Inspired by
http://forums.duke4.net/topic/7506-tror-question/page__view__findpost__p__199151
the corruption checker now checks for certain conditions of the loops of each
sector. Recall that CW loops are outer and CCW loops are inner.
- If a sector has no or more than one outer loop, count that as corruption
(level 4 and 3, respectively).
- (Disabled) For sectors with exactly one outer loop, check that all inner
ones are inside it. This is currently not compiled due to an asymmetry of
loopinside() for degenerate cases, similar to pre-r3898 inside().
git-svn-id: https://svn.eduke32.com/eduke32@4569 1a8010ca-5511-0410-912e-c29ae57300e0
One potential use is to add r_togglecomposition "0" if you don't like Aero turning on and off every time you switch between 2D mode and 32-bit 3D mode.
git-svn-id: https://svn.eduke32.com/eduke32@4344 1a8010ca-5511-0410-912e-c29ae57300e0
Instead of directly in build.c:app_main(). Previously, it was possible that an
argument to an option, e.g. "WGR2" with "-game_dir WGR2", would get interpreted
as the initial map to load. This in turn would attempt to execute WGR2.cfg as
sequence of OSD commands -- where that file is an EDuke32 config file instead!
Now: maps are passed without any options, e.g. "mapster32 [opts...] debug.map".
The map file name is not added to the "additional parameters" for map testing.
git-svn-id: https://svn.eduke32.com/eduke32@4121 1a8010ca-5511-0410-912e-c29ae57300e0
Most often, this had happened when casting comparison functions for qsort()
like these: "int yax_cmpbunches(const int16_t *b1, const int16_t *b2)"
to a function pointer type expecting "const void *". Alas, this is undefined
behavior: see
http://blog.frama-c.com/index.php?post/2013/08/24/Function-pointers-in-C
and posts linked from it.
At least two cases have not been fixed:
- The savegame system maintains pointers which are either to data or a function in
the generic "void *". This ought to be made into a union.
- Probably also:
#define OSD_ALIAS (int32_t (*)(const osdfuncparm_t*))0x1337
git-svn-id: https://svn.eduke32.com/eduke32@4068 1a8010ca-5511-0410-912e-c29ae57300e0
Also, clean up the saving/loading logic a bit:
- On load failure, display message with purple color.
- Take over the current file name ('boardfilename') only on success.
- Check SaveBoard() return values in various places.
git-svn-id: https://svn.eduke32.com/eduke32@3911 1a8010ca-5511-0410-912e-c29ae57300e0
In 3D mode, Alt+F now only attempts to set the first wall of the aimed at
wall, not collecting upper/lower neighbors. For this, press Shift+Alt+F.
In 2D mode, they are always collected.
git-svn-id: https://svn.eduke32.com/eduke32@3825 1a8010ca-5511-0410-912e-c29ae57300e0
If m32script gamevar "move_by_one" is nonzero, the some keys move the
"player arrow" by increments of 1:
- Without SHIFT: LEFT/RIGHT absolute x, DOWN/UP absolute y, A/Z absolute z.
- With SHIFT: DOWN/UP (unbounded!) horiz, LEFT/RIGHT angle.
This can be useful to debug renderer bugs that show a high sensitivity to the
exact location ("are transient in space").
git-svn-id: https://svn.eduke32.com/eduke32@3509 1a8010ca-5511-0410-912e-c29ae57300e0
If enabled, dragging wall vertices will correct the xrepeat after the
mouse button is released, so that the pre-drag absolute stretching is
restored.
git-svn-id: https://svn.eduke32.com/eduke32@3398 1a8010ca-5511-0410-912e-c29ae57300e0
Also, add another flag, signifying that from the editor, also the
"lastwall"s (i.e. the CCW-linked points) should get collected. This is
to signal the editor that their wall lengths should be displayed, too.
git-svn-id: https://svn.eduke32.com/eduke32@3394 1a8010ca-5511-0410-912e-c29ae57300e0
- Rewrite the "clear background" routine in a no-brainer way instead of
juggling around with rotatesprite(). Make it common to game+editor.
