to be able to save the 3dMidtex attachment info.
- Fixed: The TArray serializer needs to be declared as a friend of TArray
in order to be able to access its fields.
- Since there are no backwards compatibility issues due to savegame version
bumping I closed all gaps in the level flag set.
- Bumped min. Savegame version and Netgame version for 3dMidtex related
changes.
- Changed Jump and Crouch DMFlags into 3-way switches:
0: map default, 1: off, 2: on. Since I needed new bits the rest of
the DMFlag bit values had to be changed as a result.
- fixed: PTR_SlideTraverse didn't check ML_BLOCKMONSTERS for sliding
actors without MF3_NOBLOCKMONST.
- Added MAPINFO commands 'checkswitchrange' and 'nocheckswitchrange'
that can enable or disable switch range checking globally per map.
- Changed ML_3DMIDTEX to force ML_CHECKSWITCHRANGE.
- Added a ML_CHECKSWITCHRANGE flag which allows checking whether the
player can actually reach the switch he wants to use.
- Made DActiveButton::EWhere global so that I can use it outside thr
DActiveButton class.
March 17, 2008 (Changes by Graf Zahl)
- Changed P_LineOpening to pass its result in a struct instead of global
variables.
- Added Eternity's 3DMIDTEX feature (no Eternity code used though.)
It should be feature complete with the exception of the ML_BLOCKMONSTERS
flag handling. That particular part of Eternity's implementation is
sub-optimal because it hijacks an existing flag and doesn't seem to make
much sense to me. Maybe I'll implement it as a separate flag later.
SVN r810 (trunk)
spc_amp from a x.4 fixed point number to a normal float.
- Switched SPC playback from the external SNESAPU.DLL to Blargg's LGPL
snes_spc library. I've compiled it with the fast DSP rather than the
highly accurate one, since I didn't notice a meaningful difference between
the two in my limited testing. In short: SPC playback is now built in to
ZDoom. You don't need to download anything extra to make it work, and it
also works on Linux as well as Windows (though building with Linux is
currently untested).
- Fixed: Stereo separation was calculated very wrongly when in 2D sound mode.
SVN r794 (trunk)
for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update
your SDKs. GCC users, be sure to do a "make cleandep && make clean" before
building, or you will likely get inexplicable errors.
- Fixed: If you wanted to make cleandep with MinGW, you had to specifically
specify Makefile.mingw as the makefile to use.
- Added a normalizer to the OPL synth. It helped bring up the volume a little,
but not nearly as much as I would have liked.
- Removed MIDI Mapper references. It doesn't work with the stream API, and
it doesn't really exist on NT kernels, either.
- Reworked music volume: Except for MIDI, all music volume is controlled
through GSnd and not at the individual song level.
- Removed the mididevice global variable.
- Removed snd_midivolume. Now that all music uses a linear volume scale,
there's no need for two separate music volume controls.
- Increased snd_samplerate default up to 48000.
- Added snd_format, defaulting to "PCM-16".
- Added snd_speakermode, defaulting to "Auto".
- Replaced snd_fpu with snd_resampler, defaulting to "Linear".
- Bumped the snd_channels default up from a pitiful 12 to 32.
- Changed snd_3d default to true. The new cvar snd_hw3d determines if
hardware 3D support is used and default to false.
- Removed the libFLAC source, since FMOD Ex has native FLAC support.
- Removed the altsound code, since it was terribly gimped in comparison to
the FMOD code. It's original purpose was to have been as a springboard for
writing a non-FMOD sound system for Unix-y systems, but that never
happened.
- Finished preliminary FMOD Ex support.
SVN r789 (trunk)
it seems to have a working volume control.
- Renamed music_midi_stream.cpp to music_midi_base.cpp.
- Moved the WinMM MIDI code into a new container class.
SVN r787 (trunk)
class so they all the low-level details of MIDI streaming are kept in
one place.
- Converted the SMF MIDI playback to use the same MIDI streams as MUS
playback.
- Moved MUS playback back into its own thread so that it can continue
uninterrupted if the main thread is too busy to service it in a timely
manner.
- Fixed: The MEVT_* values are not defined shifted into their spot for a
MIDIEVENT, so I need to do it myself.
- Fixed: Pausing a MUS and the changing snd_midivolume caused the paused
notes to become audible.
SVN r784 (trunk)
- Got rid of R_InitPatches because the new texture init code needs to preload
everything to work correctly.
