Specifically, it was in the "determine searchwall when aiming at floor or
ceiling" part. Now, if prsectors[]->ceil.plane (or ->floor.plane) is NULL,
we set the searchwall to the sector's firstwall and return.
git-svn-id: https://svn.eduke32.com/eduke32@2610 1a8010ca-5511-0410-912e-c29ae57300e0
This has been there since searchbottomwall introduction in r1466.
git-svn-id: https://svn.eduke32.com/eduke32@2604 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, we only set the viewingrange according to the physical screen's
dimensions, but didn't correct yxaspect for a potential non-square pixel
ratio.
git-svn-id: https://svn.eduke32.com/eduke32@2603 1a8010ca-5511-0410-912e-c29ae57300e0
Consequently, it's not saved as a setting in either the game or editor
config files. We do this by calling "GetSystemMetrics(SM_CXSCREEN)"
(accordingly for y) and calculating the cvar by dividing common factors,
since it has to be in the form WWHH. This may fail for _really_ strange
screen dimensions, so a log message is printed at the very beginning.
git-svn-id: https://svn.eduke32.com/eduke32@2601 1a8010ca-5511-0410-912e-c29ae57300e0
Because this doesn't even seem to work on XP, we're being spammed with
DDERR_SURFACELOST messages...
git-svn-id: https://svn.eduke32.com/eduke32@2600 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, it was possible to leave a sector with less than three walls if
a point got deleted transitively by a TROR link. Now, a proper check is done
for all deletion candidates and a message stating which wall and sector is
problematic is printed. Thanks for Diaz for pointing out the brokenness.
git-svn-id: https://svn.eduke32.com/eduke32@2599 1a8010ca-5511-0410-912e-c29ae57300e0
- factor out many identical checks in a convenient function; some messages
may read slightly differently now and tile ranges may be handled more strictly
(error out if one of the limits is invalid)
- factor out two instances of identical (up to one arg) code into
tile_from_truecolpic
- factor out setting picsiz[] and stuff into set_picsizanm
- some checks
- Make "undefmodelof" non-functional and warn.
- in "animtilerange", if the tile difference is >= 64, error out since we
can't store it in picanm[]
git-svn-id: https://svn.eduke32.com/eduke32@2588 1a8010ca-5511-0410-912e-c29ae57300e0
Allow all drivers for now; if anything, we should start maintaining a
blacklist now that most Intel chips have decent enough support to be
able to run stuff satisfactorily.
git-svn-id: https://svn.eduke32.com/eduke32@2580 1a8010ca-5511-0410-912e-c29ae57300e0
This requires one tweak in drawrooms' umost/dmost setup to prevent oob access.
Specifically, a coordinate difference of 0 is allowed. In the classic renderer,
this would mean a one-pixel (real screen coords) height or width. In Polymost,
it would currently mean a one-pixel height and zero-pixel width, but this might
be subject to change.
git-svn-id: https://svn.eduke32.com/eduke32@2574 1a8010ca-5511-0410-912e-c29ae57300e0
(That is, the base shade table.) Before, we allocated each palookup buffer.
For a vanilla setup, this means that we're now saving 224*32*256 ~= 1.8 megs,
which might be interesting for low-memory gadgets.
git-svn-id: https://svn.eduke32.com/eduke32@2571 1a8010ca-5511-0410-912e-c29ae57300e0
First, it's unlikely in our day and age. Second, they're always free'd at the end,
so allocache'ing them is incorrect.
git-svn-id: https://svn.eduke32.com/eduke32@2570 1a8010ca-5511-0410-912e-c29ae57300e0
Also,
- use this in game.c and astub.c palookup loading code
- when makepalookup() is passed a 0 palnum, return early. This means that
'fogpal' will silently fail when attempting to change pal 0.
- in 'makepalookup' DEF command, error out if passed a pal of 0.
git-svn-id: https://svn.eduke32.com/eduke32@2569 1a8010ca-5511-0410-912e-c29ae57300e0
The syntax is as follows:
makepalookup { <token-list...> }
where valid tokens are
* pal <palnum>: the palette number, 1 .. 250
* red <num>, green, blue (or r, g, b): the fog color components on a 0 to 63 scale.
