optional freeverb unit.
- Removed ResetEnvironment hack, since with software reverb, losing the
existing reverb when focus is lost isn't a problem.
- Commented out the TiMidity FIXME messages.
SVN r973 (trunk)
channel when restarting the song, rather than emitting a single note off
event which only has a 1 in 127 chance of being for a note that's playing
on that channel. Then I decided it would probably be a good idea to reset
all the controllers as well.
- Increasing the size of the internal Timidity stream buffer from 1/14 sec
(copied from the OPL player) improved its sound dramatically, so apparently
Timidity has issues with short stream buffers. It's now at 1/2 sec in
length. However, there seems to be something weird going on with
corazonazul_ff6boss.mid near the beginning where it stops and immediately
restarts a guitar on the exact same note.
- Added a new sound debugging cvar: snd_drawoutput, which can show various
oscilloscopes and spectrums.
- Internal TiMidity now plays music.
- Changed the progdir global variable into an FString.
SVN r900 (trunk)
into a general MIDI player.
- Fixed: Passing false for a stream callback did not stop the stream.
- Removed opl_frequency, since the only time the emulation sounds good is
when it plays at the exact frequency of a real chip.
- Music no longer plays at all when snd_musicvolume is 0.
- Bumped up snd_sfxvolume and snd_musicvolume default values.
SVN r862 (trunk)
- Removed movie volume from the sound menu and renamed some of the other
options to give the MIDI device name more room to display itself.
- Moved the midi device selection into the main sound menu.
- Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the
default device. By default, it uses exactly the same DLS instruments as the
Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set
you want to use, set the snd_midipatchfile cvar to specify where it should
load the instruments from.
- Changed the ProduceMIDI function to store its output into a TArray<BYTE>.
An overloaded version wraps around it to continue to supply file-writing
support for external Timidity++ usage.
- Added an FMOD credits banner to comply with their non-commercial license.
- Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather
than a time in ms, this is now the length in samples of the DSP buffer.
Also added the snd_buffercount cvar to offer complete control over the
call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate
below about 44kHz, you will need to set snd_buffersize to avoid long
latencies.
- Reimplemented the snd_output cvar for the FMOD Ex sound system.
- Changed snd_samplerate default to 0. This now means to use the default
sample rate.
- Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and
snd_hrtf available through the menu.
- Split the HRTF effect selection into its own cvar: snd_hrtf.
- Removed 96000 Hz option from the menu. It's still available through the
cvar, if desired.
- Fixed: If Windows sound init failed, retry with DirectSound. (Apparently,
WASAPI doesn't work with more than two speakers and PCM-Float output at the
same time.)
- Fixed: Area sounds only played from the front speakers once you got within
the 2D panning area.
SVN r854 (trunk)
- Fixed: Heretic linetype translations included the wrong file.
- Removed all 2D sound positioning code from s_sound.cpp. Everything uses
FMOD's 3D engine now.
- Removed all the channel selection code from s_sound.cpp. FMOD has code to
handle this sort of thing, so let's use it.
- Replaced S_StopSoundID() with S_CheckSingular(). There is no longer a limit
on the number of copies of a particular sound that can be playing at once,
aside from Strife's special singular sounds. (Sorry, Heretic and Hexen.)
Consequently, the SNDINFO $limit command is now ignored.
- Removed ATTN_SURROUND, since FMOD Ex doesn't exactly support it, and it
only worked as intended on stereo speakers anyway.
- Cleaned out ancient crud from i_sound.cpp.
SVN r826 (trunk)
for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update
your SDKs. GCC users, be sure to do a "make cleandep && make clean" before
building, or you will likely get inexplicable errors.
- Fixed: If you wanted to make cleandep with MinGW, you had to specifically
specify Makefile.mingw as the makefile to use.
- Added a normalizer to the OPL synth. It helped bring up the volume a little,
but not nearly as much as I would have liked.
- Removed MIDI Mapper references. It doesn't work with the stream API, and
it doesn't really exist on NT kernels, either.
- Reworked music volume: Except for MIDI, all music volume is controlled
through GSnd and not at the individual song level.
- Removed the mididevice global variable.
- Removed snd_midivolume. Now that all music uses a linear volume scale,
there's no need for two separate music volume controls.
- Increased snd_samplerate default up to 48000.
