Bill Currie
c4d7b65a05
Much diff noise reduction in V_CalcRefdef.
...
NQ's client-side onground now works similarly to QW's: -1 = not on ground,
0+ = on ground (plane num?) but only 0 is used in NQ as the necessary
information is not sent over the network.
2012-06-15 22:02:17 +09:00
Bill Currie
86ecab4ff7
"Merge" V_ParseDamage
2012-06-15 22:02:16 +09:00
Bill Currie
7dd400d04a
"Merge" V_CalcRoll.
2012-06-15 22:02:16 +09:00
Bill Currie
301a6431c6
Correct a comment, and more diff reduction.
...
It turns out NQ "never" sent coordinats at 1/16 resolution: even q1source
sends coords at 1/8 resolution. This gets rid of an annoying difference.
2012-06-15 22:02:16 +09:00
Bill Currie
5bae5b3740
Much diff noise reduction.
2012-06-15 22:02:16 +09:00
Bill Currie
81dc750857
Pretend to allow screen offsets.
...
Because qw's maxclients is always > 1, they'll never work, though :)
2012-06-15 22:02:16 +09:00
Bill Currie
e6ce44fde7
Change qw's punchangle to a vector.
...
Consistency with nq :) (however, only pitch works in qw).
2012-06-15 22:02:16 +09:00
Bill Currie
d561d5587d
Move the simangles hack out of cl_view.
...
The places that will need to be fixed are now three, but cl_view.c now
doesn't mess with values it shouldn't alter.
2012-06-15 22:02:16 +09:00
Bill Currie
42256021fc
Fix nq's idle swaying to match qw's.
...
In nq, the gun would sway strangly relative to the player's view, but in
qw, the gun is fixed. Now it is in both.
2012-06-15 22:02:15 +09:00
Bill Currie
a49c123d84
Shuffle some fields around in cient_state_t.
2012-06-15 22:02:15 +09:00
Bill Currie
83d6dd7262
Fix idealpitch and viewheight in qw.
...
For certain values of "fix" ;). Both are brought back to life but
idealpitch is never set (always 0) and veiwheight is set in V_RenderView().
However, this brings the rest of the code in cl_view.c just that little bit
closer to merged :)
2012-06-15 22:02:15 +09:00
Bill Currie
3fd279ea6c
Use info strings for scoreboard names in nq.
...
Nukes a strcpy and a buffer, and is one step closer to merged client data.
2012-06-15 22:02:15 +09:00
Bill Currie
bf751cafe0
Split nq's colors into topcolor/bottomcolor.
...
The protocol is not affected: the incoming colors byte is split into the
two fields when read from the packet. This simplifies a lot of code
elsewhere.
2012-06-15 22:02:15 +09:00
Bill Currie
afec630d1a
Nuke some obsolete fields.
...
scoreboard_t and player_info_t haven't used the
_color/_topcolor/_bottomcolor fields for a while (since glsl).
2012-06-15 22:02:15 +09:00
Bill Currie
fd78d900e9
Complete all stuff commands when getting server info/data.
...
When the stufftext buffering was implemented, we forgot about
svc_serverdata...
While nq might normally not have the issue, I thought it best to implement
in nq, too.
2012-06-15 22:02:15 +09:00
Bill Currie
28d16b6f57
Implement qw's safe stufftext buffering in nq.
...
Avoid stuffing incomplete commands.
2012-06-15 22:02:14 +09:00
Bill Currie
17b43ba736
Clean up svc_disconnect differences.
...
Now that nq has distinct ca_active and ca_connected, this will work :)
2012-06-15 22:02:14 +09:00
Bill Currie
e730608dd7
Implement r_flatlightstyles from fitzquake.
2012-06-15 22:02:14 +09:00
Bill Currie
7299ca7bec
More cl_parse tidyup.
...
svcs are now in order: makes it even easier to see what's different between
nq and qw.
2012-06-15 22:02:14 +09:00
Bill Currie
476ad75724
Add a fixme to remove skin from qw's entity_state_t.
2012-06-15 22:02:14 +09:00
Bill Currie
9c440ad9e2
Rename entity_state_t's skln to skinnum in nq.
...
Also some whitespace and comment corrections.
2012-06-15 22:02:14 +09:00
Bill Currie
25cb618e4d
Clean up client_static_t a little more.
2012-06-15 22:02:13 +09:00
Bill Currie
b20daaf611
Nuke mapstring and spawnparms from client_static_t.
...
They're completely useless. Even though spawnparms was sent over the
network, the server ignored it. mapstring was never read anywhere.
2012-06-15 22:02:13 +09:00
Bill Currie
1aa2c22169
Nuke MAX_SCOREBOARDNAME from qw.
...
It was different from nq's MAX_SCOREBOARDNAME, and not really necessary,
what with being able to uuse info_key_t caches.
2012-06-15 22:02:13 +09:00
Bill Currie
b4ad695e16
Make info_t opaque.
...
I didn't like the way client/server code was poking around at the
implementation. Instead, provide a couple of accessor functions for the
same information.
