- replaced some uses of FRACUNIT with OPAQUE when it was about translucency.
- simplified some overly complicated translucency multiplications in the SBARINFO code.
- Converted P_MovePlayer and all associated variables to floating point because this wasn't working well with a mixture between float and fixed.
Like the angle commit this has just been patched up to compile, the bulk of work is yet to be done.
Patched up everything so that it compiles without errors again. This only addresses code related to some compile error. A large portion of the angle code still uses angle_t and converts back and forth.
- fixed: P_FindFloorCeiling set the floorsector for a new ceilingheight.
Note: P_DrawRailTrail still needs to be changed, at the moment rail trails through portals will not work correctly.
int SpawnDecal(int tid, str decalname, int flags, fixed angle, int zoffset, int distance)
Traces a line from tid's actor until hitting a wall, then creates a decal there. Returns the
number of decals spawned.
* tid = Which actor(s) to start the trace at.
* decalname = Which decal to spawn.
* flags =
* SDF_ABSANGLE = Angle parameter is an absolute angle. Otherwise, it's relative to the origin actor's angle.
* SDF_PERMANENT = Decal ignores cl_maxdecals. Otherwise, it will eventually disappear.
* angle = Direction in which to search for a wall. Defaults to 0.0.
* zoffset = Offset from the middle of the origin actor for the Z height of the decal. Defaults to 0.
* distance = Maximum distance to search for a wall. Defaults to 64.
SVN r4330 (trunk)
were flagged not to have decals.
- Fixed: DBaseDecal/DImpactDecal::CloneSelf never checked the return value
from their StickToWall call and left unplaced decals behind if that happened.
SVN r2046 (trunk)
but should use the camera position instead to get the correct position for
the closest point along the trail.
- Fixed: Explosions no longer caused splashes.
- Fixed: Copying translations to lower decals had the shade color check wrong.
- Fixed: Waggling floors did not move attached geometry.
- Cleaned up p_floor.cpp so that related parts of the code are grouped together.
SVN r1926 (trunk)
- fixed: The BossCube could be blocked by floors and ceiling resulting
in incorrect movement. I changed it so that A_BrainSpit now sets the
MF5_NOINTERACTION flag for anything it spawns that has the MF_NOCLIP
flag. For travelling cubes active collision detection makes no sense
and only causes problems. This should also make the boss brain
work in the other games which previously were excluded by a game mode
check in the movement code.
- fixed: ACS's GetUserVariable did not work for the script activator.
- fixed: Moving floors could be blocked by 2 actors without MF2_PASSMOBJ
overlapping each other (common mapping bug, check Herian 2 MAP30.)
SVN r1891 (trunk)
- fixed: Floor and ceiling hugger projectiles should not be spawned with ONFLOORZ or ONCEILINGZ
because that will make them ignore the actual floor height if it differs from the sector's floor.
- fixed: Floor and ceiling huggers spawned by a player did not get their vertical velocity set to 0.
- some sidenum related changes in inactive 3D floor code.
SVN r1802 (trunk)
so that all files are included by a central one instead of compiling
each one separately. This speeds up the compilation process by 25%
when doing a complete rebuild in Visual C.
- Cleaned up more header dependencies.
SVN r1226 (trunk)
that animated icons can be done with it.
- Changed FImageCollection to use a TArray to hold its data.
- Fixed: SetChanHeadSettings did an assignment instead of comparing
the channel ID witg CHAN_CEILING.
- Changed sound sequence names for animated doors to FNames.
- Automatically fixed: DCeiling didn't properly serialize its texture id.
- Replaced integers as texture ID representation with a specific new type
to track down all potentially incorrect uses and remaining WORDs used
for texture IDs so that more than 32767 or 65535 textures can be defined.
SVN r1036 (trunk)
of type MiscPatch with the same name.
- Added UDMF line trigger types MonsterUse and MonsterPush.
- Separated skill and class filter bits from FMapThing::flags so that
UDMF can define up to 16 of each. Also separated easy/baby and
hard/nightmare and changed default MAPINFO definitions.
- Changed: Crosshair drawing uses the current player class's default health instead
of 100 to calculate the color for the crosshair.
- Added SECF_NOFALLINGDAMAGE flag plus Sector_ChangeFlags to set it. Also separated
all user settable flags from MoreFlags into their own Flags variable.
SVN r964 (trunk)
Since it uses fixed point parameters it can only be used in scripts though.
- Added flags parameters to all wall scroller specials that didn't use
all 5 args.
- Separated scrolling of the 3 different texture parts of a sidedef.
