gzdoom/src/sound/fmodsound.cpp

1566 lines
43 KiB
C++
Raw Normal View History

/*
** i_sound.cpp
** System interface for sound; uses fmod.dll
**
**---------------------------------------------------------------------------
** Copyright 1998-2008 Randy Heit
** All rights reserved.
**
** Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions
** are met:
**
** 1. Redistributions of source code must retain the above copyright
** notice, this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright
** notice, this list of conditions and the following disclaimer in the
** documentation and/or other materials provided with the distribution.
** 3. The name of the author may not be used to endorse or promote products
** derived from this software without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**---------------------------------------------------------------------------
**
*/
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// HEADER FILES ------------------------------------------------------------
#ifdef _WIN32
#define WIN32_LEAN_AND_MEAN
#include <windows.h>
#include <mmsystem.h>
#include "resource.h"
extern HWND Window;
#define USE_WINDOWS_DWORD
#else
#define FALSE 0
#define TRUE 1
#endif
#include "templates.h"
#include "fmodsound.h"
#include "c_cvars.h"
#include "i_system.h"
#include "gi.h"
#include "actor.h"
#include "r_state.h"
#include "w_wad.h"
#include "i_music.h"
#include "i_musicinterns.h"
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
#include "v_text.h"
// MACROS ------------------------------------------------------------------
// killough 2/21/98: optionally use varying pitched sounds
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
#define PITCH(freq,pitch) (snd_pitched ? ((freq)*(pitch))/128.f : float(freq))
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Just some extra for music and whatever
#define NUM_EXTRA_SOFTWARE_CHANNELS 1
#define FIXED2FLOAT(x) ((x)/65536.f)
#define MAX_CHANNELS 256
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
#define ERRCHECK(x)
// TYPES -------------------------------------------------------------------
struct FEnumList
{
const char *Name;
int Value;
};
// EXTERNAL FUNCTION PROTOTYPES --------------------------------------------
FMOD_RESULT SPC_CreateCodec(FMOD::System *sys);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// PUBLIC FUNCTION PROTOTYPES ----------------------------------------------
// PRIVATE FUNCTION PROTOTYPES ---------------------------------------------
static int Enum_NumForName(const FEnumList *list, const char *name);
static const char *Enum_NameForNum(const FEnumList *list, int num);
// EXTERNAL DATA DECLARATIONS ----------------------------------------------
EXTERN_CVAR (String, snd_output)
EXTERN_CVAR (Float, snd_musicvolume)
EXTERN_CVAR (Int, snd_buffersize)
EXTERN_CVAR (Int, snd_samplerate)
EXTERN_CVAR (Bool, snd_pitched)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
EXTERN_CVAR (Int, snd_channels)
// PUBLIC DATA DEFINITIONS -------------------------------------------------
ReverbContainer *ForcedEnvironment;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
CVAR (Int, snd_driver, 0, CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
CVAR (Bool, snd_waterreverb, true, CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
CVAR (String, snd_resampler, "Linear", CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
CVAR (String, snd_speakermode, "Auto", CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
CVAR (String, snd_output_format, "PCM-16", CVAR_ARCHIVE|CVAR_GLOBALCONFIG)
CVAR (Bool, snd_dspnet, false, 0)
// PRIVATE DATA DEFINITIONS ------------------------------------------------
static const ReverbContainer *PrevEnvironment;
// The rolloff callback is called during FMOD::Sound::play, so we need this
// global variable to contain the sound info during that time for the
// callback.
static sfxinfo_t *GSfxInfo;
static float GDistScale;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// In the below lists, duplicate entries are for user selection. When
// queried, only the first one for the particular value is shown.
static const FEnumList OutputNames[] =
{
{ "Auto", FMOD_OUTPUTTYPE_AUTODETECT },
{ "Default", FMOD_OUTPUTTYPE_AUTODETECT },
{ "No sound", FMOD_OUTPUTTYPE_NOSOUND },
// Windows
{ "DirectSound", FMOD_OUTPUTTYPE_DSOUND },
{ "DSound", FMOD_OUTPUTTYPE_DSOUND },
{ "Windows Multimedia", FMOD_OUTPUTTYPE_WINMM },
{ "WinMM", FMOD_OUTPUTTYPE_WINMM },
{ "WaveOut", FMOD_OUTPUTTYPE_WINMM },
{ "OpenAL", FMOD_OUTPUTTYPE_OPENAL },
{ "WASAPI", FMOD_OUTPUTTYPE_WASAPI },
{ "ASIO", FMOD_OUTPUTTYPE_ASIO },
// Linux
{ "OSS", FMOD_OUTPUTTYPE_OSS },
{ "ALSA", FMOD_OUTPUTTYPE_ALSA },
{ "ESD", FMOD_OUTPUTTYPE_ESD },
// Mac
{ "Sound Manager", FMOD_OUTPUTTYPE_SOUNDMANAGER },
{ "Core Audio", FMOD_OUTPUTTYPE_COREAUDIO },
{ NULL, 0 }
};
static const FEnumList SpeakerModeNames[] =
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{ "Mono", FMOD_SPEAKERMODE_MONO },
{ "Stereo", FMOD_SPEAKERMODE_STEREO },
{ "Quad", FMOD_SPEAKERMODE_QUAD },
{ "Surround", FMOD_SPEAKERMODE_SURROUND },
{ "5.1", FMOD_SPEAKERMODE_5POINT1 },
{ "7.1", FMOD_SPEAKERMODE_7POINT1 },
{ "Prologic", FMOD_SPEAKERMODE_PROLOGIC },
{ "1", FMOD_SPEAKERMODE_MONO },
{ "2", FMOD_SPEAKERMODE_STEREO },
{ "4", FMOD_SPEAKERMODE_QUAD },
{ "Headphones", 9001 },
{ "HRTF", 9001 },
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{ NULL, 0 }
};
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
static const FEnumList ResamplerNames[] =
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{ "No Interpolation", FMOD_DSP_RESAMPLER_NOINTERP },
{ "NoInterp", FMOD_DSP_RESAMPLER_NOINTERP },
{ "Linear", FMOD_DSP_RESAMPLER_LINEAR },
{ "Cubic", FMOD_DSP_RESAMPLER_CUBIC },
{ "Spline", FMOD_DSP_RESAMPLER_SPLINE },
{ NULL, 0 }
};
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
static const FEnumList SoundFormatNames[] =
{
{ "None", FMOD_SOUND_FORMAT_NONE },
{ "PCM-8", FMOD_SOUND_FORMAT_PCM8 },
{ "PCM-16", FMOD_SOUND_FORMAT_PCM16 },
{ "PCM-24", FMOD_SOUND_FORMAT_PCM24 },
{ "PCM-32", FMOD_SOUND_FORMAT_PCM32 },
{ "PCM-Float", FMOD_SOUND_FORMAT_PCMFLOAT },
{ "GCADPCM", FMOD_SOUND_FORMAT_GCADPCM },
{ "IMAADPCM", FMOD_SOUND_FORMAT_IMAADPCM },
{ "VAG", FMOD_SOUND_FORMAT_VAG },
{ "XMA", FMOD_SOUND_FORMAT_XMA },
{ "MPEG", FMOD_SOUND_FORMAT_MPEG },
{ NULL, 0 }
};
// CODE --------------------------------------------------------------------
//==========================================================================
//
// Enum_NumForName
//
// Returns the value of an enum name, or -1 if not found.
