gzdoom/src/sound/fmodsound.cpp

3091 lines
87 KiB
C++
Raw Normal View History

/*
** fmodsound.cpp
** System interface for sound; uses FMOD Ex.
**
**---------------------------------------------------------------------------
** Copyright 1998-2009 Randy Heit
** All rights reserved.
**
** Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions
** are met:
**
** 1. Redistributions of source code must retain the above copyright
** notice, this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright
** notice, this list of conditions and the following disclaimer in the
** documentation and/or other materials provided with the distribution.
** 3. The name of the author may not be used to endorse or promote products
** derived from this software without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**---------------------------------------------------------------------------
**
*/
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// HEADER FILES ------------------------------------------------------------
#ifdef _WIN32
#define WIN32_LEAN_AND_MEAN
#include <windows.h>
#include <mmsystem.h>
extern HWND Window;
#define USE_WINDOWS_DWORD
#else
#define FALSE 0
#define TRUE 1
#endif
#ifdef __APPLE__
#include <stdlib.h>
#elif __sun
#include <alloca.h>
#else
#include <malloc.h>
#endif
#include "templates.h"
#include "fmodsound.h"
#include "c_cvars.h"
#include "i_system.h"
#include "i_music.h"
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
#include "v_text.h"
#include "v_video.h"
#include "v_palette.h"
#include "cmdlib.h"
#include "s_sound.h"
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
#if FMOD_VERSION > 0x42899 && FMOD_VERSION < 0x43800
#error You are trying to compile with an unsupported version of FMOD.
#endif
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// MACROS ------------------------------------------------------------------
// killough 2/21/98: optionally use varying pitched sounds
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
#define PITCH(freq,pitch) (snd_pitched ? ((freq)*(pitch))/128.f : float(freq))
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Just some extra for music and whatever
#define NUM_EXTRA_SOFTWARE_CHANNELS 1
#define MAX_CHANNELS 256
#define SPECTRUM_SIZE 256
#if FMOD_VERSION < 0x43400
#define FMOD_OPENSTATE_PLAYING FMOD_OPENSTATE_STREAMING
#endif
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// TYPES -------------------------------------------------------------------
struct FEnumList
{
const char *Name;
int Value;
};
// EXTERNAL FUNCTION PROTOTYPES --------------------------------------------
// PUBLIC FUNCTION PROTOTYPES ----------------------------------------------
// PRIVATE FUNCTION PROTOTYPES ---------------------------------------------
static int Enum_NumForName(const FEnumList *list, const char *name);
static const char *Enum_NameForNum(const FEnumList *list, int num);
// EXTERNAL DATA DECLARATIONS ----------------------------------------------
EXTERN_CVAR (String, snd_output)
EXTERN_CVAR (Float, snd_sfxvolume)
EXTERN_CVAR (Float, snd_musicvolume)
EXTERN_CVAR (Int, snd_buffersize)
EXTERN_CVAR (Int, snd_samplerate)
EXTERN_CVAR (Bool, snd_pitched)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
EXTERN_CVAR (Int, snd_channels)
extern int sfx_empty;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// PUBLIC DATA DEFINITIONS -------------------------------------------------
ReverbContainer *ForcedEnvironment;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
CVAR (Int, snd_driver, 0, CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
CVAR (Int, snd_buffercount, 0, CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
CVAR (Bool, snd_hrtf, false, CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
CVAR (Bool, snd_waterreverb, true, CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
CVAR (String, snd_resampler, "Linear", CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
CVAR (String, snd_speakermode, "Auto", CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
CVAR (String, snd_output_format, "PCM-16", CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
CVAR (Bool, snd_profile, false, 0)
CVAR (String, snd_midipatchset, "", CVAR_ARCHIVE|CVAR_GLOBALCONFIG);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Underwater low-pass filter cutoff frequency. Set to 0 to disable the filter.
CUSTOM_CVAR (Float, snd_waterlp, 250, CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
{
// Clamp to the DSP unit's limits.
if (*self < 10 && *self != 0)
{
self = 10;
}
else if (*self > 22000)
{
self = 22000;
}
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// PRIVATE DATA DEFINITIONS ------------------------------------------------
static const ReverbContainer *PrevEnvironment;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
static bool ShowedBanner;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// The rolloff callback is called during FMOD::Sound::play, so we need this
// global variable to contain the sound info during that time for the
// callback.
static FRolloffInfo *GRolloff;
static float GDistScale;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// In the below lists, duplicate entries are for user selection. When
// queried, only the first one for the particular value is shown.
static const FEnumList OutputNames[] =
{
{ "Auto", FMOD_OUTPUTTYPE_AUTODETECT },
{ "Default", FMOD_OUTPUTTYPE_AUTODETECT },
{ "No sound", FMOD_OUTPUTTYPE_NOSOUND },
// Windows
{ "DirectSound", FMOD_OUTPUTTYPE_DSOUND },
{ "DSound", FMOD_OUTPUTTYPE_DSOUND },
{ "Windows Multimedia", FMOD_OUTPUTTYPE_WINMM },
{ "WinMM", FMOD_OUTPUTTYPE_WINMM },
{ "WaveOut", FMOD_OUTPUTTYPE_WINMM },
#if FMOD_VERSION < 0x43400
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{ "OpenAL", FMOD_OUTPUTTYPE_OPENAL },
#endif
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{ "WASAPI", FMOD_OUTPUTTYPE_WASAPI },
{ "ASIO", FMOD_OUTPUTTYPE_ASIO },
// Linux
{ "OSS", FMOD_OUTPUTTYPE_OSS },
{ "ALSA", FMOD_OUTPUTTYPE_ALSA },
{ "ESD", FMOD_OUTPUTTYPE_ESD },
#if FMOD_VERSION >= 0x43400
{ "PulseAudio", FMOD_OUTPUTTYPE_PULSEAUDIO },
{ "Pulse", FMOD_OUTPUTTYPE_PULSEAUDIO },
#endif
{ "SDL", 666 },
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Mac
#if FMOD_VERSION < 0x43000
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{ "Sound Manager", FMOD_OUTPUTTYPE_SOUNDMANAGER },
#endif
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{ "Core Audio", FMOD_OUTPUTTYPE_COREAUDIO },
{ NULL, 0 }
};
static const FEnumList SpeakerModeNames[] =
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{ "Mono", FMOD_SPEAKERMODE_MONO },
{ "Stereo", FMOD_SPEAKERMODE_STEREO },
{ "Quad", FMOD_SPEAKERMODE_QUAD },
{ "Surround", FMOD_SPEAKERMODE_SURROUND },
{ "5.1", FMOD_SPEAKERMODE_5POINT1 },
{ "7.1", FMOD_SPEAKERMODE_7POINT1 },
#if FMOD_VERSION < 0x44400
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{ "Prologic", FMOD_SPEAKERMODE_PROLOGIC },
#endif
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{ "1", FMOD_SPEAKERMODE_MONO },
{ "2", FMOD_SPEAKERMODE_STEREO },
{ "4", FMOD_SPEAKERMODE_QUAD },
{ NULL, 0 }
};
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
static const FEnumList ResamplerNames[] =
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{ "No Interpolation", FMOD_DSP_RESAMPLER_NOINTERP },
{ "NoInterp", FMOD_DSP_RESAMPLER_NOINTERP },
{ "Linear", FMOD_DSP_RESAMPLER_LINEAR },
{ "Cubic", FMOD_DSP_RESAMPLER_CUBIC },
{ "Spline", FMOD_DSP_RESAMPLER_SPLINE },
{ NULL, 0 }
};
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
static const FEnumList SoundFormatNames[] =
{
{ "None", FMOD_SOUND_FORMAT_NONE },
{ "PCM-8", FMOD_SOUND_FORMAT_PCM8 },
{ "PCM-16", FMOD_SOUND_FORMAT_PCM16 },
{ "PCM-24", FMOD_SOUND_FORMAT_PCM24 },
{ "PCM-32", FMOD_SOUND_FORMAT_PCM32 },
{ "PCM-Float", FMOD_SOUND_FORMAT_PCMFLOAT },
{ "GCADPCM", FMOD_SOUND_FORMAT_GCADPCM },
{ "IMAADPCM", FMOD_SOUND_FORMAT_IMAADPCM },
{ "VAG", FMOD_SOUND_FORMAT_VAG },
{ "XMA", FMOD_SOUND_FORMAT_XMA },
{ "MPEG", FMOD_SOUND_FORMAT_MPEG },
{ NULL, 0 }
};
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
static const char *OpenStateNames[] =
{
"Ready",
"Loading",
"Error",
"Connecting",
"Buffering",
"Seeking",
"Streaming"
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
};
const FMODSoundRenderer::spk FMODSoundRenderer::SpeakerNames4[4] = { "L", "R", "BL", "BR" };
const FMODSoundRenderer::spk FMODSoundRenderer::SpeakerNamesMore[8] = { "L", "R", "C", "LFE", "BL", "BR", "SL", "SR" };
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// CODE --------------------------------------------------------------------
//==========================================================================
//
// Enum_NumForName
//
// Returns the value of an enum name, or -1 if not found.
//
//==========================================================================
static int Enum_NumForName(const FEnumList *list, const char *name)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
while (list->Name != NULL)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (stricmp(list->Name, name) == 0)
{
return list->Value;
}
list++;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return -1;
}
//==========================================================================
//
// Enum_NameForNum
//
// Returns the name of an enum value. If there is more than one name for a
// value, on the first one in the list is returned. Returns NULL if there
// was no match.
//
//==========================================================================
static const char *Enum_NameForNum(const FEnumList *list, int num)
{
while (list->Name != NULL)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (list->Value == num)
{
return list->Name;
}
list++;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return NULL;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
//==========================================================================
//
// The container for a streaming FMOD::Sound, for playing music.
//
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
//==========================================================================
class FMODStreamCapsule : public SoundStream
{
public:
FMODStreamCapsule(FMOD::Sound *stream, FMODSoundRenderer *owner, const char *url)
: Owner(owner), Stream(NULL), Channel(NULL),
UserData(NULL), Callback(NULL), URL(url), Ended(false)
{
SetStream(stream);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMODStreamCapsule(void *udata, SoundStreamCallback callback, FMODSoundRenderer *owner)
: Owner(owner), Stream(NULL), Channel(NULL),
UserData(udata), Callback(callback), Ended(false)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
~FMODStreamCapsule()
{
if (Channel != NULL)
{
Channel->stop();
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Stream != NULL)
{
Stream->release();
}
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void SetStream(FMOD::Sound *stream)
{
float frequency;
Stream = stream;
// As this interface is for music, make it super-high priority.
if (FMOD_OK == stream->getDefaults(&frequency, NULL, NULL, NULL))
{
stream->setDefaults(frequency, 1, 0, 0);
}
}
bool Play(bool looping, float volume)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
if (URL.IsNotEmpty())
{ // Net streams cannot be looped, because they cannot be seeked.
looping = false;
}
Stream->setMode((looping ? FMOD_LOOP_NORMAL : FMOD_LOOP_OFF) | FMOD_SOFTWARE | FMOD_2D);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = Owner->Sys->playSound(FMOD_CHANNEL_FREE, Stream, true, &Channel);
if (result != FMOD_OK)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Channel->setChannelGroup(Owner->MusicGroup);
Channel->setSpeakerMix(1, 1, 1, 1, 1, 1, 1, 1);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Channel->setVolume(volume);
// Ensure reverb is disabled.
