gzdoom/src/r_data.cpp

557 lines
14 KiB
C++
Raw Normal View History

/*
** r_data.cpp
**
**---------------------------------------------------------------------------
** Copyright 1998-2008 Randy Heit
** All rights reserved.
**
** Redistribution and use in source and binary forms, with or without
** modification, are permitted provided that the following conditions
** are met:
**
** 1. Redistributions of source code must retain the above copyright
** notice, this list of conditions and the following disclaimer.
** 2. Redistributions in binary form must reproduce the above copyright
** notice, this list of conditions and the following disclaimer in the
** documentation and/or other materials provided with the distribution.
** 3. The name of the author may not be used to endorse or promote products
** derived from this software without specific prior written permission.
**
** THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
** IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
** OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
** IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
** INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
** NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
** DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
** THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
** (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
** THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
**---------------------------------------------------------------------------
**
**
*/
#include "i_system.h"
#include "w_wad.h"
#include "doomdef.h"
#include "r_local.h"
#include "r_sky.h"
#include "c_dispatch.h"
#include "r_data.h"
#include "sc_man.h"
#include "v_text.h"
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
#include "st_start.h"
#include "doomstat.h"
#include "r_bsp.h"
#include "r_segs.h"
#include "v_palette.h"
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
static int R_CountTexturesX ();
static int R_CountLumpTextures (int lumpnum);
extern void R_DeinitBuildTiles();
extern int R_CountBuildTiles();
struct FakeCmap
{
char name[8];
PalEntry blend;
int lump;
};
TArray<FakeCmap> fakecmaps;
BYTE *realcolormaps;
size_t numfakecmaps;
//==========================================================================
//
// R_SetDefaultColormap
//
//==========================================================================
void R_SetDefaultColormap (const char *name)
{
if (strnicmp (fakecmaps[0].name, name, 8) != 0)
{
int lump, i, j;
BYTE map[256];
BYTE unremap[256];
BYTE remap[256];
// [RH] If using BUILD's palette, generate the colormap
if (Wads.CheckNumForFullName("palette.dat") >= 0 || Wads.CheckNumForFullName("blood.pal") >= 0)
{
Printf ("Make colormap\n");
FDynamicColormap foo;
foo.Color = 0xFFFFFF;
foo.Fade = 0;
foo.Maps = realcolormaps;
foo.Desaturate = 0;
foo.Next = NULL;
foo.BuildLights ();
}
else
{
lump = Wads.CheckNumForName (name, ns_colormaps);
if (lump == -1)
lump = Wads.CheckNumForName (name, ns_global);
FWadLump lumpr = Wads.OpenLumpNum (lump);
// [RH] The colormap may not have been designed for the specific
// palette we are using, so remap it to match the current palette.
memcpy (remap, GPalette.Remap, 256);
memset (unremap, 0, 256);
for (i = 0; i < 256; ++i)
{
unremap[remap[i]] = i;
}
// Mapping to color 0 is okay, because the colormap won't be used to
// produce a masked texture.
remap[0] = 0;
for (i = 0; i < NUMCOLORMAPS; ++i)
{
BYTE *map2 = &realcolormaps[i*256];
lumpr.Read (map, 256);
for (j = 0; j < 256; ++j)
{
map2[j] = remap[map[unremap[j]]];
}
}
}
uppercopy (fakecmaps[0].name, name);
fakecmaps[0].blend = 0;
}
}
//==========================================================================
//
// R_InitColormaps
//
//==========================================================================
void R_InitColormaps ()
{
// [RH] Try and convert BOOM colormaps into blending values.
// This is a really rough hack, but it's better than
// not doing anything with them at all (right?)
