2008-07-25 01:37:44 +00:00
|
|
|
cmake_minimum_required( VERSION 2.4 )
|
2013-02-25 00:12:21 +00:00
|
|
|
project(ZDoom)
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
|
2013-10-11 00:40:15 +00:00
|
|
|
list( APPEND CMAKE_MODULE_PATH ${CMAKE_CURRENT_SOURCE_DIR} )
|
|
|
|
|
include( CreateLaunchers )
|
2013-11-06 18:37:34 +00:00
|
|
|
include( FindPackageHandleStandardArgs )
|
2013-10-11 00:40:15 +00:00
|
|
|
|
2013-07-01 20:57:46 +00:00
|
|
|
# Generator expression are available some time in CMake 2.8. Due to
|
|
|
|
|
# cmake_minimum_required, we can assume a minor version of > 7 implies major >= 2
|
|
|
|
|
if(${CMAKE_MAJOR_VERSION} GREATER 2 OR ${CMAKE_MINOR_VERSION} GREATER 7)
|
|
|
|
|
option( NO_GENERATOR_EXPRESSIONS "Disable generator expressions (for building pk3s with IDEs)." OFF )
|
|
|
|
|
else(${CMAKE_MAJOR_VERSION} GREATER 2 OR ${CMAKE_MINOR_VERSION} GREATER 7)
|
|
|
|
|
set( NO_GENERATOR_EXPRESSIONS ON )
|
|
|
|
|
endif(${CMAKE_MAJOR_VERSION} GREATER 2 OR ${CMAKE_MINOR_VERSION} GREATER 7)
|
|
|
|
|
|
2014-01-02 06:59:04 +00:00
|
|
|
# Support cross compiling
|
|
|
|
|
option( FORCE_CROSSCOMPILE "Turn on cross compiling." NO )
|
|
|
|
|
if( FORCE_CROSSCOMPILE )
|
|
|
|
|
set( CMAKE_CROSSCOMPILING TRUE )
|
|
|
|
|
endif( FORCE_CROSSCOMPILE )
|
|
|
|
|
|
|
|
|
|
if(CMAKE_CROSSCOMPILING)
|
|
|
|
|
set(IMPORT_EXECUTABLES "IMPORTFILE-NOTFOUND" CACHE FILEPATH "Export file from native build.")
|
|
|
|
|
include(${IMPORT_EXECUTABLES})
|
|
|
|
|
endif(CMAKE_CROSSCOMPILING)
|
|
|
|
|
|
2013-07-01 20:57:46 +00:00
|
|
|
# Simplify pk3 building, add_pk3(filename srcdirectory)
|
|
|
|
|
function( add_pk3 PK3_NAME PK3_DIR )
|
|
|
|
|
get_target_property(ZIPDIR_EXE zipdir LOCATION)
