if (floordrop) sec->Flags = SECF_FLOORDROP;
// killough 3/7/98: end changes
sec->gravity = 1.f; // [RH] Default sector gravity of 1.0
sec->ZoneNumber = 0xFFFF;
// killough 8/28/98: initialize all sectors to normal friction
sec->friction = ORIG_FRICTION;
sec->movefactor = ORIG_FRICTION_FACTOR;
sc.MustGetToken('{');
while (!sc.CheckToken('}'))
{
FName key = ParseKey();
switch(key)
{
case NAME_Heightfloor:
sec->SetPlaneTexZ(sector_t::floor, CheckInt(key) << FRACBITS);
continue;
case NAME_Heightceiling:
sec->SetPlaneTexZ(sector_t::ceiling, CheckInt(key) << FRACBITS);
continue;
case NAME_Texturefloor:
SetTexture(sec, index, sector_t::floor, CheckString(key), missingTex, false);
continue;
case NAME_Textureceiling:
SetTexture(sec, index, sector_t::ceiling, CheckString(key), missingTex, false);
continue;
case NAME_Lightlevel:
sec->lightlevel = sector_t::ClampLight(CheckInt(key));
continue;
case NAME_Special:
sec->special = (short)CheckInt(key);
if (isTranslated) sec->special = P_TranslateSectorSpecial(sec->special);
else if (namespc == NAME_Hexen)
{
if (sec->special < 0 || sec->special > 255 || !HexenSectorSpecialOk[sec->special])
sec->special = 0; // NULL all unknown specials
}
continue;
case NAME_Id:
sec->SetTag((short)CheckInt(key), false);
continue;
default:
break;
}
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
if (namespace_bits & (Zd|Zdt|Va)) switch(key)
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
{
case NAME_Xpanningfloor:
sec->SetXOffset(sector_t::floor, CheckFixed(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Ypanningfloor:
sec->SetYOffset(sector_t::floor, CheckFixed(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Xpanningceiling:
sec->SetXOffset(sector_t::ceiling, CheckFixed(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Ypanningceiling:
sec->SetYOffset(sector_t::ceiling, CheckFixed(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Xscalefloor:
sec->SetXScale(sector_t::floor, CheckFixed(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Yscalefloor:
sec->SetYScale(sector_t::floor, CheckFixed(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Xscaleceiling:
sec->SetXScale(sector_t::ceiling, CheckFixed(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Yscaleceiling:
sec->SetYScale(sector_t::ceiling, CheckFixed(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Rotationfloor:
sec->SetAngle(sector_t::floor, CheckAngle(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Rotationceiling:
sec->SetAngle(sector_t::ceiling, CheckAngle(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Lightfloor:
sec->SetPlaneLight(sector_t::floor, CheckInt(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Lightceiling:
sec->SetPlaneLight(sector_t::ceiling, CheckInt(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Alphafloor:
sec->SetAlpha(sector_t::floor, CheckFixed(key));
continue;
case NAME_Alphaceiling:
sec->SetAlpha(sector_t::ceiling, CheckFixed(key));
continue;
case NAME_Renderstylefloor:
{
const char *str = CheckString(key);
if (!stricmp(str, "translucent")) sec->ChangeFlags(sector_t::floor, PLANEF_ADDITIVE, 0);
else if (!stricmp(str, "add")) sec->ChangeFlags(sector_t::floor, 0, PLANEF_ADDITIVE);
else sc.ScriptMessage("Unknown value \"%s\" for 'renderstylefloor'\n", str);
continue;
}
case NAME_Renderstyleceiling:
{
const char *str = CheckString(key);
if (!stricmp(str, "translucent")) sec->ChangeFlags(sector_t::ceiling, PLANEF_ADDITIVE, 0);
else if (!stricmp(str, "add")) sec->ChangeFlags(sector_t::ceiling, 0, PLANEF_ADDITIVE);
else sc.ScriptMessage("Unknown value \"%s\" for 'renderstyleceiling'\n", str);
continue;
}
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Lightfloorabsolute:
if (CheckBool(key)) sec->ChangeFlags(sector_t::floor, 0, PLANEF_ABSLIGHTING);
else sec->ChangeFlags(sector_t::floor, PLANEF_ABSLIGHTING, 0);
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Lightceilingabsolute:
if (CheckBool(key)) sec->ChangeFlags(sector_t::ceiling, 0, PLANEF_ABSLIGHTING);
else sec->ChangeFlags(sector_t::ceiling, PLANEF_ABSLIGHTING, 0);
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Gravity:
sec->gravity = float(CheckFloat(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Lightcolor:
lightcolor = CheckInt(key);
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Fadecolor:
fadecolor = CheckInt(key);
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Desaturation:
desaturation = int(255*CheckFloat(key));
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Silent:
Flag(sec->Flags, SECF_SILENT, key);
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_NoRespawn:
Flag(sec->Flags, SECF_NORESPAWN, key);
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Nofallingdamage:
Flag(sec->Flags, SECF_NOFALLINGDAMAGE, key);
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_Dropactors:
Flag(sec->Flags, SECF_FLOORDROP, key);
continue;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
case NAME_SoundSequence:
sec->SeqName = CheckString(key);
sec->seqType = -1;
continue;
case NAME_hidden:
Flag(sec->MoreFlags, SECF_HIDDEN, key);
break;
case NAME_Waterzone:
Flag(sec->MoreFlags, SECF_UNDERWATER, key);
break;
case NAME_floorplane_a:
fplaneflags |= 1;
fp[0] = CheckFloat(key);
break;
case NAME_floorplane_b:
fplaneflags |= 2;
fp[1] = CheckFloat(key);
break;
case NAME_floorplane_c:
fplaneflags |= 4;
fp[2] = CheckFloat(key);
break;
case NAME_floorplane_d:
fplaneflags |= 8;
fp[3] = CheckFloat(key);
break;
case NAME_ceilingplane_a:
cplaneflags |= 1;
cp[0] = CheckFloat(key);
break;
case NAME_ceilingplane_b:
cplaneflags |= 2;
cp[1] = CheckFloat(key);
break;
case NAME_ceilingplane_c:
cplaneflags |= 4;
cp[2] = CheckFloat(key);
break;
case NAME_ceilingplane_d:
cplaneflags |= 8;
cp[3] = CheckFloat(key);
break;
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
default:
break;
}
if (!strnicmp("user_", key.GetChars(), 5))
{
AddUserKey(key, UDMF_Sector, index);
}
}
- fixed: WIF_STAFF2_KICKBACK did not work anymore because it depended on conditions that were changed some time ago. - fixed: The damage inflictor for a rail attack was the shooter, not the puff. - Fixed: Floor and ceiling huggers may not change their z-velocity when seeking. - Fixed: UDMF set the secret sector flag before parsing the sector's properties, resulting in it always being false. - Renamed sector's oldspecial variable to secretsector to better reflect its only use. - Fixed: A_BrainSpit stored as the SpawnShot's target the intended BossTarget, not itself contrarily to other projectile spawning functions. A_SpawnFly then used the target for CopyFriendliness, thinking it'll be the BossEye when in fact it wasn't. - Added Gez's submission for a DEHACKED hack introduced by Boom. (using code pointers of the form 'Pointer 0 (x statenumber)'. - fixed: Attaching 3DMidtex lines by sector tag did not work because lines were marked by index in the sector's line list but needed to be marked by line index in the global array. - fixed: On Linux ZDoom was creating a directory called "~.zdoom" for save files because of a missing slash. - fixed: UDMF was unable to read floating point values in exponential format because the C Mode scanner was missing a definition for them. - fixed: The recent changes for removing pointer aliasing got the end sequence info from an incorrect variable. To make this more robust the sequence index is now stored as a hexadecimal string to avoid storing binary data in a string. Also moved end sequence lookup from f_finale.cpp to the calling code so that the proper end sequences can be retrieved for secret exits, too. SVN r1777 (trunk)
2009-08-30 10:43:51 +00:00
sec->secretsector = !!(sec->special&SECRET_MASK);
// Reset the planes to their defaults if not all of the plane equation's parameters were found.