- Added snd_format, defaulting to "PCM-16".
- Added snd_speakermode, defaulting to "Auto".
- Replaced snd_fpu with snd_resampler, defaulting to "Linear".
- Bumped the snd_channels default up from a pitiful 12 to 32.
- Changed snd_3d default to true. The new cvar snd_hw3d determines if
hardware 3D support is used and default to false.
- Removed the libFLAC source, since FMOD Ex has native FLAC support.
- Removed the altsound code, since it was terribly gimped in comparison to
the FMOD code. It's original purpose was to have been as a springboard for
writing a non-FMOD sound system for Unix-y systems, but that never
happened.
- Finished preliminary FMOD Ex support.
SVN r789 (trunk)
be surprised if it doesn't work.
- Reorganized the network startup loops so now they are event driven. There is
a single function that gets called to drive it, and it uses callbacks to
perform the different stages of the synchronization. This lets me have a nice,
responsive abort button instead of the previous unannounced hit-escape-to-
abort behavior, and I think the rearranged code is slightly easier to
understand too.
- Increased the number of bytes for version info during D_ArbitrateNetStart(),
in preparation for the day when NETGAMEVERSION requires more than one byte.
- I noticed an issue with Vista RC1 and the new fatal error setup. Even after
releasing a DirectDraw or Direct3D interface, the DWM can still use the
last image drawn using them when it composites the window. It doesn't always
do it but it does often enough that it is a real problem. At this point, I
don't know if it's a problem with the release version of Vista or not.
After messing around, I discovered the problem was caused by ~Win32Video()
hiding the window and then having it immediately shown soon after. The DWM
kept an image of the window to do the transition effect with, and then when
it didn't get a chance to do the transition, it didn't properly forget about
its saved image and kept plastering it on top of everything else
underneath.
- Added a network synchronization panel to the window during netgame startup.
- Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL.
Otherwise, classic DECORATE definitions generate a big, fat crash.
- Resurrected the R_Init progress bar, now as a standard Windows control.
- Removed the sound failure dialog. The FMOD setup already defaulted to no
sound if initialization failed, so this only applies when snd_output is set
to "alternate" which now also falls back to no sound. In addition, it wasn't
working right, and I didn't feel like fixing it for the probably 0% of users
it affected.
- Fixed: The edit control used for logging output added text in reverse order
on Win9x.
- Went back to the roots and made graphics initialization one of the last
things to happen during setup. Now the startup text is visible again. More
importantly, the main window is no longer created invisible, which seems
to cause trouble with it not always appearing in the taskbar. The fatal
error dialog is now also embedded in the main window instead of being a
separate modal dialog, so you can play with the log window to see any
problems that might be reported there.
Rather than completely restoring the original startup order, I tried to
keep things as close to the way they were with early graphics startup. In
particular, V_Init() now creates a dummy screen so that things that need
screen dimensions can get them. It gets replaced by the real screen later
in I_InitGraphics(). Will need to check this under Linux to make sure it
didn't cause any problems there.
- Removed the following stubs that just called functions in Video:
- I_StartModeIterator()
- I_NextMode()
- I_DisplayType()
I_FullscreenChanged() was also removed, and a new fullscreen parameter
was added to IVideo::StartModeIterator(), since that's all it controlled.
- Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's
initialized post-1.22.
SVN r416 (trunk)
- The stat meters now return an FString instead of sprintfing into a fixed
output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
- For consistancy with the other integral types, byte is no longer a
synonym for BYTE.
- Most uses of BOOL have been change to the standard C++ bool type. Those
that weren't were changed to INTBOOL to indicate they may contain values
other than 0 or 1 but are still used as a boolean.
- Compiler-provided types with explicit bit sizes are now used. In
particular, DWORD is no longer a long so it will work with both 64-bit
Windows and Linux.
- Since some files need to include Windows headers, uint32 is a synonym
for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
was all it contained.
SVN r326 (trunk)
yanking the mouse around if they keys haven't been read yet to combat the
same situation that causes the keyboard to return DIERR_NOTACQUIRED in
KeyRead(): The window is sort of in focus and sort of not. User.dll
considers it to be focused and it's drawn as such, but another focused
window is on top of it, and DirectInput doesn't see it as focused.