|
|
|
|
|
|
|
|
|
|
# Generate target name. Just use "pk3" for main pk3 target.
|
|
|
|
|
string( REPLACE "." "_" PK3_TARGET ${PK3_NAME} )
|
|
|
|
|
if( ${PK3_TARGET} STREQUAL "zdoom_pk3" )
|
|
|
|
|
set( PK3_TARGET "pk3" )
|
|
|
|
|
endif( ${PK3_TARGET} STREQUAL "zdoom_pk3" )
|
|
|
|
|
|
2013-10-11 00:40:15 +00:00
|
|
|
if( NOT NO_GENERATOR_EXPRESSIONS AND NOT ZDOOM_OUTPUT_OLDSTYLE )
|
2013-07-01 20:57:46 +00:00
|
|
|
add_custom_command( OUTPUT ${ZDOOM_OUTPUT_DIR}/${PK3_NAME}
|
|
|
|
|
COMMAND ${ZIPDIR_EXE} -udf ${ZDOOM_OUTPUT_DIR}/${PK3_NAME} ${PK3_DIR}
|
2013-11-26 17:49:23 +00:00
|
|
|
COMMAND ${CMAKE_COMMAND} -E copy_if_different ${ZDOOM_OUTPUT_DIR}/${PK3_NAME} $<TARGET_FILE_DIR:zdoom>/${PK3_NAME}
|
2013-11-29 22:13:34 +00:00
|
|
|
DEPENDS zipdir )
|
2013-10-11 00:40:15 +00:00
|
|
|
else( NOT NO_GENERATOR_EXPRESSIONS AND NOT ZDOOM_OUTPUT_OLDSTYLE )
|
2013-07-01 20:57:46 +00:00
|
|
|
add_custom_command( OUTPUT ${ZDOOM_OUTPUT_DIR}/${PK3_NAME}
|
2013-11-28 19:41:40 +00:00
|
|
|
COMMAND ${ZIPDIR_EXE} -udf ${ZDOOM_OUTPUT_DIR}/${PK3_NAME} ${PK3_DIR}
|
2013-11-29 22:13:34 +00:00
|
|
|
DEPENDS zipdir )
|
2013-10-11 00:40:15 +00:00
|
|
|
endif( NOT NO_GENERATOR_EXPRESSIONS AND NOT ZDOOM_OUTPUT_OLDSTYLE )
|
2013-07-01 20:57:46 +00:00
|
|
|
|
2013-11-29 22:13:34 +00:00
|
|
|
# Touch the zipdir executable here so that the pk3s are forced to rebuild
|
|
|
|
|
# each time since their dependecy has "changed."
|
2013-07-01 20:57:46 +00:00
|
|
|
add_custom_target( ${PK3_TARGET} ALL
|
2013-11-29 22:13:34 +00:00
|
|
|
COMMAND ${CMAKE_COMMAND} -E touch ${ZIPDIR_EXE}
|
2013-07-01 20:57:46 +00:00
|
|
|
DEPENDS ${ZDOOM_OUTPUT_DIR}/${PK3_NAME} )
|
|
|
|
|
endfunction( add_pk3 )
|
|
|
|
|
|
2013-10-12 04:24:04 +00:00
|
|
|
# Macro for building libraries without debugging information
|
|
|
|
|
macro( make_release_only )
|
|
|
|
|
set( CMAKE_C_FLAGS_MINSIZEREL ${CMAKE_C_FLAGS_RELEASE} )
|
|
|
|
|
set( CMAKE_C_FLAGS_RELWITHDEBINFO ${CMAKE_C_FLAGS_RELEASE} )
|
2013-10-12 05:44:57 +00:00
|
|
|
string( REPLACE "/MT " "/MTd " CMAKE_C_FLAGS_DEBUG ${CMAKE_C_FLAGS_RELEASE} )
|
2013-10-12 04:24:04 +00:00
|
|
|
set( CMAKE_CXX_FLAGS_MINSIZEREL ${CMAKE_CXX_FLAGS_RELEASE} )
|
|
|
|
|
set( CMAKE_CXX_FLAGS_RELWITHDEBINFO ${CMAKE_CXX_FLAGS_RELEASE} )
|
2013-10-12 05:44:57 +00:00
|
|
|
string( REPLACE "/MT " "/MTd " CMAKE_CXX_FLAGS_DEBUG ${CMAKE_CXX_FLAGS_RELEASE} )
|
2013-10-12 04:24:04 +00:00
|
|
|
endmacro( make_release_only )
|
|
|
|
|
|
2009-03-10 23:07:37 +00:00
|
|
|
IF( NOT CMAKE_BUILD_TYPE )
|
|
|
|
|
SET( CMAKE_BUILD_TYPE Debug CACHE STRING
|
|
|
|
|
"Choose the type of build, options are: Debug Release RelWithDebInfo MinSizeRel."