- Rewrote texture manager initialization to order textures primarily by WAD
rather than by type. This way later textures will always override earlier
ones. The only exception is that TEX_MiscPatch are only used as a fallback
if nothing else can be found.
- Optimized the tryany case of FTextureManager::CheckForTexture. It is not
necessary to scan the hash chain twice. The required information can be
retrieved during the first pass as easily and even offers a little more
control.
- Made FFont destructor virtual.
- Added 'Ice' translation to DECORATE.
(Caution: Not fully tested yet!)
SVN r715 (trunk)
error handling.
- Fixed: dehsupp/scanner.re defined "}" as the token RPAREN. dehsupp/parse.y
also defined action_list_def as needing a RBARCE. I'm surprised it worked
at all before. I guess Lemon really was too accepting.
- Changed the way that xlatcc handles include statements so that I don't need
to modify the logic of lempar.c. I also discovered that the grammar was
improperly defined and only accepted the first statement. It worked before
because Lemon used to accept multiple times before reaching the EOF token.
I have also verified that it is still generating the proper lumps.
- Removed some unused wadsrc files from the repository.
- Fixed my re2c upgrade.
- Updated lemon.c to v1.53.
SVN r711 (trunk)
- Added .txt files to the list of types (wad, zip, and pk3) that can be
loaded without listing them after -file.
- Fonts that are created by the ACS setfont command to wrap a texture now
support animated textures.
- FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn
with the hardware 2D path instead of being restricted to the game palette.
- Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1
on a Radeon 9000.
- Added back the off-by-one palette handling, but in a much more limited
scope than before. The skipped entry is assumed to always be at 248, and
it is assumed that all Shader Model 1.4 cards suffer from this. That's
because all SM1.4 cards are based on variants of the ATI R200 core, and the
RV250 in a Radeon 9000 craps up like this. I see no reason to assume that
other flavors of the R200 are any different. (Interesting note: With the
Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the
debug Direct3D 9 runtime, but it works perfectly fine with the retail
Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its
math inside pixel shaders. That would explain perfectly why I can't use
constants greater than 1 with PS1.4 and why it can't do an exact mapping to
every entry in the color palette.
- Fixed: The software shaded drawer did not work for 2D, because its selected
"color"map was replaced with the identitymap before being used.
- Fixed: I cannot use Printf to output messages before the framebuffer was
completely setup, meaning that Shader Model 1.4 cards could not change
resolution.
- I have decided to let remap palettes specify variable alpha values for
their colors. D3DFB no longer forces them to 255.
- Updated re2c to version 0.12.3.
- Fixed: A_Wander used threshold as a timer, when it should have used
reactiontime.
- Fixed: A_CustomRailgun would not fire at all for actors without a target
when the aim parameter was disabled.
- Made the warp command work in multiplayer, again courtesy of Karate Chris.
- Fixed: Trying to spawn a bot while not in a game made for a crashing time.
(Patch courtesy of Karate Chris.)
- Removed some floating point math from hu_scores.cpp that somebody's GCC
gave warnings for (not mine, though).
- Fixed: The SBarInfo drawbar command crashed if the sprite image was
unavailable.
- Fixed: FString::operator=(const char *) did not release its old buffer when
being assigned to the null string.
- The scanner no longer has an upper limit on the length of strings it
accepts, though short strings will be faster than long ones.
- Moved all the text scanning functions into a class. Mainly, this means that
multiple script scanner states can be stored without being forced to do so
recursively. I think I might be taking advantage of that in the near
future. Possibly. Maybe.
- Removed some potential buffer overflows from the decal parser.
- Applied Blzut3's SBARINFO update #9:
* Fixed: When using even length values in drawnumber it would cap to a 98
value instead of a 99 as intended.
* The SBarInfo parser can now accept negatives for coordinates. This
doesn't allow much right now, but later I plan to add better fullscreen
hud support in which the negatives will be more useful. This also cleans
up the source a bit since all calls for (x, y) coordinates are with the
function getCoordinates().
- Added support for stencilling actors.
- Added support for non-black colors specified with DTA_ColorOverlay to the
software renderer.
- Fixed: The inverse, gold, red, and green fixed colormaps each allocated
space for 32 different colormaps, even though each only used the first one.
- Added two new blending flags to make reverse subtract blending more useful:
STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that
gets blended with the background, since that seems like a good idea for
reverse subtraction. They also work with the other two blending operations.
- Added subtract and reverse subtract blending operations to the renderer.
