Commit graph

39 commits

Author SHA1 Message Date
Christoph Oelckers
3a198a29dc - fixed: fullscreen images with texture scaling used the unscaled size for
positioning. To avoid future problems with them I added a new DTA_Fullscreen
  option for DrawTexture.


SVN r1983 (trunk)
2009-11-15 14:33:35 +00:00
Randy Heit
f1a672254d - Fixed: Do not use scaled texture width when calculating xiscale.
SVN r1968 (trunk)
2009-11-10 03:40:54 +00:00
Randy Heit
de8ec46c06 - Fixed: R_GetOneSkyColumn() and R_GetTwoSkyColumns are mulscaling an
unsigned integer that can use all 32 bits. They must therefore use
  the unsigned mul instruction rather than the signed imul instruction.
- Fixed several signed/unsigned comparison and possibly uninitialized
  variable warnings flagged by GCC.


SVN r1965 (trunk)
2009-11-08 02:51:22 +00:00
Randy Heit
4ebfdac887 - Changed all coordinates for DrawTexture() to floating point so that the
player sprites will retain the same precision they had when they were
  rendered as part of the 3D view. (needed for propery alignment of flashes
  on top of weapon sprites) It worked just fine for D3D, but software
  rendering was another matter. I consequently did battle with imprecisions
  in the whole masked texture drawing routines that had previously been
  partially masked by only drawing on whole pixel boundaries. Particularly,
  the tops of posts are calculated by multiplying by spryscale, and the
  texture mapping coordinates are calculated by multiplying by dc_iscale
  (where dc_iscale = 1 / spryscale). Since these are both 16.16 fixed point
  values, there is a significant variance. For best results, the drawing
  routines should only use one of these values, but that would mean
  introducing division into the inner loop. If the division removed the
  necessity for the fudge code in R_DrawMaskedColumn(), would it be worth it?
  Or would the divide be slower than the fudging? Or would I be better off
  doing it like Build and using transparent pixel checks instead, not
  bothering with skipping transparent areas? For now, I chop off the
  fractional part of the top coordinate for software drawing, since it was
  the easiest thing to do (even if it wasn't the most correct thing to do).


SVN r1955 (trunk)
2009-11-01 01:27:33 +00:00
Christoph Oelckers
c285f38a02 - Fixed: When drawing with a special colormap the quad's flags weren't cleared
which could cause crashes.
- Added custom special colormaps to DECORATE.
- Cleaned up special colormap code and removed lots of dependencies on the
  knowledge of the tables' contents.



SVN r1860 (trunk)
2009-09-21 13:15:36 +00:00
Randy Heit
b8eb530a0d - Fixed: Wall drawing handled fixed light levels improperly (but did not
completely ignore them, either).
- Separated light level fixing out of player_t's fixedcolormap parameter.
  Using a fixed light level (e.g. PowerTorch) will no longer wipe out
  colored lighting.
- Moved the blending rectangle drawing into a separate discrete stage, since
  doing it while copying the 3D view window to the display now blends
  underneath the weapon instead of on top of it.
- Consolidated the special colormaps into a single 2D table.
- Tweaked the special colormaps slightly to make the true color results more
  closely match the paletted approximations.
- fb_d3d9_shaders.h was getting unwieldy, so I moved the shaders out of the
  executable and into zdoom.pk3. Shaders are still precompiled so I don't need
  to pull in a dependancy on D3DX.
- Added a few more shaders to accomodate drawing weapons with all the in-game
  lighting models. These are accessed with the new DrawTexture tags
  DTA_SpecialColormap and DTA_ColormapStyle.
- Player weapon sprites are now drawn using Direct3D and receive all the
  benefits thereof.


SVN r1858 (trunk)
2009-09-20 03:50:05 +00:00
Randy Heit
33a397c04b - Basic Mac support: Everything compiles but does not yet link.
SVN r1780 (trunk)
2009-09-01 02:08:53 +00:00
Randy Heit
d3e1199c8f - Fixed: Not all control paths through DCanvas::ParseDrawTextureTags() called va_end.
- Moved the va_copy check out of the non-Win32 part of CMakeLists.txt so that it gets
  used for MinGW, too.