Components that are not present are assumed to be 0.
* remappal <palnum>: the palette number to take the index remapping from, i.e. 21
for blue -> red. When absent, defaults to 0.
* remapself: when present, specifies that the remappal is the same as the 'pal'.
This is to prevent textual redundancy when overwriting existing palookups.
Examples (best tested with tile #251):
1) makepalookup { pal 200 red 30 remappal 23 }
This creates palookup 200 with a fog of (30,0,0) and a blue-to-yellow remapping
(assuming it has not been changed before)
2) makepalookup { pal 21 red 30 remapself }
This 'fogifies' palookup 21 with a red fog.
3) makepalookup { pal 21 red 30 }
This overwrites palookup 21 with a red fog, but clears the blue-to-red remapping.
The fog aspect of this command affects the GL modes just like 'fogpal', but the
remapping has no effect for hightiles.
- Also, silently clamp 'fogpal' r,g,b values to the range 0 .. 63.
git-svn-id: https://svn.eduke32.com/eduke32@2568 1a8010ca-5511-0410-912e-c29ae57300e0
It allocates a buffer of size BMAX_PATH and copies the passed string into it.
git-svn-id: https://svn.eduke32.com/eduke32@2560 1a8010ca-5511-0410-912e-c29ae57300e0
Don't actually replace the instances in the code now.
Additions in common.h:
- fnlist_t, which combines CACHE1D_FIND_REC *finddirs, *findfiles and
int32_t numdirs, numfiles
- the FNLIST_INITIALIZER macro, which MUST be used for automatic variables
- fnlist_clearnames, fnlist_getnames functions
- G_LoadGroupsInDir, G_DoAutoload, two often-occurring uses of these
git-svn-id: https://svn.eduke32.com/eduke32@2555 1a8010ca-5511-0410-912e-c29ae57300e0
Alongside, these make into into the header:
- the 'tokenlist' type (a typedef'd struct)
- the T_EOF and T_ERROR enumeration values
git-svn-id: https://svn.eduke32.com/eduke32@2549 1a8010ca-5511-0410-912e-c29ae57300e0
As inauguration, move G_AddGroup, G_AddPath and struct strllist there.
The header is located in build/include, because in the future, code that resides
closer to (but is not strictly part of) the engine might need to be factored
into here. The source file, however, is in the source/ directory.
git-svn-id: https://svn.eduke32.com/eduke32@2542 1a8010ca-5511-0410-912e-c29ae57300e0
- Help window text cleaned and made more consistent between game and editor
- Added help entry for "-clipmap"
- Log text for using CON, DEF, and RTS files has been made consistent
- All instances of '%s' have been replaced with \"%s\" because ' is a valid filename character. (At least on Windows.)
git-svn-id: https://svn.eduke32.com/eduke32@2538 1a8010ca-5511-0410-912e-c29ae57300e0
This was broken ever since updatesprite() had been forked off drawsprite() and
would cause static lights to never hit static sprites until one or the other
changed, after which the light would always get culled against outdated sprite
geometry.
git-svn-id: https://svn.eduke32.com/eduke32@2536 1a8010ca-5511-0410-912e-c29ae57300e0
Since updatesprite() only happens once for static sprites, avoiding
light culling if we hit it in a shadow pass means that sprite will
never be lit as long as that happens.
git-svn-id: https://svn.eduke32.com/eduke32@2535 1a8010ca-5511-0410-912e-c29ae57300e0
There are instances where oob picnums may propagate to that function, so
protect it. The digitanumber[z] bound check is actually made more permissive,
but could also just as well be removed now.
git-svn-id: https://svn.eduke32.com/eduke32@2533 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the differences in these codes stand out much more clearly.
git-svn-id: https://svn.eduke32.com/eduke32@2526 1a8010ca-5511-0410-912e-c29ae57300e0