//
//==========================================================================
static int Enum_NumForName(const FEnumList *list, const char *name)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
while (list->Name != NULL)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (stricmp(list->Name, name) == 0)
{
return list->Value;
}
list++;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return -1;
}
//==========================================================================
//
// Enum_NameForNum
//
// Returns the name of an enum value. If there is more than one name for a
// value, on the first one in the list is returned. Returns NULL if there
// was no match.
//
//==========================================================================
static const char *Enum_NameForNum(const FEnumList *list, int num)
{
while (list->Name != NULL)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (list->Value == num)
{
return list->Name;
}
list++;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return NULL;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
//==========================================================================
//
// The container for a FSOUND_STREAM.
//
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
//==========================================================================
class FMODStreamCapsule : public SoundStream
{
public:
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMODStreamCapsule(FMOD::Sound *stream, FMODSoundRenderer *owner)
: Owner(owner), Stream(NULL), Channel(NULL), DSP(NULL),
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
UserData(NULL), Callback(NULL)
{
SetStream(stream);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMODStreamCapsule(void *udata, SoundStreamCallback callback, FMODSoundRenderer *owner)
: Owner(owner), Stream(NULL), Channel(NULL), DSP(NULL),
UserData(udata), Callback(callback)
{}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
~FMODStreamCapsule()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Stream != NULL)
{
Stream->release();
}
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void SetStream(FMOD::Sound *stream)
{
float frequency;
Stream = stream;
// As this interface is for music, make it super-high priority.
if (FMOD_OK == stream->getDefaults(&frequency, NULL, NULL, NULL))
{
stream->setDefaults(frequency, 1, 0, 0);
}
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
bool Play(bool looping, float volume, bool normalize)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
Stream->setMode(looping ? FMOD_LOOP_NORMAL : FMOD_LOOP_OFF);
result = Owner->Sys->playSound(FMOD_CHANNEL_FREE, Stream, true, &Channel);
if (result != FMOD_OK)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Channel->setChannelGroup(Owner->MusicGroup);
Channel->setSpeakerMix(1, 1, 1, 1, 1, 1, 1, 1);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Channel->setVolume(volume);
// Ensure reverb is disabled.
FMOD_REVERB_CHANNELPROPERTIES reverb;
if (FMOD_OK == Channel->getReverbProperties(&reverb))
{
reverb.Room = -10000;
Channel->setReverbProperties(&reverb);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (normalize)
{ // Attach a normalizer DSP unit to the channel.
result = Owner->Sys->createDSPByType(FMOD_DSP_TYPE_NORMALIZE, &DSP);
if (result == FMOD_OK)
{
Channel->addDSP(DSP);
}
}
Channel->setPaused(false);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return true;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void Stop()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Channel != NULL)
{
Channel->stop();
Channel = NULL;
}
if (DSP != NULL)
{
DSP->release();
DSP = NULL;
}
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
bool SetPaused(bool paused)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Channel != NULL)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return FMOD_OK == Channel->setPaused(paused);
}
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
unsigned int GetPosition()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
unsigned int pos;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Channel != NULL && FMOD_OK == Channel->getPosition(&pos, FMOD_TIMEUNIT_MS))
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return pos;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return 0;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void SetVolume(float volume)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Channel != NULL)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Channel->setVolume(volume);
}
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Sets the current order number for a MOD-type song, or the position in ms
// for anything else.
bool SetPosition(int pos)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_SOUND_TYPE type;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (FMOD_OK == Stream->getFormat(&type, NULL, NULL, NULL) &&
(type == FMOD_SOUND_TYPE_IT ||
type == FMOD_SOUND_TYPE_MOD ||
type == FMOD_SOUND_TYPE_S3M ||
type == FMOD_SOUND_TYPE_XM))
{
return FMOD_OK == Channel->setPosition(pos, FMOD_TIMEUNIT_MODORDER);
}
return FMOD_OK == Channel->setPosition(pos, FMOD_TIMEUNIT_MS);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
static FMOD_RESULT F_CALLBACK PCMReadCallback(FMOD_SOUND *sound, void *data, unsigned int datalen)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
FMODStreamCapsule *self;
result = ((FMOD::Sound *)sound)->getUserData((void **)&self);
if (result != FMOD_OK || self == NULL || self->Callback == NULL)
{
return FMOD_ERR_INVALID_PARAM;
}
if (self->Callback(self, data, datalen, self->UserData))
{
return FMOD_OK;
}
else
{
return FMOD_ERR_FILE_EOF;
}
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
static FMOD_RESULT F_CALLBACK PCMSetPosCallback(FMOD_SOUND *sound, int subsound, unsigned int position, FMOD_TIMEUNIT postype)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// This is useful if the user calls Channel::setPosition and you want
// to seek your data accordingly.
return FMOD_OK;
}
private:
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMODSoundRenderer *Owner;
FMOD::Sound *Stream;
FMOD::Channel *Channel;
FMOD::DSP *DSP;
void *UserData;
SoundStreamCallback Callback;
};
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
//==========================================================================
//
// The interface the game uses to talk to FMOD.
