- all 5 settings affected by uiscale have been changed to have the exact same semantics: -1, if supported means special scaling, this is available for HUD and status bar, 0 means to use uiscale, any larger value is a direct scaling factor.
- scaling is cut off when the factor is larger than screenwidth/320 or screenheight/200 because anything larger will definitely not fit.
- a lot of code has been cleaned up and consolidated. Especially the message code had an incredible amount of redundancy.
- all scaling options have been moved into a submenu. This menu is not complete, though - it still requires a special menu widget to convey the intended information without confusing the user.
Needless to say, this is simply too volatile and would require constant active maintenance, not to mention a huge amount of work up front to get going.
It also hid a nasty problem with the Destroy method. Due to the way the garbage collector works, Destroy cannot be exposed to scripts as-is. It may be called from scripts but it may not be overridden from scripts because the garbage collector can call this function after all data needed for calling a scripted override has already been destroyed because if that data is also being collected there is no guarantee that proper order of destruction is observed. So for now Destroy is just a normal native method to scripted classes
- fixed a few errors in the ACS module serializer.
- reordered a few things to how they were in the old code.
- optimized serialization of the level.Scrolls array to happen within the sector. This is to allow skipping 0-entries which normally constitute the vast majority of them.
and two new functions, both of which are intended for use in conjunction with SetHUDSize:
* SetHUDClipRect(x, y, width, height[, wrapwidth]) - Set the clipping rectangle for future
HUD messages. If you do not specify <wrapwidth>, the HUD message will be layed out as
normal, but pixels outside the rectangle will not be drawn. If you specify <wrapwidth>,
then the message will be wrapped to that width. Use SetHUDClipRect(0, 0, 0, 0[, 0]) to
reset everything
back to normal.
* SetHUDWrapWidth(wrapwidth) - Sets the wrapping width for future HUD messages without
altering the clipping rectangle. If you set the wrapping width to 0, messages will wrap
to the full width of the HUD, as normal.
* HUDMSG_NOWRAP - A HUDMessage() flag that disables wrapping for one message. It is
functionally equivalent to SetHUDWrapWidth(0x7FFFFFFF), except that it only affects the
message it's attached to.
SVN r3960 (trunk)
* HUDMSG_NOTWITH3DVIEW : This message does not appear when the 3D view is active.
* HUDMSG_NOTWITHFULLMAP : This message does not appear when the fullscreen automap is active.
* HUDMSG_NOTWITHOVERLAYMAP : This message does not appear when the overlay automap is active.
These flags may be combined, so for example: HUDMSG_NOTWITHFULLMAP | HUDMSG_NOTWITHOVERLAYMAP
would prevent the message from appearing if any form of automap is active.
- Added HUD message layers, which are ORed into the type field:
* HUDMSG_LAYER_OVERHUD : This is the default and standard behavior. The message appear on
top of most HUD elements. This definition is just included for completeness' sake; you
don't need to explicitly use it.
* HUDMSG_LAYER_UNDERHUD : The message appears underneath other HUD elements, such as the status bar.
* HUDMSG_LAYER_OVERMAP : The message appears on top of the fullscreen automap. At the moment,
this layer is functionally equivalent to using the flags HUDMSG_NOTWITH3DVIEW | HUDMSG_NOTWITHOVERLAYMAP.
However, if Blzut3 decides to implement support for drawing the automap permanently on a
second screen, messages on this layer will move to that screen with the automap and be permanently
visible as long as the map is visible on that other screen.
These are not flags, so for example HUDMSG_LAYER_UNDERHUD | HUDMSG_LAYER_OVERHUD is not valid.
SVN r3821 (trunk)
DHUDMessageFadeOut::Tick() starts counting from the time the last line was fully displayed, not
from the time its first character was displayed.
SVN r3665 (trunk)
- Changed WI_drawPercent() when wi_percents is false so that the total
display is optional, and it formats it like Heretic's intermission, with
a slash and a fixed-width right column.
- Font is no longer a property of the screen object. Pass the font to
DrawText and DrawChar directly instead.
- Doom's intermission characters are now collected together as a font
so they can be colorized.
SVN r1294 (trunk)
- If you aren't targeting x86, m_fixed.h only includes basicinlines.h now.
- Moved x64inlines.h into basicinlines.h.
- Replaced uses of __int64 with types from doomtype.h.
