Multiple render passes are needed for supporting shadow mapping, and
this is a huge step towards breaking the Vulkan render free of Quake,
and hopefully will lead the way for breaking the GL renderers free as
well.
This is actually a better solution to the renderer directly accessing
client code than provided by 7e078c7f9c.
Essentially, V_RenderView should not have been calling R_RenderView, and
CL_UpdateScreen should have been calling V_RenderView directly. The
issue was that the renderers expected the world entity model to be valid
at all times. Now, R_RenderView checks the world entity model's validity
and immediately bails if it is not, and R_ClearState (which is called
whenever the client disconnects and thus no longer has a world to
render) clears the world entity model. Thus R_RenderView can (and is)
now called unconditionally from within the renderer, simplifying
renderer-specific variants.
The generated short names for a lot of Vulkan enums start with a number
(eg VK_IMAGE_TYPE_2D -> 2d). Having to prefix the short name with ` is a
tiny cost for the convenience.
While using binary data objects for specialization data works for bools
(as they can be 0 or -1), they don't work so well for numeric values due
to having to get the byte order correct and thus are not portable, and
difficult to get right.
Binary data is still supported, but the data can be written as a string
with an array(...) "constructor" expression taking any number of
parameters, with each parameter itself being an expression (though
values are limited at this stage).
Due to the plist format, quotes are required around the expression
("array(...)")
While there may be better solutions, I needed a varargs function for
building Vulkan specialization data. Like progs functions, negative
parameter counts indicate ellipsis with the number of fixed parameters
being equal to -param_count - 1.
Sets never shrink, so assigning a dynamically created set to a
statically created set after the working size has reduced (going from
demo2 to demo3) causes the set code to attempt to resize the statically
created set, which leads to libc having a bad time.
Why nvidia's drivers accepted double-destroyed framebuffers is beyond
me, but this fixes the Intel drivers complaining about such (and the
subsequent segfault).
When I changed the matrices from an array of floats to an array of
vec4f_t, I forgot to update the flush offsets. Yay for having a
Vulkan-capable Intel device with its different alignment requirements.
When allocating memory for multiple objects that have alignment
requirements, it gets tedious keeping track of the offset and the
alignment. This is a simple function for walking the offset respecting
size and alignment requirements, and doubles as a size calculator.
IN_ButtonAction treats id 0 as not pressed in its internal processing,
and the previous input implementation treated 0 as "no key", so this is
both the simplest and most correct fix.
Fixes mouse left button not working every second time the game is run
(due to keyboard and mouse bindings swapping places in the config file
(separate issue, if it really is one)).
I'm not sure what I was thinking when I made PL_RemoveObjectForKey take
a const plitem. One of those times where C could do with being a little
more strict.
I think this bug has been haunting us since we introduced lerping. I do
remember chasing bad pose indices 20 years ago and never finding the
cause. I guess we never thought to check the view model.
I don't know if cygwin itself is even relevant these days, but any of
our docs for it are way out of date anyway. Also, as github takes any
old readme as the repository documentation, it's not the best candidate.
While using barriers is a zillion times better than actually grabbing
the mouse and keyboard, they're still a pain when debugging as qf is not
able to respond to the barrier-hit events. All the other logic is still
there so even when "grabbing", the mouse will not be blocked if the
window doesn't have focus.
The stack is arbitrary strings that the validation layer debug callback
prints in reverse order after each message. This makes it easy to work
out what nodes in a pipeline/render pass plist are causing validation
errors. Still have to narrow down the actual line, but the messages seem
to help with that.
Putting qfvPushDebug/qfvPopDebug around other calls to vulkan should
help out a lot, tool.
As a bonus, the stack is printed before debug_breakpoint is called, so
it's immediately visible in gdb.
Rather than just 0/1, it now acts as flags to control what messages are
printed. In addition to the Vulkan enum names (long and short), none and
all are supported (as well as raw numbers, but they're not checked for
validity). This makes vulkan_use_validation a bit easier to use and less
verbose by default.
Now, if only it was easier to remember the name :P
Id's binding of escape to togglemenu interfered with the hard-coding
(want escape to togglemenu (or console as a fallback) no matter what).
This idea was part of mercury's original design, too.
I'm not at all happy with con_message and con_menu, but fixing them
properly will take a rework of the menus (planned, though). Also, the
Menu_ console command implementations are a bit iffy and could also do
with a rewrite (probably part of the rest of the menu rework) or just
nuking (they were part of Johnny on Flame's work, so I suspect had
something to do with joystick bindings).
It seems X11 does not like creating barriers entirely off the screen,
though the error seems to be a little unreliable (however, off the left
edge was definitely bad).
An imt switcher automatically changes the context's active imt based on
a user specified list of binary inputs. The inputs may be either buttons
(indicated as +button) or cvars (bare name). For buttons, the
pressed/not pressed state is used, and cvars are interpreted as ints
being 0 or not 0. The order of the inputs determines the bit number of
the input, with the first input being bit 0, second bit 1, third bit 2
etc. A default imt is given so large switchers do not need to be fully
configured (the default imt is written to all states).
A context can have any number of switchers attached. The switchers can
wind up fighting over the active imt, but this seems to be something for
the "user" (eg, configuration system) to sort out rather than the
switcher code enforcing anything.
As a result of the inputs being treated as bits, a switcher with N
inputs will have 2**N states, thus there's a maximum of 16 inputs for
now as 65536 states is a lot of configuration.
Using a switcher, setting up a standard strafe/mouse look configuration
is fairly easy.
imt_create key_game imt_mod
imt_create key_game imt_mod_strafe imt_mod
imt_create key_game imt_mod_freelook
imt_create key_game imt_mod_lookstrafe imt_mod_freelook
imt_switcher_create mouse key_game imt_mod_strafe +strafe lookstrafe +mlook freelook
imt_switcher 0 imt_mod 2 imt_mod 4 imt_mod_freelook 8 imt_mod_freelook 12 imt_mod_freelook
imt_switcher 6 imt_mod_lookstrafe 10 imt_mod_lookstrafe 14 imt_mod_lookstrafe
in_bind imt_mod mouse axis 0 move.yaw
in_bind imt_mod mouse axis 1 move.forward
in_bind imt_mod_strafe mouse axis 0 move.side
in_bind imt_mod_lookstrafe mouse axis 0 move.side
in_bind imt_mod_freelook mouse axis 1 move.pitch
This takes advantage of imt chaining and the default imt for the
switcher (there are 8 states that use imt_mod_strafe).
The switcher name must be unique across all contexts, and every imt used
in a switcher must be in the switcher's context.
The listener is invoked when the axis value changes due to IN_UpdateAxis
or IN_ClampAxis updating the axis. This does mean the listener
invocation make be somewhat delayed. I am a tad uncertain about this
design thus it being a separate commit.
Listeners are separate to the main callback as listeners have only
read-only access to the objects, but the main callback is free to modify
the cvar and thus can act as a parser and validator. The listeners are
invoked after the main callback if the cvar is modified. There does not
need to be a main callback for the listeners to be invoked.