SVN r1527 (trunk)
2009-04-08 04:47:21 +00:00
Christoph Oelckers
a908834a11 - added some default definitions for constants that may miss in some headers.
- replaced __va_copy with va_copy per Chris's suggestion.
- replaced #include <malloc.h> with #include <stdlib.h> where possible.


SVN r1524 (trunk)
2009-04-07 07:06:07 +00:00
Christoph Oelckers
760f70d3f1 - Changed compilation for g_doom, g_heretic, g_hexen and g_strife folders
so that all files are included by a central one instead of compiling 
  each one separately. This speeds up the compilation process by 25%
  when doing a complete rebuild in Visual C.
- Cleaned up more header dependencies.

SVN r1226 (trunk)
2008-09-15 14:11:05 +00:00
Christoph Oelckers
db5723997c - Cleaned up some include dependencies.
SVN r1224 (trunk)
2008-09-14 23:54:38 +00:00
Randy Heit
ff43b7e913 - Added coordinate range checking to DCanvas::ParseDrawTextureTags() to avoid
potential crashes in the situation that con_scaletext is 2 and somebody
  uses a hud message as if a hud size was specified, but forgot to actually
  set the hud size.


SVN r1010 (trunk)
2008-06-01 04:09:49 +00:00
Randy Heit
10c0d67b78 - Changed the MIDIStreamer to send the all notes off controller to each
channel when restarting the song, rather than emitting a single note off
  event which only has a 1 in 127 chance of being for a note that's playing
  on that channel. Then I decided it would probably be a good idea to reset
  all the controllers as well.
- Increasing the size of the internal Timidity stream buffer from 1/14 sec
  (copied from the OPL player) improved its sound dramatically, so apparently
  Timidity has issues with short stream buffers. It's now at 1/2 sec in
  length. However, there seems to be something weird going on with
  corazonazul_ff6boss.mid near the beginning where it stops and immediately
  restarts a guitar on the exact same note.
- Added a new sound debugging cvar: snd_drawoutput, which can show various
  oscilloscopes and spectrums.
- Internal TiMidity now plays music.
- Changed the progdir global variable into an FString.

SVN r900 (trunk)
2008-04-11 04:59:23 +00:00
Randy Heit
d1e27e533f - Applied a modified version of Karate Chris's screenshot naming patch.
- Sbarinfo optimization: Creating and destroying bar textures every frame is
  a relatively expensive operation. We can skip the custom texture entirely
  and just draw the bars directly to the screen, using the clipping parameters
  for DrawTexture(). This also means bars are no longer limited to the game
  palette, and the bar itself has the same resolution as the screen.


SVN r731 (trunk)
2008-02-05 05:29:31 +00:00
Christoph Oelckers
78164aab40 - Added support for AttackZOffset to P_RailAttack.
- Fixed: ParseDrawTextureTags read DTA_RenderStyle as ERenderStyle, not FRenderStyle.