FakeCmap cm;
cm.name[0] = 0;
cm.blend = 0;
fakecmaps.Push(cm);
DWORD NumLumps = Wads.GetNumLumps();
for (DWORD i = 0; i < NumLumps; i++)
{
if (Wads.GetLumpNamespace(i) == ns_colormaps)
{
char name[9];
name[8] = 0;
Wads.GetLumpName (name, i);
if (Wads.CheckNumForName (name, ns_colormaps) == (int)i)
{
strncpy(cm.name, name, 8);
cm.blend = 0;
cm.lump = i;
fakecmaps.Push(cm);
}
}
}
realcolormaps = new BYTE[256*NUMCOLORMAPS*fakecmaps.Size()];
R_SetDefaultColormap ("COLORMAP");
if (fakecmaps.Size() > 1)
{
BYTE unremap[256], remap[256], mapin[256];
int i;
unsigned j;
memcpy (remap, GPalette.Remap, 256);
memset (unremap, 0, 256);
for (i = 0; i < 256; ++i)
{
unremap[remap[i]] = i;
}
remap[0] = 0;
for (j = 1; j < fakecmaps.Size(); j++)
{
if (Wads.LumpLength (fakecmaps[j].lump) >= (NUMCOLORMAPS+1)*256)
{
int k, r, g, b;
FWadLump lump = Wads.OpenLumpNum (fakecmaps[j].lump);
BYTE *const map = realcolormaps + NUMCOLORMAPS*256*j;
for (k = 0; k < NUMCOLORMAPS; ++k)
{
BYTE *map2 = &map[k*256];
lump.Read (mapin, 256);
map2[0] = 0;
for (r = 1; r < 256; ++r)
{
map2[r] = remap[mapin[unremap[r]]];
}
}
r = g = b = 0;
for (k = 0; k < 256; k++)
{
r += GPalette.BaseColors[map[k]].r;
g += GPalette.BaseColors[map[k]].g;
b += GPalette.BaseColors[map[k]].b;
}
fakecmaps[j].blend = PalEntry (255, r/256, g/256, b/256);
}
}
}
NormalLight.Maps = realcolormaps;
numfakecmaps = fakecmaps.Size();
}
//==========================================================================
//
// R_DeinitColormaps
//
//==========================================================================
void R_DeinitColormaps ()
{
if (realcolormaps != NULL)
{
delete[] realcolormaps;
realcolormaps = NULL;
}
}
//==========================================================================
//
// [RH] Returns an index into realcolormaps. Multiply it by
// 256*NUMCOLORMAPS to find the start of the colormap to use.
// WATERMAP is an exception and returns a blending value instead.
//
//==========================================================================
DWORD R_ColormapNumForName (const char *name)
{
if (strnicmp (name, "COLORMAP", 8))
{ // COLORMAP always returns 0
for(int i=fakecmaps.Size()-1; i > 0; i--)
{
if (!strnicmp(name, fakecmaps[i].name, 8))
{
return i;
}
}
if (!strnicmp (name, "WATERMAP", 8))
return MAKEARGB (128,0,0x4f,0xa5);
}
return 0;
}
//==========================================================================
//
// R_BlendForColormap
//
//==========================================================================
DWORD R_BlendForColormap (DWORD map)
{
return APART(map) ? map :
map < fakecmaps.Size() ? DWORD(fakecmaps[map].blend) : 0;
}
//==========================================================================
//
// R_InitData
// Locates all the lumps that will be used by all views
// Must be called after W_Init.
//
//==========================================================================
void R_InitData ()
{
StartScreen->Progress();
V_InitFonts();
StartScreen->Progress();
R_InitColormaps ();
StartScreen->Progress();
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
}
//===========================================================================
//
// R_GuesstimateNumTextures
//
// Returns an estimate of the number of textures R_InitData will have to
// process. Used by D_DoomMain() when it calls ST_Init().
//
//===========================================================================
int R_GuesstimateNumTextures ()
{
int numtex = 0;
for(int i = Wads.GetNumLumps()-1; i>=0; i--)
{
int space = Wads.GetLumpNamespace(i);
switch(space)
{
case ns_flats:
case ns_sprites:
case ns_newtextures:
case ns_hires:
case ns_patches:
case ns_graphics:
numtex++;
break;
default:
if (Wads.GetLumpFlags(i) & LUMPF_MAYBEFLAT) numtex++;
break;
}
}
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
numtex += R_CountBuildTiles ();
numtex += R_CountTexturesX ();
return numtex;
}
//===========================================================================
//
// R_CountTexturesX
//
// See R_InitTextures() for the logic in deciding what lumps to check.