//
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMODSoundRenderer::FMODSoundRenderer()
{
InitSuccess = Init();
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMODSoundRenderer::~FMODSoundRenderer()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Shutdown();
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
bool FMODSoundRenderer::IsValid()
{
return InitSuccess;
}
//==========================================================================
//
// FMODSoundRenderer :: Init
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
bool FMODSoundRenderer::Init()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
unsigned int version;
FMOD_SPEAKERMODE speakermode;
FMOD_SOUND_FORMAT format;
FMOD_DSP_RESAMPLER resampler;
FMOD_INITFLAGS initflags;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
int eval;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
SFXPaused = false;
MusicGroup = NULL;
SfxGroup = NULL;
PausableSfx = NULL;
PrevEnvironment = DefaultEnvironments[0];
Printf ("I_InitSound: Initializing FMOD\n");
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Create a System object and initialize.
result = FMOD::System_Create(&Sys);
ERRCHECK(result);
result = Sys->getVersion(&version);
ERRCHECK(result);
if (version < FMOD_VERSION)
{
Printf (" "TEXTCOLOR_ORANGE"Error! You are using an old version of FMOD (%x.%02x.%02x).\n"
" "TEXTCOLOR_ORANGE"This program requires version %x.%02x.%02x\n",
version >> 16, (version >> 8) & 255, version & 255,
FMOD_VERSION >> 16, (FMOD_VERSION >> 8) & 255, FMOD_VERSION & 255);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return false;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = Sys->getDriverCaps(0, &Driver_Caps, &Driver_MinFrequency, &Driver_MaxFrequency, &speakermode);
ERRCHECK(result);
// Set the user selected speaker mode.
eval = Enum_NumForName(SpeakerModeNames, snd_speakermode);
if (eval >= 0)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
speakermode = FMOD_SPEAKERMODE(eval);
}
result = Sys->setSpeakerMode(speakermode < 9000 ? speakermode : FMOD_SPEAKERMODE_STEREO);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
ERRCHECK(result);
// Set software format
eval = Enum_NumForName(SoundFormatNames, snd_output_format);
format = eval >= 0 ? FMOD_SOUND_FORMAT(eval) : FMOD_SOUND_FORMAT_PCM16;
eval = Enum_NumForName(ResamplerNames, snd_resampler);
resampler = eval >= 0 ? FMOD_DSP_RESAMPLER(eval) : FMOD_DSP_RESAMPLER_LINEAR;
result = Sys->setSoftwareFormat(snd_samplerate, format, 0, 0, resampler);
ERRCHECK(result);
// Set software channels according to snd_channels
result = Sys->setSoftwareChannels(snd_channels + NUM_EXTRA_SOFTWARE_CHANNELS);
ERRCHECK(result);
#ifdef _WIN32
if (OSPlatform == os_WinNT4)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// The following was true as of FMOD 3. I don't know if it still
// applies to FMOD Ex, nor do I have an NT 4 install anymore, but
// there's no reason to get rid of it yet.
//
// If running Windows NT 4, we need to initialize DirectSound before
// using WinMM. If we don't, then FSOUND_Close will corrupt a
// heap. This might just be the Audigy's drivers--I don't know why
// it happens. At least the fix is simple enough. I only need to
// initialize DirectSound once, and then I can initialize/close
// WinMM as many times as I want.
//
// Yes, using WinMM under NT 4 is a good idea. I can get latencies as
// low as 20 ms with WinMM, but with DirectSound I need to have the
// latency as high as 120 ms to avoid crackling--quite the opposite
// from the other Windows versions with real DirectSound support.
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
static bool inited_dsound = false;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (!inited_dsound)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Sys->setOutput(FMOD_OUTPUTTYPE_DSOUND) == FMOD_OK)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Sys->init(1, FMOD_INIT_NORMAL, 0) == FMOD_OK)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
inited_dsound = true;
Sleep(50);
Sys->close();
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Sys->setOutput(FMOD_OUTPUTTYPE_WINMM);
}
}
}
#endif
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Set the user specified output mode.
eval = Enum_NumForName(OutputNames, snd_output);
if (eval >= 0)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = Sys->setOutput(FMOD_OUTPUTTYPE(eval));
ERRCHECK(result);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Driver_Caps & FMOD_CAPS_HARDWARE_EMULATED)
{ // The user has the 'Acceleration' slider set to off!
// This is really bad for latency!
Printf ("Warning: The sound acceleration slider has been set to off.\n");
Printf ("Please turn it back on if you want decent sound.\n");
result = Sys->setDSPBufferSize(1024, 10); // At 48khz, the latency between issuing an fmod command and hearing it will now be about 213ms.
ERRCHECK(result);
}
// Try to init
initflags = FMOD_INIT_NORMAL;
if (speakermode > 9000)
{
initflags |= FMOD_INIT_SOFTWARE_HRTF;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (snd_dspnet)
{
initflags |= FMOD_INIT_ENABLE_DSPNET;
}
result = Sys->init(snd_channels + NUM_EXTRA_SOFTWARE_CHANNELS, initflags, 0);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (result == FMOD_ERR_OUTPUT_CREATEBUFFER)
{ // The speaker mode selected isn't supported by this soundcard. Switch it back to stereo.
result = Sys->setSpeakerMode(FMOD_SPEAKERMODE_STEREO);
ERRCHECK(result);
result = Sys->init(snd_channels + NUM_EXTRA_SOFTWARE_CHANNELS, initflags, 0);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
ERRCHECK(result);
}
if (result != FMOD_OK)
{ // Initializing FMOD failed. Cry cry.