FMOD_REVERB_CHANNELPROPERTIES reverb = { 0, };
if (FMOD_OK == Channel->getReverbProperties(&reverb))
{
reverb.Room = -10000;
Channel->setReverbProperties(&reverb);
}
Channel->setPaused(false);
Ended = false;
JustStarted = true;
Starved = false;
Loop = looping;
Volume = volume;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return true;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void Stop()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Channel != NULL)
{
Channel->stop();
Channel = NULL;
}
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
bool SetPaused(bool paused)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Channel != NULL)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return FMOD_OK == Channel->setPaused(paused);
}
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
unsigned int GetPosition()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
unsigned int pos;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Channel != NULL && FMOD_OK == Channel->getPosition(&pos, FMOD_TIMEUNIT_MS))
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return pos;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return 0;
}
bool IsEnded()
{
bool is;
FMOD_OPENSTATE openstate = FMOD_OPENSTATE_MAX;
bool starving;
#if FMOD_VERSION >= 0x43400
bool diskbusy;
#endif
if (Stream == NULL)
{
return true;
}
#if FMOD_VERSION < 0x43400
if (FMOD_OK != Stream->getOpenState(&openstate, NULL, &starving))
#else
if (FMOD_OK != Stream->getOpenState(&openstate, NULL, &starving, &diskbusy))
#endif
{
openstate = FMOD_OPENSTATE_ERROR;
}
if (openstate == FMOD_OPENSTATE_ERROR)
{
if (Channel != NULL)
{
Channel->stop();
Channel = NULL;
}
return true;
}
if (Channel != NULL && (FMOD_OK != Channel->isPlaying(&is) || is == false))
{
return true;
}
if (Ended)
{
Channel->stop();
Channel = NULL;
return true;
}
if (URL.IsNotEmpty() && !JustStarted && openstate == FMOD_OPENSTATE_READY)
{
// Reconnect the stream, since it seems to have stalled.
// The only way to do this appears to be to completely recreate it.
FMOD_RESULT result;
Channel->stop();
Stream->release();
Channel = NULL;
Stream = NULL;
Owner->Sys->setStreamBufferSize(64*1024, FMOD_TIMEUNIT_RAWBYTES);
// Open the stream asynchronously, so we don't hang the game while trying to reconnect.
// (It would be nice to do the initial open asynchronously as well, but I'd need to rethink
// the music system design to pull that off.)
result = Owner->Sys->createSound(URL, (Loop ? FMOD_LOOP_NORMAL : FMOD_LOOP_OFF) | FMOD_SOFTWARE | FMOD_2D |
FMOD_CREATESTREAM | FMOD_NONBLOCKING, NULL, &Stream);
JustStarted = true;
Owner->Sys->setStreamBufferSize(16*1024, FMOD_TIMEUNIT_RAWBYTES);
return result != FMOD_OK;
}
if (JustStarted && openstate == FMOD_OPENSTATE_PLAYING)
{
JustStarted = false;
}
if (JustStarted && Channel == NULL && openstate == FMOD_OPENSTATE_READY)
{
return !Play(Loop, Volume);
}
if (starving != Starved)
{ // Mute the sound if it's starving.
Channel->setVolume(starving ? 0 : Volume);
Starved = starving;
}
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void SetVolume(float volume)
{
if (Channel != NULL && !Starved)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Channel->setVolume(volume);
}
Volume = volume;
}
// Sets the position in ms.
bool SetPosition(unsigned int ms_pos)
{
return FMOD_OK == Channel->setPosition(ms_pos, FMOD_TIMEUNIT_MS);
}
// Sets the order number for MOD formats.
bool SetOrder(int order_pos)
{
return FMOD_OK == Channel->setPosition(order_pos, FMOD_TIMEUNIT_MODORDER);
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
FString GetStats()
{
FString stats;
FMOD_OPENSTATE openstate;
unsigned int percentbuffered;
unsigned int position;
bool starving;
#if FMOD_VERSION >= 0x43400
bool diskbusy;
#endif
float volume;
float frequency;
bool paused;
bool isplaying;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
#if FMOD_VERSION < 0x43400
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (FMOD_OK == Stream->getOpenState(&openstate, &percentbuffered, &starving))
#else
if (FMOD_OK == Stream->getOpenState(&openstate, &percentbuffered, &starving, &diskbusy))
#endif
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
{
stats = (openstate <= FMOD_OPENSTATE_PLAYING ? OpenStateNames[openstate] : "Unknown state");
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
stats.AppendFormat(",%3d%% buffered, %s", percentbuffered, starving ? "Starving" : "Well-fed");
}
if (Channel == NULL)
{
stats += ", not playing";
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (Channel != NULL && FMOD_OK == Channel->getPosition(&position, FMOD_TIMEUNIT_MS))
{
stats.AppendFormat(", %d", position);
if (FMOD_OK == Stream->getLength(&position, FMOD_TIMEUNIT_MS))
{
stats.AppendFormat("/%d", position);
}
stats += " ms";
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
}
if (Channel != NULL && FMOD_OK == Channel->getVolume(&volume))
{
stats.AppendFormat(", %d%%", int(volume * 100));
}
if (Channel != NULL && FMOD_OK == Channel->getPaused(&paused) && paused)
{
stats += ", paused";
}
if (Channel != NULL && FMOD_OK == Channel->isPlaying(&isplaying) && isplaying)
{
stats += ", playing";
}
if (Channel != NULL && FMOD_OK == Channel->getFrequency(&frequency))
{
stats.AppendFormat(", %g Hz", frequency);
}
if (JustStarted)
{
stats += " JS";
}
if (Ended)
{
stats += " XX";
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
return stats;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
static FMOD_RESULT F_CALLBACK PCMReadCallback(FMOD_SOUND *sound, void *data, unsigned int datalen)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
FMODStreamCapsule *self;
result = ((FMOD::Sound *)sound)->getUserData((void **)&self);
if (result != FMOD_OK || self == NULL || self->Callback == NULL || self->Ended)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{
// Contrary to the docs, this return value is completely ignored.
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return FMOD_OK;
}
if (!self->Callback(self, data, datalen, self->UserData))
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{
self->Ended = true;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
}
return FMOD_OK;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
static FMOD_RESULT F_CALLBACK PCMSetPosCallback(FMOD_SOUND *sound, int subsound, unsigned int position, FMOD_TIMEUNIT postype)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// This is useful if the user calls Channel::setPosition and you want
// to seek your data accordingly.
return FMOD_OK;
}
private:
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMODSoundRenderer *Owner;
FMOD::Sound *Stream;
FMOD::Channel *Channel;
void *UserData;
SoundStreamCallback Callback;
FString URL;
bool Ended;
bool JustStarted;
bool Starved;
bool Loop;
float Volume;
};
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
//==========================================================================
//
// The interface the game uses to talk to FMOD.
//
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMODSoundRenderer::FMODSoundRenderer()
{
InitSuccess = Init();
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMODSoundRenderer::~FMODSoundRenderer()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Shutdown();
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
bool FMODSoundRenderer::IsValid()
{
return InitSuccess;
}
#ifdef _MSC_VER
//==========================================================================
//
// CheckException
//
//==========================================================================
#define FACILITY_VISUALCPP ((LONG)0x6d)
#define VcppException(sev,err) ((sev) | (FACILITY_VISUALCPP<<16) | err)
static int CheckException(DWORD code)
{
if (code == VcppException(ERROR_SEVERITY_ERROR,ERROR_MOD_NOT_FOUND) ||
code == VcppException(ERROR_SEVERITY_ERROR,ERROR_PROC_NOT_FOUND))
{
return EXCEPTION_EXECUTE_HANDLER;
}
return EXCEPTION_CONTINUE_SEARCH;
}
#endif
//==========================================================================
//
// FMODSoundRenderer :: Init
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
bool FMODSoundRenderer::Init()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
unsigned int version;
FMOD_SPEAKERMODE speakermode;
FMOD_SOUND_FORMAT format;
FMOD_DSP_RESAMPLER resampler;
FMOD_INITFLAGS initflags;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
int samplerate;
int driver;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
int eval;
SFXPaused = 0;
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
DSPLocked = false;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
MusicGroup = NULL;
SfxGroup = NULL;
PausableSfx = NULL;
SfxConnection = NULL;
WaterLP = NULL;
WaterReverb = NULL;
PrevEnvironment = DefaultEnvironments[0];
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
DSPClock.AsOne = 0;
ChannelGroupTargetUnit = NULL;
ChannelGroupTargetUnitOutput = NULL;
SfxReverbHooked = false;
SfxReverbPlaceholder = NULL;
OutputPlugin = 0;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
Printf("I_InitSound: Initializing FMOD\n");
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Create a System object and initialize.
#ifdef _MSC_VER
__try {
#endif
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = FMOD::System_Create(&Sys);
#ifdef _MSC_VER
}
__except(CheckException(GetExceptionCode()))
{
Sys = NULL;
Printf(TEXTCOLOR_ORANGE"Failed to load fmodex"
#ifdef _WIN64
"64"
#endif
".dll\n");
return false;
}
#endif
if (result != FMOD_OK)
{
Sys = NULL;
Printf(TEXTCOLOR_ORANGE"Failed to create FMOD system object: Error %d\n", result);
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = Sys->getVersion(&version);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_ORANGE"Could not validate FMOD version: Error %d\n", result);
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
const char *wrongver = NULL;
#if FMOD_VERSION >= 0x43800
if (version < 0x43800)
#else
if (version < 0x42000)
#endif
{
wrongver = "an old";
}
#if FMOD_VERSION < 0x42700
else if ((version & 0xFFFF00) > 0x42600)
#else
else if ((version & 0xFFFF00) > (FMOD_VERSION & 0xFFFF00))
#endif
{
wrongver = "a new";
}
if (wrongver != NULL)
{
Printf (" " TEXTCOLOR_ORANGE "Error! You are using %s version of FMOD (%x.%02x.%02x).\n"
" " TEXTCOLOR_ORANGE "This program was built for version %x.%02x.%02x\n",
wrongver,
version >> 16, (version >> 8) & 255, version & 255,
FMOD_VERSION >> 16, (FMOD_VERSION >> 8) & 255, FMOD_VERSION & 255);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return false;
}
ActiveFMODVersion = version;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (!ShowedBanner)
{
// '\xa9' is the copyright symbol in the Windows-1252 code page.
Printf("FMOD Sound System, copyright \xa9 Firelight Technologies Pty, Ltd., 1994-2009.\n");
Printf("Loaded FMOD version %x.%02x.%02x\n", version >> 16, (version >> 8) & 255, version & 255);
ShowedBanner = true;
}
#ifdef _WIN32
if (OSPlatform == os_WinNT4)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// The following was true as of FMOD 3. I don't know if it still
// applies to FMOD Ex, nor do I have an NT 4 install anymore, but
// there's no reason to get rid of it yet.
//
// If running Windows NT 4, we need to initialize DirectSound before
// using WinMM. If we don't, then FSOUND_Close will corrupt a
// heap. This might just be the Audigy's drivers--I don't know why
// it happens. At least the fix is simple enough. I only need to
// initialize DirectSound once, and then I can initialize/close
// WinMM as many times as I want.
//
// Yes, using WinMM under NT 4 is a good idea. I can get latencies as
// low as 20 ms with WinMM, but with DirectSound I need to have the
// latency as high as 120 ms to avoid crackling--quite the opposite
// from the other Windows versions with real DirectSound support.
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
static bool inited_dsound = false;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (!inited_dsound)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Sys->setOutput(FMOD_OUTPUTTYPE_DSOUND) == FMOD_OK)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Sys->init(1, FMOD_INIT_NORMAL, 0) == FMOD_OK)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
inited_dsound = true;
Sleep(50);
Sys->close();
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Sys->setOutput(FMOD_OUTPUTTYPE_WINMM);
}
}
}
#endif
#ifndef _WIN32
// Try to load SDL output plugin
result = Sys->setPluginPath(progdir); // Should we really look for it in the program directory?
result = Sys->loadPlugin("liboutput_sdl.so", &OutputPlugin);
if (result != FMOD_OK)
{
OutputPlugin = 0;
}
#endif
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Set the user specified output mode.
eval = Enum_NumForName(OutputNames, snd_output);
if (eval >= 0)
{
if (eval == 666 && OutputPlugin != 0)
{
result = Sys->setOutputByPlugin(OutputPlugin);
}
else
{
result = Sys->setOutput(FMOD_OUTPUTTYPE(eval));
}
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE"Setting output type '%s' failed. Using default instead. (Error %d)\n", *snd_output, result);
eval = FMOD_OUTPUTTYPE_AUTODETECT;
Sys->setOutput(FMOD_OUTPUTTYPE_AUTODETECT);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
result = Sys->getNumDrivers(&driver);
#ifdef __unix__
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (result == FMOD_OK)
{
// On Linux, FMOD defaults to OSS. If OSS is not present, it doesn't
// try ALSA; it just fails. We'll try for it, but only if OSS wasn't
// explicitly specified for snd_output.
if (driver == 0 && eval == FMOD_OUTPUTTYPE_AUTODETECT)
{
FMOD_OUTPUTTYPE output;
if (FMOD_OK == Sys->getOutput(&output))
{
if (output == FMOD_OUTPUTTYPE_OSS)
{
Printf(TEXTCOLOR_BLUE"OSS could not be initialized. Trying ALSA.\n");
Sys->setOutput(FMOD_OUTPUTTYPE_ALSA);
result = Sys->getNumDrivers(&driver);
}
}
}
}
#endif
if (result == FMOD_OK)
{
if (driver == 0)
{
Printf(TEXTCOLOR_ORANGE"No working sound devices found. Try a different snd_output?\n");
return false;
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (snd_driver >= driver)
{
Printf(TEXTCOLOR_BLUE"Driver %d does not exist. Using 0.\n", *snd_driver);
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
driver = 0;
}
else
{
driver = snd_driver;
}
result = Sys->setDriver(driver);
}
result = Sys->getDriver(&driver);
#if FMOD_VERSION >= 0x43700
// We were built with an FMOD that only returns the control panel frequency
result = Sys->getDriverCaps(driver, &Driver_Caps, &Driver_MinFrequency, &speakermode);
Driver_MaxFrequency = Driver_MinFrequency;
#else
// We were built with an FMOD that returns a frequency range
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
result = Sys->getDriverCaps(driver, &Driver_Caps, &Driver_MinFrequency, &Driver_MaxFrequency, &speakermode);
#endif
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE"Could not ascertain driver capabilities. Some things may be weird. (Error %d)\n", result);
// Fill in some default to pretend it worked. (But as long as we specify a valid driver,
// can this call actually fail?)