Since the ERenderStyle enumeration was getting rather unwieldy, I converted
it into a new FRenderStyle structure that lets each parameter of the
blending equation be set separately. This simplified the set up for the
blend quite a bit, and it means a number of new combinations are available
by setting the parameters properly.
SVN r710 (trunk)
truncate the coordinates to integers before sending them to the hardware.
Otherwise, there can be one pixel gaps compared to the software renderer,
because the hardware is rounding to nearest but the software renderer is
simply truncating the fractional part of the coordinate. This is the real
cause of the gap above the status bar at 1152x864 (and another gap to the
left of the status bar at 800x500).
- Fixed: When D3DFB::DrawTextureV had to clip a tile, it adjusted the
texture coordinates erroneously, still using the old calculations from
before texture packing was implemented.
SVN r695 (trunk)
will also double as the pistol's icon in the AltHUD.
- Added a generic log display that can show Strife's log messages in all games
regardless of the current game, active status bar and HUD mode.
- Added GZDoom's alt HUD.
SVN r693 (trunk)
a long-abandoned experiment to write directly to video memory instead of
to a temporary buffer in system meroy.
- Added Direct3D versions of the melt and burn screenwipes.
- Fixed the strip sizes for the melt screenwipe to match what Doom would have
produced on a 320x200 screen, rather than producing more, thinner strips
for wider screens.
SVN r659 (trunk)
- Moved the common code of ACS and DECORATE translation generation into the
FRemapTable class.
- Fixed: The DECORATE translation code was not changed for the new data structures.
- Expanded range of ACS and DECORATE translations to 65535.
- Fixed: R_CopyTranslation was not altered for the new functionality.
I removed the function and replaced the one use with a simple assignment.
SVN r644 (trunk)
They are not actually drawn with it yet, nor is it complete, but it's
something to start with.
- Split up DCanvas::DrawTexture() into more pieces to make it easier to
virtualize.
- Removed support for non-32-bit palette textures from D3DFB. What kind of
card supports pixel shaders but not 32-bit textures?
SVN r605 (trunk)
- Updated project files for nasm 2.0, which is now named nasm.exe for the
Windows version, rather than nasmw.exe. Also fixed the annoying new warnings
it generated.
SVN r593 (trunk)
or scripts. ColorSetter (#9038) sets the sector's color and FadeSetter (#9039)
sets the fog color.
- added new flags MF5_ALWAYSFAST and MF5_NEVERFAST. These flags unconditionally
enable or disable fast movement logic, regardless of skill settings.
- added an abstraction layer for skill related settings. This is a preparation
for implementing custom skill definitions but right now all it does is
returning the original values but keeping the related information all in one
place
SVN r557 (trunk)
no longer gets in the way of the main parser.
- Changed A_MissileAttack, A_MeleeAttack and A_ComboAttack so that they use
metadata. Now all the hack code associated with these functions can be removed.
SVN r538 (trunk)
with my changed code.
- Cleaned up DECORATE parser a little - moved the old style parsing code into its
own file and rearranged a few things.
- Made ProcessStates non-static so that it doesn't need to be passed as an argument
to all functions in the DECORATE parser.
- Moved DECORATE parser files into their own subdirectory.
- Optimization: SC_GetToken no longer sets sc_name for identifiers. In most cases
this creates needless overhead by adding a potentially unneeded name to the name
table and looking up the name. In almost all cases where a name is needed it's as
easy to assign sc_String to the name variable.
- Added enum definitions to DECORATE.
SVN r537 (trunk)
powerup.
- Changed: Weapons are no longer checked for the EXTREMEDEATH and NOEXTREMEDEATH flags.
For all damage related actions it will always be the projectile (or puff for hitscan
attacks) that is treated as the damage inflictor.
- Fixed: Hexen's fourth weapons made extreme death depend on the weapon the player
is holding, not the projectile that did the kill. The WIF_EXTREME_DEATH flag
no longer exists as a result.
- Expanded PowerSpeed so that subclasses can be derived that alter the speed factor.
- Added an MF5_USESPECIAL flag that allows using things to execute their specials.
- added MF4_FORCERADIUSDMG flag so that exploding items can be created which
are able to hurt boss monsters.
- moved ML_BLOCK_PLAYERS to the value 0x4000 to bring it in line with Skulltag's
implementation.
SVN r530 (trunk)
.rtext files in the assembly object files. Now I can avoid doing this at
runtime, which means that ZDoom is now UPX-compatible if anyone wants to
pack it.
You will need to do a rebuild or manually delete the old assembly .obj files
for the first build from this revision to succeed, since there are no
changes to the assembly files themselves, and the build process will not be
able to automatically detect that they need to be rebuilt.