SVN r726 (trunk)
2008-01-30 18:45:15 +00:00
Randy Heit
e5572a1c4e - Updated lempar.c to v1.31.
- Added .txt files to the list of types (wad, zip, and pk3) that can be
  loaded without listing them after -file.
- Fonts that are created by the ACS setfont command to wrap a texture now
  support animated textures.
- FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn
  with the hardware 2D path instead of being restricted to the game palette.
- Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1
  on a Radeon 9000.
- Added back the off-by-one palette handling, but in a much more limited
  scope than before. The skipped entry is assumed to always be at 248, and
  it is assumed that all Shader Model 1.4 cards suffer from this. That's
  because all SM1.4 cards are based on variants of the ATI R200 core, and the
  RV250 in a Radeon 9000 craps up like this. I see no reason to assume that
  other flavors of the R200 are any different. (Interesting note: With the
  Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the
  debug Direct3D 9 runtime, but it works perfectly fine with the retail
  Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its
  math inside pixel shaders. That would explain perfectly why I can't use
  constants greater than 1 with PS1.4 and why it can't do an exact mapping to
  every entry in the color palette.
- Fixed: The software shaded drawer did not work for 2D, because its selected
  "color"map was replaced with the identitymap before being used.
- Fixed: I cannot use Printf to output messages before the framebuffer was
  completely setup, meaning that Shader Model 1.4 cards could not change
  resolution.
- I have decided to let remap palettes specify variable alpha values for
  their colors. D3DFB no longer forces them to 255.
- Updated re2c to version 0.12.3.
- Fixed: A_Wander used threshold as a timer, when it should have used
  reactiontime.
- Fixed: A_CustomRailgun would not fire at all for actors without a target
  when the aim parameter was disabled.
- Made the warp command work in multiplayer, again courtesy of Karate Chris.
- Fixed: Trying to spawn a bot while not in a game made for a crashing time.
  (Patch courtesy of Karate Chris.)
- Removed some floating point math from hu_scores.cpp that somebody's GCC
  gave warnings for (not mine, though).
- Fixed: The SBarInfo drawbar command crashed if the sprite image was
  unavailable.
- Fixed: FString::operator=(const char *) did not release its old buffer when
  being assigned to the null string.
- The scanner no longer has an upper limit on the length of strings it
  accepts, though short strings will be faster than long ones.
- Moved all the text scanning functions into a class. Mainly, this means that
  multiple script scanner states can be stored without being forced to do so
  recursively. I think I might be taking advantage of that in the near
  future. Possibly. Maybe.
- Removed some potential buffer overflows from the decal parser.
- Applied Blzut3's SBARINFO update #9:
  * Fixed: When using even length values in drawnumber it would cap to a 98
    value instead of a 99 as intended.
  * The SBarInfo parser can now accept negatives for coordinates. This
    doesn't allow much right now, but later I plan to add better fullscreen
    hud support in which the negatives will be more useful. This also cleans
    up the source a bit since all calls for (x, y) coordinates are with the
    function getCoordinates().
- Added support for stencilling actors.
- Added support for non-black colors specified with DTA_ColorOverlay to the
  software renderer.
- Fixed: The inverse, gold, red, and green fixed colormaps each allocated
  space for 32 different colormaps, even though each only used the first one.
- Added two new blending flags to make reverse subtract blending more useful:
  STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that
  gets blended with the background, since that seems like a good idea for
  reverse subtraction. They also work with the other two blending operations.
- Added subtract and reverse subtract blending operations to the renderer.
  Since the ERenderStyle enumeration was getting rather unwieldy, I converted
  it into a new FRenderStyle structure that lets each parameter of the
  blending equation be set separately. This simplified the set up for the
  blend quite a bit, and it means a number of new combinations are available
  by setting the parameters properly.


SVN r710 (trunk)
2008-01-25 23:57:44 +00:00
Randy Heit
0b4092e98e - Merged the separate line and quad vertex buffers in D3DFB back into a single
vertex buffer, made line batching automatic, and added an index buffer for
  use when batching quads. The index buffer actually offered more of a
  performance boost than simply batching the quads alone did.


SVN r685 (trunk)
2008-01-09 21:04:21 +00:00
Randy Heit
016ac67376 - Fixed: Thing_SetTranslation still used a 16-bit word to hold the translation.
- Bumped the maximum resolution up to 2560x1600.
- Fixed: DCanvas::DrawTexture() only expanded virtual screen sizes for widescreen
  resolutions but left 5:4 modes alone. This fix neccessitated the addition of
  DTA_Bottom320x200 for the status bar to use so that it could be flush with the
  bottom of the screen rather than sitting slightly above it.
- Fixed: FConfigFile::ReadConfig()'s definition of whitespace was too broad.
- Fixed: Defining custom translation ranges in descending order and/or with gaps
  made for crashes.


SVN r676 (trunk)
2008-01-08 01:08:27 +00:00
Randy Heit
5cbb2bd472 - Moved the pixel shaders' color information out of the constant registers
and into the vertex data.
- Added functions for doing line drawing with Direct3D, including a new pair
  of functions to do batched line drawing so that the map can actually be
  drawn faster in hardware than in software (instead of an order of magnitude
  slower).