Driver_Caps = 0;
Driver_MinFrequency = 4000;
Driver_MaxFrequency = 48000;
speakermode = FMOD_SPEAKERMODE_STEREO;
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
// Set the user selected speaker mode.
eval = Enum_NumForName(SpeakerModeNames, snd_speakermode);
if (eval >= 0)
{
speakermode = FMOD_SPEAKERMODE(eval);
}
result = Sys->setSpeakerMode(speakermode);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE"Could not set speaker mode to '%s'. (Error %d)\n", *snd_speakermode, result);
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
// Set software format
eval = Enum_NumForName(SoundFormatNames, snd_output_format);
format = eval >= 0 ? FMOD_SOUND_FORMAT(eval) : FMOD_SOUND_FORMAT_PCM16;
eval = Enum_NumForName(ResamplerNames, snd_resampler);
resampler = eval >= 0 ? FMOD_DSP_RESAMPLER(eval) : FMOD_DSP_RESAMPLER_LINEAR;
// These represented the frequency limits for hardware channels, which we never used anyway.
// samplerate = clamp<int>(snd_samplerate, Driver_MinFrequency, Driver_MaxFrequency);
samplerate = snd_samplerate;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (samplerate == 0 || snd_samplerate == 0)
{ // Creative's ASIO drivers report the only supported frequency as 0!
if (FMOD_OK != Sys->getSoftwareFormat(&samplerate, NULL, NULL, NULL, NULL, NULL))
{
samplerate = 48000;
}
}
if (samplerate != snd_samplerate && snd_samplerate != 0)
{
Printf(TEXTCOLOR_BLUE"Sample rate %d is unsupported. Trying %d.\n", *snd_samplerate, samplerate);
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
}
result = Sys->setSoftwareFormat(samplerate, format, 0, 0, resampler);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE"Could not set mixing format. Defaults will be used. (Error %d)\n", result);
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
// Set software channels according to snd_channels
result = Sys->setSoftwareChannels(snd_channels + NUM_EXTRA_SOFTWARE_CHANNELS);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE"Failed to set the preferred number of channels. (Error %d)\n", result);
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Driver_Caps & FMOD_CAPS_HARDWARE_EMULATED)
{ // The user has the 'Acceleration' slider set to off!
// This is really bad for latency!
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
Printf (TEXTCOLOR_BLUE"Warning: The sound acceleration slider has been set to off.\n");
Printf (TEXTCOLOR_BLUE"Please turn it back on if you want decent sound.\n");
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = Sys->setDSPBufferSize(1024, 10); // At 48khz, the latency between issuing an fmod command and hearing it will now be about 213ms.
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
else if (snd_buffersize != 0 || snd_buffercount != 0)
{
int buffersize = snd_buffersize ? snd_buffersize : 1024;
int buffercount = snd_buffercount ? snd_buffercount : 4;
result = Sys->setDSPBufferSize(buffersize, buffercount);
}
else
{
result = FMOD_OK;
}
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE"Setting DSP buffer size failed. (Error %d)\n", result);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Try to init
initflags = FMOD_INIT_NORMAL;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (snd_hrtf)
{
// These flags are the same thing, just with different names.
#ifdef FMOD_INIT_SOFTWARE_HRTF
initflags |= FMOD_INIT_SOFTWARE_HRTF;
#else
initflags |= FMOD_INIT_HRTF_LOWPASS;
#endif
}
if (snd_profile)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{
initflags |= FMOD_INIT_ENABLE_PROFILE;
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
for (;;)
{
result = Sys->init(MAX(*snd_channels, MAX_CHANNELS), initflags, 0);
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (result == FMOD_ERR_OUTPUT_CREATEBUFFER)
{
// Possible causes of a buffer creation failure:
// 1. The speaker mode selected isn't supported by this soundcard. Force it to stereo.
// 2. The output format is unsupported. Force it to 16-bit PCM.
// 3. ???
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
result = Sys->getSpeakerMode(&speakermode);
if (result == FMOD_OK &&
speakermode != FMOD_SPEAKERMODE_STEREO &&
FMOD_OK == Sys->setSpeakerMode(FMOD_SPEAKERMODE_STEREO))
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
{
Printf(TEXTCOLOR_RED" Buffer creation failed. Retrying with stereo output.\n");
continue;
}
result = Sys->getSoftwareFormat(&samplerate, &format, NULL, NULL, &resampler, NULL);
if (result == FMOD_OK &&
format != FMOD_SOUND_FORMAT_PCM16 &&
FMOD_OK == Sys->setSoftwareFormat(samplerate, FMOD_SOUND_FORMAT_PCM16, 0, 0, resampler))
{
Printf(TEXTCOLOR_RED" Buffer creation failed. Retrying with PCM-16 output.\n");
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
continue;
}
}
else if (result == FMOD_ERR_NET_SOCKET_ERROR && (initflags & FMOD_INIT_ENABLE_PROFILE))
{
Printf(TEXTCOLOR_RED" Could not create socket. Retrying without profiling.\n");
initflags &= ~FMOD_INIT_ENABLE_PROFILE;
continue;
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
#ifdef _WIN32
else if (result == FMOD_ERR_OUTPUT_INIT)
{
FMOD_OUTPUTTYPE output;
result = Sys->getOutput(&output);
if (result == FMOD_OK && output != FMOD_OUTPUTTYPE_DSOUND)
{
Printf(TEXTCOLOR_BLUE" Init failed for output type %s. Retrying with DirectSound.\n",
Enum_NameForNum(OutputNames, output));
if (FMOD_OK == Sys->setOutput(FMOD_OUTPUTTYPE_DSOUND))
{
continue;
}
}
}
#endif
break;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
}
if (result != FMOD_OK)
{ // Initializing FMOD failed. Cry cry.
Printf(TEXTCOLOR_ORANGE" System::init returned error code %d\n", result);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return false;
}
// Create channel groups
result = Sys->createChannelGroup("Music", &MusicGroup);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_ORANGE" Could not create music channel group. (Error %d)\n", result);
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = Sys->createChannelGroup("SFX", &SfxGroup);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_ORANGE" Could not create sfx channel group. (Error %d)\n", result);
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = Sys->createChannelGroup("Pausable SFX", &PausableSfx);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_ORANGE" Could not create pausable sfx channel group. (Error %d)\n", result);
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = SfxGroup->addGroup(PausableSfx);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE" Could not attach pausable sfx to sfx channel group. (Error %d)\n", result);
}
// Create DSP units for underwater effect
#if FMOD_VERSION < 0x43701
result = Sys->createDSPByType(FMOD_DSP_TYPE_LOWPASS, &WaterLP);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE" Could not create underwater lowpass unit. (Error %d)\n", result);
}
else
{
result = Sys->createDSPByType(FMOD_DSP_TYPE_REVERB, &WaterReverb);
if (result != FMOD_OK)
{
Printf(TEXTCOLOR_BLUE" Could not create underwater reverb unit. (Error %d)\n", result);
}
}
#else
result = FMOD_ERR_UNSUPPORTED;
#endif
// Connect underwater DSP unit between PausableSFX and SFX groups, while
// retaining the connection established by SfxGroup->addGroup().
if (WaterLP != NULL)
{
FMOD::DSP *sfx_head, *pausable_head;
result = SfxGroup->getDSPHead(&sfx_head);
if (result == FMOD_OK)
{
result = sfx_head->getInput(0, &pausable_head, &SfxConnection);
if (result == FMOD_OK)
{
// The placeholder mixer is for reference to where to connect the SFX
// reverb unit once it gets created.
result = Sys->createDSPByType(FMOD_DSP_TYPE_MIXER, &SfxReverbPlaceholder);
if (result == FMOD_OK)
{
// Replace the PausableSFX->SFX connection with
// PausableSFX->ReverbPlaceholder->SFX.
result = SfxReverbPlaceholder->addInput(pausable_head, NULL);
if (result == FMOD_OK)
{
FMOD::DSPConnection *connection;
result = sfx_head->addInput(SfxReverbPlaceholder, &connection);
if (result == FMOD_OK)
{
sfx_head->disconnectFrom(pausable_head);
SfxReverbPlaceholder->setActive(true);
SfxReverbPlaceholder->setBypass(true);
// The placeholder now takes the place of the pausable_head
// for the following connections.
pausable_head = SfxReverbPlaceholder;
SfxConnection = connection;
}
}
else
{
SfxReverbPlaceholder->release();
SfxReverbPlaceholder = NULL;
}
}
result = WaterLP->addInput(pausable_head, NULL);
WaterLP->setActive(false);
WaterLP->setParameter(FMOD_DSP_LOWPASS_CUTOFF, snd_waterlp);
WaterLP->setParameter(FMOD_DSP_LOWPASS_RESONANCE, 2);
#if FMOD_VERSION < 0x43701
if (WaterReverb != NULL)
{
FMOD::DSPConnection *dry;
result = WaterReverb->addInput(pausable_head, &dry);
if (result == FMOD_OK)
{
result = dry->setMix(0.1f);
if (result == FMOD_OK)
{
result = WaterReverb->addInput(WaterLP, NULL);
if (result == FMOD_OK)
{
result = sfx_head->addInput(WaterReverb, NULL);
if (result == FMOD_OK)
{
WaterReverb->setParameter(FMOD_DSP_REVERB_ROOMSIZE, 0.001f);
WaterReverb->setParameter(FMOD_DSP_REVERB_DAMP, 0.2f);
WaterReverb->setActive(false);
}
}
}
}
}
else
#endif
{
result = sfx_head->addInput(WaterLP, NULL);
}
}
}
}
LastWaterLP = snd_waterlp;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Find the FMOD Channel Group Target Unit. To completely eliminate sound
// while the program is deactivated, we can deactivate this DSP unit, and
// all audio processing will cease. This is not directly exposed by the
// API but can be easily located by getting the master channel group and
// tracing its single output, since it is known to hook up directly to the
// Channel Group Target Unit. (See FMOD Profiler for proof.)
FMOD::ChannelGroup *master_group;
result = Sys->getMasterChannelGroup(&master_group);
if (result == FMOD_OK)
{
FMOD::DSP *master_head;
result = master_group->getDSPHead(&master_head);
if (result == FMOD_OK)
{
result = master_head->getOutput(0, &ChannelGroupTargetUnit, NULL);
if (result != FMOD_OK)
{
ChannelGroupTargetUnit = NULL;
}
else
{
FMOD::DSP *dontcare;
result = ChannelGroupTargetUnit->getOutput(0, &dontcare, &ChannelGroupTargetUnitOutput);
if (result != FMOD_OK)
{
ChannelGroupTargetUnitOutput = NULL;
}
}
}
}
if (FMOD_OK != Sys->getSoftwareFormat(&OutputRate, NULL, NULL, NULL, NULL, NULL))
{
OutputRate = 48000; // Guess, but this should never happen.