While doing this I did some more restructuring of the sidedef structure
and changed it so that all state changes to sidedefs that affect rendering
have to be made with access functions. This is not of much use to the
software renderer but it allows far easier caching of rendering data
for OpenGL because the only place I need to check is in the access functions.
SVN r832 (trunk)
- Added .txt files to the list of types (wad, zip, and pk3) that can be
loaded without listing them after -file.
- Fonts that are created by the ACS setfont command to wrap a texture now
support animated textures.
- FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn
with the hardware 2D path instead of being restricted to the game palette.
- Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1
on a Radeon 9000.
- Added back the off-by-one palette handling, but in a much more limited
scope than before. The skipped entry is assumed to always be at 248, and
it is assumed that all Shader Model 1.4 cards suffer from this. That's
because all SM1.4 cards are based on variants of the ATI R200 core, and the
RV250 in a Radeon 9000 craps up like this. I see no reason to assume that
other flavors of the R200 are any different. (Interesting note: With the
Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the
debug Direct3D 9 runtime, but it works perfectly fine with the retail
Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its
math inside pixel shaders. That would explain perfectly why I can't use
constants greater than 1 with PS1.4 and why it can't do an exact mapping to
every entry in the color palette.
- Fixed: The software shaded drawer did not work for 2D, because its selected
"color"map was replaced with the identitymap before being used.
- Fixed: I cannot use Printf to output messages before the framebuffer was
completely setup, meaning that Shader Model 1.4 cards could not change
resolution.
- I have decided to let remap palettes specify variable alpha values for
their colors. D3DFB no longer forces them to 255.
- Updated re2c to version 0.12.3.
- Fixed: A_Wander used threshold as a timer, when it should have used
reactiontime.
- Fixed: A_CustomRailgun would not fire at all for actors without a target
when the aim parameter was disabled.
- Made the warp command work in multiplayer, again courtesy of Karate Chris.
- Fixed: Trying to spawn a bot while not in a game made for a crashing time.
(Patch courtesy of Karate Chris.)
- Removed some floating point math from hu_scores.cpp that somebody's GCC
gave warnings for (not mine, though).
- Fixed: The SBarInfo drawbar command crashed if the sprite image was
unavailable.
- Fixed: FString::operator=(const char *) did not release its old buffer when
being assigned to the null string.
- The scanner no longer has an upper limit on the length of strings it
accepts, though short strings will be faster than long ones.
- Moved all the text scanning functions into a class. Mainly, this means that
multiple script scanner states can be stored without being forced to do so
recursively. I think I might be taking advantage of that in the near
future. Possibly. Maybe.
- Removed some potential buffer overflows from the decal parser.
- Applied Blzut3's SBARINFO update #9:
* Fixed: When using even length values in drawnumber it would cap to a 98
value instead of a 99 as intended.
* The SBarInfo parser can now accept negatives for coordinates. This
doesn't allow much right now, but later I plan to add better fullscreen
hud support in which the negatives will be more useful. This also cleans
up the source a bit since all calls for (x, y) coordinates are with the
function getCoordinates().
- Added support for stencilling actors.
- Added support for non-black colors specified with DTA_ColorOverlay to the
software renderer.
- Fixed: The inverse, gold, red, and green fixed colormaps each allocated
space for 32 different colormaps, even though each only used the first one.
- Added two new blending flags to make reverse subtract blending more useful:
STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that
gets blended with the background, since that seems like a good idea for
reverse subtraction. They also work with the other two blending operations.
- Added subtract and reverse subtract blending operations to the renderer.
Since the ERenderStyle enumeration was getting rather unwieldy, I converted
it into a new FRenderStyle structure that lets each parameter of the
blending equation be set separately. This simplified the set up for the
blend quite a bit, and it means a number of new combinations are available
by setting the parameters properly.
SVN r710 (trunk)
- The stat meters now return an FString instead of sprintfing into a fixed
output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
- For consistancy with the other integral types, byte is no longer a
synonym for BYTE.
- Most uses of BOOL have been change to the standard C++ bool type. Those
that weren't were changed to INTBOOL to indicate they may contain values
other than 0 or 1 but are still used as a boolean.
- Compiler-provided types with explicit bit sizes are now used. In
particular, DWORD is no longer a long so it will work with both 64-bit
Windows and Linux.
- Since some files need to include Windows headers, uint32 is a synonym
for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
was all it contained.