SVN r663 (trunk)
2008-01-04 05:22:30 +00:00
Randy Heit
5d9d2a9088 - Tried adding bilinear filtering support for paletted textures, but the
shader seems to be producing crappy output, so it's disabled for now.
  Specifically, it produces distorted output at regular intervals for
  textures that aren't power-of-2-sized, and it's still doing visible
  filtering when the texture is rendered at its original size, so
  obviously it's not doing something right.
- Fixed the use of power-of-2-sized native textures for smaller game
  textures again.
- Fixed: D3DFB did not restore all the state it needed to after resetting
  the device.
- Fixed: R_DrawTopBorder() must clip itself around the 3D view, since it's
  now drawn later.
- With full software rendering, palette flashes once again effect the whole
  screen.

Changes I neglected to put in the previous commit log:

- Moved the view border drawing into the 2D mode part. When using Begin2D()
  now, the only part of the software buffer that gets updated to the screen
  is the part with the actual 3D scene and only if you tell it to.
- Fixed a D3D memory leak on every frame in windowed mode and the same thing
  for the screen wipes. Note to self: If it's an interface, be sure to
  Release it, because it will be AddRef'ed before being returned to you.
- Moved the BlendView() call out of FBaseStatusBar::Draw() so that it can be
  applied before copying the 3D scene to the screen underneath the 2D parts.
- Restored the console's darkening level to its old table-based amount.
- Fixed D3DFB::SetColorOverlay()'s incorrect calculations.
- Fixed the D3D screen wipes for letterboxed modes.

SVN r662 (trunk)
2008-01-03 05:39:36 +00:00
Randy Heit
834e4bef32 - Changed the way gamma works for D3DFB: In windowed mode, the display is
drawn to a texture, then that texture is copied to the real back buffer
  using a gamma-correcting pixel shader. In fullscreen mode, SetGammaRamp
  is used.
- Fixed flashing of vid_fps display when fps > 1000.
- Fixed loading of RGB textures for native 2D mode.
- Changed the first rotozoomer's data because it just became too obvious when
  the backdrop is drawn with a full 256 distinct colors available.
- Set the player backdrop to update no more frequently than 35 FPS, so opening
  the player setup menu before starting a game won't produce a very fast
  moving backdrop.
- Changed the player backdrop into a texture so that it can be drawn like
  anything else.


SVN r648 (trunk)
2007-12-27 04:30:12 +00:00
Christoph Oelckers
0535d15df3 - Split off the entire translation code from r_draw.cpp into r_translate.cpp.
- Moved the common code of ACS and DECORATE translation generation into the
  FRemapTable class.
- Fixed: The DECORATE translation code was not changed for the new data structures.
- Expanded range of ACS and DECORATE translations to 65535. 
- Fixed: R_CopyTranslation was not altered for the new functionality.
  I removed the function and replaced the one use with a simple assignment.


SVN r644 (trunk)
2007-12-26 16:06:03 +00:00
Randy Heit
1acc3d00c4 - Discovered that Shader Model 1.4 clamps my constants, so I can't use
palettes smaller than 256 entries with the shader I wrote for it. Is there
  a list of gotchas like this listed some where? I'd really like to see it.
  