return false;
}
// Create channel groups
result = Sys->createChannelGroup("Music", &MusicGroup);
ERRCHECK(result);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
result = Sys->createChannelGroup("SFX", &SfxGroup);
ERRCHECK(result);
result = Sys->createChannelGroup("Pausable SFX", &PausableSfx);
ERRCHECK(result);
result = SfxGroup->addGroup(PausableSfx);
ERRCHECK(result);
result = SPC_CreateCodec(Sys);
Sys->set3DSettings(0.5f, 96.f, 1.f);
Sys->set3DRolloffCallback(RolloffCallback);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
snd_sfxvolume.Callback ();
return true;
}
//==========================================================================
//
// FMODSoundRenderer :: Shutdown
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::Shutdown()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (Sys != NULL)
{
unsigned int i;
S_StopAllChannels();
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (MusicGroup != NULL)
{
MusicGroup->release();
MusicGroup = NULL;
}
if (PausableSfx != NULL)
{
PausableSfx->release();
PausableSfx = NULL;
}
if (SfxGroup != NULL)
{
SfxGroup->release();
SfxGroup = NULL;
}
// Free all loaded samples
for (i = 0; i < S_sfx.Size(); i++)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (S_sfx[i].data != NULL)
{
((FMOD::Sound *)S_sfx[i].data)->release();
S_sfx[i].data = NULL;
}
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Sys->close();
Sys = NULL;
}
}
//==========================================================================
//
// FMODSoundRenderer :: PrintStatus
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::PrintStatus()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_OUTPUTTYPE output;
FMOD_SPEAKERMODE speakermode;
FMOD_SOUND_FORMAT format;
FMOD_DSP_RESAMPLER resampler;
int driver;
int samplerate;
int numoutputchannels;
int num2d, num3d, total;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (FMOD_OK == Sys->getOutput(&output))
{
Printf ("Output type: "TEXTCOLOR_GREEN"%s\n", Enum_NameForNum(OutputNames, output));
}
if (FMOD_OK == Sys->getSpeakerMode(&speakermode))
{
Printf ("Speaker mode: "TEXTCOLOR_GREEN"%s\n", Enum_NameForNum(SpeakerModeNames, speakermode));
}
if (FMOD_OK == Sys->getDriver(&driver))
{
char name[256];
if (FMOD_OK != Sys->getDriverInfo(driver, name, sizeof(name), NULL))
{
strcpy(name, "Unknown");
}
Printf ("Driver: "TEXTCOLOR_GREEN"%d"TEXTCOLOR_NORMAL" ("TEXTCOLOR_ORANGE"%s"TEXTCOLOR_NORMAL")\n", driver, name);
DumpDriverCaps(Driver_Caps, Driver_MinFrequency, Driver_MaxFrequency);
}
if (FMOD_OK == Sys->getHardwareChannels(&num2d, &num3d, &total))
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Printf (TEXTCOLOR_YELLOW "Hardware 2D channels: "TEXTCOLOR_GREEN"%d\n", num2d);
Printf (TEXTCOLOR_YELLOW "Hardware 3D channels: "TEXTCOLOR_GREEN"%d\n", num3d);
Printf (TEXTCOLOR_YELLOW "Total hardware channels: "TEXTCOLOR_GREEN"%d\n", total);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (FMOD_OK == Sys->getSoftwareFormat(&samplerate, &format, &numoutputchannels, NULL, &resampler, NULL))
{
Printf (TEXTCOLOR_LIGHTBLUE "Software mixer sample rate: "TEXTCOLOR_GREEN"%d\n", samplerate);
Printf (TEXTCOLOR_LIGHTBLUE "Software mixer format: "TEXTCOLOR_GREEN"%s\n", Enum_NameForNum(SoundFormatNames, format));
Printf (TEXTCOLOR_LIGHTBLUE "Software mixer channels: "TEXTCOLOR_GREEN"%d\n", numoutputchannels);
Printf (TEXTCOLOR_LIGHTBLUE "Software mixer resampler: "TEXTCOLOR_GREEN"%s\n", Enum_NameForNum(ResamplerNames, resampler));
}
}
//==========================================================================
//
// FMODSoundRenderer :: DumpDriverCaps
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::DumpDriverCaps(FMOD_CAPS caps, int minfrequency, int maxfrequency)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Printf (TEXTCOLOR_OLIVE " Min. frequency: "TEXTCOLOR_GREEN"%d\n", minfrequency);
Printf (TEXTCOLOR_OLIVE " Max. frequency: "TEXTCOLOR_GREEN"%d\n", maxfrequency);
Printf (" Features:\n");
if (caps == 0) Printf(TEXTCOLOR_OLIVE " None\n");
if (caps & FMOD_CAPS_HARDWARE) Printf(TEXTCOLOR_OLIVE " Hardware mixing\n");
if (caps & FMOD_CAPS_HARDWARE_EMULATED) Printf(TEXTCOLOR_OLIVE " Hardware acceleration is turned off!\n");
if (caps & FMOD_CAPS_OUTPUT_MULTICHANNEL) Printf(TEXTCOLOR_OLIVE " Multichannel\n");
if (caps & FMOD_CAPS_OUTPUT_FORMAT_PCM8) Printf(TEXTCOLOR_OLIVE " PCM-8");
if (caps & FMOD_CAPS_OUTPUT_FORMAT_PCM16) Printf(TEXTCOLOR_OLIVE " PCM-16");
if (caps & FMOD_CAPS_OUTPUT_FORMAT_PCM24) Printf(TEXTCOLOR_OLIVE " PCM-24");
if (caps & FMOD_CAPS_OUTPUT_FORMAT_PCM32) Printf(TEXTCOLOR_OLIVE " PCM-32");
if (caps & FMOD_CAPS_OUTPUT_FORMAT_PCMFLOAT) Printf(TEXTCOLOR_OLIVE " PCM-Float");
if (caps & (FMOD_CAPS_OUTPUT_FORMAT_PCM8 | FMOD_CAPS_OUTPUT_FORMAT_PCM16 | FMOD_CAPS_OUTPUT_FORMAT_PCM24 | FMOD_CAPS_OUTPUT_FORMAT_PCM32 | FMOD_CAPS_OUTPUT_FORMAT_PCMFLOAT))
{
Printf("\n");
}
if (caps & FMOD_CAPS_REVERB_EAX2) Printf(TEXTCOLOR_OLIVE " EAX2");
if (caps & FMOD_CAPS_REVERB_EAX3) Printf(TEXTCOLOR_OLIVE " EAX3");
if (caps & FMOD_CAPS_REVERB_EAX4) Printf(TEXTCOLOR_OLIVE " EAX4");
if (caps & FMOD_CAPS_REVERB_EAX5) Printf(TEXTCOLOR_OLIVE " EAX5");
if (caps & FMOD_CAPS_REVERB_I3DL2) Printf(TEXTCOLOR_OLIVE " I3DL2");
if (caps & (FMOD_CAPS_REVERB_EAX2 | FMOD_CAPS_REVERB_EAX3 | FMOD_CAPS_REVERB_EAX4 | FMOD_CAPS_REVERB_EAX5 | FMOD_CAPS_REVERB_I3DL2))
{
Printf("\n");
}
if (caps & FMOD_CAPS_REVERB_LIMITED) Printf("TEXTCOLOR_OLIVE Limited reverb\n");
}
//==========================================================================
//
// FMODSoundRenderer :: PrintDriversList
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::PrintDriversList()
{
int numdrivers;
int i;
char name[256];
if (FMOD_OK == Sys->getNumDrivers(&numdrivers))
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
for (i = 0; i < numdrivers; ++i)
{
if (FMOD_OK == Sys->getDriverInfo(i, name, sizeof(name), NULL))
{
Printf("%d. %s\n", i, name);
}
}
}
}
//==========================================================================
//
// FMODSoundRenderer :: GatherStats
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FString FMODSoundRenderer::GatherStats()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
int channels;
float dsp, stream, update, total;
FString out;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
channels = 0;
total = update = stream = dsp = 0;
Sys->getChannelsPlaying(&channels);
Sys->getCPUUsage(&dsp, &stream, &update, &total);
out.Format ("%d channels,%5.2f%% CPU (%.2f%% DSP %.2f%% Stream %.2f%% Update)",
channels, total, dsp, stream, update);
return out;
}
//==========================================================================
//
// FMODSoundRenderer :: MovieDisableSound
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::MovieDisableSound()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
I_ShutdownMusic();
Shutdown();
}
//==========================================================================
//
// FMODSoundRenderer :: MovieResumeSound
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::MovieResumeSound()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Init();
S_Init();
S_RestartMusic();
}
//==========================================================================
//
// FMODSoundRenderer :: SetSfxVolume
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::SetSfxVolume(float volume)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
SfxGroup->setVolume(volume);
}
//==========================================================================
//
// FMODSoundRenderer :: SetMusicVolume
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::SetMusicVolume(float volume)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
MusicGroup->setVolume(volume);
}
//==========================================================================
//
// FMODSoundRenderer :: CreateStream
//
// Creates a streaming sound that receives PCM data through a callback.