}
Sys->set3DSettings(0.5f, 96.f, 1.f);
Sys->set3DRolloffCallback(RolloffCallback);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
snd_sfxvolume.Callback ();
return true;
}
//==========================================================================
//
// FMODSoundRenderer :: Shutdown
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::Shutdown()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Sys != NULL)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (MusicGroup != NULL)
{
MusicGroup->release();
MusicGroup = NULL;
}
if (PausableSfx != NULL)
{
PausableSfx->release();
PausableSfx = NULL;
}
if (SfxGroup != NULL)
{
SfxGroup->release();
SfxGroup = NULL;
}
if (WaterLP != NULL)
{
WaterLP->release();
WaterLP = NULL;
}
if (WaterReverb != NULL)
{
WaterReverb->release();
WaterReverb = NULL;
}
if (SfxReverbPlaceholder != NULL)
{
SfxReverbPlaceholder->release();
SfxReverbPlaceholder = NULL;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Sys->close();
if (OutputPlugin != 0)
{
Sys->unloadPlugin(OutputPlugin);
OutputPlugin = 0;
}
Sys->release();
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Sys = NULL;
}
}
//==========================================================================
//
// FMODSoundRenderer :: GetOutputRate
//
//==========================================================================
float FMODSoundRenderer::GetOutputRate()
{
return (float)OutputRate;
}
//==========================================================================
//
// FMODSoundRenderer :: PrintStatus
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::PrintStatus()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_OUTPUTTYPE output;
FMOD_SPEAKERMODE speakermode;
FMOD_SOUND_FORMAT format;
FMOD_DSP_RESAMPLER resampler;
int driver;
int samplerate;
int numoutputchannels;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
unsigned int bufferlength;
int numbuffers;
Printf ("Loaded FMOD version: " TEXTCOLOR_GREEN "%x.%02x.%02x\n", ActiveFMODVersion >> 16,
(ActiveFMODVersion >> 8) & 255, ActiveFMODVersion & 255);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (FMOD_OK == Sys->getOutput(&output))
{
Printf ("Output type: " TEXTCOLOR_GREEN "%s\n", Enum_NameForNum(OutputNames, output));
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
}
if (FMOD_OK == Sys->getSpeakerMode(&speakermode))
{
Printf ("Speaker mode: " TEXTCOLOR_GREEN "%s\n", Enum_NameForNum(SpeakerModeNames, speakermode));
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
}
if (FMOD_OK == Sys->getDriver(&driver))
{
char name[256];
if (FMOD_OK != Sys->getDriverInfo(driver, name, sizeof(name), NULL))
{
strcpy(name, "Unknown");
}
Printf ("Driver: " TEXTCOLOR_GREEN "%d" TEXTCOLOR_NORMAL " (" TEXTCOLOR_ORANGE "%s" TEXTCOLOR_NORMAL ")\n", driver, name);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
DumpDriverCaps(Driver_Caps, Driver_MinFrequency, Driver_MaxFrequency);
}
if (FMOD_OK == Sys->getSoftwareFormat(&samplerate, &format, &numoutputchannels, NULL, &resampler, NULL))
{
Printf (TEXTCOLOR_LIGHTBLUE "Software mixer sample rate: " TEXTCOLOR_GREEN "%d\n", samplerate);
Printf (TEXTCOLOR_LIGHTBLUE "Software mixer format: " TEXTCOLOR_GREEN "%s\n", Enum_NameForNum(SoundFormatNames, format));
Printf (TEXTCOLOR_LIGHTBLUE "Software mixer channels: " TEXTCOLOR_GREEN "%d\n", numoutputchannels);
Printf (TEXTCOLOR_LIGHTBLUE "Software mixer resampler: " TEXTCOLOR_GREEN "%s\n", Enum_NameForNum(ResamplerNames, resampler));
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (FMOD_OK == Sys->getDSPBufferSize(&bufferlength, &numbuffers))
{
Printf (TEXTCOLOR_LIGHTBLUE "DSP buffers: " TEXTCOLOR_GREEN "%u samples x %d\n", bufferlength, numbuffers);
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
}
}
//==========================================================================
//
// FMODSoundRenderer :: DumpDriverCaps
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::DumpDriverCaps(FMOD_CAPS caps, int minfrequency, int maxfrequency)
{
Printf (TEXTCOLOR_OLIVE " Min. frequency: " TEXTCOLOR_GREEN "%d\n", minfrequency);
Printf (TEXTCOLOR_OLIVE " Max. frequency: " TEXTCOLOR_GREEN "%d\n", maxfrequency);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Printf (" Features:\n");
if (caps == 0) Printf(TEXTCOLOR_OLIVE " None\n");
if (caps & FMOD_CAPS_HARDWARE) Printf(TEXTCOLOR_OLIVE " Hardware mixing\n");
if (caps & FMOD_CAPS_HARDWARE_EMULATED) Printf(TEXTCOLOR_OLIVE " Hardware acceleration is turned off!\n");
if (caps & FMOD_CAPS_OUTPUT_MULTICHANNEL) Printf(TEXTCOLOR_OLIVE " Multichannel\n");
if (caps & FMOD_CAPS_OUTPUT_FORMAT_PCM8) Printf(TEXTCOLOR_OLIVE " PCM-8");
if (caps & FMOD_CAPS_OUTPUT_FORMAT_PCM16) Printf(TEXTCOLOR_OLIVE " PCM-16");
if (caps & FMOD_CAPS_OUTPUT_FORMAT_PCM24) Printf(TEXTCOLOR_OLIVE " PCM-24");
if (caps & FMOD_CAPS_OUTPUT_FORMAT_PCM32) Printf(TEXTCOLOR_OLIVE " PCM-32");
if (caps & FMOD_CAPS_OUTPUT_FORMAT_PCMFLOAT) Printf(TEXTCOLOR_OLIVE " PCM-Float");
if (caps & (FMOD_CAPS_OUTPUT_FORMAT_PCM8 | FMOD_CAPS_OUTPUT_FORMAT_PCM16 | FMOD_CAPS_OUTPUT_FORMAT_PCM24 | FMOD_CAPS_OUTPUT_FORMAT_PCM32 | FMOD_CAPS_OUTPUT_FORMAT_PCMFLOAT))
{
Printf("\n");
}
if (caps & FMOD_CAPS_REVERB_LIMITED) Printf(TEXTCOLOR_OLIVE " Limited reverb\n");
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
}
//==========================================================================
//
// FMODSoundRenderer :: PrintDriversList
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::PrintDriversList()
{
int numdrivers;
int i;
char name[256];
if (FMOD_OK == Sys->getNumDrivers(&numdrivers))
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
for (i = 0; i < numdrivers; ++i)
{
if (FMOD_OK == Sys->getDriverInfo(i, name, sizeof(name), NULL))
{
Printf("%d. %s\n", i, name);
}
}
}
}
//==========================================================================
//
// FMODSoundRenderer :: GatherStats
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FString FMODSoundRenderer::GatherStats()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
int channels;
float dsp, stream, update, geometry, total;
FString out;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
channels = 0;
total = update = geometry = stream = dsp = 0;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Sys->getChannelsPlaying(&channels);
#if FMOD_VERSION >= 0x42501
// We were built with an FMOD with the geometry parameter.
if (ActiveFMODVersion >= 0x42501)
{ // And we are running with an FMOD that includes it.
FMOD_System_GetCPUUsage((FMOD_SYSTEM *)Sys, &dsp, &stream, &geometry, &update, &total);
}
else
{ // And we are running with an FMOD that does not include it.
// Cast the function to the appropriate type and call through the cast,
// since the headers are for the newer version.
((FMOD_RESULT (F_API *)(FMOD_SYSTEM *, float *, float *, float *, float *))
FMOD_System_GetCPUUsage)((FMOD_SYSTEM *)Sys, &dsp, &stream, &update, &total);
}
#else
// Same as above, except the headers we used do not include the geometry parameter.
if (ActiveFMODVersion >= 0x42501)
{
((FMOD_RESULT (F_API *)(FMOD_SYSTEM *, float *, float *, float *, float *, float *))
FMOD_System_GetCPUUsage)((FMOD_SYSTEM *)Sys, &dsp, &stream, &geometry, &update, &total);
}
else
{
FMOD_System_GetCPUUsage((FMOD_SYSTEM *)Sys, &dsp, &stream, &update, &total);
}
#endif
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
out.Format ("%d channels," TEXTCOLOR_YELLOW "%5.2f" TEXTCOLOR_NORMAL "%% CPU "
"(DSP:" TEXTCOLOR_YELLOW "%5.2f" TEXTCOLOR_NORMAL "%% "
"Stream:" TEXTCOLOR_YELLOW "%5.2f" TEXTCOLOR_NORMAL "%% "
"Geometry:" TEXTCOLOR_YELLOW "%5.2f" TEXTCOLOR_NORMAL "%% "
"Update:" TEXTCOLOR_YELLOW "%5.2f" TEXTCOLOR_NORMAL "%%)",
channels, total, dsp, stream, geometry, update);
return out;
}
//==========================================================================
//
// FMODSoundRenderer :: SetSfxVolume
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::SetSfxVolume(float volume)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
SfxGroup->setVolume(volume);
}
//==========================================================================
//
// FMODSoundRenderer :: SetMusicVolume
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::SetMusicVolume(float volume)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
MusicGroup->setVolume(volume);
}
//==========================================================================
//
// FMODSoundRenderer :: CreateStream
//
// Creates a streaming sound that receives PCM data through a callback.
//
//==========================================================================
SoundStream *FMODSoundRenderer::CreateStream (SoundStreamCallback callback, int buffbytes, int flags, int samplerate, void *userdata)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMODStreamCapsule *capsule;
FMOD::Sound *sound;
FMOD_RESULT result;
FMOD_CREATESOUNDEXINFO exinfo;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_MODE mode;
int sample_shift;
int channel_shift;
InitCreateSoundExInfo(&exinfo);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
capsule = new FMODStreamCapsule (userdata, callback, this);
mode = FMOD_2D | FMOD_OPENUSER | FMOD_LOOP_NORMAL | FMOD_SOFTWARE | FMOD_CREATESTREAM | FMOD_OPENONLY;
sample_shift = (flags & (SoundStream::Bits32 | SoundStream::Float)) ? 2 : (flags & SoundStream::Bits8) ? 0 : 1;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
channel_shift = (flags & SoundStream::Mono) ? 0 : 1;
// Chunk size of stream update in samples. This will be the amount of data
// passed to the user callback.
exinfo.decodebuffersize = buffbytes >> (sample_shift + channel_shift);
// Number of channels in the sound.
exinfo.numchannels = 1 << channel_shift;
2006-04-14 12:58:52 +00:00
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Length of PCM data in bytes of whole song (for Sound::getLength).
// This pretends it's extremely long.
exinfo.length = ~0u;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Default playback rate of sound. */
exinfo.defaultfrequency = samplerate;
// Data format of sound.
if (flags & SoundStream::Float)
{
exinfo.format = FMOD_SOUND_FORMAT_PCMFLOAT;
}
else if (flags & SoundStream::Bits32)
{
exinfo.format = FMOD_SOUND_FORMAT_PCM32;
}
else if (flags & SoundStream::Bits8)
{
exinfo.format = FMOD_SOUND_FORMAT_PCM8;
}
else
{
exinfo.format = FMOD_SOUND_FORMAT_PCM16;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// User callback for reading.
exinfo.pcmreadcallback = FMODStreamCapsule::PCMReadCallback;
// User callback for seeking.
exinfo.pcmsetposcallback = FMODStreamCapsule::PCMSetPosCallback;
// User data to be attached to the sound during creation. Access via Sound::getUserData.
exinfo.userdata = capsule;
result = Sys->createSound(NULL, mode, &exinfo, &sound);
if (result != FMOD_OK)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
delete capsule;
return NULL;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
capsule->SetStream(sound);
return capsule;
}
//==========================================================================
//
// GetTagData
//
// Checks for a string-type tag, and returns its data.
