Commit graph

9 commits

Author SHA1 Message Date
Christoph Oelckers
ebd17de30a - Fixed: PIT_FindFloorCeiling required tmx and tmy to be set but
P_FindFloorCeiling never did that.
- Merged Check_Sides and PIT_CrossLine into A_PainShootSkull.
- Replaced P_BlockLinesIterator with FBlockLinesIterator in all places it was
  used. This also allowed to remove all the global variable saving in
  P_CreateSecNodeList.
- Added a new FBlockLinesIterator class that doesn't need a callback
  function because debugging the previous bug proved to be a bit annoying
  because it involved a P_BlockLinesIterator loop.
- Fixed: The MBF code to move monsters away from dropoffs did not work as 
  intended due to some random decisions in P_DoNewChaseDir. When in the
  avoiding dropoff mode these are ignored now. This should cure the problem
  that monsters hanging over a dropoff tended to drop down. 

SVN r887 (trunk)
2008-04-06 17:33:43 +00:00
Randy Heit
e5572a1c4e - Updated lempar.c to v1.31.
- Added .txt files to the list of types (wad, zip, and pk3) that can be
  loaded without listing them after -file.
- Fonts that are created by the ACS setfont command to wrap a texture now
  support animated textures.
- FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn
  with the hardware 2D path instead of being restricted to the game palette.
- Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1
  on a Radeon 9000.
- Added back the off-by-one palette handling, but in a much more limited
  scope than before. The skipped entry is assumed to always be at 248, and
  it is assumed that all Shader Model 1.4 cards suffer from this. That's
  because all SM1.4 cards are based on variants of the ATI R200 core, and the
  RV250 in a Radeon 9000 craps up like this. I see no reason to assume that
  other flavors of the R200 are any different. (Interesting note: With the
  Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the
  debug Direct3D 9 runtime, but it works perfectly fine with the retail
  Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its
  math inside pixel shaders. That would explain perfectly why I can't use
  constants greater than 1 with PS1.4 and why it can't do an exact mapping to
  every entry in the color palette.
- Fixed: The software shaded drawer did not work for 2D, because its selected
  "color"map was replaced with the identitymap before being used.
- Fixed: I cannot use Printf to output messages before the framebuffer was
  completely setup, meaning that Shader Model 1.4 cards could not change
  resolution.
- I have decided to let remap palettes specify variable alpha values for
  their colors. D3DFB no longer forces them to 255.
- Updated re2c to version 0.12.3.
- Fixed: A_Wander used threshold as a timer, when it should have used
  reactiontime.
- Fixed: A_CustomRailgun would not fire at all for actors without a target
  when the aim parameter was disabled.
- Made the warp command work in multiplayer, again courtesy of Karate Chris.
- Fixed: Trying to spawn a bot while not in a game made for a crashing time.
  (Patch courtesy of Karate Chris.)
- Removed some floating point math from hu_scores.cpp that somebody's GCC
  gave warnings for (not mine, though).
- Fixed: The SBarInfo drawbar command crashed if the sprite image was
  unavailable.
- Fixed: FString::operator=(const char *) did not release its old buffer when
  being assigned to the null string.
- The scanner no longer has an upper limit on the length of strings it
  accepts, though short strings will be faster than long ones.
- Moved all the text scanning functions into a class. Mainly, this means that
  multiple script scanner states can be stored without being forced to do so
  recursively. I think I might be taking advantage of that in the near
  future. Possibly. Maybe.
- Removed some potential buffer overflows from the decal parser.
- Applied Blzut3's SBARINFO update #9:
  * Fixed: When using even length values in drawnumber it would cap to a 98
    value instead of a 99 as intended.
  * The SBarInfo parser can now accept negatives for coordinates. This
    doesn't allow much right now, but later I plan to add better fullscreen
    hud support in which the negatives will be more useful. This also cleans
    up the source a bit since all calls for (x, y) coordinates are with the
    function getCoordinates().
- Added support for stencilling actors.
- Added support for non-black colors specified with DTA_ColorOverlay to the
  software renderer.
- Fixed: The inverse, gold, red, and green fixed colormaps each allocated
  space for 32 different colormaps, even though each only used the first one.
- Added two new blending flags to make reverse subtract blending more useful:
  STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that
  gets blended with the background, since that seems like a good idea for
  reverse subtraction. They also work with the other two blending operations.
- Added subtract and reverse subtract blending operations to the renderer.
  Since the ERenderStyle enumeration was getting rather unwieldy, I converted
  it into a new FRenderStyle structure that lets each parameter of the
  blending equation be set separately. This simplified the set up for the
  blend quite a bit, and it means a number of new combinations are available
  by setting the parameters properly.


SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
Randy Heit
ff65f75a8c - Fixed: The VC++ project was not set up to redefine RM using del in
wadsrc/Makefile, nor did it use the makefile for cleaning.
- Added ST_NetMessage() for mixing miscellaneous messages with the network
  startup meter, since they get mixed in the same space on the Linux terminal
  and must be handled properly to avoid looking bad.


SVN r429 (trunk)
2006-12-29 02:21:47 +00:00
Randy Heit
4899fa91f1 - Fixed the new network status display for the Linux terminal.
SVN r428 (trunk)
2006-12-29 01:48:47 +00:00
Randy Heit
419724dd02 - Assembly code is disabled when building with __APPLE__ defined, for now.
- If you aren't targeting x86, m_fixed.h only includes basicinlines.h now.
- Moved x64inlines.h into basicinlines.h.
- Replaced uses of __int64 with types from doomtype.h.
- The stop console command no longer ends single player games, just the demo
  that was being recorded.
- In C mode, the sc_man parser no longer allows multi-line string constants
  without using the \ character to preface the newline character. This makes
  it much easier to diagnose errors where you forget the closing quote of a
  string.
- Fixed: V_BreakLines() added the terminating '\0' to the last line of the
  input string.
- Added font as a parameter to V_BreakLines and removed its keepspace
  parameter, which was never passed as anything other than the default.


SVN r331 (trunk)
2006-09-19 23:25:51 +00:00
Randy Heit
c412b42703 - Fixed: cycle_t was still a DWORD and not a QWORD under GCC.
- The stat meters now return an FString instead of sprintfing into a fixed
  output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
  - For consistancy with the other integral types, byte is no longer a
    synonym for BYTE.
  - Most uses of BOOL have been change to the standard C++ bool type. Those
    that weren't were changed to INTBOOL to indicate they may contain values
    other than 0 or 1 but are still used as a boolean.
  - Compiler-provided types with explicit bit sizes are now used. In
    particular, DWORD is no longer a long so it will work with both 64-bit
    Windows and Linux.
  - Since some files need to include Windows headers, uint32 is a synonym
    for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
  was all it contained.


SVN r326 (trunk)
2006-09-14 00:02:31 +00:00
Randy Heit
d878c2e7d6 - Backported the classnames-are-names changes from the FP code.
SVN r97 (trunk)
2006-05-10 02:40:43 +00:00
Randy Heit
7e7ab6b4ec - Fixed compilation with mingw again.
- Added multiple-choice sound sequences. These overcome one of the major
  deficiences of the Hexen-inherited SNDSEQ system while still being Hexen
  compatible: Custom door sounds can now use different opening and closing
  sequences, for both normal and blazing speeds.
- Added a serializer for TArray.
- Added a countof macro to doomtype.h. See the1's blog to find out why
  it's implemented the way it is.
    <http://blogs.msdn.com/the1/articles/210011.aspx>
- Added a new method to FRandom for getting random numbers larger than 255,
  which lets me:
- Fixed: SNDSEQ delayrand commands could delay for no more than 255 tics.
- Fixed: If you're going to have sector_t.SoundTarget, then they need to
  be included in the pointer cleanup scans.
- Ported back newer name code from 2.1.
- Fixed: Using -warp with only one parameter in Doom and Heretic to
  select a map on episode 1 no longer worked.
- New: Loading a multiplayer save now restores the players based on
  their names rather than on their connection order. Using connection
  order was sensible when -net was the only way to start a network game,
  but with -host/-join, it's not so nice. Also, if there aren't enough
  players in the save, then the extra players will be spawned normally,
  so you can continue a saved game with more players than you started it
  with.
- Added some new SNDSEQ commands to make it possible to define Heretic's
  ambient sounds in SNDSEQ: volumerel, volumerand, slot, randomsequence,
  delayonce, and restart. With these, it is basically possible to obsolete
  all of the $ambient SNDINFO commands.
- Fixed: Sound sequences would only execute one command each time they were
  ticked.
- Fixed: No bounds checking was done on the volume sound sequences played at.
- Fixed: The tic parameter to playloop was useless and caused it to
  act like a redundant playrepeat. I have removed all the logic that
  caused playloop to play repeating sounds, and now it acts like an
  infinite sequence of play/delay commands until the sequence is
  stopped.
- Fixed: Sound sequences were ticked every frame, not every tic, so all
  the delay commands were timed incorrectly and varied depending on your
  framerate. Since this is useful for restarting looping sounds that got
  cut off, I have not changed this. Instead, the delay commands now
  record the tic when execution should resume, not the number of tics
  left to delay.


SVN r57 (trunk)
2006-04-21 01:22:55 +00:00
Randy Heit
cf11cbdb30 Directory restructuring to make it easier to version projects that don't build zdoom.exe.
SVN r4 (trunk)
2006-02-24 04:48:15 +00:00