//
//==========================================================================
SoundStream *FMODSoundRenderer::CreateStream (SoundStreamCallback callback, int buffbytes, int flags, int samplerate, void *userdata)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMODStreamCapsule *capsule;
FMOD::Sound *sound;
FMOD_RESULT result;
FMOD_CREATESOUNDEXINFO exinfo = { sizeof(exinfo), };
FMOD_MODE mode;
int sample_shift;
int channel_shift;
2006-04-14 12:58:52 +00:00
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
capsule = new FMODStreamCapsule (userdata, callback, this);
mode = FMOD_2D | FMOD_OPENUSER | FMOD_LOOP_NORMAL | FMOD_SOFTWARE | FMOD_CREATESTREAM;
sample_shift = (flags & SoundStream::Bits8) ? 0 : 1;
channel_shift = (flags & SoundStream::Mono) ? 0 : 1;
// Chunk size of stream update in samples. This will be the amount of data
// passed to the user callback.
exinfo.decodebuffersize = buffbytes >> (sample_shift + channel_shift);
// Number of channels in the sound.
exinfo.numchannels = 1 << channel_shift;
2006-04-14 12:58:52 +00:00
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Length of PCM data in bytes of whole song (for Sound::getLength).
// This pretends it's 5 seconds long.
exinfo.length = (samplerate * 5) << (sample_shift + channel_shift);
// Default playback rate of sound. */
exinfo.defaultfrequency = samplerate;
// Data format of sound.
exinfo.format = (flags & SoundStream::Bits8) ? FMOD_SOUND_FORMAT_PCM8 : FMOD_SOUND_FORMAT_PCM16;
// User callback for reading.
exinfo.pcmreadcallback = FMODStreamCapsule::PCMReadCallback;
// User callback for seeking.
exinfo.pcmsetposcallback = FMODStreamCapsule::PCMSetPosCallback;
// User data to be attached to the sound during creation. Access via Sound::getUserData.
exinfo.userdata = capsule;
result = Sys->createSound(NULL, mode, &exinfo, &sound);
if (result != FMOD_OK)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
delete capsule;
return NULL;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
capsule->SetStream(sound);
return capsule;
}
//==========================================================================
//
// FMODSoundRenderer :: OpenStream
//
// Creates a streaming sound from a file on disk.
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
SoundStream *FMODSoundRenderer::OpenStream(const char *filename_or_data, int flags, int offset, int length)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_MODE mode;
FMOD_CREATESOUNDEXINFO exinfo = { sizeof(exinfo), };
FMOD::Sound *stream;
2006-04-14 12:58:52 +00:00
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
mode = FMOD_SOFTWARE | FMOD_2D | FMOD_CREATESTREAM;
if (flags & SoundStream::Loop)
2006-04-14 12:58:52 +00:00
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
mode |= FMOD_LOOP_NORMAL;
2006-04-14 12:58:52 +00:00
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (offset == -1)
{
mode |= FMOD_OPENMEMORY;
offset = 0;
}
exinfo.length = length;
exinfo.fileoffset = offset;
2006-04-14 12:58:52 +00:00
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (FMOD_OK == Sys->createSound(filename_or_data, mode, &exinfo, &stream))
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
return new FMODStreamCapsule(stream, this);
}
return NULL;
}
//==========================================================================
//
// FMODSoundRenderer :: StartSound
//
//==========================================================================
FSoundChan *FMODSoundRenderer::StartSound(sfxinfo_t *sfx, float vol, int pitch, bool looping, bool pausable)
{
int id = int(sfx - &S_sfx[0]);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
FMOD_MODE mode;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD::Channel *chan;
float freq;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
freq = PITCH(sfx->frequency, pitch);
GSfxInfo = sfx;
result = Sys->playSound(FMOD_CHANNEL_FREE, (FMOD::Sound *)sfx->data, true, &chan);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (FMOD_OK == result)
{
result = chan->getMode(&mode);
if (result != FMOD_OK)
{
assert(0);
mode = FMOD_SOFTWARE;
}
mode = (mode & ~FMOD_3D) | FMOD_2D;
if (looping)
{
mode = (mode & ~FMOD_LOOP_OFF) | FMOD_LOOP_NORMAL;
}
chan->setMode(mode);
chan->setChannelGroup((pausable && !SFXPaused) ? PausableSfx : SfxGroup);
chan->setFrequency(freq);
chan->setVolume(vol);
chan->setPaused(false);
return CommonChannelSetup(chan, false);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
DPrintf ("Sound %s failed to play: %d\n", sfx->name.GetChars(), result);
return 0;
}
//==========================================================================
//
// FMODSoundRenderer :: StartSound3D
//
//==========================================================================
FSoundChan *FMODSoundRenderer::StartSound3D(sfxinfo_t *sfx, float vol, float distscale,
int pitch, int priority, bool looping, float pos[3], float vel[3], bool pausable)
{
int id = int(sfx - &S_sfx[0]);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
FMOD_MODE mode;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD::Channel *chan;
float freq;
float def_freq, def_vol, def_pan;
int def_priority;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
freq = PITCH(sfx->frequency, pitch);
// Change the sound's default priority before playing it.
if (FMOD_OK == ((FMOD::Sound *)sfx->data)->getDefaults(&def_freq, &def_vol, &def_pan, &def_priority))
{
((FMOD::Sound *)sfx->data)->setDefaults(def_freq, def_vol, def_pan, clamp(def_priority - priority, 1, 256));
}
else
{
def_priority = -1;
}
// Play it.