if (fplaneflags != 15)
{
sec->floorplane.a = sec->floorplane.b = 0;
sec->floorplane.d = -sec->GetPlaneTexZ(sector_t::floor);
sec->floorplane.c = FRACUNIT;
sec->floorplane.ic = FRACUNIT;
}
else
{
double ulen = TVector3<double>(fp[0], fp[1], fp[2]).Length();
// normalize the vector, it must have a length of 1
sec->floorplane.a = FLOAT2FIXED(fp[0] / ulen);
sec->floorplane.b = FLOAT2FIXED(fp[1] / ulen);
sec->floorplane.c = FLOAT2FIXED(fp[2] / ulen);
sec->floorplane.d = FLOAT2FIXED(fp[3] / ulen);
sec->floorplane.ic = FLOAT2FIXED(ulen / fp[2]);
}
if (cplaneflags != 15)
{
sec->ceilingplane.a = sec->ceilingplane.b = 0;
sec->ceilingplane.d = sec->GetPlaneTexZ(sector_t::ceiling);
sec->ceilingplane.c = -FRACUNIT;
sec->ceilingplane.ic = -FRACUNIT;
}
else
{
double ulen = TVector3<double>(cp[0], cp[1], cp[2]).Length();
// normalize the vector, it must have a length of 1
sec->ceilingplane.a = FLOAT2FIXED(cp[0] / ulen);
sec->ceilingplane.b = FLOAT2FIXED(cp[1] / ulen);
sec->ceilingplane.c = FLOAT2FIXED(cp[2] / ulen);
sec->ceilingplane.d = FLOAT2FIXED(cp[3] / ulen);
sec->ceilingplane.ic = FLOAT2FIXED(ulen / cp[2]);
}
if (lightcolor == -1 && fadecolor == -1 && desaturation == -1)
{
// [RH] Sectors default to white light with the default fade.
// If they are outside (have a sky ceiling), they use the outside fog.
if (level.outsidefog != 0xff000000 && (sec->GetTexture(sector_t::ceiling) == skyflatnum || (sec->special&0xff) == Sector_Outside))
{
if (fogMap == NULL)
fogMap = GetSpecialLights (PalEntry (255,255,255), level.outsidefog, 0);
sec->ColorMap = fogMap;
}
else
{
if (normMap == NULL)
normMap = GetSpecialLights (PalEntry (255,255,255), level.fadeto, NormalLight.Desaturate);
sec->ColorMap = normMap;
}
}
else
{
if (lightcolor == -1) lightcolor = PalEntry(255,255,255);
if (fadecolor == -1)
{
if (level.outsidefog != 0xff000000 && (sec->GetTexture(sector_t::ceiling) == skyflatnum || (sec->special&0xff) == Sector_Outside))
fadecolor = level.outsidefog;
else
fadecolor = level.fadeto;
}
if (desaturation == -1) desaturation = NormalLight.Desaturate;
sec->ColorMap = GetSpecialLights (lightcolor, fadecolor, desaturation);
}
}
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
//===========================================================================
//
// parse a vertex block
//
//===========================================================================
void ParseVertex(vertex_t *vt, vertexdata_t *vd)
{
vt->x = vt->y = 0;
vd->zCeiling = vd->zFloor = vd->flags = 0;
sc.MustGetStringName("{");
while (!sc.CheckString("}"))
{
sc.MustGetString();
FName key = sc.String;
sc.MustGetStringName("=");
sc.MustGetString();
FString value = sc.String;
sc.MustGetStringName(";");
switch(key)
{
case NAME_X:
vt->x = FLOAT2FIXED(strtod(value, NULL));
break;
case NAME_Y:
vt->y = FLOAT2FIXED(strtod(value, NULL));
break;
case NAME_ZCeiling:
vd->zCeiling = FLOAT2FIXED(strtod(value, NULL));
vd->flags |= VERTEXFLAG_ZCeilingEnabled;
break;
case NAME_ZFloor:
vd->zFloor = FLOAT2FIXED(strtod(value, NULL));
vd->flags |= VERTEXFLAG_ZFloorEnabled;
break;
default:
break;
}
}
}
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
//===========================================================================
//
// Processes the linedefs after the map has been loaded
//
//===========================================================================
void ProcessLineDefs()
{
int sidecount = 0;
for(unsigned i = 0, skipped = 0; i < ParsedLines.Size();)
{
// Relocate the vertices
intptr_t v1i = intptr_t(ParsedLines[i].v1);
intptr_t v2i = intptr_t(ParsedLines[i].v2);
if (v1i >= numvertexes || v2i >= numvertexes || v1i < 0 || v2i < 0)
{
I_Error ("Line %d has invalid vertices: %zd and/or %zd.\nThe map only contains %d vertices.", i+skipped, v1i, v2i, numvertexes);
