This is only the parsing part, the arrays are not yet getting evaluated.
This required quite a hacky workaround because the gramma couldn't be made to accept the rule. The scanner will check if a 'static' token is immediately followed by a 'const' token and will combine both to a new 'staticconst' token that does not create conflicts with other rules.
This method was chosen because it avoids adding variable declarations to the global namespace which would have required a lot more work while polluting the grammar.
This way the global variables can be handled by a small bit of special coding in the struct generator.
- handle these powerups by actual item checks instead of cheat flags. (The same should also be done for the Frightener and Buddha but those are a bit more complex because they are also real cheats.)
- do not resolve the backdrop texture to a texture ID at load time. This will allow custom menu classes to use this info differently.
- added a new ZSDF userstring property to dialog pages to give mods more means for customization.
- allow overriding the conversation menu class both globally through MAPINFO and per conversation in ZSDF.
1) When used in a hub, returning to a previous level in the hub deactivated the runes if they were a permanent powerup.
2) When picking up two different runes with the same effect, one rune wearing off removed the effect completely.
3) This entire system was done through an extremely hacky CheatFlags implementation. This was a gross hack, and it was no wonder it didn't always work properly.
This should for now conclude actor class scriptification. The remaining ten classes with the exception of MorphedMonster are all too essential or too closely tied to engine feature so they should remain native.
* completely scriptified DehackedPickup and FakeInventory.
* scriptified all remaining virtual functions of Inventory, so that its inheritance is now 100% script-side.
* scriptified CallTryPickup and most of the code called by that.
- fixed: Passing local variables by reference did not work in the VM.
- replaced Key.KeyNumber with special1. This is only for internal bookkeeping purposes so there's really no need to complicate this with a new variable when this one works just as well.
- added some helpers to set scripted member variables through the native property parser.
Unfortunately some classes, e.g. PowerMorph, MorphProjectile and the powerup contain some that cannot be handled through the 'property' definition on the script side so they need to be done from the native side.
- created script exports for all relevant functions with all integral types.
- created script side definitions for the underlying data types.
- added a void pointer type so that the prototype for the pointer array can use a generic type every pointer can be assigned to.
- for explicitly defined glows, use the one for the current animation frame, if an animated texture is active. For default glows it will still use the base texture's to avoid inconsistencies.
* It will now use #include, just like most other definition formats and can be mixed with regular definitions. However, due to how the Lemon-generated parser works this will not recursively pull in all files, but store them in a list and process them sequentially. Functionally this shouldn't make a difference, because ZScript is mostly order-independent - the only thing where order is important is native classes, but these are completely internal to zdoom.pk3 where proper order is observed.
- fixed: Assignment from a readonly to a read-allowed pointer must be an error.
- made GetDefaultByType a builtin so that it can do proper type assignment to the result, which for a function would be problematic in this case, even if automatic type deduction was implemented. Since this returns the class defaults which are not a real object, the result cannot be subjected to a type cast.
- error out if a type cast of a readonly pointer is attempted.
- fixed: FxBooleanNot could clobber a local variable because it used the source register to manipulate the result.
- fixed issues with the refactoring of the recent commits. This one starts again.
- added builtins for TextureID.
Note about builtins: Currently they are just hacked into the compiler backend. They really should be made part of the respective types to keep matters clean and allow more widespread use of builtins to create more efficient code.
- Took the opportunity and fixed the logic for the Skull Rod's rain spawner. The old code which was part of the 3D floor submission was unable to work with portals at all. The new approach no longer tries to hide the dead projectile in the ceiling, it leaves it where it is and changes a few flags, so that its z-position can be used as reference to get the actual ceiling. This works for line portals, but for sector portals still requires some changes to sector_t::NextHighestCeilingAt to work, but at least this can be made to work unlike the old code.
- added names for the player-related translations to A_SetTranslation.
- fixed: Failure to resolve a function argument was checked for, too late.
- made the parameter for A_SetTranslation a name instead of a string, because it is more efficient. We do not need full strings here.
- scriptified all Effect functions of Fastprojectile's children
- implemented access to class meta data.
- added a VM instruction to retrieve the class metadata, to eliminate the overhead of the function call that would otherwise be needed.
- made GetClass() a builtin so that it can use the new instruction
Important note about this commit: Scriptifying CFlameMissile::Effect revealed a problem with the virtual function interface: In order to work, this needs to be explicitly enabled for each single native class that may be used as a base for a scripted class. Needless to say, this will end up way too much work, as there are over 100 native classes, excluding those which will be scriptified. But in order to fix the problem this partially broken state needs to be committed first.
- fixed: FxAssignSelf did not the correct number of registers for vector operations.
- fixed a few asserts in vector2 instructions.
- turned the virtual AActor::HitFloor method into a flag MF7_SMASHABLE. The only use of this function was to kill Hexen's pottery when they hit the floor, and this looks like something that can be exposed to modders less clumsily.
- added new VARF_Transient flag so that the decision whether to serialize a field does not depend solely on its native status. It may actually make a lot of sense to use the auto-serializer for native fields, too, as this would eliminate a lot of maintenance code.