//
//===========================================================================
static int R_CountTexturesX ()
{
int count = 0;
int wadcount = Wads.GetNumWads();
for (int wadnum = 0; wadnum < wadcount; wadnum++)
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
{
// Use the most recent PNAMES for this WAD.
// Multiple PNAMES in a WAD will be ignored.
int pnames = Wads.CheckNumForName("PNAMES", ns_global, wadnum, false);
// should never happen except for zdoom.pk3
if (pnames < 0) continue;
// Only count the patches if the PNAMES come from the current file
// Otherwise they have already been counted.
if (Wads.GetLumpFile(pnames) == wadnum)
{
count += R_CountLumpTextures (pnames);
}
int texlump1 = Wads.CheckNumForName ("TEXTURE1", ns_global, wadnum);
int texlump2 = Wads.CheckNumForName ("TEXTURE2", ns_global, wadnum);
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
count += R_CountLumpTextures (texlump1) - 1;
count += R_CountLumpTextures (texlump2) - 1;
}
return count;
}
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
//===========================================================================
//
// R_CountLumpTextures
//
// Returns the number of patches in a PNAMES/TEXTURE1/TEXTURE2 lump.
//
//===========================================================================
static int R_CountLumpTextures (int lumpnum)
{
if (lumpnum >= 0)
{
FWadLump file = Wads.OpenLumpNum (lumpnum);
DWORD numtex;
file >> numtex;
return numtex >= 0 ? numtex : 0;
}
return 0;
}
//===========================================================================
//
// R_DeinitData
//
//===========================================================================
void R_DeinitData ()
{
R_DeinitColormaps ();
2006-05-16 02:50:18 +00:00
R_DeinitBuildTiles();
FCanvasTextureInfo::EmptyList();
// Free openings
if (openings != NULL)
{
M_Free (openings);
openings = NULL;
}
// Free drawsegs
if (drawsegs != NULL)
{
M_Free (drawsegs);
drawsegs = NULL;
}
}
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
//===========================================================================
//
// R_PrecacheLevel
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
//
// Preloads all relevant graphics for the level.
//
Note: I have not tried compiling these recent changes under Linux. I wouldn't be surprised if it doesn't work. - Reorganized the network startup loops so now they are event driven. There is a single function that gets called to drive it, and it uses callbacks to perform the different stages of the synchronization. This lets me have a nice, responsive abort button instead of the previous unannounced hit-escape-to- abort behavior, and I think the rearranged code is slightly easier to understand too. - Increased the number of bytes for version info during D_ArbitrateNetStart(), in preparation for the day when NETGAMEVERSION requires more than one byte. - I noticed an issue with Vista RC1 and the new fatal error setup. Even after releasing a DirectDraw or Direct3D interface, the DWM can still use the last image drawn using them when it composites the window. It doesn't always do it but it does often enough that it is a real problem. At this point, I don't know if it's a problem with the release version of Vista or not. After messing around, I discovered the problem was caused by ~Win32Video() hiding the window and then having it immediately shown soon after. The DWM kept an image of the window to do the transition effect with, and then when it didn't get a chance to do the transition, it didn't properly forget about its saved image and kept plastering it on top of everything else underneath. - Added a network synchronization panel to the window during netgame startup. - Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL. Otherwise, classic DECORATE definitions generate a big, fat crash. - Resurrected the R_Init progress bar, now as a standard Windows control. - Removed the sound failure dialog. The FMOD setup already defaulted to no sound if initialization failed, so this only applies when snd_output is set to "alternate" which now also falls back to no sound. In addition, it wasn't working right, and I didn't feel like fixing it for the probably 0% of users it affected. - Fixed: The edit control used for logging output added text in reverse order on Win9x. - Went back to the roots and made graphics initialization one of the last things to happen during setup. Now the startup text is visible again. More importantly, the main window is no longer created invisible, which seems to cause trouble with it not always appearing in the taskbar. The fatal error dialog is now also embedded in the main window instead of being a separate modal dialog, so you can play with the log window to see any problems that might be reported there. Rather than completely restoring the original startup order, I tried to keep things as close to the way they were with early graphics startup. In particular, V_Init() now creates a dummy screen so that things that need screen dimensions can get them. It gets replaced by the real screen later in I_InitGraphics(). Will need to check this under Linux to make sure it didn't cause any problems there. - Removed the following stubs that just called functions in Video: - I_StartModeIterator() - I_NextMode() - I_DisplayType() I_FullscreenChanged() was also removed, and a new fullscreen parameter was added to IVideo::StartModeIterator(), since that's all it controlled. - Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's initialized post-1.22. SVN r416 (trunk)
2006-12-19 04:09:10 +00:00
//===========================================================================
void R_PrecacheLevel (void)
{
BYTE *hitlist;
BYTE *spritelist;
int i;
if (demoplayback)
return;
hitlist = new BYTE[TexMan.NumTextures()];
spritelist = new BYTE[sprites.Size()];
// Precache textures (and sprites).