}
else if (v1i == v2i ||
(vertexes[v1i].x == vertexes[v2i].x && vertexes[v1i].y == vertexes[v2i].y))
{
Printf ("Removing 0-length line %d\n", i+skipped);
ParsedLines.Delete(i);
ForceNodeBuild = true;
skipped++;
}
else
{
ParsedLines[i].v1 = &vertexes[v1i];
ParsedLines[i].v2 = &vertexes[v2i];
if (ParsedLines[i].sidedef[0] != NULL)
sidecount++;
if (ParsedLines[i].sidedef[1] != NULL)
sidecount++;
linemap.Push(i+skipped);
i++;
}
}
numlines = ParsedLines.Size();
numsides = sidecount;
lines = new line_t[numlines];
sides = new side_t[numsides];
int line, side;
for(line = 0, side = 0; line < numlines; line++)
{
short tempalpha[2] = { SHRT_MIN, SHRT_MIN };
lines[line] = ParsedLines[line];
for(int sd = 0; sd < 2; sd++)
{
if (lines[line].sidedef[sd] != NULL)
{
int mapside = int(intptr_t(lines[line].sidedef[sd]))-1;
if (mapside < sidecount)
{
sides[side] = ParsedSides[mapside];
sides[side].linedef = &lines[line];
sides[side].sector = &sectors[intptr_t(sides[side].sector)];
lines[line].sidedef[sd] = &sides[side];
P_ProcessSideTextures(!isExtended, &sides[side], sides[side].sector, &ParsedSideTextures[mapside],
lines[line].special, lines[line].args[0], &tempalpha[sd], missingTex);
side++;
}
else
{
lines[line].sidedef[sd] = NULL;
}
}
}
P_AdjustLine(&lines[line]);
P_FinishLoadingLineDef(&lines[line], tempalpha[0]);
}
assert(side <= numsides);
if (side < numsides)
{
Printf("Map had %d invalid side references\n", numsides - side);
numsides = side;
}
}
- Changed: The texture loader now looks for a TEXTURES lump for text based texture definitions. HIRESTEX is still supported but deprecated. - Removed all 16 bit values from texture manager. - Changed: The texture manager now sorts all textures for a WAD by type to avoid priority issues with HIRESTEX defined textures. - Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is always the same for both sides of a linedef. This also makes handling this in the UDMF parser easier because the linedef parsing function does not need to access the sidedef data. - Added new ZDoom specific UDMF linedef and sidedef properties to map parser. - Added new ZDoom specific UDMF sector properties to map parser. - Added class definitions for new interpolators that are better equipped to interact with the interpolated objects. - Separated interpolation code into its own file r_interpolate.cpp. - Added some simple customization options to the end game screens. - Fixed: Polyobject detection in the internal node builder did not work anymore due to some code rearrangement for UDMF map loading. To keep it compatible between all map formats the THINGS lump of binary format maps must be loaded before building the nodes. This also means that the spawning itself can be done in the same function for all map types (except Build) now. - Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse which is more what would be expected from this option. - Fixed: Weapons and ammo items that were modified by Dehacked gave full ammo when being dropped by monsters. To properly handle this the handling of spawning Dehacked modified pickups was changed to use the DECORATE replacement feature instead of hacking the spawn state of the original item and calling a spawn function from there. SVN r1001 (trunk)
2008-05-30 06:56:50 +00:00
//===========================================================================
//
// Main parsing function
//
//===========================================================================
void ParseTextMap(MapData *map)
{
char *buffer = new char[map->Size(ML_TEXTMAP)];
isTranslated = true;
isExtended = false;
floordrop = false;
map->Read(ML_TEXTMAP, buffer);