- defined (u)int8/16 as aliases to the byte and short types (Can't we not just get rid of this naming convention already...?)
- exporting the fields of Actor revealed a few name clashes between them and some global types, so Actor.Sector was renamed to CurSector and Actor.Inventory was renamed to Actor.Inv.
- changed Dehacked weapon function lookup to check the symbol table instead of directly referencing the VM functions. Once scriptified these pointers will no longer be available.
- removed all special ATAGs from the VM. While well intentioned any pointer tagged with them is basically unusable because it'd trigger asserts all over the place.
- scriptified A_Punch for testing pass-by-reference parameters and stack variables.
- added state usage specifiers to Actor and Inventory. The states in these classes must be set to full access so that any existing mod can link to them.
This appears to be the only case where an actor was set to a state owned by a completely unrelated actor which would present some problems with state owner checking in AActor::SetState, so let's better get rid of it ASAP.
I believe the only reason this wasn't changed when all actors were exported 8 years ago was that old binary DEHSUPP lump.
This could cause problems with functions that take states as parameters but use them to set them internally instead of passing them through the A_Jump interface back to the caller, like A_Chase or A_LookEx.
This required some quite significant refactoring because the entire state resolution logic had been baked into the compiler which turned out to be a major maintenance problem.
Fixed this by adding a new builtin type 'statelabel'. This is an opaque identifier representing a state, with the actual data either directly encoded into the number for single label state or an index into a state information table.
The state resolution is now the task of the called function as it should always have remained. Note, that this required giving back the 'action' qualifier to most state jumping functions.
- refactored most A_Jump checkers to a two stage setup with a pure checker that returns a boolean and a scripted A_Jump wrapper, for some simpler checks the checker function was entirely omitted and calculated inline in the A_Jump function. It is strongly recommended to use the boolean checkers unless using an inline function invocation in a state as they lead to vastly clearer code and offer more flexibility.
- let Min() and Max() use the OP_MIN and OP_MAX opcodes. Although these were present, these function were implemented using some grossly inefficient branching tests.
- the DECORATE 'state' cast kludge will now actually call ResolveState because a state label is not a state and needs conversion.
Added two new sub-blocks for Choice blocks: Require and Exclude.
The syntax for both is the same as Cost blocks.
Require defines what item must be present in your inventory in order to show this choice/reply.
Exclude defines what item must not be present in your inventory in order to show this choice/reply.
If any Require/Exclude blocks are defined then this choice/reply will be hidden until all blocks of both types are satisfied.
- removed the bogus optional value from the first A_Jump argument. A quick test with an older ZDoom revealed that this was never working - and implementing it would make things a lot more complicated, especially error checking in the code generator.
- fixed: The check for insufficient parameters to a function call was missing.
- added initializer syntax for vectors. A vector can be set with vectorvar = (x,y,z); for a 3-dimensional vector and vectorvar = (x, y); for a 2-dimensional one.
- added master and tracer to the list of exported variables.
- fixed: 'none' as class type must map to the real null pointer so that it won't get rejected by the stricter type checks.
- added handling for member function calls to zcc_compile.cpp.
- fixed: FxMemberFunctionCall may not delete the self expression if it gets passed on to the actual function call.
* Allow PFunction to work without a VMFunction being attached.
* The Variant for a function must store the prototype itself instead of relying on the VMFunction it points to. Otherwise it would not be possible to reference a prototype during compilation of the function because it does not exist yet.
* Give the variant a list of the function's argument's names, because these are also needed to compile the function.
* create an anonymous function symbol when the function gets registered to the builder. At this point we have all the needed information to set it up correctly, but later this is no longer the case. This is the most convenient info to have here because it contains everything that's needed to compile the function in the proper context, so it has to be present when starting compilation.
* added some preparations to implement special handling for weapons and custom inventory items, which can run action functions in another actor's context. This part is not active yet but the basics are present in SetImplicitArgs.
- switched the types of the internal 'self' and 'stateowner' parameters so that they get assigned correctly. I can't tell if this will error out if fields get accessed from the caller with the wrong class, but for actual scripting to work these must be correct.
The committed 'actor.txt' can be parsed successfully, with the exception of a few subclass references that cannot be resolved yet.
The state is undefined by default to preserve the original behavior of having the weapon layer deleted which modders can now avoid by defining it properly
- DECORATE now has atan2(y,x) and VectorAngle(x,y) functions. They are
identical except for the order of their parameters. The returned angle
is in degrees (not radians).
- Split specific parsing for each intrinsic out of ParseExpression0 and
into their own functions.
- Instead of reserving keywords for intrinsics, identify them by name
within TK_Identifier's handling.
- This is an effort to emphasize that these are just type casts. Now they
look like function-style casts with no action function styling.
They do no magic joojoo at all. The only reason they exist is because
the DECORATE parser can only parse return statements that call a
function, so these satisfy that requirement. i.e. *return int(666);* is
identical to *return 666;* (if the parser could handle the latter).
'ceilingterrain' is needed because the top of 3D-floors refers to the model sector's ceiling, so in order to give a 3D floor a terrain it must be assignable to the sector's ceiling.
Note that although it is basically the same property, its actual function bears no relevance to its use in Eternity.