GSfxInfo = sfx;
GDistScale = distscale;
result = Sys->playSound(FMOD_CHANNEL_FREE, (FMOD::Sound *)sfx->data, true, &chan);
// Then set the priority back.
if (def_priority >= 0)
{
((FMOD::Sound *)sfx->data)->setDefaults(def_freq, def_vol, def_pan, def_priority);
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (FMOD_OK == result)
{
result = chan->getMode(&mode);
if (result != FMOD_OK)
{
mode = FMOD_3D | FMOD_SOFTWARE;
}
if (looping)
{
mode = (mode & ~FMOD_LOOP_OFF) | FMOD_LOOP_NORMAL;
}
// If this sound is played at the same coordinates as the listener,
// make it head relative.
if (players[consoleplayer].camera != NULL)
{
float cpos[3];
cpos[0] = FIXED2FLOAT(players[consoleplayer].camera->x);
cpos[2] = FIXED2FLOAT(players[consoleplayer].camera->y);
cpos[1] = FIXED2FLOAT(players[consoleplayer].camera->z);
if (cpos[0] == pos[0] && cpos[1] == pos[1] && cpos[2] == pos[2])
{
mode = (mode & ~FMOD_3D_WORLDRELATIVE) | FMOD_3D_HEADRELATIVE;
pos[0] = 0;
pos[1] = 0;
pos[2] = 0;
}
}
chan->setMode(mode);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
chan->setChannelGroup((pausable && !SFXPaused) ? PausableSfx : SfxGroup);
chan->setFrequency(freq);
chan->setVolume(vol);
chan->set3DAttributes((FMOD_VECTOR *)pos, (FMOD_VECTOR *)vel);
chan->setPaused(false);
FSoundChan *schan = CommonChannelSetup(chan, true);
schan->DistanceScale = distscale;
return schan;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
DPrintf ("Sound %s failed to play: %d\n", sfx->name.GetChars(), result);
return 0;
}
//==========================================================================
//
// FMODSoundRenderer :: CommonChannelSetup
//
// Assign an end callback to the channel and allocates a game channel for
// it.
//
//==========================================================================
FSoundChan *FMODSoundRenderer::CommonChannelSetup(FMOD::Channel *chan, bool is3d)
{
FSoundChan *schan = S_GetChannel(chan);
chan->setUserData(schan);
chan->setCallback(FMOD_CHANNEL_CALLBACKTYPE_END, ChannelEndCallback, 0);
schan->Is3D = is3d;
GSfxInfo = NULL;
return schan;
}
//==========================================================================
//
// FMODSoundRenderer :: StopSound
//
//==========================================================================
void FMODSoundRenderer::StopSound(FSoundChan *chan)
{
if (chan == NULL)
return;
if (chan->SysChannel != NULL)
{
((FMOD::Channel *)chan->SysChannel)->stop();
}
}
//==========================================================================
//
// FMODSoundRenderer :: SetSfxPaused
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::SetSfxPaused(bool paused)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
if (SFXPaused != paused)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
PausableSfx->setPaused(paused);
SFXPaused = paused;
}
}
//==========================================================================
//
// FMODSoundRenderer :: UpdateSoundParams3D
//
//==========================================================================
void FMODSoundRenderer::UpdateSoundParams3D(FSoundChan *chan, float pos[3], float vel[3])
{
if (chan == NULL || chan->SysChannel == NULL)
return;
FMOD::Channel *fchan = (FMOD::Channel *)chan->SysChannel;
// Sounds at the same location as the listener should be head relative, others
// should be world relative.
if (players[consoleplayer].camera != NULL)
{
FMOD_MODE oldmode, mode;
float cpos[3];
cpos[0] = FIXED2FLOAT(players[consoleplayer].camera->x);
cpos[2] = FIXED2FLOAT(players[consoleplayer].camera->y);
cpos[1] = FIXED2FLOAT(players[consoleplayer].camera->z);
if (FMOD_OK != fchan->getMode(&oldmode))
{
oldmode = FMOD_3D | FMOD_SOFTWARE;
}
if (cpos[0] == pos[0] && cpos[1] == pos[1] && cpos[2] == pos[2])
{
mode = (oldmode & ~FMOD_3D_WORLDRELATIVE) | FMOD_3D_HEADRELATIVE;
pos[0] = 0;
pos[1] = 0;
pos[2] = 0;
}
else
{
mode = (oldmode & ~FMOD_3D_HEADRELATIVE) | FMOD_3D_WORLDRELATIVE;
}
// Only set the mode if it changed.
if (((mode ^ oldmode) & (FMOD_3D_WORLDRELATIVE | FMOD_3D_HEADRELATIVE)) == 0)
{
fchan->setMode(mode);
}
}
fchan->set3DAttributes((FMOD_VECTOR *)pos, (FMOD_VECTOR *)vel);
}
//==========================================================================
//
// FMODSoundRenderer :: ResetEnvironment
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::ResetEnvironment()
- Added some hackery at the start of MouseRead_Win32() that prevents it from yanking the mouse around if they keys haven't been read yet to combat the same situation that causes the keyboard to return DIERR_NOTACQUIRED in KeyRead(): The window is sort of in focus and sort of not. User.dll considers it to be focused and it's drawn as such, but another focused window is on top of it, and DirectInput doesn't see it as focused. - Fixed: KeyRead() should handle DIERR_NOTACQUIRED errors the same way it handles DIERR_INPUTLOST errors. This can happen if our window had the focus stolen away from it before we tried to acquire the keyboard in DI_Init2(). Strangely, MouseRead_DI() already did this. - When a stack overflow occurs, report.txt now only includes the first and last 16KB of the stack to make it more manageable. - Limited StreamEditBinary() to the first 64KB of the file to keep it from taking too long on large dumps. - And now I know why gathering crash information in the same process that crashed can be bad: Stack overflows. You get one spare page to play with when the stack overflows. MiniDumpWriteDump() needs more than that and causes an access violation when it runs out of leftover stack, silently terminating the application. Windows XP x64 offers SetThreadStackGuarantee() to increase this, but that isn't available on anything older, including 32-bit XP. To get around this, a new thread is created to write the mini dump when the stack overflows. - Changed A_Burnination() to be closer to Strife's. - Fixed: When playing back demos, DoAddBot() can be called without an associated call to SpawnBot(). So if the bot can't spawn, botnum can go negative, which will cause problems later in DCajunMaster::Main() when it sees that wanted_botnum (0) is higher than botnum (-1). - Fixed: Stopping demo recording in multiplayer games should not abruptly drop the recorder out of the game without notifying the other players. In fact, there's no reason why it should drop them out of multiplayer at all. - Fixed: Earthquakes were unreliable in multiplayer games because