SVN r473 (trunk)
when a == 0x80000000, because the result of abs will still be negative as
long as we use signed math.
- Fixed: SafeDivScale31 performed DivScale32 instead.
- Fixed: R_DrawSpanP_ASM had a short jump into a different section.
SVN r472 (trunk)
3 new code pointers without general use it was necessary to handle
GiveDefaultInventory consistently for all players without the need to
subclass this function.
- Added a Player.RunHealth property to expose the StrifePlayer's behavior of
not being able to run when its health is below 10.
- Changed APlayerPawn::GiveDefaultInventory so that it always adds a HexenArmor
and a BasicArmor item to the inventory. If these items are not the first ones
added to the inventory anything else that might absorb damage is not guaranteed
to work consistently because their function depends on the order in the inventory.
- Changed handling of APowerup's DoEffect so that it is called from the owner's
Tick function, not the item's. This is so that the order of execution is
determined by the order in the inventory. When done in the item's Tick function
order depends on the global thinker table which can cause problems with the
order in which conflicting powerups apply their effect. Now it is guaranteed
that the item that was added to the inventory first applies its effect last.
- Fixed: Added checks for Speed==0 to A_Tracer and A_Tracer2 because this could
cause a divide by zero.
- Fixed: P_MoveThing must also set the moved actor's previous position to
prevent interpolation of the move.
- Fixed: APowerInvisibility and its subclasses need to constantly update
the owner's translucency information in case of interference between different
subclasses. Also changed Hexen's Cleric's invulnerability mode to disable
the translucency effect if an invisibility powerup is active.
SVN r448 (trunk)
both named item.
- Switched ddraw.dll to be delay loaded. With D3D9 now being the default
display code, this avoids wasting time loading DDraw if it isn't needed.
- Fixed: The Win32 I_FatalError() did not set alreadyThrown, so it could get
stuck in an endless fatal error loop.
SVN r433 (trunk)
- Renamed the new armor properties to use the same names as Skulltag to avoid
confusion. They still don't need a separate base class as in Skulltag though.
- Added Skulltag-type armor bonus that increases the max amount that can be given
by other armor items.
- Separated all armor related code from a_pickups.cpp into a_armor.cpp.
SVN r427 (trunk)
warnings. At first, I was going to try and clean them all up. Then I decided
that was a worthless cause and went about just acting on the ones that
might actually be helpful:
C4189 (local variable is initialized but not referenced)
C4702 (unreachable code)
C4512 (assignment operator could not be generated)
SVN r420 (trunk)
be surprised if it doesn't work.
- Reorganized the network startup loops so now they are event driven. There is
a single function that gets called to drive it, and it uses callbacks to
perform the different stages of the synchronization. This lets me have a nice,
responsive abort button instead of the previous unannounced hit-escape-to-
abort behavior, and I think the rearranged code is slightly easier to
understand too.
- Increased the number of bytes for version info during D_ArbitrateNetStart(),
in preparation for the day when NETGAMEVERSION requires more than one byte.
- I noticed an issue with Vista RC1 and the new fatal error setup. Even after
releasing a DirectDraw or Direct3D interface, the DWM can still use the
last image drawn using them when it composites the window. It doesn't always
do it but it does often enough that it is a real problem. At this point, I
don't know if it's a problem with the release version of Vista or not.
After messing around, I discovered the problem was caused by ~Win32Video()
hiding the window and then having it immediately shown soon after. The DWM
kept an image of the window to do the transition effect with, and then when
it didn't get a chance to do the transition, it didn't properly forget about
its saved image and kept plastering it on top of everything else
underneath.
- Added a network synchronization panel to the window during netgame startup.
- Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL.
Otherwise, classic DECORATE definitions generate a big, fat crash.
- Resurrected the R_Init progress bar, now as a standard Windows control.
- Removed the sound failure dialog. The FMOD setup already defaulted to no
sound if initialization failed, so this only applies when snd_output is set
to "alternate" which now also falls back to no sound. In addition, it wasn't
working right, and I didn't feel like fixing it for the probably 0% of users
it affected.
- Fixed: The edit control used for logging output added text in reverse order
on Win9x.
- Went back to the roots and made graphics initialization one of the last
things to happen during setup. Now the startup text is visible again. More
importantly, the main window is no longer created invisible, which seems
to cause trouble with it not always appearing in the taskbar. The fatal
error dialog is now also embedded in the main window instead of being a
separate modal dialog, so you can play with the log window to see any
problems that might be reported there.