SVN r326 (trunk)
ReplaceTextures (str old_texture, str new_texture, optional bool not_lower,
optional bool not_mid, optional bool not_upper, optional bool not_floor,
optional bool not_ceiling); and
SectorDamage (int tag, int amount, str type, bool players_only, bool in_air,
str protection_item, bool subclasses_okay);
- Added the vid_nowidescreen cvar to disable widescreen aspect ratio
correction. When this is enabled, the only display ratio available is 4:3
(and 5:4 if vid_tft is set).
- Added support for setting an actor's damage property to an expression
through decorate. Just enclose it within parentheses, and the expression
will be evaluated exactly as-is without the normal Doom damage calculation.
So if you want something that does exactly 6 damage, use a "Damage (6)"
property. To deal normal Doom missile damage, you can use
"Damage (random(1,8)*6)" instead of "Damage 6".
- Moved InvFirst and InvSel into APlayerPawn so that they can be consistantly
maintained by ObtainInventory.
SVN r288 (trunk)
- Converted A_Hexendecorations.cpp
- Changed the lower decal spawning code to transfer the main decal's color if
the lower decal's default color is the same as the main decal's.
- Changed the decal stretcher back to use the specified size parameters as a
scaling factor and not a destination size because this is more consistent with
the rest of the decal code. Also adjusted the blood smear definition in DECALDEF
and the description in the Wiki for this.
- Added Jim's most recent fixes.
SVN r77 (trunk)
your head has popped off your body.
- Fixed: When item respawning is on and you play on skill 1 or 5, picking
up ammo would permanently double the amount of ammo received from that
item the next time it gets picked up.
- Added a check to PlayerIsGone() for players who have already had their
actors destroyed before calling it.
- Fixed: G_CheckDemoStatus() only restored your name, autoaim, and color
settings after playing back a demo.
- Added DEM_SPRAY net command so that sprayed decals work in multiplayer
and demos.
- Changed DEM_GIVECHEAT to use a word for specifying the item quantity.
This is useful mainly for giving yourself more than 255 health at a time.
- Fixed: DEM_SUMMONFRIEND was not handled by Net_SkipCommand().
SVN r58 (trunk)
- Changed: Decal scales now use full precision fixed point numbers.
- Changed: Keeping impact decals in their own statlist is enough to keep track
of them for when one needs to be destroyed. There's no need to maintain a
separate list for them.
- Fixed: Decal actors did not spread their decals across neighboring walls.
- Fixed: Decal groups did not initialize their IDs and could not be reliably
used with the decal actor.
- Fixed: Decals on moving polyobjects were not interpolated. R_RenderDecal()
now uses the decal's LeftDistance to calculate its visible location, so it
always stays in sync with the wall's vertices. This also lets me dump some
code from the polyobjects that maintained the decals' (x, y) coordinates.
Also, the decals' x and y information is redundant and can be removed.
Doing this revealed a bug with slider decals and horizontal sliding:
That is, it didn't work at all. I have opted to simply remove the horizontal
sliding support so that I don't have to worry about what happens when a
decal slides across the edge of a wall.
- Fixed: DBaseDecal::LeftDistance was calculated as a 30.2 fixed point number.
It should be 2.30 fixed point.
SVN r35 (trunk)
returning from one function to another function when the function that
was called was used as part of an expression.
- Fixed: Using Thing_Hate with arg0 (hater) set to 0 from an open script
could crash.
- Fixed: Some items along ledges in Hexen's MAP32 (Orchard of Lamentations)
appeared at the bottom of the ledge (and consequently inside it) instead
of on top of it because the items were placed directly on the lines.
AActor::LinkToWorldForMapThing() needs to use the original R_PointOnLineSide()
code to handle situations like this. Previously, it just used the original
code for straight horizontal/vertical lines and used the new code for
diagonal lines.
- Fixed: FWadCollection::MergeLumps() used in incorrect realloc.
- Fixed: FPlayList::NextLine() did not properly handle blank lines in the
playlist.
- Changed: Decals now use lightweight thinkers instead of actors. (76 bytes
versus 396, so you save 320k if you have 1024 decals present.)
- Fixed: Wads added with pullin were loaded immediately after the IWAD.
Exec files are now processed immediately before -file but after autoloading
wads in D_DoomMain().
- Fixed: sdl/i_system.h unconditionally defined SHARE_DIR, preventing
redefinition from the command line.
- Fixed: The standard way to include SDL.h is <SDL.h>, not <SDL/SDL.h>.
- Fixed: Returned FActiveInterpolation::HashKey()'s return type to size_t,
avoiding a pointer truncation warning.
SVN r30 (trunk)