Expose glRectd to glbuild.
- Don't stop OSD text line drawing when encountering a non-printable char.
Instead, treat it as space.
- In OSD_SetTextMode(), don't use swaplong (which really swaps 32-bit ints)
to swap pointers. Write an analogous "swapptr" instead.
- When changing from/to OSD, don't inject a pause key. This *might* have been
the cause of the reported pausing problems.
- clean up the code...
(Yes, this commit throws together too much stuff. I suck sometimes. :P)
git-svn-id: https://svn.eduke32.com/eduke32@3321 1a8010ca-5511-0410-912e-c29ae57300e0
This function also changed: it doesn't handle floor-aligned sprites now,
and the z offset is returned instead of set by pointer.
git-svn-id: https://svn.eduke32.com/eduke32@3205 1a8010ca-5511-0410-912e-c29ae57300e0
Credit to Plagman for the idea and doing the work on the game side, which is included in this commit.
(Building as C++ will give us features with which we can make improvements and optimizations on the multiplayer code and Polymer.)
git-svn-id: https://svn.eduke32.com/eduke32@3116 1a8010ca-5511-0410-912e-c29ae57300e0
This is done by pressing LShift and
- holding down the left mouse button for scaling, or
- the right mouse button for rotating the highlighted walls/sprites
with respect to a pivot point determined as the center of the bounding box of
all highlighted points.
Note that scaling sectors isn't that easy and the current functionality is very
rudimentary: there's no z scaling, no xrepeat correction, and sprites aren't
touched expect for their position. The user is responsible to maintain map
consistency, for example to prevent wall-lines of the same sector crossing
each other.
git-svn-id: https://svn.eduke32.com/eduke32@3113 1a8010ca-5511-0410-912e-c29ae57300e0
When LShift is pressed and the mouse is over a linking sprite (as determined by
the tag labeling system), lines are drawn to all other sprites, and pressing
[ or ] will cycle these then. False positives and missed sprites are possible.
Additional changes:
- consider SE 31 and 32's lotag to NOT be linking, since the ACTIVATOR is what
matters. The original maps are inconsistent there.
- When pressing Alt+[ or Alt+] and there are no corruptions, say so instead of
doing [ or ].
git-svn-id: https://svn.eduke32.com/eduke32@3108 1a8010ca-5511-0410-912e-c29ae57300e0
- make inside_editor() static in build.c
- replace comparisons of inside()'s return values with 0 by ones with 1
(since a returned 0 can mean -1 or 1, i.e. oob sector or is really inside)
- prevent a theoretically possible oob access in correct_ornamented_sprite()
git-svn-id: https://svn.eduke32.com/eduke32@3038 1a8010ca-5511-0410-912e-c29ae57300e0
Usage is from 3D mode only. When a sector (or wall) is committed to the
clipboard, it (or the wall's sector) is saved, and is subsequently used
when auto-aligning [;-ENTER] another sector's ceiling or floor against the
reference one's. This temp. sector is reset on any structurally modifying
operation except setting first walls; also, aligning extended ceilings or
floors is impossible as they use .*xrepeat internally.
The auto-alignment does not change picnums (this can be accomplished with
the ['+ENTER] combination), but copies the orientation bits 2^{2..6} to the
alignee. Afterwards, if the reference is relative-aligned, it tweaks them,
so that every case where the two firstwalls are either parallel or perpendi-
cular is handled correctly.
It does not yet calculate the panning values.
git-svn-id: https://svn.eduke32.com/eduke32@2715 1a8010ca-5511-0410-912e-c29ae57300e0
Note: You may encounter a crash if you try to test your map and Mapster32 is running fullscreen.
git-svn-id: https://svn.eduke32.com/eduke32@2684 1a8010ca-5511-0410-912e-c29ae57300e0
New engine variable 'int32_t Numsprites', not yet saved into savegames
or mapstates. (The capitalization is to distinguish it from the often-used
'numsprites' locals or structure member names.