//
//==========================================================================
const char *GetTagData(FMOD::Sound *sound, const char *tag_name)
{
FMOD_TAG tag;
if (FMOD_OK == sound->getTag(tag_name, 0, &tag) &&
(tag.datatype == FMOD_TAGDATATYPE_STRING || tag.datatype == FMOD_TAGDATATYPE_STRING_UTF8))
{
return (const char *)tag.data;
}
return NULL;
}
//==========================================================================
//
// SetCustomLoopPts
//
// Sets up custom sound loops by checking for these tags:
// LOOP_START
// LOOP_END
// LOOP_BIDI
//
//==========================================================================
static void SetCustomLoopPts(FMOD::Sound *sound)
{
#if 0
FMOD_TAG tag;
int numtags;
if (FMOD_OK == stream->getNumTags(&numtags, NULL))
{
for (int i = 0; i < numtags; ++i)
{
if (FMOD_OK == sound->getTag(NULL, i, &tag))
{
Printf("Tag %2d. %d %s = %s\n", i, tag.datatype, tag.name, tag.data);
}
}
}
#endif
const char *tag_data;
unsigned int looppt[2];
bool looppt_as_samples[2], have_looppt[2] = { false };
static const char *const loop_tags[2] = { "LOOP_START", "LOOP_END" };
for (int i = 0; i < 2; ++i)
{
if (NULL != (tag_data = GetTagData(sound, loop_tags[i])))
{
if (S_ParseTimeTag(tag_data, &looppt_as_samples[i], &looppt[i]))
{
have_looppt[i] = true;
}
else
{
Printf("Invalid %s tag: '%s'\n", loop_tags[i], tag_data);
}
}
}
if (have_looppt[0] && !have_looppt[1])
{ // Have a start tag, but not an end tag: End at the end of the song.
have_looppt[1] = (FMOD_OK == sound->getLength(&looppt[1], FMOD_TIMEUNIT_PCM));
looppt_as_samples[1] = true;
}
else if (!have_looppt[0] && have_looppt[1])
{ // Have an end tag, but no start tag: Start at beginning of the song.
looppt[0] = 0;
looppt_as_samples[0] = true;
have_looppt[0] = true;
}
if (have_looppt[0] && have_looppt[1])
{ // Have both loop points: Try to set the loop.
FMOD_RESULT res = sound->setLoopPoints(
looppt[0], looppt_as_samples[0] ? FMOD_TIMEUNIT_PCM : FMOD_TIMEUNIT_MS,
looppt[1] - 1, looppt_as_samples[1] ? FMOD_TIMEUNIT_PCM : FMOD_TIMEUNIT_MS);
if (res != FMOD_OK)
{
Printf("Setting custom loop points failed. Error %d\n", res);
}
}
// Check for a bi-directional loop.
if (NULL != (tag_data = GetTagData(sound, "LOOP_BIDI")) &&
(stricmp(tag_data, "on") == 0 ||
stricmp(tag_data, "true") == 0 ||
stricmp(tag_data, "yes") == 0 ||
stricmp(tag_data, "1") == 0))
{
FMOD_MODE mode;
if (FMOD_OK == (sound->getMode(&mode)))
{
sound->setMode((mode & ~(FMOD_LOOP_OFF | FMOD_LOOP_NORMAL)) | FMOD_LOOP_BIDI);
}
}
}
//==========================================================================
//
// FMODSoundRenderer :: OpenStream
//
// Creates a streaming sound from a file on disk.
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
SoundStream *FMODSoundRenderer::OpenStream(const char *filename_or_data, int flags, int offset, int length)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_MODE mode;
FMOD_CREATESOUNDEXINFO exinfo;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD::Sound *stream;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
FMOD_RESULT result;
bool url;
FString patches;
2006-04-14 12:58:52 +00:00
InitCreateSoundExInfo(&exinfo);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
mode = FMOD_SOFTWARE | FMOD_2D | FMOD_CREATESTREAM;
if (flags & SoundStream::Loop)
2006-04-14 12:58:52 +00:00
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
mode |= FMOD_LOOP_NORMAL;
2006-04-14 12:58:52 +00:00
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (offset == -1)
{
mode |= FMOD_OPENMEMORY;
offset = 0;
}
exinfo.length = length;
exinfo.fileoffset = offset;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if ((*snd_midipatchset)[0] != '\0')
{
#ifdef _WIN32
// If the path does not contain any path separators, automatically
// prepend $PROGDIR to the path.
if (strcspn(snd_midipatchset, ":/\\") == strlen(snd_midipatchset))
{
patches << "$PROGDIR/" << snd_midipatchset;
patches = NicePath(patches);
}
else
#endif
{
patches = NicePath(snd_midipatchset);
}
exinfo.dlsname = patches;
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
}
2006-04-14 12:58:52 +00:00
url = (offset == 0 && length == 0 && strstr(filename_or_data, "://") > filename_or_data);
if (url)
{
// Use a larger buffer for URLs so that it's less likely to be effected
// by hiccups in the data rate from the remote server.
Sys->setStreamBufferSize(64*1024, FMOD_TIMEUNIT_RAWBYTES);
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
result = Sys->createSound(filename_or_data, mode, &exinfo, &stream);
if (url)
{
// Restore standard buffer size.
Sys->setStreamBufferSize(16*1024, FMOD_TIMEUNIT_RAWBYTES);
}
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (result == FMOD_ERR_FORMAT && exinfo.dlsname != NULL)
{
// FMOD_ERR_FORMAT could refer to either the main sound file or
// to the DLS instrument set. Try again without special DLS
// instruments to see if that lets it succeed.
exinfo.dlsname = NULL;
result = Sys->createSound(filename_or_data, mode, &exinfo, &stream);
if (result == FMOD_OK)
{
Printf("%s is an unsupported format.\n", *snd_midipatchset);
}
}
if (result == FMOD_OK)
{
SetCustomLoopPts(stream);
return new FMODStreamCapsule(stream, this, url ? filename_or_data : NULL);
}
return NULL;
}
//==========================================================================
//
// FMODSoundRenderer :: StartSound
//
//==========================================================================
FISoundChannel *FMODSoundRenderer::StartSound(SoundHandle sfx, float vol, int pitch, int flags, FISoundChannel *reuse_chan)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
FMOD_MODE mode;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD::Channel *chan;
float freq;
if (FMOD_OK == ((FMOD::Sound *)sfx.data)->getDefaults(&freq, NULL, NULL, NULL))
{
freq = PITCH(freq, pitch);
}
else
{
freq = 0;
}
GRolloff = NULL; // Do 2D sounds need rolloff?
result = Sys->playSound(FMOD_CHANNEL_FREE, (FMOD::Sound *)sfx.data, true, &chan);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (FMOD_OK == result)
{
result = chan->getMode(&mode);
if (result != FMOD_OK)
{
assert(0);
mode = FMOD_SOFTWARE;
}
mode = (mode & ~FMOD_3D) | FMOD_2D;
if (flags & SNDF_LOOP)
{
mode &= ~FMOD_LOOP_OFF;
if (!(mode & (FMOD_LOOP_NORMAL | FMOD_LOOP_BIDI)))
{
mode |= FMOD_LOOP_NORMAL;
}
}
else
{
mode |= FMOD_LOOP_OFF;
}
chan->setMode(mode);
chan->setChannelGroup((flags & SNDF_NOPAUSE) ? SfxGroup : PausableSfx);
if (freq != 0)
{
chan->setFrequency(freq);
}
chan->setVolume(vol);
if (!HandleChannelDelay(chan, reuse_chan, flags & (SNDF_ABSTIME | SNDF_LOOP), freq))
{
chan->stop();
return NULL;
}
if (flags & SNDF_NOREVERB)
{
FMOD_REVERB_CHANNELPROPERTIES reverb = { 0, };
if (FMOD_OK == chan->getReverbProperties(&reverb))
{
reverb.Room = -10000;
chan->setReverbProperties(&reverb);
}
}
chan->setPaused(false);
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
return CommonChannelSetup(chan, reuse_chan);
}
//DPrintf ("Sound %s failed to play: %d\n", sfx->name.GetChars(), result);
return NULL;
}
//==========================================================================
//
// FMODSoundRenderer :: StartSound3D
//
//==========================================================================
FISoundChannel *FMODSoundRenderer::StartSound3D(SoundHandle sfx, SoundListener *listener, float vol,
FRolloffInfo *rolloff, float distscale,
int pitch, int priority, const FVector3 &pos, const FVector3 &vel,
int channum, int flags, FISoundChannel *reuse_chan)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
FMOD_MODE mode;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD::Channel *chan;
float freq;
float def_freq, def_vol, def_pan;
int numchans;
int def_priority;
if (FMOD_OK == ((FMOD::Sound *)sfx.data)->getDefaults(&def_freq, &def_vol, &def_pan, &def_priority))
{
freq = PITCH(def_freq, pitch);
// Change the sound's default priority before playing it.
((FMOD::Sound *)sfx.data)->setDefaults(def_freq, def_vol, def_pan, clamp(def_priority - priority, 1, 256));
}
else
{
freq = 0;
def_priority = -1;
}
// Play it.
GRolloff = rolloff;
GDistScale = distscale;
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
// Experiments indicate that playSound will ignore priorities and always succeed
// as long as the parameters are set properly. It will first try to kick out sounds
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
// with the same priority level but has no problem with kicking out sounds at
// higher priority levels if it needs to.
result = Sys->playSound(FMOD_CHANNEL_FREE, (FMOD::Sound *)sfx.data, true, &chan);
// Then set the priority back.
if (def_priority >= 0)
{
((FMOD::Sound *)sfx.data)->setDefaults(def_freq, def_vol, def_pan, def_priority);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (FMOD_OK == result)
{
result = chan->getMode(&mode);
if (result != FMOD_OK)
{
mode = FMOD_3D | FMOD_SOFTWARE;
}
if (flags & SNDF_LOOP)
{
mode &= ~FMOD_LOOP_OFF;
if (!(mode & (FMOD_LOOP_NORMAL | FMOD_LOOP_BIDI)))
{
mode |= FMOD_LOOP_NORMAL;
}
}
else
{
// FMOD_LOOP_OFF overrides FMOD_LOOP_NORMAL and FMOD_LOOP_BIDI
mode |= FMOD_LOOP_OFF;
}
mode = SetChanHeadSettings(listener, chan, pos, !!(flags & SNDF_AREA), mode);
chan->setMode(mode);
chan->setChannelGroup((flags & SNDF_NOPAUSE) ? SfxGroup : PausableSfx);
if (mode & FMOD_3D)
{
// Reduce volume of stereo sounds, because each channel will be summed together
// and is likely to be very similar, resulting in an amplitude twice what it
// would have been had it been mixed to mono.
if (FMOD_OK == ((FMOD::Sound *)sfx.data)->getFormat(NULL, NULL, &numchans, NULL))
{
if (numchans > 1)
{
vol *= 0.5f;
}
}
}
if (freq != 0)
{
chan->setFrequency(freq);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
chan->setVolume(vol);
if (mode & FMOD_3D)
{
chan->set3DAttributes((FMOD_VECTOR *)&pos[0], (FMOD_VECTOR *)&vel[0]);
}
if (!HandleChannelDelay(chan, reuse_chan, flags & (SNDF_ABSTIME | SNDF_LOOP), freq))
{
// FMOD seems to get confused if you stop a channel right after
// starting it, so hopefully this function will never fail.
// (Presumably you need an update between them, but I haven't
// tested this hypothesis.)
chan->stop();
return NULL;
}
if (flags & SNDF_NOREVERB)
{
FMOD_REVERB_CHANNELPROPERTIES reverb = { 0, };
if (FMOD_OK == chan->getReverbProperties(&reverb))
{
reverb.Room = -10000;
chan->setReverbProperties(&reverb);
}
}
chan->setPaused(false);
chan->getPriority(&def_priority);
FISoundChannel *schan = CommonChannelSetup(chan, reuse_chan);
schan->Rolloff = *rolloff;
return schan;
}
GRolloff = NULL;
//DPrintf ("Sound %s failed to play: %d\n", sfx->name.GetChars(), result);
return 0;
}
//==========================================================================
//
// FMODSoundRenderer :: MarkStartTime
//
// Marks a channel's start time without actually playing it.
//
//==========================================================================
void FMODSoundRenderer::MarkStartTime(FISoundChannel *chan)
{
Sys->getDSPClock(&chan->StartTime.Hi, &chan->StartTime.Lo);
}
//==========================================================================
//
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
// FMODSoundRenderer :: HandleChannelDelay
//
// If the sound is restarting, seek it to its proper place. Returns false
// if the sound would have ended.
//
// Otherwise, record its starting time, and return true.