Rather than completely restoring the original startup order, I tried to
keep things as close to the way they were with early graphics startup. In
particular, V_Init() now creates a dummy screen so that things that need
screen dimensions can get them. It gets replaced by the real screen later
in I_InitGraphics(). Will need to check this under Linux to make sure it
didn't cause any problems there.
- Removed the following stubs that just called functions in Video:
- I_StartModeIterator()
- I_NextMode()
- I_DisplayType()
I_FullscreenChanged() was also removed, and a new fullscreen parameter
was added to IVideo::StartModeIterator(), since that's all it controlled.
- Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's
initialized post-1.22.
SVN r416 (trunk)
monsters
- Added velocity multiplicators to A_SpawnDebris.
- Changed: A_JumpIfNoAmmo should have no effect for CustomInventory items.
- Fixed: DECORATE jump commands must set the call state's result to 0
even when they have to return prematurely.
- Added obituaries for Strife's and Hexen's monsters.
- Converted Strife's Bishop to DECORATE.
- Added momx, momy and momz variables to the DECORATE expression evaluator.
SVN r404 (trunk)
- Added DECORATE support for setting an actor's args. If this is done
it will also disable the actor's special that can be set in a map. This
is for actors that want to use A_CountdownArg or similar functions
that use the args for something different than the special's parameters.
- Converted a_sharedmisc.cpp to DECORATE.
- Added a new NActorIterator that can search for classes specified by name.
- Added a new constructor to TThinkerIterator that can search
for DECORATE defined subclasses that are not represented by a real C++ class.
- Fixed: BuildInfoDefaults must set the parent symbol table so that
all actors can get to the global symbols stored in AActor.
- Fixed some minor inconsistencies in the Arch-Vile's DECORATE definition.
- Fixed: A_VileAttack moved the flame without relinking it into the sector
lists. It also forgot to set the z-position correctly. (original Doom bug.)
- Fixed: The Doom 2 cast finale didn't work with the dynamic state name handling.
SVN r401 (trunk)
not even zvox.wad or the skins directory.
- Minor improvement of Hexen's Demons: They now transfer the translation
to the chunks they spawn so that they look correct if they are color
translated. See Resurrection of Chaos for an example.
- Converted Key gizmos to DECORATE.
- Converted Heretic's Beast (Weredragon) to DECORATE.
- Added a randomness parameter to A_SpawnItemEx. This allows
spawning objects with a random chance without the need to write
complicated A_Jump constructs.
- Converted Heretic's Mummy to DECORATE.
- Converted Hexen's Demons to DECORATE.
SVN r393 (trunk)
- Made the Ettin's and Centaur's howling sound an actor property.
- Added A_CustomComboAttack function to finally have something that can
replace the old A_ComboAttack function.
- Added A_SpawnItemEx function that removes the problems with A_SpawnItem
and which also should make most of the A_CustomMissile abuse unnecessary.
- Added A_QueueCorpse to the list of DECORATE code pointers.
- Made the size of Hexen's corpse queue configurable by CVAR
(sv_corpsequeuesize.) Setting this CVAR to -1 will disable corpse
queuing completely so that even in Hexen all corpses will stay forever.
SVN r392 (trunk)
- Added MissSound parameter to A_CustomMeleeAttack.
- Converted Heretic's Snake (Ophidian) to DECORATE.
- Added an option to A_CustomMissile to jump to the see state if
the caller's target is dead.
- Fixed: A_ThrowGrenade didn't play the missile's spawn sound.
- Added MF_SPAWNSOUNDSOURCE flag so that Raven's missile spawning code
pointers can be recreated with DECORATE.
- Converted a_ravenambient.cpp to DECORATE.
SVN r388 (trunk)
the build process can run uninterrupted under Vista.
- Fixed: DIRECT3DCREATE9FUNC needs WINAPI added to its prototype so that it
works properly in release build, which defaults to __fastcall.
SVN r385 (trunk)
- Made Hexenarmor factors configurable by DECORATE.
- Added support for selecting the invulnerability mode per item as well.
- Made Invulnerability and Healing radius behavior selectable by player
class instead of hard coding the special behavior to the Hexen classes.
SVN r379 (trunk)
- Added VSpeed DECORATE property so that an actor can be given an initial
vertical speed.
- Removed the barrel check in P_DamageMobj. AActor::Die is doing the same
operation unconditionally so this is redundant.