memset (hitlist, 0, TexMan.NumTextures());
memset (spritelist, 0, sprites.Size());
{
AActor *actor;
TThinkerIterator<AActor> iterator;
while ( (actor = iterator.Next ()) )
spritelist[actor->sprite] = 1;
}
for (i = (int)(sprites.Size () - 1); i >= 0; i--)
{
if (spritelist[i])
{
int j, k;
for (j = 0; j < sprites[i].numframes; j++)
{
const spriteframe_t *frame = &SpriteFrames[sprites[i].spriteframes + j];
for (k = 0; k < 16; k++)
{
FTextureID pic = frame->Texture[k];
if (pic.isValid())
{
hitlist[pic.GetIndex()] = 1;
}
}
}
}
}
delete[] spritelist;
for (i = numsectors - 1; i >= 0; i--)
{
hitlist[sectors[i].GetTexture(sector_t::floor).GetIndex()] =
hitlist[sectors[i].GetTexture(sector_t::ceiling).GetIndex()] |= 2;
}
for (i = numsides - 1; i >= 0; i--)
{
hitlist[sides[i].GetTexture(side_t::top).GetIndex()] =
hitlist[sides[i].GetTexture(side_t::mid).GetIndex()] =
hitlist[sides[i].GetTexture(side_t::bottom).GetIndex()] |= 1;
}
// Sky texture is always present.
// Note that F_SKY1 is the name used to
// indicate a sky floor/ceiling as a flat,
// while the sky texture is stored like
// a wall texture, with an episode dependant
// name.
if (sky1texture.isValid())
{
hitlist[sky1texture.GetIndex()] |= 1;
}
if (sky2texture.isValid())
{
hitlist[sky2texture.GetIndex()] |= 1;
}
for (i = TexMan.NumTextures() - 1; i >= 0; i--)
{
screen->PrecacheTexture(TexMan.ByIndex(i), hitlist[i]);
}
delete[] hitlist;
}
//==========================================================================
//
// R_GetColumn
//
//==========================================================================
const BYTE *R_GetColumn (FTexture *tex, int col)
{
return tex->GetColumn (col, NULL);
}
//==========================================================================
//
// Debug stuff
//
//==========================================================================
#ifdef _DEBUG
// Prints the spans generated for a texture. Only needed for debugging.
CCMD (printspans)
{
if (argv.argc() != 2)
return;
FTextureID picnum = TexMan.CheckForTexture (argv[1], FTexture::TEX_Any);
if (!picnum.Exists())
{
Printf ("Unknown texture %s\n", argv[1]);
return;
}
FTexture *tex = TexMan[picnum];
for (int x = 0; x < tex->GetWidth(); ++x)
{
const FTexture::Span *spans;
Printf ("%4d:", x);
tex->GetColumn (x, &spans);
while (spans->Length != 0)
{
Printf (" (%4d,%4d)", spans->TopOffset, spans->TopOffset+spans->Length-1);
spans++;
}
Printf ("\n");
}
}
CCMD (picnum)
{
//int picnum = TexMan.GetTexture (argv[1], FTexture::TEX_Any);
//Printf ("%d: %s - %s\n", picnum, TexMan[picnum]->Name, TexMan(picnum)->Name);
}
#endif