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
//
//==========================================================================
bool FMODSoundRenderer::HandleChannelDelay(FMOD::Channel *chan, FISoundChannel *reuse_chan, int flags, float freq) const
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
{
if (reuse_chan != NULL)
{ // Sound is being restarted, so seek it to the position
// it would be in now if it had never been evicted.
QWORD_UNION nowtime;
chan->getDelay(FMOD_DELAYTYPE_DSPCLOCK_START, &nowtime.Hi, &nowtime.Lo);
// If abstime is set, the sound is being restored, and
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
// the channel's start time is actually its seek position.
if (flags & SNDF_ABSTIME)
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
{
unsigned int seekpos = reuse_chan->StartTime.Lo;
if (seekpos > 0)
{
chan->setPosition(seekpos, FMOD_TIMEUNIT_PCM);
}
reuse_chan->StartTime.AsOne = QWORD(nowtime.AsOne - seekpos * OutputRate / freq);
}
else if (reuse_chan->StartTime.AsOne != 0)
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
{
QWORD difftime = nowtime.AsOne - reuse_chan->StartTime.AsOne;
if (difftime > 0)
{
// Clamp the position of looping sounds to be within the sound.
// If we try to start it several minutes past its normal end,
// FMOD doesn't like that.
// FIXME: Clamp this right for loops that don't cover the whole sound.
if (flags & SNDF_LOOP)
{
FMOD::Sound *sound;
if (FMOD_OK == chan->getCurrentSound(&sound))
{
unsigned int len;
if (FMOD_OK == sound->getLength(&len, FMOD_TIMEUNIT_MS) && len != 0)
{
difftime %= len;
}
}
}
return chan->setPosition((unsigned int)(difftime / OutputRate), FMOD_TIMEUNIT_MS) == FMOD_OK;
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
}
}
}
else
{
// chan->setDelay(FMOD_DELAYTYPE_DSPCLOCK_START, DSPClock.Hi, DSPClock.Lo);
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
}
return true;
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
}
//==========================================================================
//
// FMODSoundRenderer :: SetChanHeadSettings
//
// If this sound is played at the same coordinates as the listener, make
// it head relative. Also, area sounds should use no 3D panning if close
// enough to the listener.
//
//==========================================================================
FMOD_MODE FMODSoundRenderer::SetChanHeadSettings(SoundListener *listener, FMOD::Channel *chan,
const FVector3 &pos, bool areasound,
FMOD_MODE oldmode) const
{
if (!listener->valid)
{
return oldmode;
}
FVector3 cpos, mpos;
cpos = listener->position;
if (areasound)
{
float level, old_level;
// How far are we from the perceived sound origin? Within a certain
// short distance, we interpolate between 2D panning and full 3D panning.
const double interp_range = 32.0;
double dist_sqr = (cpos - pos).LengthSquared();
if (dist_sqr == 0)
{
level = 0;
}
else if (dist_sqr <= interp_range * interp_range)
{ // Within interp_range: Interpolate between none and full 3D panning.
level = float(1 - (interp_range - sqrt(dist_sqr)) / interp_range);
}
else
{ // Beyond interp_range: Normal 3D panning.
level = 1;
}
if (chan->get3DPanLevel(&old_level) == FMOD_OK && old_level != level)
{ // Only set it if it's different.
chan->set3DPanLevel(level);
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
if (level < 1)
{ // Let the noise come from all speakers, not just the front ones.
// A centered 3D sound does not play at full volume, so neither should the 2D-panned one.
// This is sqrt(0.5), which is the result for a centered equal power panning.
chan->setSpeakerMix(0.70711f,0.70711f,0.70711f,0.70711f,0.70711f,0.70711f,0.70711f,0.70711f);
- The garbage collector is now run one last time just before exiting the game. - Removed movie volume from the sound menu and renamed some of the other options to give the MIDI device name more room to display itself. - Moved the midi device selection into the main sound menu. - Added FMOD as MIDI device -1, to replace the MIDI mapper. This is still the default device. By default, it uses exactly the same DLS instruments as the Microsoft GS Wavetable Synth. If you have another set DLS level 1 patch set you want to use, set the snd_midipatchfile cvar to specify where it should load the instruments from. - Changed the ProduceMIDI function to store its output into a TArray<BYTE>. An overloaded version wraps around it to continue to supply file-writing support for external Timidity++ usage. - Added an FMOD credits banner to comply with their non-commercial license. - Reimplemented the snd_buffersize cvar for the FMOD Ex sound system. Rather than a time in ms, this is now the length in samples of the DSP buffer. Also added the snd_buffercount cvar to offer complete control over the call to FMOD::System::setDSPBufferSize(). Note that with any snd_samplerate below about 44kHz, you will need to set snd_buffersize to avoid long latencies. - Reimplemented the snd_output cvar for the FMOD Ex sound system. - Changed snd_samplerate default to 0. This now means to use the default sample rate. - Made snd_output, snd_output_format, snd_speakermode, snd_resampler, and snd_hrtf available through the menu. - Split the HRTF effect selection into its own cvar: snd_hrtf. - Removed 96000 Hz option from the menu. It's still available through the cvar, if desired. - Fixed: If Windows sound init failed, retry with DirectSound. (Apparently, WASAPI doesn't work with more than two speakers and PCM-Float output at the same time.) - Fixed: Area sounds only played from the front speakers once you got within the 2D panning area. SVN r854 (trunk)
2008-03-26 04:27:07 +00:00
}
}
return oldmode;
}
else if (cpos == pos)
{ // Head relative
return (oldmode & ~FMOD_3D) | FMOD_2D;
}
// World relative
return (oldmode & ~FMOD_2D) | FMOD_3D;
}
//==========================================================================
//
// FMODSoundRenderer :: CommonChannelSetup
//
// Assign an end callback to the channel and allocates a game channel for
// it.
//
//==========================================================================
FISoundChannel *FMODSoundRenderer::CommonChannelSetup(FMOD::Channel *chan, FISoundChannel *reuse_chan) const
{
FISoundChannel *schan;
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
if (reuse_chan != NULL)
{
schan = reuse_chan;
schan->SysChannel = chan;
}
else
{
schan = S_GetChannel(chan);
chan->getDelay(FMOD_DELAYTYPE_DSPCLOCK_START, &schan->StartTime.Hi, &schan->StartTime.Lo);
}
chan->setUserData(schan);
chan->setCallback(ChannelCallback);
GRolloff = NULL;
return schan;
}
//==========================================================================
//
// FMODSoundRenderer :: StopSound
//
//==========================================================================
void FMODSoundRenderer::StopChannel(FISoundChannel *chan)
{
if (chan != NULL && chan->SysChannel != NULL)
{
((FMOD::Channel *)chan->SysChannel)->stop();
}
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
}
//==========================================================================
//
// FMODSoundRenderer :: ChannelVolume
//
//==========================================================================
void FMODSoundRenderer::ChannelVolume(FISoundChannel *chan, float volume)
{
if (chan != NULL && chan->SysChannel != NULL)
{
((FMOD::Channel *)chan->SysChannel)->setVolume(volume);
}
}
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
//==========================================================================
//
// FMODSoundRenderer :: GetPosition
//
// Returns position of sound on this channel, in samples.
//
//==========================================================================
unsigned int FMODSoundRenderer::GetPosition(FISoundChannel *chan)
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
{
unsigned int pos;
if (chan == NULL || chan->SysChannel == NULL)
{
return 0;
}
((FMOD::Channel *)chan->SysChannel)->getPosition(&pos, FMOD_TIMEUNIT_PCM);
return pos;
}
//==========================================================================
//
// FMODSoundRenderer :: GetAudibility
//
// Returns the audible volume of the channel, after rollof and any other
// factors are applied.
//
//==========================================================================
float FMODSoundRenderer::GetAudibility(FISoundChannel *chan)
{
float aud;
if (chan == NULL || chan->SysChannel == NULL)
{
return 0;
}
((FMOD::Channel *)chan->SysChannel)->getAudibility(&aud);
return aud;
}
//==========================================================================
//
// FMODSoundRenderer :: SetSfxPaused
//
//==========================================================================
void FMODSoundRenderer::SetSfxPaused(bool paused, int slot)
{
int oldslots = SFXPaused;
if (paused)
{
SFXPaused |= 1 << slot;
}
else
{
SFXPaused &= ~(1 << slot);
}
//Printf("%d\n", SFXPaused);
if (oldslots != 0 && SFXPaused == 0)
{
PausableSfx->setPaused(false);
}
else if (oldslots == 0 && SFXPaused != 0)
{
PausableSfx->setPaused(true);
}
}
//==========================================================================
//
// FMODSoundRenderer :: SetInactive
//
// This is similar to SetSfxPaused but will *pause* everything, including
// the global reverb effect. This is meant to be used only when the
// game is deactivated, not for general sound pausing.
//
//==========================================================================
void FMODSoundRenderer::SetInactive(SoundRenderer::EInactiveState inactive)
{
float mix;
bool active;
if (inactive == INACTIVE_Active)
{
mix = 1;
active = true;
}
else if (inactive == INACTIVE_Complete)
{
mix = 1;
active = false;
}
else // inactive == INACTIVE_Mute
{
mix = 0;
active = true;
}
if (ChannelGroupTargetUnitOutput != NULL)
{
ChannelGroupTargetUnitOutput->setMix(mix);
}
if (ChannelGroupTargetUnit != NULL)
{
ChannelGroupTargetUnit->setActive(active);
}
}
//==========================================================================
//
// FMODSoundRenderer :: UpdateSoundParams3D
//
//==========================================================================
void FMODSoundRenderer::UpdateSoundParams3D(SoundListener *listener, FISoundChannel *chan, bool areasound, const FVector3 &pos, const FVector3 &vel)
{
if (chan == NULL || chan->SysChannel == NULL)
return;
FMOD::Channel *fchan = (FMOD::Channel *)chan->SysChannel;
FMOD_MODE oldmode, mode;
if (fchan->getMode(&oldmode) != FMOD_OK)
{
oldmode = FMOD_3D | FMOD_SOFTWARE;
}
mode = SetChanHeadSettings(listener, fchan, pos, areasound, oldmode);
if (mode != oldmode)
{ // Only set the mode if it changed.
fchan->setMode(mode);
}
fchan->set3DAttributes((FMOD_VECTOR *)&pos[0], (FMOD_VECTOR *)&vel[0]);
}
//==========================================================================
//
// FMODSoundRenderer :: UpdateListener
//
//==========================================================================
void FMODSoundRenderer::UpdateListener(SoundListener *listener)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_VECTOR pos, vel;
FMOD_VECTOR forward;
FMOD_VECTOR up;
if (!listener->valid)
{
return;
}
// Set velocity to 0 to prevent crazy doppler shifts just from running.
vel.x = listener->velocity.X;
vel.y = listener->velocity.Y;
vel.z = listener->velocity.Z;
pos.x = listener->position.X;
pos.y = listener->position.Y;
pos.z = listener->position.Z;
float angle = listener->angle;
forward.x = cos(angle);
forward.y = 0;
forward.z = sin(angle);
up.x = 0;
up.y = 1;
up.z = 0;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Sys->set3DListenerAttributes(0, &pos, &vel, &forward, &up);
bool underwater = false;
const ReverbContainer *env;
underwater = (listener->underwater && snd_waterlp);
if (ForcedEnvironment)
{
env = ForcedEnvironment;
}
else
{
env = listener->Environment;
if (env == NULL)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{
env = DefaultEnvironments[0];
}
}
if (env != PrevEnvironment || env->Modified)
{
DPrintf ("Reverb Environment %s\n", env->Name);
const_cast<ReverbContainer*>(env)->Modified = false;
SetSystemReverbProperties(&env->Properties);
PrevEnvironment = env;
if (!SfxReverbHooked)
{
SfxReverbHooked = ReconnectSFXReverbUnit();
}
}
if (underwater || env->SoftwareWater)
{
//PausableSfx->setPitch(0.64171f); // This appears to be what Duke 3D uses
PausableSfx->setPitch(0.7937005f); // Approx. 4 semitones lower; what Nash suggested
if (WaterLP != NULL)
{
if (LastWaterLP != snd_waterlp)
{
LastWaterLP = snd_waterlp;
WaterLP->setParameter(FMOD_DSP_LOWPASS_CUTOFF, snd_waterlp);
}
WaterLP->setActive(true);
if (WaterReverb != NULL && snd_waterreverb)
{
WaterReverb->setActive(true);
WaterReverb->setBypass(false);
SfxConnection->setMix(0);
}
else
{
// Let some of the original mix through so that high frequencies are
// not completely lost. The reverb unit has its own connection and
// preserves dry sounds itself if used.