2012-06-14 22:46:23 +09:00
Bill Currie
da8355a5f6
Remove some commented code.
2012-06-14 22:45:59 +09:00
Bill Currie
65bb35509f
Rearrange the offset cheat prevention.
...
Rather than (expensively) setting the cvars to 0 every frame, just ignore
their values in multiplayer mode.
2012-06-14 22:45:40 +09:00
Bill Currie
e7c3ae911f
Clean up some diff noise.
2012-06-14 22:45:24 +09:00
Bill Currie
96785ccec7
Clean up chase/spectator camera stuff.
...
o Rename nq's cl_cam.c to cl_chase.c.
o Split out the chase cam stuff from qw's cl_cam.c to cl_chase.c
2012-06-14 22:45:05 +09:00
Bill Currie
ac1bf2a158
Don't save unnamed fields.
...
There will normally be only one unnamed field (if any), and it's always the
null field. This will put an eventual end to the "'' is not a field"
messages.
2012-06-10 20:56:22 +09:00
Bill Currie
cf2377e76f
Fix view angles when loading saved games.
...
As per mh's post on inside3d.com.
2012-06-10 16:50:35 +09:00
Bill Currie
2dfa871794
Try mvd before qwd when no extension is given.
2012-06-03 20:12:34 +09:00
Bill Currie
93e35d7ec0
Add demo format auto-detection.
...
nq now rejects anything that doesn't look like a .dem, and qw not only
rejects anything that looks like neither a .qwd nor a .mvd, but even
detects which one is being played by the contents rather than the file name
(foo.mvd.gz would be mis-detected as a qwd!!).
2012-06-03 20:04:02 +09:00
Bill Currie
dfc8f8bb20
Minor cleanup of CL_Record() and give nq default demo names.
2012-06-03 20:03:43 +09:00
Bill Currie
82a41017ec
Create a proper ca_active state.
...
Yay, no more ugly "SIGNONS" hack for whether to render :)
2012-06-03 20:01:42 +09:00
Bill Currie
7d84800250
Remove an unnecessary if.
...
It needed during initial development of the patch, but with the refactoring
of s_init, it became redundant.
2012-05-28 07:58:11 +09:00
Bill Currie
01fb4f265d
Attempt to reconnect to jack on loss of connection.
2012-05-28 07:46:22 +09:00
Bill Currie
dbc203b625
And a few more bits of whitespace.
2012-05-23 08:21:27 +09:00
Bill Currie
23a38738fc
Massive whitespace cleanup.
...
Lots of trailing whitespace and otherwise blank lines.
2012-05-22 08:23:22 +09:00
Bill Currie
01773c7cd3
Fix the infinite think loop when playing honey.
...
The change to nq SV_RunThink to match that in qw finally bit my bum. I
suspect it's really a bug in the honey progs (using ltime on a non-pusher),
but QF locking up is not very friendly. I want to keep the option of having
a think loop in the same frame for progs that expect it (using
self.nextthink = time), but also NQ's original method of running think
every frame. Hopefully no progs expect "self.nextthink = time" to run
every frame rather than loop within the current frame.
2012-05-20 22:45:30 +09:00
Bill Currie
85da69a96a
Transform normals wrt bones in sw and sw32.
...
Better lighting :), though any scaling/shearing will produce funny results,
and sw32's lighting is broken in general.
2012-05-20 15:21:25 +09:00
Bill Currie
b5add680f7
Add Mat4as3MultVec.
...
to transform a vertex without the translation (eg, for normals) without
having to have separate matrices.
2012-05-20 15:20:18 +09:00
Bill Currie
0fbaa2a88a
Add sw32 support for iqm models.
...
That was easy :)
2012-05-20 14:23:41 +09:00
Bill Currie
3087e685cc
Convert texcoords to fixed point.
...
Bah, another weekend wasted on an oversight :( However, Mr. Fixit looks
quite alright in the quake palette.
2012-05-20 10:02:44 +09:00
Bill Currie
f0285e5a08
Correct the texcoord conversion.
...
1.0 is to represent the last pixel, not one past it.
2012-05-20 08:51:15 +09:00
Bill Currie
e2db2dcb63
Support static iqm models.
...
Segging on a model with no animations is not nice :P
2012-05-19 21:26:11 +09:00
Bill Currie
6ace105e31
Fix some macro parenthesis issues.
2012-05-19 21:25:58 +09:00
Bill Currie
d25f39cc7d
Remove pskindesc from affinetridesc_t.
...
It's never used after being set.
2012-05-19 09:29:05 +09:00
Bill Currie
c1eb3e77c3
Process each vertex texcoord only once.
...
Double converting texcoords results in 0,0 for all affected texcoords. Mr
Fixit was looking rather ill. Now he looks weird (something wrong in the
renderer?).
2012-05-19 09:15:26 +09:00
Bill Currie
d41bf32d91
Hopefully fix color conversion.
...
Hard to tell because the triangle rendering is still messed up. However,
storing negative values in bytes doesn't work :)
2012-05-19 09:14:07 +09:00