  Well, when compiled with SM2.0, the PalTex shader seems to be every-so-
  slightly faster on my GF7950GT than the SM1.4 version, so I guess it's a
  minor win for cards that support it.
- Fixed: ST_Endoom() failed to free the bitmap it used.
- Added the DTA_ColorOverlay attribute to blend a color with the texture
  being drawn. For software, this (currently) only works with black. For
  hardware, it works with any color. The motiviation for this was so I could
  rewrite the status bar calls that passed DIM_MAP to DTA_Translation to
  draw darker icons into something that didn't require making a whole new
  remap table.
- After having an "OMG! How could I have been so stupid?" moment, I have
  removed the off-by-one check from D3DFB. I had thought the off-by-one error
  was caused by rounding errors by the shader hardware. Not so. Rather, I
  wasn't sampling what I thought I was sampling. A texture that uses palette
  index 255 passes the value 1.0 to the shader. The shader needs to adjust the
  range of its palette indexes, or it will end up trying to read color 256
  from the palette texture when it should be reading color 255. Doh!
- The TranslationToTable() function has been added to map from translation
  numbers used by actors to the tables those numbers represent. This function
  performs validation for the input and returns NULL if the input value
  is invalid.
- Major changes to the way translation tables work: No longer are they each a
  256-byte array. Instead, the FRemapTable structure is used to represent each
  one. It includes a remap array for the software renderer, a palette array
  for a hardware renderer, and a native texture pointer for D3DFB. The
  translationtables array itself is now an array of TArrays that point to the
  real tables. The DTA_Translation attribute must also be passed a pointer
  to a FRemapTable, not a byte array as previously.
- Modified DFrameBuffer::DrawRateStuff() so that it can do its thing properly
  for D3DFB's 2D mode. Before, any fullscreen graphics (like help images)
  covered it up.


SVN r640 (trunk)
2007-12-26 04:42:15 +00:00
Christoph Oelckers
d12ede252f - also replaced the AM crosshair drawer by a DCanvas::DrawPixel function.
- moved the AM line drawer into DCanvas as a virtual function. While testing
  this code I discovered that the antialias precalculation was never used
  except for the very first frame of AM drawing. However, since I couldn't
  detect even a marginal performance improvement using this code on 2 computers
  I just disabled it completely because it severely complicates a more generic
  implementation. I also disabled am_ovtrans in the process because I couldn't
  see any positive effects of using this cvar. All it does is adding some 
  ugly distortion to the lines it affects without any apparent benefits.
* Added fix by Karate Chris containing:
- Added a 'No team changing' DMFlag2 which prevents players from changing teams 
  unless they are not on a team.
- Added a 'No respawn' DMFlag2 which prevents a player from respawning after 
  they have died.
- Added a 'Keep frags gained' DMFlag2 which allows you to choose whether you 
  want to reset the frags of each player next level or not.
- Added a small visual enhancement to the cooperative scoreboard to show 
  if a player has died.
- Fixed: If the 'teamplay' console variable was set to 'true' in a cooperative 
  game, the scoreboard would show team play related items as opposed to 
  cooperative items.
- Fixed: The 'bot_observer' console variable should not work in network games.
- Fixed: Bots made intermission skip really fast.


SVN r634 (trunk)
2007-12-24 14:24:24 +00:00
Christoph Oelckers
3c4344f2ec - minor fix in DrawPlayerBackdrop.
SVN r633 (trunk)
2007-12-23 22:22:21 +00:00
Christoph Oelckers
8a433d6f12 - Fixed a few font related problems.
- Fixed: ASkyViewpoint::Destroy was missing the super call.
- Added SnowKate709's A_LookEx update.
- Moved M_DrawPlayerBackdrop into DCanvas as a virtual function. Since this
  directly accesses the frame buffer it must be overridable for renderers
  that work differently.


SVN r632 (trunk)
2007-12-23 21:56:46 +00:00
Christoph Oelckers
eb2e40cde0 - Changed DTA_Translation parameter for DrawTexture to an integer to avoid
passing renderer specific data to the function. Also added DTA_Font so
  that the renderer can fetch font translations from the proper font.
  DIM_MAP/ConShade had to be made a regular translation table to make it
  work.
- Added Karate Chris's fix for scoreboard displaying team play related data
  in non teamplay games.
- Fixed: The team selection menu didn't work.
- Fixed: UpdateTeam passed an FString to Printf.


SVN r623 (trunk)
2007-12-23 14:13:29 +00:00
Randy Heit
dddc781f18 - Added versions of Dim and Clear to D3DFB for use in 2D mode.
- Added a new color parameter to DCanvas::Clear() that specifies the
  ARGB value of the color. This is used if the old color parameter,
  which specifies a palette entry, is -1.