SfxConnection->setMix(0.1f);
if (WaterReverb != NULL)
{
WaterReverb->setActive(true);
WaterReverb->setBypass(true);
}
}
}
}
else
{
PausableSfx->setPitch(1);
if (WaterLP != NULL)
{
SfxConnection->setMix(1);
WaterLP->setActive(false);
if (WaterReverb != NULL)
{
WaterReverb->setActive(false);
}
}
}
}
//==========================================================================
//
// FMODSoundRenderer :: ReconnectSFXReverbUnit
//
// Locates the DSP unit responsible for software 3D reverb. There is only
// one, and it by default is connected directly to the ChannelGroup Target
// Unit. Older versions of FMOD created this at startup; newer versions
// delay creating it until the first call to setReverbProperties, at which
// point it persists until the system is closed.
//
// Upon locating the proper DSP unit, reconnects it to serve as an input to
// our water DSP chain after the Pausable SFX ChannelGroup.
//
//==========================================================================
bool FMODSoundRenderer::ReconnectSFXReverbUnit()
{
FMOD::DSP *unit;
FMOD_DSP_TYPE type;
int numinputs, i;
if (ChannelGroupTargetUnit == NULL || SfxReverbPlaceholder == NULL)
{
return false;
}
// Look for SFX Reverb unit
if (FMOD_OK != ChannelGroupTargetUnit->getNumInputs(&numinputs))
{
return false;
}
for (i = numinputs - 1; i >= 0; --i)
{
if (FMOD_OK == ChannelGroupTargetUnit->getInput(i, &unit, NULL) &&
FMOD_OK == unit->getType(&type))
{
if (type == FMOD_DSP_TYPE_SFXREVERB)
{
break;
}
}
}
if (i < 0)
{
return false;
}
// Found it! Now move it in the DSP graph to be done before the water
// effect.
if (FMOD_OK != ChannelGroupTargetUnit->disconnectFrom(unit))
{
return false;
}
if (FMOD_OK != SfxReverbPlaceholder->addInput(unit, NULL))
{
return false;
}
return true;
}
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
//==========================================================================
//
// FMODSoundRenderer :: Sync
//
// Used by the save/load code to restart sounds at the same position they
// were in at the time of saving. Must not be nested.
//
//==========================================================================
void FMODSoundRenderer::Sync(bool sync)
{
DSPLocked = sync;
if (sync)
{
Sys->lockDSP();
Sys->getDSPClock(&DSPClock.Hi, &DSPClock.Lo);
}
else
{
Sys->unlockDSP();
}
}
//==========================================================================
//
// FMODSoundRenderer :: UpdateSounds
//
//==========================================================================
void FMODSoundRenderer::UpdateSounds()
{
// Any sounds played between now and the next call to this function
// will start exactly one tic from now.
- The sound code now handles restarting looping sounds itself. As far as the rest of the game is concerned, these sounds will never stop once they have been started until they are explicitly stopped. If they are evicted from their channels, the sound code will restart them as soon as possible. This means that instead of this: if (!S_IsActorPlayingSomething(actor, CHAN_WEAPON, -1)) { S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); } The following is now just as effective: S_Sound(actor, CHAN_WEAPON|CHAN_LOOP, soundid, 1, ATTN_NORM); There are also a couple of other ramifications presented by this change: * The full state of the sound system (sans music) is now stored in save games. Any sounds that were playing when you saved will still be playing when you load. (Try saving while Korax is making a speech in Hexen to hear it.) * Using snd_reset will also preserve any playing sounds. * Movie playback is disabled, probably forever. I did not want to update the MovieDisable/ResumeSound stuff for the new eviction tracking code. A properly updated movie player will use the VMR, which doesn't need these functions, since it would pipe the sound straight through the sound system like everything else, so I decided to dump them now, which leaves the movie player in a totally unworkable state. June 26, 2008 - Changed S_Sound() to take the same floating point attenuation that the internal S_StartSound() uses. Now ambient sounds can use the public S_Sound() interface. - Fixed: S_RelinkSound() compared the points of the channels against the from actor's point, rather than checking the channels' mover. - Changed Strife's animated doors so that their sounds originate from the interior of the sector making them and not from the entire vertical height of the map. SVN r1055 (trunk)
2008-06-29 04:19:38 +00:00
Sys->getDSPClock(&DSPClock.Hi, &DSPClock.Lo);
DSPClock.AsOne += OutputRate / TICRATE;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Sys->update();
}
//==========================================================================
//
// FMODSoundRenderer :: LoadSoundRaw
//
//==========================================================================
SoundHandle FMODSoundRenderer::LoadSoundRaw(BYTE *sfxdata, int length, int frequency, int channels, int bits, int loopstart, int loopend)
{
FMOD_CREATESOUNDEXINFO exinfo;
SoundHandle retval = { NULL };
int numsamples;
if (length <= 0)
{
return retval;
}
InitCreateSoundExInfo(&exinfo);
exinfo.length = length;
exinfo.numchannels = channels;
exinfo.defaultfrequency = frequency;
switch (bits)
{
case 8:
// Need to convert sample data from unsigned to signed.
for (int i = 0; i < length; ++i)
{
sfxdata[i] = sfxdata[i] - 128;
}
case -8:
exinfo.format = FMOD_SOUND_FORMAT_PCM8;
numsamples = length;
break;
case 16:
exinfo.format = FMOD_SOUND_FORMAT_PCM16;
numsamples = length >> 1;
break;
case 32:
exinfo.format = FMOD_SOUND_FORMAT_PCM32;
numsamples = length >> 2;
break;
default:
return retval;
}
const FMOD_MODE samplemode = FMOD_3D | FMOD_OPENMEMORY | FMOD_SOFTWARE | FMOD_OPENRAW;
FMOD::Sound *sample;
FMOD_RESULT result;
result = Sys->createSound((char *)sfxdata, samplemode, &exinfo, &sample);
if (result != FMOD_OK)
{
DPrintf("Failed to allocate sample: Error %d\n", result);
return retval;
}
if (loopstart >= 0)
{
if (loopend == -1)
loopend = numsamples - 1;
sample->setLoopPoints(loopstart, FMOD_TIMEUNIT_PCM, loopend, FMOD_TIMEUNIT_PCM);
}
retval.data = sample;
return retval;
}
//==========================================================================
//
// FMODSoundRenderer :: LoadSound
//
//==========================================================================
SoundHandle FMODSoundRenderer::LoadSound(BYTE *sfxdata, int length)
{
FMOD_CREATESOUNDEXINFO exinfo;
SoundHandle retval = { NULL };
if (length == 0) return retval;
InitCreateSoundExInfo(&exinfo);
exinfo.length = length;
const FMOD_MODE samplemode = FMOD_3D | FMOD_OPENMEMORY | FMOD_SOFTWARE;
FMOD::Sound *sample;
FMOD_RESULT result;
result = Sys->createSound((char *)sfxdata, samplemode, &exinfo, &sample);
if (result != FMOD_OK)
{
DPrintf("Failed to allocate sample: Error %d\n", result);
return retval;
}
SetCustomLoopPts(sample);
retval.data = sample;
return retval;
}
//==========================================================================
//
// FMODSoundRenderer :: UnloadSound
//
//==========================================================================
void FMODSoundRenderer::UnloadSound(SoundHandle sfx)
{
if (sfx.data != NULL)
{
((FMOD::Sound *)sfx.data)->release();
}
}
//==========================================================================
//
// FMODSoundRenderer :: GetMSLength
//
//==========================================================================
unsigned int FMODSoundRenderer::GetMSLength(SoundHandle sfx)
{
if (sfx.data != NULL)
{
unsigned int length;
if (((FMOD::Sound *)sfx.data)->getLength(&length, FMOD_TIMEUNIT_MS) == FMOD_OK)
{
return length;
}
}
return 0; // Don't know.
}
//==========================================================================
//
// FMODSoundRenderer :: GetMSLength
//
//==========================================================================
unsigned int FMODSoundRenderer::GetSampleLength(SoundHandle sfx)
{
if (sfx.data != NULL)
{
unsigned int length;
if (((FMOD::Sound *)sfx.data)->getLength(&length, FMOD_TIMEUNIT_PCM) == FMOD_OK)
{
return length;
}
}
return 0; // Don't know.
}
//==========================================================================
//
// FMODSoundRenderer :: ChannelCallback static
//
// Handles when a channel finishes playing. This is only called when
// System::update is called and is therefore asynchronous with the actual
// end of the channel.
//
//==========================================================================
FMOD_RESULT F_CALLBACK FMODSoundRenderer::ChannelCallback
(FMOD_CHANNEL *channel, FMOD_CHANNEL_CALLBACKTYPE type, void *data1, void *data2)
{
FMOD::Channel *chan = (FMOD::Channel *)channel;
FISoundChannel *schan;
if (chan->getUserData((void **)&schan) == FMOD_OK && schan != NULL)
{
if (type == FMOD_CHANNEL_CALLBACKTYPE_END)
{
S_ChannelEnded(schan);
}
else if (type == FMOD_CHANNEL_CALLBACKTYPE_VIRTUALVOICE)
{
S_ChannelVirtualChanged(schan, data1 != 0);
}
}
return FMOD_OK;
}
//==========================================================================
//
// FMODSoundRenderer :: RolloffCallback static
//
// Calculates a volume for the sound based on distance.
//
//==========================================================================
float F_CALLBACK FMODSoundRenderer::RolloffCallback(FMOD_CHANNEL *channel, float distance)
{
FMOD::Channel *chan = (FMOD::Channel *)channel;
FISoundChannel *schan;
if (GRolloff != NULL)
{
return S_GetRolloff(GRolloff, distance * GDistScale, true);
}
else if (chan->getUserData((void **)&schan) == FMOD_OK && schan != NULL)
{
return S_GetRolloff(&schan->Rolloff, distance * schan->DistanceScale, true);
}
else
{
return 0;
}
}
//==========================================================================
//
// FMODSoundRenderer :: DrawWaveDebug
//
// Bit 0: ( 1) Show oscilloscope for sfx.
// Bit 1: ( 2) Show spectrum for sfx.
// Bit 2: ( 4) Show oscilloscope for music.
// Bit 3: ( 8) Show spectrum for music.
// Bit 4: (16) Show oscilloscope for all sounds.
// Bit 5: (32) Show spectrum for all sounds.
//
//==========================================================================
void FMODSoundRenderer::DrawWaveDebug(int mode)
{
const int window_height = 100;
int window_size;
int numoutchans;
int y, yy;
const spk *labels;
int labelcount;
if (FMOD_OK != Sys->getSoftwareFormat(NULL, NULL, &numoutchans, NULL, NULL, NULL))
{
return;
}
// Decide on which set of labels to use.
labels = (numoutchans == 4) ? SpeakerNames4 : SpeakerNamesMore;
labelcount = MIN<int>(numoutchans, countof(SpeakerNamesMore));
// Scale all the channel windows so one group fits completely on one row, with
// 16 pixels of padding between each window.
window_size = (screen->GetWidth() - 16) / numoutchans - 16;
float *wavearray = (float*)alloca(MAX(SPECTRUM_SIZE,window_size)*sizeof(float));
y = 16;
yy = DrawChannelGroupOutput(SfxGroup, wavearray, window_size, window_height, y, mode);
if (y != yy)
{
DrawSpeakerLabels(labels, yy-14, window_size, labelcount);
}
y = DrawChannelGroupOutput(MusicGroup, wavearray, window_size, window_height, yy, mode >> 2);
if (y != yy)
{
DrawSpeakerLabels(labels, y-14, window_size, labelcount);
}
yy = DrawSystemOutput(wavearray, window_size, window_height, y, mode >> 4);
if (y != yy)
{
DrawSpeakerLabels(labels, yy-14, window_size, labelcount);
}
}
//==========================================================================
//
// FMODSoundRenderer :: DrawSpeakerLabels
//
//==========================================================================
void FMODSoundRenderer::DrawSpeakerLabels(const spk *labels, int y, int width, int count)
{
if (labels == NULL)
{
return;
}
for (int i = 0, x = 16; i < count; ++i)
{
screen->DrawText(SmallFont, CR_LIGHTBLUE, x, y, labels[i], TAG_DONE);
x += width + 16;
}
}
//==========================================================================
//
// FMODSoundRenderer :: DrawChannelGroupOutput
//
// Draws an oscilloscope and/or a spectrum for a channel group.