In the editor, get rid of updatenumsprites().
git-svn-id: https://svn.eduke32.com/eduke32@2478 1a8010ca-5511-0410-912e-c29ae57300e0
The reason was that drawmasks(), which was where the resetting of the fake
RoR textures happened under Polymer, can be called from polymer_displayrooms()
when mirrors are present. I was assuming that drawmasks() was only ever called
after the 'main' drawrooms and that hence the sequence of fake RoR tile tweaking
was set, reset, set, reset, ... which it was not.
Now, do the resetting explicitly after every drawmasks() in the editor.
git-svn-id: https://svn.eduke32.com/eduke32@2350 1a8010ca-5511-0410-912e-c29ae57300e0
- 'whitecol' was defined in the engine and in build.c, use only the engine one
- make cachesize, artsize, artversion static in engine.c
- undo some formatting havoc presumably done by astyle
git-svn-id: https://svn.eduke32.com/eduke32@2260 1a8010ca-5511-0410-912e-c29ae57300e0
The cause was a combination of many factors. First, Polymer requires the
start-drawing position to be inside the sector to draw (deviations lead to
incorrect drawing). This was violated by the game, because it interpolated
the current and next tic position without updating the sectnum, leading to
inconsistencies especially when passing through narrow sectors. Polymer
worked around it by doing an updatesector() each frame, however this works
poorly for maps with overlapping geometry such as SoS or RoR.
The solution to this is to add a new engine function,
updatesector_onlynextwalls(), which searches the sectors (via nextsector)
in breadth-first fashion instead of from 0 to numsectors-1, like updatesector
does when it fails for the *immediate* nextwall neighbors.
Internally, the breadt-first search helpers are moved into the engine.
git-svn-id: https://svn.eduke32.com/eduke32@2256 1a8010ca-5511-0410-912e-c29ae57300e0
of SPACE and C when in side-view mode. Now, this is accomplished by checking
directly in the overheadeditor code.
git-svn-id: https://svn.eduke32.com/eduke32@2119 1a8010ca-5511-0410-912e-c29ae57300e0
- new mapster32.cfg and OSD variable 'fixmaponsave_sprites', telling the
editor whether to 'fix' the sprite sectnums on saving and entering 3D
mode. Note that a) sprite sectnums are never fixed when 'script_expertmode'
is enabled, as before, and b) sprites that have out-of-bounds sectnums
are still fixed if a proper sector is found
- if saving and some sprite sectnums have thus been tweaked, inform the
mapper on the status line and print the changes in the OSD
- fix update issue similar to an earlier one: when 'saving as', the astub.c-
based file name is now updated too, so saving with Ctrl-S now saves into
the one save with 'save as' (and not the old one)
- don't attempt to recheck wall pointers from scratch (when saving and running
with -check) if it's a TROR map
git-svn-id: https://svn.eduke32.com/eduke32@2110 1a8010ca-5511-0410-912e-c29ae57300e0
before, and additionally a mode that doesn't clip against masked walls
and sprites.
git-svn-id: https://svn.eduke32.com/eduke32@2028 1a8010ca-5511-0410-912e-c29ae57300e0
is to remove a couple of 'inline's for functions with external linkage, which
seems to be a GCC convenience.
git-svn-id: https://svn.eduke32.com/eduke32@2008 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the latter also correct when testing a map from the editor.
git-svn-id: https://svn.eduke32.com/eduke32@2001 1a8010ca-5511-0410-912e-c29ae57300e0
* Read-only CON access to sector bunchnums by adding the labels '.ceilingbunch' and '.floorbunch' to the CON sector structure
git-svn-id: https://svn.eduke32.com/eduke32@1931 1a8010ca-5511-0410-912e-c29ae57300e0