|
|
|
|
|
FORCE )
|
2008-10-14 01:28:04 +00:00
|
|
|
ENDIF( NOT CMAKE_BUILD_TYPE )
|
|
|
|
|
|
2009-04-08 22:26:09 +00:00
|
|
|
set( ZDOOM_OUTPUT_DIR ${CMAKE_BINARY_DIR} CACHE PATH "Directory where zdoom.pk3 and the executable will be created." )
|
|
|
|
|
set( ZDOOM_EXE_NAME "zdoom" CACHE FILEPATH "Name of the executable to create." )
|
2013-10-11 00:40:15 +00:00
|
|
|
if( MSVC )
|
|
|
|
|
# Allow the user to use ZDOOM_OUTPUT_DIR as a single release point.
|
|
|
|
|
# Use zdoom, zdoomd, zdoom64, and zdoomd64 for the binary names
|
|
|
|
|
option( ZDOOM_OUTPUT_OLDSTYLE "Don't use Release/Debug directories." OFF )
|
|
|
|
|
else( MSVC )
|
|
|
|
|
set( ZDOOM_OUTPUT_OLDSTYLE OFF )
|
|
|
|
|
endif( MSVC )
|
2009-04-08 22:26:09 +00:00
|
|
|
|
2013-06-23 16:37:13 +00:00
|
|
|
if( "${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" OR "${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang" )
|
2009-09-08 03:01:55 +00:00
|
|
|
set( PROFILE 0 CACHE BOOL "Enable profiling with gprof for Debug and RelWithDebInfo build types." )
|
2013-06-23 16:37:13 +00:00
|
|
|
endif( "${CMAKE_CXX_COMPILER_ID}" STREQUAL "GNU" OR "${CMAKE_CXX_COMPILER_ID}" STREQUAL "Clang" )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
|
2011-08-16 21:59:35 +00:00
|
|
|
set(CMAKE_MODULE_PATH "${CMAKE_SOURCE_DIR}")
|
|
|
|
|
|
2009-05-25 20:58:59 +00:00
|
|
|
find_package( BZip2 )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
find_package( JPEG )
|
|
|
|
|
find_package( ZLIB )
|
2013-11-06 18:37:34 +00:00
|
|
|
# GME
|
|
|
|
|
find_path( GME_INCLUDE_DIR gme.h )
|
|
|
|
|
find_library( GME_LIBRARIES gme )
|
|
|
|
|
mark_as_advanced( GME_INCLUDE_DIR GME_LIBRARIES )
|
|
|
|
|
FIND_PACKAGE_HANDLE_STANDARD_ARGS( GME
|
|
|
|
|
REQUIRED_VARS GME_LIBRARIES GME_INCLUDE_DIR
|
|
|
|
|
)
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
|
|
|
|
|
if( MSVC )
|
|
|
|
|
# Eliminate unreferenced functions and data
|
|
|
|
|
# Perform identical COMDAT folding
|
2013-10-12 04:56:49 +00:00
|
|
|
set( REL_LINKER_FLAGS "/opt:ref /opt:icf /nodefaultlib:msvcrt /TSAWARE" )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
|
|
|
|
|
# String pooling
|
|
|
|
|
# Function-level linking
|
|
|
|
|
# Disable run-time type information
|
|
|
|
|
set( ALL_C_FLAGS "/GF /Gy /GR-" )
|
|
|
|
|
|
2013-11-29 11:35:45 +00:00
|
|
|
if( CMAKE_SIZEOF_VOID_P MATCHES "4")
|
|
|
|
|
# SSE2 option (mostly to switch it off in VC2012 and later where it's the default
|
|
|
|
|
option (ZDOOM_USE_SSE2 "Use SSE2 instruction set")
|
|
|
|
|
if (ZDOOM_USE_SSE2)
|
|
|
|
|
set( ALL_C_FLAGS "${ALL_C_FLAGS} /arch:SSE2")
|
|
|
|
|
else (ZDOOM_USE_SSE2)
|
|
|
|
|
if (MSVC_VERSION GREATER 1699)
|
|
|
|
|
# On Visual C++ 2012 and later SSE2 is the default, so we need to switch it off explicitly
|
|
|
|
|
set( ALL_C_FLAGS "${ALL_C_FLAGS} /arch:IA32")
|
|
|
|
|
endif (MSVC_VERSION GREATER 1699)
|
|
|
|
|
endif (ZDOOM_USE_SSE2)
|
|
|
|
|
endif( CMAKE_SIZEOF_VOID_P MATCHES "4")