P_PredictPlayer() did not preserve the player's xviewshift. - Fixed: PlayerIsGone() needs to stop any scripts that belong to the player who left, in addition to executing disconnect scripts. - Fixed: APlayerPawn::AddInventory() should also check for a NULL player->mo in case the player left but somebody still has a reference to their actor. - Fixed: DDrawFB::PaintToWindow() should simulate proper unlocking behavior and set Buffer to NULL. - Improved feedback for network game initialization with the console ticker. - Moved i_net.cpp and i_net.h out of sdl/ and win32/ and into the main source directory. They are identical, so keeping two copies of them is bad. - Fixed: (At least with Creative's driver's,) EAX settings are global and not per-application. So if you play a multiplayer ZDoom game on one computer (or even another EAX-using application), ZDoom needs to restore the environment when it regains focus. - Maybe fixed: (See http://forum.zdoom.org/potato.php?t=10689) Apparently, PacketGet can receive ECONNRESET from nodes that aren't in the game. It should be safe to just ignore these packets. - Fixed: PlayerIsGone() should set the gone player's camera to NULL in case the player who left was player 0. This is because if a remaining player receives a "recoverable" error, they will become player 0. Once that happens, they game will try to update sounds through their camera and crash in FMODSoundRenderer::UpdateListener() because the zones array is now NULL. G_NewInit() should also clear all the player structures. SVN r233 (trunk)
2006-06-30 02:13:26 +00:00
{
PrevEnvironment = NULL;
}
//==========================================================================
//
// FMODSoundRenderer :: UpdateListener
//
//==========================================================================
void FMODSoundRenderer::UpdateListener()
{
AActor *listener = players[consoleplayer].camera;
float angle;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_VECTOR pos, vel;
FMOD_VECTOR forward;
FMOD_VECTOR up;
if (listener == NULL)
{
return;
}
vel.x = listener->momx * (TICRATE/65536.f);
vel.y = listener->momz * (TICRATE/65536.f);
vel.z = listener->momy * (TICRATE/65536.f);
pos.x = listener->x / 65536.f;
pos.y = listener->z / 65536.f;
pos.z = listener->y / 65536.f;
angle = (float)(listener->angle) * ((float)PI / 2147483648.f);
forward.x = cosf(angle);
forward.y = 0;
forward.z = sinf(angle);
up.x = 0;
up.y = 1;
up.z = 0;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Sys->set3DListenerAttributes(0, &pos, &vel, &forward, &up);
bool underwater = false;
const ReverbContainer *env;
if (ForcedEnvironment)
{
env = ForcedEnvironment;
}
else
{
underwater = (listener->waterlevel == 3 && snd_waterreverb);
assert (zones != NULL);
env = zones[listener->Sector->ZoneNumber].Environment;
if (env == NULL)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{
env = DefaultEnvironments[0];
}
if (env == DefaultEnvironments[0] && underwater)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
{
env = DefaultEnvironments[22];
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
}
}
if (env != PrevEnvironment || env->Modified)
{
DPrintf ("Reverb Environment %s\n", env->Name);
const_cast<ReverbContainer*>(env)->Modified = false;
Sys->setReverbProperties((FMOD_REVERB_PROPERTIES *)(&env->Properties));
PausableSfx->setPitch(underwater ? 0.64171f : 1);
PrevEnvironment = env;
}
}
//==========================================================================
//
// FMODSoundRenderer :: UpdateSounds
//
//==========================================================================
void FMODSoundRenderer::UpdateSounds()
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
Sys->update();
}
//==========================================================================
//
// FMODSoundRenderer :: LoadSound
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::LoadSound(sfxinfo_t *sfx)
{
if (sfx->data == NULL)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
DPrintf("loading sound \"%s\" (%d) ", sfx->name.GetChars(), sfx - &S_sfx[0]);
getsfx(sfx);
}
}
//==========================================================================
//
// FMODSoundRenderer :: UnloadSound
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::UnloadSound(sfxinfo_t *sfx)
{
if (sfx->data != NULL)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
((FMOD::Sound *)sfx->data)->release();
sfx->data = NULL;
DPrintf("Unloaded sound \"%s\" (%d)\n", sfx->name.GetChars(), sfx - &S_sfx[0]);
}
}
//==========================================================================
//
// FMODSoundRenderer :: GetMSLength
//
//==========================================================================
unsigned int FMODSoundRenderer::GetMSLength(sfxinfo_t *sfx)
{
if (sfx->data == NULL)
{
LoadSound(sfx);
}
if (sfx->data != NULL)
{
unsigned int length;
if (((FMOD::Sound *)sfx->data)->getLength(&length, FMOD_TIMEUNIT_MS) == FMOD_OK)
{
return length;
}
}
return 0; // Don't know.
}
//==========================================================================
//
// FMODSoundRenderer :: DoLoad
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::DoLoad(void **slot, sfxinfo_t *sfx)
{
BYTE *sfxdata;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
BYTE *sfxstart;
int size;
int errcount;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FMOD_RESULT result;
FMOD_MODE samplemode;
FMOD_CREATESOUNDEXINFO exinfo = { sizeof(exinfo), };
FMOD::Sound *sample;
int rolloff;
float mindist, maxdist;
samplemode = FMOD_3D | FMOD_OPENMEMORY | FMOD_SOFTWARE;
if (sfx->MaxDistance == 0)
{
mindist = S_MinDistance;
maxdist = S_MaxDistanceOrRolloffFactor;
rolloff = S_RolloffType;
}
else
{
mindist = sfx->MinDistance;
maxdist = sfx->MaxDistance;
rolloff = sfx->RolloffType;
}
sfxdata = NULL;
errcount = 0;
while (errcount < 2)
{
if (sfxdata != NULL)
{
delete[] sfxdata;
sfxdata = NULL;
}
if (errcount)
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
sfx->lumpnum = Wads.GetNumForName("dsempty", ns_sounds);
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
size = Wads.LumpLength(sfx->lumpnum);
if (size == 0)
{
errcount++;
continue;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
FWadLump wlump = Wads.OpenLumpNum(sfx->lumpnum);
sfxstart = sfxdata = new BYTE[size];
wlump.Read(sfxdata, size);
SDWORD len = ((SDWORD *)sfxdata)[1];
// If the sound is raw, just load it as such.
// Otherwise, try the sound as DMX format.