sc.OpenMem(Wads.GetLumpFullName(map->lumpnum), buffer, map->Size(ML_TEXTMAP));
delete [] buffer;
sc.SetCMode(true);
if (sc.CheckString("namespace"))
{
sc.MustGetStringName("=");
sc.MustGetString();
namespc = sc.String;
switch(namespc)
{
case NAME_ZDoom:
namespace_bits = Zd;
isTranslated = false;
break;
case NAME_ZDoomTranslated:
level.flags2 |= LEVEL2_DUMMYSWITCHES;
namespace_bits = Zdt;
break;
case NAME_Vavoom:
namespace_bits = Va;
isTranslated = false;
break;
case NAME_Hexen:
namespace_bits = Hx;
isTranslated = false;
break;
case NAME_Doom:
namespace_bits = Dm;
P_LoadTranslator("xlat/doom_base.txt");
level.flags2 |= LEVEL2_DUMMYSWITCHES;
floordrop = true;
break;
case NAME_Heretic:
namespace_bits = Ht;
P_LoadTranslator("xlat/heretic_base.txt");
level.flags2 |= LEVEL2_DUMMYSWITCHES;
floordrop = true;
break;
case NAME_Strife:
namespace_bits = St;
P_LoadTranslator("xlat/strife_base.txt");
level.flags2 |= LEVEL2_DUMMYSWITCHES|LEVEL2_RAILINGHACK;
floordrop = true;
break;
default:
Printf("Unknown namespace %s. Using defaults for %s\n", sc.String, GameTypeName());
switch (gameinfo.gametype)
{
default: // Shh, GCC
case GAME_Doom:
case GAME_Chex:
namespace_bits = Dm;
P_LoadTranslator("xlat/doom_base.txt");
break;
case GAME_Heretic:
namespace_bits = Ht;
P_LoadTranslator("xlat/heretic_base.txt");
break;
case GAME_Strife:
namespace_bits = St;
P_LoadTranslator("xlat/strife_base.txt");
break;
case GAME_Hexen:
namespace_bits = Hx;
isTranslated = false;
break;
}
}
sc.MustGetStringName(";");
}
else
{
Printf("Map does not define a namespace.\n");
}
while (sc.GetString())
{
if (sc.Compare("thing"))
{
FMapThing th;
unsigned userdatastart = MapThingsUserData.Size();
ParseThing(&th);
MapThingsConverted.Push(th);
if (userdatastart < MapThingsUserData.Size())
{ // User data added
MapThingsUserDataIndex[MapThingsConverted.Size()-1] = userdatastart;
// Mark end of the user data for this map thing
FMapThingUserData ud;
ud.Property = NAME_None;
ud.Value = 0;
MapThingsUserData.Push(ud);
}
}
else if (sc.Compare("linedef"))
{
line_t li;
ParseLinedef(&li, ParsedLines.Size());
ParsedLines.Push(li);
}
else if (sc.Compare("sidedef"))
{
side_t si;
intmapsidedef_t st;
ParseSidedef(&si, &st, ParsedSides.Size());
ParsedSides.Push(si);
ParsedSideTextures.Push(st);
}
else if (sc.Compare("sector"))
{
sector_t sec;
ParseSector(&sec, ParsedSectors.Size());
ParsedSectors.Push(sec);
}
else if (sc.Compare("vertex"))
{
vertex_t vt;
vertexdata_t vd;
ParseVertex(&vt, &vd);
ParsedVertices.Push(vt);
ParsedVertexDatas.Push(vd);
}
else
{
Skip();
}
}
// Catch bogus maps here rather than during nodebuilding
if (ParsedVertices.Size() == 0) I_Error("Map has no vertices.\n");
if (ParsedSectors.Size() == 0) I_Error("Map has no sectors. \n");
if (ParsedLines.Size() == 0) I_Error("Map has no linedefs.\n");
if (ParsedSides.Size() == 0) I_Error("Map has no sidedefs.\n");
// Create the real vertices
numvertexes = ParsedVertices.Size();
vertexes = new vertex_t[numvertexes];
memcpy(vertexes, &ParsedVertices[0], numvertexes * sizeof(*vertexes));
// Create the real vertex datas
numvertexdatas = ParsedVertexDatas.Size();
vertexdatas = new vertexdata_t[numvertexdatas];
memcpy(vertexdatas, &ParsedVertexDatas[0], numvertexdatas * sizeof(*vertexdatas));
// Create the real sectors
numsectors = ParsedSectors.Size();
sectors = new sector_t[numsectors];
memcpy(sectors, &ParsedSectors[0], numsectors * sizeof(*sectors));
sectors[0].e = new extsector_t[numsectors];
for(int i = 0; i < numsectors; i++)
{
sectors[i].e = &sectors[0].e[i];
}
// Create the real linedefs and decompress the sidedefs
ProcessLineDefs();
}
};
void P_ParseTextMap(MapData *map, FMissingTextureTracker &missingtex)
{
UDMFParser parse(missingtex);
parse.ParseTextMap(map);
}