|
|
|
|
|
|
2013-11-28 10:03:19 +00:00
|
|
|
# Avoid CRT DLL dependancies in release builds, optionally generate assembly output for checking crash locations.
|
|
|
|
|
option( ZDOOM_GENERATE_ASM "Generate assembly output." OFF )
|
|
|
|
|
if( ZDOOM_GENERATE_ASM )
|
2013-11-29 11:35:45 +00:00
|
|
|
set( REL_C_FLAGS "/MT /Oy /Oi /FAcs" )
|
2013-11-28 10:03:19 +00:00
|
|
|
else( ZDOOM_GENERATE_ASM )
|
2013-11-29 11:35:45 +00:00
|
|
|
set( REL_C_FLAGS "/MT /Oy /Oi" )
|
2013-11-28 10:03:19 +00:00
|
|
|
endif( ZDOOM_GENERATE_ASM )
|
2013-11-29 11:35:45 +00:00
|
|
|
|
2013-11-28 10:03:19 +00:00
|
|
|
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
# Debug allocations in debug builds
|
2013-10-12 05:44:57 +00:00
|
|
|
set( DEB_C_FLAGS "/D _CRTDBG_MAP_ALLOC /MTd" )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
|
|
|
|
|
# Disable warnings for unsecure CRT functions from VC8+
|
|
|
|
|
if( MSVC_VERSION GREATER 1399 )
|
|
|
|
|
set( ALL_C_FLAGS "${ALL_C_FLAGS} /wd4996" )
|
|
|
|
|
endif( MSVC_VERSION GREATER 1399 )
|
|
|
|
|
|
|
|
|
|
# The CMake configurations set /GR and /MD by default, which conflict with our settings.
|
|
|
|
|
string(REPLACE "/MD " " " CMAKE_CXX_FLAGS_RELEASE ${CMAKE_CXX_FLAGS_RELEASE} )
|
|
|
|
|
string(REPLACE "/MD " " " CMAKE_CXX_FLAGS_MINSIZEREL ${CMAKE_CXX_FLAGS_MINSIZEREL} )
|
|
|
|
|
string(REPLACE "/MD " " " CMAKE_CXX_FLAGS_RELWITHDEBINFO ${CMAKE_CXX_FLAGS_RELWITHDEBINFO} )
|
2013-10-12 04:56:49 +00:00
|
|
|
string(REPLACE "/MDd " " " CMAKE_CXX_FLAGS_DEBUG ${CMAKE_CXX_FLAGS_DEBUG} )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
string(REPLACE "/MD " " " CMAKE_C_FLAGS_RELEASE ${CMAKE_C_FLAGS_RELEASE} )
|
|
|
|
|
string(REPLACE "/MD " " " CMAKE_C_FLAGS_MINSIZEREL ${CMAKE_C_FLAGS_MINSIZEREL} )
|
|
|
|
|
string(REPLACE "/MD " " " CMAKE_C_FLAGS_RELWITHDEBINFO ${CMAKE_C_FLAGS_RELWITHDEBINFO} )
|
2013-10-12 04:56:49 +00:00
|
|
|
string(REPLACE "/MDd " " " CMAKE_C_FLAGS_DEBUG ${CMAKE_C_FLAGS_DEBUG} )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
string(REPLACE " /GR" " " CMAKE_CXX_FLAGS ${CMAKE_CXX_FLAGS} )
|
|
|
|
|
endif( MSVC )
|
|
|
|
|
|
|
|
|
|
set( CMAKE_EXE_LINKER_FLAGS_RELEASE "${CMAKE_EXE_LINKER_FLAGS_RELEASE} ${REL_LINKER_FLAGS}" )
|
|
|
|
|
set( CMAKE_EXE_LINKER_FLAGS_MINSIZEREL "${CMAKE_EXE_LINKER_FLAGS_MINSIZEREL} ${REL_LINKER_FLAGS}" )
|
|
|
|
|
set( CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO "${CMAKE_EXE_LINKER_FLAGS_RELWITHDEBINFO} ${REL_LINKER_FLAGS}" )
|
|
|
|
|
|
|
|
|
|
set( CMAKE_C_FLAGS "${CMAKE_C_FLAGS} ${ALL_C_FLAGS}" )
|
|
|
|
|
set( CMAKE_C_FLAGS_RELEASE "${CMAKE_C_FLAGS_RELEASE} ${REL_C_FLAGS}" )
|
|
|
|
|
set( CMAKE_C_FLAGS_MINSIZEREL "${CMAKE_C_FLAGS_MINSIZEREL} ${REL_C_FLAGS}" )
|
|
|
|
|
set( CMAKE_C_FLAGS_RELWITHDEBINFO "${CMAKE_C_FLAGS_RELWITHDEBINFO} ${REL_C_FLAGS}" )
|
|
|
|
|
set( CMAKE_C_FLAGS_DEBUG "${CMAKE_C_FLAGS_DEBUG} ${DEB_C_FLAGS} -D_DEBUG" )
|
|
|
|
|
|
|
|
|
|
set( CMAKE_CXX_FLAGS "${CMAKE_CXX_FLAGS} ${ALL_C_FLAGS}" )
|
|
|
|
|
set( CMAKE_CXX_FLAGS_RELEASE "${CMAKE_CXX_FLAGS_RELEASE} ${REL_C_FLAGS}" )
|
|
|
|
|
set( CMAKE_CXX_FLAGS_MINSIZEREL "${CMAKE_CXX_FLAGS_MINSIZEREL} ${REL_C_FLAGS}" )
|
|
|
|
|
set( CMAKE_CXX_FLAGS_RELWITHDEBINFO "${CMAKE_CXX_FLAGS_RELWITHDEBINFO} ${REL_C_FLAGS}" )
|
|
|
|
|
set( CMAKE_CXX_FLAGS_DEBUG "${CMAKE_CXX_FLAGS_DEBUG} ${DEB_C_FLAGS} -D_DEBUG" )
|
|
|
|
|
|
2010-08-12 02:32:03 +00:00
|
|
|
option(FORCE_INTERNAL_ZLIB "Use internal zlib")
|
|
|
|
|
option(FORCE_INTERNAL_JPEG "Use internal jpeg")
|
|
|
|
|
option(FORCE_INTERNAL_BZIP2 "Use internal bzip2")
|
2013-11-06 18:37:34 +00:00
|
|
|
option(FORCE_INTERNAL_GME "Use internal gme" ON)
|
2010-08-12 02:32:03 +00:00
|
|
|
|
|
|
|
|
if( ZLIB_FOUND AND NOT FORCE_INTERNAL_ZLIB )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
message( STATUS "Using system zlib" )
|
2010-08-12 02:32:03 +00:00
|
|
|
else( ZLIB_FOUND AND NOT FORCE_INTERNAL_ZLIB )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
message( STATUS "Using internal zlib" )
|
|
|
|
|
add_subdirectory( zlib )
|
|
|
|
|
set( ZLIB_INCLUDE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/zlib )
|
|
|
|
|
set( ZLIB_LIBRARIES z )
|
|
|
|
|
set( ZLIB_LIBRARY z )
|
2010-08-12 02:32:03 +00:00
|
|
|
endif( ZLIB_FOUND AND NOT FORCE_INTERNAL_ZLIB )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
|
2010-08-12 02:32:03 +00:00
|
|
|
if( JPEG_FOUND AND NOT FORCE_INTERNAL_JPEG )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
message( STATUS "Using system jpeg library" )
|
2010-08-12 02:32:03 +00:00
|
|
|
else( JPEG_FOUND AND NOT FORCE_INTERNAL_JPEG )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
message( STATUS "Using internal jpeg library" )
|
|
|
|
|