SVN r617 (trunk)
2007-12-22 04:52:51 +00:00
Randy Heit
111853e623 - Added a framework for drawing the 2D screen elements with Direct3D textures.
They are not actually drawn with it yet, nor is it complete, but it's
  something to start with.
- Split up DCanvas::DrawTexture() into more pieces to make it easier to
  virtualize.
- Removed support for non-32-bit palette textures from D3DFB. What kind of
  card supports pixel shaders but not 32-bit textures?


SVN r605 (trunk)
2007-12-20 04:36:43 +00:00
Randy Heit
0b5e4b1f1f - Changed the vertheight and rounding-error-checking code in
DCanvas::DrawTexture() to calculate off the actual bottom of the image
  instead of the height, improving precision. Now the scaled status bar is
  flush with the bottom of the screen at 1280x1024, for instance.


SVN r458 (trunk)
2007-01-22 23:14:00 +00:00
Randy Heit
e1bd63e876 - Turned on warning level 4 just to see what it would produce: a lot of
warnings. At first, I was going to try and clean them all up. Then I decided
  that was a worthless cause and went about just acting on the ones that
  might actually be helpful:
   C4189 (local variable is initialized but not referenced)
   C4702 (unreachable code)
   C4512 (assignment operator could not be generated)


SVN r420 (trunk)
2006-12-21 04:34:43 +00:00
Randy Heit
ef1a5a115f - Added a new MapMarker actor. Instead of appearing in the 3D view, it appears
on the automap instead. If its first argument is zero, the map marker itself
  appears on the automap, otherwise it is drawn on top of any actor with a TID
  matching that argument. If the second argument is one, then the map marker
  will only be appear if the player has previously seen the sector it is one.
  You can use Thing_Activate and Thing_Deactivate on markers to turn them on
  and off. And if you subclass MapMarker with DECORATE, you can easily make
  your own custom markers.
- Fixed: Map markers could not be drawn partially off the map. They were
  drawn either fully or not at all.
- Fixed: Map markers appeared in the wrong place on a rotated overlay map if
  screenblocks < 10.


SVN r356 (trunk)
2006-10-20 04:04:04 +00:00
Randy Heit
c412b42703 - Fixed: cycle_t was still a DWORD and not a QWORD under GCC.
- The stat meters now return an FString instead of sprintfing into a fixed
  output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
  - For consistancy with the other integral types, byte is no longer a
    synonym for BYTE.
  - Most uses of BOOL have been change to the standard C++ bool type. Those
    that weren't were changed to INTBOOL to indicate they may contain values
    other than 0 or 1 but are still used as a boolean.
  - Compiler-provided types with explicit bit sizes are now used. In
    particular, DWORD is no longer a long so it will work with both 64-bit
    Windows and Linux.
  - Since some files need to include Windows headers, uint32 is a synonym
    for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
  was all it contained.


SVN r326 (trunk)
2006-09-14 00:02:31 +00:00
Christoph Oelckers
06630b0fee - Added support for scaled textures to DCanvas::DrawTexture.
- Changed deh.MaxHealth use to be consistent with other source ports.
- Added NULL pointer checks to APlayerPawn's state set functions. If these
  remove the player from the game a crash is the inevitable result.


SVN r325 (trunk)
2006-09-09 08:55:47 +00:00
Randy Heit
e2179d5c2d Guess what. It's not 2005 anymore.
SVN r184 (trunk)
2006-06-11 01:37:00 +00:00
Randy Heit
f50b284fda SVN r142 (trunk) 2006-05-24 15:31:21 +00:00
Christoph Oelckers
4a8ca6d134 Changed TAG_MORE parameter to a struct containing a va_list to ensure that no matter how va_list is defined the address can be taken.
SVN r119 (trunk)
2006-05-16 10:06:23 +00:00
Randy Heit
fd0c5a6db6 - Changed TAG_MORE to pass a va_list pointer instead of a va_list because it's a
non-POD type when targeting several non-ix86 targets with GCC. Hopefully this works.


SVN r80 (trunk)
2006-05-06 00:54:41 +00:00
Randy Heit
cf11cbdb30 Directory restructuring to make it easier to version projects that don't build zdoom.exe.
SVN r4 (trunk)
2006-02-24 04:48:15 +00:00