- The stop console command no longer ends single player games, just the demo
that was being recorded.
- In C mode, the sc_man parser no longer allows multi-line string constants
without using the \ character to preface the newline character. This makes
it much easier to diagnose errors where you forget the closing quote of a
string.
- Fixed: V_BreakLines() added the terminating '\0' to the last line of the
input string.
- Added font as a parameter to V_BreakLines and removed its keepspace
parameter, which was never passed as anything other than the default.
SVN r331 (trunk)
- The stat meters now return an FString instead of sprintfing into a fixed
output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
- For consistancy with the other integral types, byte is no longer a
synonym for BYTE.
- Most uses of BOOL have been change to the standard C++ bool type. Those
that weren't were changed to INTBOOL to indicate they may contain values
other than 0 or 1 but are still used as a boolean.
- Compiler-provided types with explicit bit sizes are now used. In
particular, DWORD is no longer a long so it will work with both 64-bit
Windows and Linux.
- Since some files need to include Windows headers, uint32 is a synonym
for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
was all it contained.
SVN r326 (trunk)
yanking the mouse around if they keys haven't been read yet to combat the
same situation that causes the keyboard to return DIERR_NOTACQUIRED in
KeyRead(): The window is sort of in focus and sort of not. User.dll
considers it to be focused and it's drawn as such, but another focused
window is on top of it, and DirectInput doesn't see it as focused.
- Fixed: KeyRead() should handle DIERR_NOTACQUIRED errors the same way it
handles DIERR_INPUTLOST errors. This can happen if our window had the
focus stolen away from it before we tried to acquire the keyboard in
DI_Init2(). Strangely, MouseRead_DI() already did this.
- When a stack overflow occurs, report.txt now only includes the first and
last 16KB of the stack to make it more manageable.
- Limited StreamEditBinary() to the first 64KB of the file to keep it from
taking too long on large dumps.
- And now I know why gathering crash information in the same process that
crashed can be bad: Stack overflows. You get one spare page to play with
when the stack overflows. MiniDumpWriteDump() needs more than that and
causes an access violation when it runs out of leftover stack, silently
terminating the application. Windows XP x64 offers SetThreadStackGuarantee()
to increase this, but that isn't available on anything older, including
32-bit XP. To get around this, a new thread is created to write the mini
dump when the stack overflows.
- Changed A_Burnination() to be closer to Strife's.
- Fixed: When playing back demos, DoAddBot() can be called without an
associated call to SpawnBot(). So if the bot can't spawn, botnum can
go negative, which will cause problems later in DCajunMaster::Main()
when it sees that wanted_botnum (0) is higher than botnum (-1).
- Fixed: Stopping demo recording in multiplayer games should not abruptly
drop the recorder out of the game without notifying the other players.
In fact, there's no reason why it should drop them out of multiplayer at
all.
- Fixed: Earthquakes were unreliable in multiplayer games because
P_PredictPlayer() did not preserve the player's xviewshift.
- Fixed: PlayerIsGone() needs to stop any scripts that belong to the player
who left, in addition to executing disconnect scripts.
- Fixed: APlayerPawn::AddInventory() should also check for a NULL player->mo
in case the player left but somebody still has a reference to their actor.
- Fixed: DDrawFB::PaintToWindow() should simulate proper unlocking behavior
and set Buffer to NULL.
- Improved feedback for network game initialization with the console ticker.
- Moved i_net.cpp and i_net.h out of sdl/ and win32/ and into the main source
directory. They are identical, so keeping two copies of them is bad.
- Fixed: (At least with Creative's driver's,) EAX settings are global and not
per-application. So if you play a multiplayer ZDoom game on one computer
(or even another EAX-using application), ZDoom needs to restore the
environment when it regains focus.
- Maybe fixed: (See http://forum.zdoom.org/potato.php?t=10689) Apparently,
PacketGet can receive ECONNRESET from nodes that aren't in the game. It
should be safe to just ignore these packets.
- Fixed: PlayerIsGone() should set the gone player's camera to NULL in case
the player who left was player 0. This is because if a remaining player
receives a "recoverable" error, they will become player 0. Once that happens,
they game will try to update sounds through their camera and crash in
FMODSoundRenderer::UpdateListener() because the zones array is now NULL.
G_NewInit() should also clear all the player structures.
SVN r233 (trunk)