- Fixed: KeyRead() should handle DIERR_NOTACQUIRED errors the same way it
handles DIERR_INPUTLOST errors. This can happen if our window had the
focus stolen away from it before we tried to acquire the keyboard in
DI_Init2(). Strangely, MouseRead_DI() already did this.
- When a stack overflow occurs, report.txt now only includes the first and
last 16KB of the stack to make it more manageable.
- Limited StreamEditBinary() to the first 64KB of the file to keep it from
taking too long on large dumps.
- And now I know why gathering crash information in the same process that
crashed can be bad: Stack overflows. You get one spare page to play with
when the stack overflows. MiniDumpWriteDump() needs more than that and
causes an access violation when it runs out of leftover stack, silently
terminating the application. Windows XP x64 offers SetThreadStackGuarantee()
to increase this, but that isn't available on anything older, including
32-bit XP. To get around this, a new thread is created to write the mini
dump when the stack overflows.
- Changed A_Burnination() to be closer to Strife's.
- Fixed: When playing back demos, DoAddBot() can be called without an
associated call to SpawnBot(). So if the bot can't spawn, botnum can
go negative, which will cause problems later in DCajunMaster::Main()
when it sees that wanted_botnum (0) is higher than botnum (-1).
- Fixed: Stopping demo recording in multiplayer games should not abruptly
drop the recorder out of the game without notifying the other players.
In fact, there's no reason why it should drop them out of multiplayer at
all.
- Fixed: Earthquakes were unreliable in multiplayer games because
P_PredictPlayer() did not preserve the player's xviewshift.
- Fixed: PlayerIsGone() needs to stop any scripts that belong to the player
who left, in addition to executing disconnect scripts.
- Fixed: APlayerPawn::AddInventory() should also check for a NULL player->mo
in case the player left but somebody still has a reference to their actor.
- Fixed: DDrawFB::PaintToWindow() should simulate proper unlocking behavior
and set Buffer to NULL.
- Improved feedback for network game initialization with the console ticker.
- Moved i_net.cpp and i_net.h out of sdl/ and win32/ and into the main source
directory. They are identical, so keeping two copies of them is bad.
- Fixed: (At least with Creative's driver's,) EAX settings are global and not
per-application. So if you play a multiplayer ZDoom game on one computer
(or even another EAX-using application), ZDoom needs to restore the
environment when it regains focus.
- Maybe fixed: (See http://forum.zdoom.org/potato.php?t=10689) Apparently,
PacketGet can receive ECONNRESET from nodes that aren't in the game. It
should be safe to just ignore these packets.
- Fixed: PlayerIsGone() should set the gone player's camera to NULL in case
the player who left was player 0. This is because if a remaining player
receives a "recoverable" error, they will become player 0. Once that happens,
they game will try to update sounds through their camera and crash in
FMODSoundRenderer::UpdateListener() because the zones array is now NULL.
G_NewInit() should also clear all the player structures.
SVN r233 (trunk)
- Did some very preliminary support for x64 compiling.
- Now I see why makewad is using the __fastcall calling convention by default:
Because the release zlib is built with it as well.
- Fixed: Conversion from 'const char *' to 'char *' in DEM_SAVEGAME case in
Net_DoCommand().
- Updated the project files for Visual C++ 2005.
SVN r138 (trunk)
functions added to the exit chain with atterm so that they can be called
in a deterministic order and not whatever order the linker decides to put
them in.
- Fixed: DCajunMaster did not free its getspawned.
- Fixed: P_FreeLevelData() did not free ACS scripts.
- Fixed: Level snapshots were not freed at exit.
- Fixed: The save/load menu list was not freed at exit.
- Fixed: FCompressedMemFile needs a destructor to free the m_ImplodedBuffer.
- Fixed: G_DoLoadGame() did not free the engine string.
- Fixed: M_ReadSaveStrings() did not free the engine string.
- Fixed: Processing DEM_SAVEGAME did not free the pathname string.
- Added a check for truncated flats to FFlatTexture::MakeTexture() because
Heretic's F_SKY1 is only four bytes long.
- Added a dump of the offending state to the "Cannot find state..." diagnostic.
- Fixed: FCompressedFile did not initialize m_Mode in its default constructor.
- Fixed: Heretic and Hexen status bars did not initialize ArtiRefresh.
- Fixed: PNGHandle destructor should use delete[] to free TextChunks.
SVN r111 (trunk)