add_subdirectory( jpeg-6b )
|
|
|
|
|
set( JPEG_INCLUDE_DIR ${CMAKE_CURRENT_SOURCE_DIR}/jpeg-6b )
|
|
|
|
|
set( JPEG_LIBRARIES jpeg )
|
|
|
|
|
set( JPEG_LIBRARY jpeg )
|
2010-08-12 02:32:03 +00:00
|
|
|
endif( JPEG_FOUND AND NOT FORCE_INTERNAL_JPEG )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
|
2010-08-12 02:32:03 +00:00
|
|
|
if( BZIP2_FOUND AND NOT FORCE_INTERNAL_BZIP2 )
|
2009-05-25 20:58:59 +00:00
|
|
|
message( STATUS "Using system bzip2 library" )
|
2010-08-12 02:32:03 +00:00
|
|
|
else( BZIP2_FOUND AND NOT FORCE_INTERNAL_BZIP2 )
|
2009-05-25 20:58:59 +00:00
|
|
|
message( STATUS "Using internal bzip2 library" )
|
|
|
|
|
add_subdirectory( bzip2 )
|
|
|
|
|
set( BZIP2_INCLUDE_DIR "${CMAKE_CURRENT_SOURCE_DIR}/bzip2" )
|
|
|
|
|
set( BZIP2_LIBRARIES bz2 )
|
|
|
|
|
set( BZIP2_LIBRARY bz2 )
|
2010-08-12 02:32:03 +00:00
|
|
|
endif( BZIP2_FOUND AND NOT FORCE_INTERNAL_BZIP2 )
|
2009-05-25 20:58:59 +00:00
|
|
|
|
2013-11-06 18:37:34 +00:00
|
|
|
if( GME_FOUND AND NOT FORCE_INTERNAL_GME )
|
|
|
|
|
message( STATUS "Using system gme library ${GME_INCLUDE_DIR}" )
|
|
|
|
|
else( GME_FOUND AND NOT FORCE_INTERNAL_GME )
|
|
|
|
|
message( STATUS "Using internal gme library" )
|
|
|
|
|
add_subdirectory( game-music-emu )
|
|
|
|
|
set( GME_INCLUDE_DIR "${CMAKE_CURRENT_SOURCE_DIR}/game-music-emu" )
|
|
|
|
|
set( GME_LIBRARIES gme )
|
|
|
|
|
endif( GME_FOUND AND NOT FORCE_INTERNAL_GME )
|
|
|
|
|
|
2009-03-10 23:07:37 +00:00
|
|
|
set( LZMA_INCLUDE_DIR "${CMAKE_CURRENT_SOURCE_DIR}/lzma/C" )
|
|
|
|
|
|
|
|
|
|
add_subdirectory( lzma )
|
About a week's worth of changes here. As a heads-up, I wouldn't be
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
2008-07-23 04:57:26 +00:00
|
|
|
add_subdirectory( tools )
|
|
|
|
|
add_subdirectory( dumb )
|
|
|
|
|
add_subdirectory( gdtoa )
|
|
|
|
|
add_subdirectory( wadsrc )
|
|
|
|
|
add_subdirectory( src )
|
2009-03-11 04:56:43 +00:00
|
|
|
|
2009-09-03 03:51:41 +00:00
|
|
|
if( NOT WIN32 AND NOT APPLE )
|
2009-03-11 04:56:43 +00:00
|
|
|
add_subdirectory( output_sdl )
|
2009-09-03 03:51:41 +00:00
|
|
|
endif( NOT WIN32 AND NOT APPLE )
|
2014-01-02 06:59:04 +00:00
|
|
|
|
|
|
|
|
if( NOT CMAKE_CROSSCOMPILING )
|
|
|
|
|
export(TARGETS ${CROSS_EXPORTS} FILE "${CMAKE_BINARY_DIR}/ImportExecutables.cmake" )
|
|
|
|
|
endif( NOT CMAKE_CROSSCOMPILING )
|