// If that fails, let FMOD try and figure it out.
if (sfx->bLoadRAW ||
(((BYTE *)sfxdata)[0] == 3 && ((BYTE *)sfxdata)[1] == 0 && len <= size - 8))
{
if (sfx->bLoadRAW)
{
len = Wads.LumpLength (sfx->lumpnum);
sfx->frequency = (sfx->bForce22050 ? 22050 : 11025);
}
else
{
sfx->frequency = ((WORD *)sfxdata)[1];
if (sfx->frequency == 0)
{
sfx->frequency = 11025;
}
sfxstart = sfxdata + 8;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
exinfo.length = len;
exinfo.numchannels = 1;
exinfo.defaultfrequency = sfx->frequency;
exinfo.format = FMOD_SOUND_FORMAT_PCM8;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
samplemode |= FMOD_OPENRAW;
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
// Need to convert sample data from unsigned to signed.
for (int i = 0; i < len; ++i)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
sfxstart[i] = sfxstart[i] - 128;
}
}
else
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
exinfo.length = size;
}
result = Sys->createSound((char *)sfxstart, samplemode, &exinfo, &sample);
if (result == FMOD_ERR_OUTPUT_CREATEBUFFER && !(samplemode & FMOD_SOFTWARE))
{
DPrintf("Trying to fall back to software sample\n");
samplemode = (samplemode & ~FMOD_HARDWARE) | FMOD_SOFTWARE;
result = Sys->createSound((char *)sfxstart, samplemode, &exinfo, &sample);
}
if (result != FMOD_OK)
{
DPrintf("Failed to allocate sample: %d\n", result);
errcount++;
continue;
}
*slot = sample;
// Get frequency and length for sounds FMOD handled for us.
if (!(samplemode & FMOD_OPENRAW))
{
float freq;
result = sample->getDefaults(&freq, NULL, NULL, NULL);
if (result != FMOD_OK)
{
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
DPrintf("Failed getting default sound frequency, assuming 11025Hz\n");
freq = 11025;
}
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
sfx->frequency = (unsigned int)freq;
}
break;
}
if (sample != NULL)
{
if (rolloff == ROLLOFF_Log)
{
maxdist = 10000.f;
}
sample->set3DMinMaxDistance(mindist, maxdist);
sample->setUserData(sfx);
}
if (sfxdata != NULL)
{
delete[] sfxdata;
}
}
//==========================================================================
//
// FMODSoundRenderer :: getsfx
//
// Get the sound data from the WAD and register it with sound library
//
//==========================================================================
VERY IMPORTANT NOTE FOR ANYBODY BUILDING FROM THE TRUNK: This commit adds support for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update your SDKs. GCC users, be sure to do a "make cleandep && make clean" before building, or you will likely get inexplicable errors. - Fixed: If you wanted to make cleandep with MinGW, you had to specifically specify Makefile.mingw as the makefile to use. - Added a normalizer to the OPL synth. It helped bring up the volume a little, but not nearly as much as I would have liked. - Removed MIDI Mapper references. It doesn't work with the stream API, and it doesn't really exist on NT kernels, either. - Reworked music volume: Except for MIDI, all music volume is controlled through GSnd and not at the individual song level. - Removed the mididevice global variable. - Removed snd_midivolume. Now that all music uses a linear volume scale, there's no need for two separate music volume controls. - Increased snd_samplerate default up to 48000. - Added snd_format, defaulting to "PCM-16". - Added snd_speakermode, defaulting to "Auto". - Replaced snd_fpu with snd_resampler, defaulting to "Linear". - Bumped the snd_channels default up from a pitiful 12 to 32. - Changed snd_3d default to true. The new cvar snd_hw3d determines if hardware 3D support is used and default to false. - Removed the libFLAC source, since FMOD Ex has native FLAC support. - Removed the altsound code, since it was terribly gimped in comparison to the FMOD code. It's original purpose was to have been as a springboard for writing a non-FMOD sound system for Unix-y systems, but that never happened. - Finished preliminary FMOD Ex support. SVN r789 (trunk)
2008-03-09 03:13:49 +00:00
void FMODSoundRenderer::getsfx(sfxinfo_t *sfx)
{
unsigned int i;
// If the sound doesn't exist, replace it with the empty sound.
if (sfx->lumpnum == -1)
{
sfx->lumpnum = Wads.GetNumForName("dsempty", ns_sounds);
}
// See if there is another sound already initialized with this lump. If so,
// then set this one up as a link, and don't load the sound again.
for (i = 0; i < S_sfx.Size(); i++)
{
if (S_sfx[i].data && S_sfx[i].link == sfxinfo_t::NO_LINK && S_sfx[i].lumpnum == sfx->lumpnum)
{
DPrintf ("Linked to %s (%d)\n", S_sfx[i].name.GetChars(), i);
sfx->link = i;
return;
}
}
DoLoad(&sfx->data, sfx);
}
//==========================================================================
//
// FMODSoundRenderer :: ChannelEndCallback static
//
// Called when the channel finishes playing.
//
//==========================================================================
FMOD_RESULT F_CALLBACK FMODSoundRenderer::ChannelEndCallback
(FMOD_CHANNEL *channel, FMOD_CHANNEL_CALLBACKTYPE type,
int cmd, unsigned int data1, unsigned int data2)
{
assert(type == FMOD_CHANNEL_CALLBACKTYPE_END);
FMOD::Channel *chan = (FMOD::Channel *)channel;
FSoundChan *schan;
if (chan->getUserData((void **)&schan) == FMOD_OK && schan != NULL)
{
S_ReturnChannel(schan);
}
return FMOD_OK;
}
//==========================================================================
//
// FMODSoundRenderer :: RolloffCallback static
//
// Calculates a volume for the sound based on distance.
//
//==========================================================================
float F_CALLBACK FMODSoundRenderer::RolloffCallback(FMOD_CHANNEL *channel, float distance)
{
FMOD::Channel *chan = (FMOD::Channel *)channel;
FSoundChan *schan;
// Defaults for Doom.
int type = ROLLOFF_Doom;
sfxinfo_t *sfx;
float min;
float max;
float factor;
float volume;
type = S_RolloffType;
factor = S_MaxDistanceOrRolloffFactor;
min = S_MinDistance;
max = S_MaxDistanceOrRolloffFactor;
if (GSfxInfo != NULL)
{
sfx = GSfxInfo;
distance *= GDistScale;
}
else if (chan->getUserData((void **)&schan) == FMOD_OK && schan != NULL)
{
sfx = schan->SfxInfo;
distance *= schan->DistanceScale;
}
else
{
return 0;
}
if (sfx == NULL)
{
return 0;
}
if (sfx->MaxDistance == 0)
{
type = sfx->RolloffType;
factor = sfx->RolloffFactor;
}
chan->get3DMinMaxDistance(&min, &max);
if (distance <= min)
{
return 1;
}
if (type == ROLLOFF_Log)
{ // Logarithmic rolloff has no max distance where it goes silent.
return min / (min + factor * (distance - min));
}
if (distance >= max)
{
return 0;
}
volume = (max - distance) / (max - min);
if (type == ROLLOFF_Custom && S_SoundCurve != NULL)
{
volume = S_SoundCurve[int(S_SoundCurveSize * (1 - volume))] / 127.f;
}
if (type == ROLLOFF_Linear)
{
return volume;
}
else
{
return (powf(10.f, volume) - 1.f) / 9.f;
}
}