//
//==========================================================================
int FMODSoundRenderer::DrawChannelGroupOutput(FMOD::ChannelGroup *group, float *wavearray, int width, int height, int y, int mode)
{
int y1, y2;
switch (mode & 0x03)
{
case 0x01: // Oscilloscope only
return DrawChannelGroupWaveData(group, wavearray, width, height, y, false);
case 0x02: // Spectrum only
return DrawChannelGroupSpectrum(group, wavearray, width, height, y, false);
case 0x03: // Oscilloscope + Spectrum
width = (width + 16) / 2 - 16;
y1 = DrawChannelGroupSpectrum(group, wavearray, width, height, y, true);
y2 = DrawChannelGroupWaveData(group, wavearray, width, height, y, true);
return MAX(y1, y2);
}
return y;
}
//==========================================================================
//
// FMODSoundRenderer :: DrawSystemOutput
//
// Like DrawChannelGroupOutput(), but uses the system object.
//
//==========================================================================
int FMODSoundRenderer::DrawSystemOutput(float *wavearray, int width, int height, int y, int mode)
{
int y1, y2;
switch (mode & 0x03)
{
case 0x01: // Oscilloscope only
return DrawSystemWaveData(wavearray, width, height, y, false);
case 0x02: // Spectrum only
return DrawSystemSpectrum(wavearray, width, height, y, false);
case 0x03: // Oscilloscope + Spectrum
width = (width + 16) / 2 - 16;
y1 = DrawSystemSpectrum(wavearray, width, height, y, true);
y2 = DrawSystemWaveData(wavearray, width, height, y, true);
return MAX(y1, y2);
}
return y;
}
//==========================================================================
//
// FMODSoundRenderer :: DrawChannelGroupWaveData
//
// Draws all the output channels for a specified channel group.
// Setting skip to true causes it to skip every other window.
//
//==========================================================================
int FMODSoundRenderer::DrawChannelGroupWaveData(FMOD::ChannelGroup *group, float *wavearray, int width, int height, int y, bool skip)
{
int drawn = 0;
int x = 16;
while (FMOD_OK == group->getWaveData(wavearray, width, drawn))
{
drawn++;
DrawWave(wavearray, x, y, width, height);
x += (width + 16) << int(skip);
}
if (drawn)
{
y += height + 16;
}
return y;
}
//==========================================================================
//
// FMODSoundRenderer::DrawSystemWaveData
//
// Like DrawChannelGroupWaveData, but it uses the system object to get the
// complete output.
//
//==========================================================================
int FMODSoundRenderer::DrawSystemWaveData(float *wavearray, int width, int height, int y, bool skip)
{
int drawn = 0;
int x = 16;
while (FMOD_OK == Sys->getWaveData(wavearray, width, drawn))
{
drawn++;
DrawWave(wavearray, x, y, width, height);
x += (width + 16) << int(skip);
}
if (drawn)
{
y += height + 16;
}
return y;
}
//==========================================================================
//
// FMODSoundRenderer :: DrawWave
//
// Draws an oscilloscope at the specified coordinates on the screen. Each
// entry in the wavearray buffer has its own column. IOW, there are <width>
// entries in wavearray.
//
//==========================================================================
void FMODSoundRenderer::DrawWave(float *wavearray, int x, int y, int width, int height)
{
float scale = height / 2.f;
float mid = y + scale;
int i;
// Draw a box around the oscilloscope.
screen->DrawLine(x - 1, y - 1, x + width, y - 1, -1, MAKEARGB(160, 0, 40, 200));
screen->DrawLine(x + width, y - 1, x + width, y + height, -1, MAKEARGB(160, 0, 40, 200));
screen->DrawLine(x + width, y + height, x - 1, y + height, -1, MAKEARGB(160, 0, 40, 200));
screen->DrawLine(x - 1, y + height, x - 1, y - 1, -1, MAKEARGB(160, 0, 40, 200));
// Draw the actual oscilloscope.
if (screen->Accel2D)
{ // Drawing this with lines is super-slow without hardware acceleration, at least with
// the debug build.
float lasty = mid - wavearray[0] * scale;
float newy;
for (i = 1; i < width; ++i)
{
newy = mid - wavearray[i] * scale;
screen->DrawLine(x + i - 1, int(lasty), x + i, int(newy), -1, MAKEARGB(255,255,248,248));
lasty = newy;
}
}
else
{
for (i = 0; i < width; ++i)
{
float y = wavearray[i] * scale + mid;
screen->DrawPixel(x + i, int(y), -1, MAKEARGB(255,255,255,255));
}
}
}
//==========================================================================
//
// FMODSoundRenderer :: DrawChannelGroupSpectrum
//
// Draws all the spectrum for a specified channel group.
// Setting skip to true causes it to skip every other window, starting at
// the second one.
//
//==========================================================================
int FMODSoundRenderer::DrawChannelGroupSpectrum(FMOD::ChannelGroup *group, float *spectrumarray, int width, int height, int y, bool skip)
{
int drawn = 0;
int x = 16;
if (skip)
{
x += width + 16;
}
while (FMOD_OK == group->getSpectrum(spectrumarray, SPECTRUM_SIZE, drawn, FMOD_DSP_FFT_WINDOW_TRIANGLE))
{
drawn++;
DrawSpectrum(spectrumarray, x, y, width, height);
x += (width + 16) << int(skip);
}
if (drawn)
{
y += height + 16;
}
return y;
}
//==========================================================================
//
// FMODSoundRenderer::DrawSystemSpectrum
//
// Like DrawChannelGroupSpectrum, but it uses the system object to get the
// complete output.
//
//==========================================================================
int FMODSoundRenderer::DrawSystemSpectrum(float *spectrumarray, int width, int height, int y, bool skip)
{
int drawn = 0;
int x = 16;
if (skip)
{
x += width + 16;
}
while (FMOD_OK == Sys->getSpectrum(spectrumarray, SPECTRUM_SIZE, drawn, FMOD_DSP_FFT_WINDOW_TRIANGLE))
{
drawn++;
DrawSpectrum(spectrumarray, x, y, width, height);
x += (width + 16) << int(skip);
}
if (drawn)
{
y += height + 16;
}
return y;
}
//==========================================================================
//
// FMODSoundRenderer :: DrawSpectrum
//
// Draws a spectrum at the specified coordinates on the screen.
//
//==========================================================================
void FMODSoundRenderer::DrawSpectrum(float *spectrumarray, int x, int y, int width, int height)
{
float scale = height / 2.f;
float mid = y + scale;
float db;
int top;
// Draw a border and dark background for the spectrum.
screen->DrawLine(x - 1, y - 1, x + width, y - 1, -1, MAKEARGB(160, 0, 40, 200));
screen->DrawLine(x + width, y - 1, x + width, y + height, -1, MAKEARGB(160, 0, 40, 200));
screen->DrawLine(x + width, y + height, x - 1, y + height, -1, MAKEARGB(160, 0, 40, 200));
screen->DrawLine(x - 1, y + height, x - 1, y - 1, -1, MAKEARGB(160, 0, 40, 200));
screen->Dim(MAKERGB(0,0,0), 0.3f, x, y, width, height);
// Draw the actual spectrum.
for (int i = 0; i < width; ++i)
{
db = spectrumarray[i * (SPECTRUM_SIZE - 2) / width + 1];
db = MAX(-150.f, 10 * log10f(db) * 2); // Convert to decibels and clamp
db = 1.f - (db / -150.f);
db *= height;
top = (int)db;
if (top >= height)
{
top = height - 1;
}
// screen->Clear(x + i, int(y + height - db), x + i + 1, y + height, -1, MAKEARGB(255, 255, 255, 40));
screen->Dim(MAKERGB(255,255,40), 0.65f, x + i, y + height - top, 1, top);
}
}
//==========================================================================
//
// FMODSoundRenderer :: DecodeSample
//
// Uses FMOD to decode a compressed sample to a 16-bit buffer. This is used
// by the DUMB XM reader to handle FMOD's OggMods.
//
//==========================================================================
short *FMODSoundRenderer::DecodeSample(int outlen, const void *coded, int sizebytes, ECodecType type)
{
FMOD_CREATESOUNDEXINFO exinfo;
FMOD::Sound *sound;
FMOD_SOUND_FORMAT format;
int channels;
unsigned int len, amt_read;
FMOD_RESULT result;
short *outbuf;
InitCreateSoundExInfo(&exinfo);
if (type == CODEC_Vorbis)
{
exinfo.suggestedsoundtype = FMOD_SOUND_TYPE_OGGVORBIS;
}
exinfo.length = sizebytes;
result = Sys->createSound((const char *)coded,
FMOD_2D | FMOD_SOFTWARE | FMOD_CREATESTREAM |
FMOD_OPENMEMORY_POINT | FMOD_OPENONLY | FMOD_LOWMEM,
&exinfo, &sound);
if (result != FMOD_OK)
{
return NULL;
}
result = sound->getFormat(NULL, &format, &channels, NULL);
// TODO: Handle more formats if it proves necessary.
if (result != FMOD_OK || format != FMOD_SOUND_FORMAT_PCM16 || channels != 1)
{
sound->release();
return NULL;
}
len = outlen;
// Must be malloc'ed for DUMB, which is C.
outbuf = (short *)malloc(len);
result = sound->readData(outbuf, len, &amt_read);
sound->release();
if (result == FMOD_ERR_FILE_EOF)
{
memset((BYTE *)outbuf + amt_read, 0, len - amt_read);
}
else if (result != FMOD_OK || amt_read != len)
{
free(outbuf);
return NULL;
}
return outbuf;
}
//==========================================================================
//
// FMODSoundRenderer :: InitCreateSoundExInfo
//
// Allow for compiling with 4.26 APIs while still running with older DLLs.
//
//==========================================================================
void FMODSoundRenderer::InitCreateSoundExInfo(FMOD_CREATESOUNDEXINFO *exinfo) const
{
memset(exinfo, 0, sizeof(*exinfo));
#if FMOD_VERSION >= 0x42600 && FMOD_VERSION < 0x43800
if (ActiveFMODVersion < 0x42600)
{
// This parameter was added for 4.26.00, and trying to pass it to older
// DLLs will fail.
exinfo->cbsize = myoffsetof(FMOD_CREATESOUNDEXINFO, ignoresetfilesystem);
}
else
#endif
{
exinfo->cbsize = sizeof(*exinfo);
}
}
//==========================================================================
//
// FMODSoundRenderer :: SetSystemReverbProperties
//
// Set the global reverb properties.
//
//==========================================================================
FMOD_RESULT FMODSoundRenderer::SetSystemReverbProperties(const REVERB_PROPERTIES *props)
{
#if FMOD_VERSION < 0x43800
return Sys->setReverbProperties((const FMOD_REVERB_PROPERTIES *)props);
#else
// The reverb format changed when hardware mixing support was dropped, because
// all EAX-only properties were removed from the structure.
FMOD_REVERB_PROPERTIES fr;
fr.Instance = props->Instance;
fr.Environment = props->Environment;
fr.EnvDiffusion = props->EnvDiffusion;
fr.Room = props->Room;
fr.RoomHF = props->RoomHF;
fr.RoomLF = props->RoomLF;
fr.DecayTime = props->DecayTime;
fr.DecayHFRatio = props->DecayHFRatio;
fr.DecayLFRatio = props->DecayLFRatio;
fr.Reflections = props->Reflections;
fr.ReflectionsDelay = props->ReflectionsDelay;
fr.Reverb = props->Reverb;
fr.ReverbDelay = props->ReverbDelay;
fr.ModulationTime = props->ModulationTime;
fr.ModulationDepth = props->ModulationDepth;
fr.HFReference = props->HFReference;
fr.LFReference = props->LFReference;
fr.Diffusion = props->Diffusion;
fr.Density = props->Density;
fr.Flags = props->Flags;
return Sys->setReverbProperties(&fr);
#endif
}