- Added A_BarrelDestroy to the list of DECORATE code pointers so that
the same effect can be recreated for other items as well.
- Renamed A_BarrelRespawn to A_Respawn, changed it so that it works for
monsters and added it to the list of DECORATE code pointers. Now Quake-style
zombies should be possible. ;)
- Changed handling of MF4_RANDOMIZE so that it applies to all actors being
spawned and not just projectiles.
- Converted Berserk and Megasphere to DECORATE.
- Fixed: HealThing should respect the stamina a player has and the Dehacked
health compatibility flag if max is 0. To do that it calls P_GiveBody now.
SVN r373 (trunk)
on the automap instead. If its first argument is zero, the map marker itself
appears on the automap, otherwise it is drawn on top of any actor with a TID
matching that argument. If the second argument is one, then the map marker
will only be appear if the player has previously seen the sector it is one.
You can use Thing_Activate and Thing_Deactivate on markers to turn them on
and off. And if you subclass MapMarker with DECORATE, you can easily make
your own custom markers.
- Fixed: Map markers could not be drawn partially off the map. They were
drawn either fully or not at all.
- Fixed: Map markers appeared in the wrong place on a rotated overlay map if
screenblocks < 10.
SVN r356 (trunk)
- If you aren't targeting x86, m_fixed.h only includes basicinlines.h now.
- Moved x64inlines.h into basicinlines.h.
- Replaced uses of __int64 with types from doomtype.h.
- The stop console command no longer ends single player games, just the demo
that was being recorded.
- In C mode, the sc_man parser no longer allows multi-line string constants
without using the \ character to preface the newline character. This makes
it much easier to diagnose errors where you forget the closing quote of a
string.
- Fixed: V_BreakLines() added the terminating '\0' to the last line of the
input string.
- Added font as a parameter to V_BreakLines and removed its keepspace
parameter, which was never passed as anything other than the default.
SVN r331 (trunk)
- The stat meters now return an FString instead of sprintfing into a fixed
output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
- For consistancy with the other integral types, byte is no longer a
synonym for BYTE.
- Most uses of BOOL have been change to the standard C++ bool type. Those
that weren't were changed to INTBOOL to indicate they may contain values
other than 0 or 1 but are still used as a boolean.
- Compiler-provided types with explicit bit sizes are now used. In
particular, DWORD is no longer a long so it will work with both 64-bit
Windows and Linux.
- Since some files need to include Windows headers, uint32 is a synonym
for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
was all it contained.
SVN r326 (trunk)
The lump is open anyway at that time so deferring this action until the information
is needed doesn't give any speed improvements. Now GetDimensions and all its
associated overhead is gone.
- Added support for TGA textures. It can handle all of the common variations
of this format.
- Changed: GI_PAGESARERAW is no longer checked. It wasn't really necessary before
because the chance of texture misidentification is absolutely minimal.
But raw pages are now restricted to textures of type TEX_MiscPatch only.
- Changed the automap parchment to use a regular texture. The previous
FAutomapTexture is only used as a last resort fallback now. If the code
finds a recognizable graphic it will create a proper texture for it now.
- Fixed: Flats were only auto-scaled when in Doom flat format.
- Fixed: FMultiPatchTexture::CheckForHacks blindly assumed that all patches
were FPstchTextures. Since the texture code does not have any type information
I added a new flag bIsPatch for this purpose.
- Moved all texture classes into their own source files and created a new
subdirectory 'textures' for that.
- Cleaned up the texture management code and added some stricter checks for
the validity of Doom patches. The old code liked to crash when being passed
some non-graphic data.
SVN r300 (trunk)
be a default setting.
- Moved a_artiegg.cpp to g_shared and renamed it to a_morph.cpp to better reflect
its meaning.
- Fixed: AMorphProjectile's PlayerClass and MonsterClass members must be serialized
as FNames. Serializing them as ints is not safe because name indices are not
guaranteed to be the same each time the game is started. Same for APlayerPawn's
MorphWeapon member.
- Converted EggFX, ArtiEgg, PorkFX and ArtiPork to DECORATE.
- Added a new parameter to A_FireCustomMissile. Previously it always aimed
straight ahead and altered the projectile's angle according to the resulting
direction. If the 6th parameter is 1 now it will aim at the specified angle
directly.
- Changed custom morphing to be based on a new MorphProjectile class, not
the Heretic specific EggFX. The EggFX properties are now prefixed with
'MorphProjectile.'.
SVN r297 (trunk)
Christoph Oelckers
Randy Heit