Christoph Oelckers
c5d75c18b4
- make gl_finishbeforeswap more useful by handling the case where it causes stalls on NVidia.
2016-12-25 22:56:18 +01:00
Christoph Oelckers
daf1a40521
- allow swapping the order of gl_finish and SwapBuffers calls, because some cards do not seem to like the correct order.
2016-12-03 20:09:25 +01:00
Christoph Oelckers
34970c9b9c
- removed hexenglobal include from GL files.
2016-12-03 18:49:52 +01:00
Christoph Oelckers
3a2d0e3486
- copied all necessary adjustments from the test branch in the QZDoom repo.
2016-11-15 11:49:27 +01:00
Rachael Alexanderson
d36993a03b
- Textured automap would crash due to an additional parameter in the software renderer to the FillSimplePoly function call, causing stack issues.
2016-11-08 15:05:23 -05:00
Christoph Oelckers
b75395aa74
- fixed: Screen size update coordinates were copied into the wrong buffer location.
2016-09-28 09:25:48 +02:00
Christoph Oelckers
750c194959
- changed order of SwapBuffers and glFinish call. The new order with glFinish coming last is recommended by OpenGL and it fixes a stalling problem with portals and camera textures visible at the same time.
...
- check and use WGL_EXT_swap_control_tear extension. The above change makes the system always wait for a full vsync with a wglSwapInterval of 1, so it now uses the official extension that enables adaptive vsync. Hopefully this also works on the cards where the old setup did not.
2016-09-26 01:38:25 +02:00
Christoph Oelckers
ee2766d00b
- made adjustments for new savegame code.
2016-09-24 01:47:44 +02:00
raa-eruanna
72491049e0
Changes to the contrast/brightness/gamma formula for both hardware and shader gamma correction. Mainly makes a correction with the shader version where contrast/brightness being negative values would clip them inappropriately.
2016-09-22 09:23:25 +02:00
Magnus Norddahl
3c1868f7e6
Fix wrong flash rectangle size after window resize
2016-09-16 02:53:19 +02:00
Christoph Oelckers
8b6e09ca09
- changed the license of the OpenGL renderer to LGPL v3.
...
This was done to clean up the license and to ensure that any commercial fork of the engine has to obey the far stricter requirements concerning source distribution. The old license was compatible with GPLv2 whereas combining GPLv2 and LGPLv3 force a license upgrade to GPLv3. The license of code that originates from ZDoomGL has not been changed.
2016-09-14 20:01:13 +02:00
alexey.lysiuk
dcabcaa5b6
Fixed compilation on non-Windows platforms
2016-09-13 22:10:07 +03:00
Magnus Norddahl
b378b3d05a
Remove black bars from windowed mode
2016-09-12 20:43:45 +02:00
Christoph Oelckers
3389a5a74e
- removed most of the specific options for legacy hardware and consolidated them in one variable (does not work yet.)
2016-09-01 11:52:52 +02:00
Christoph Oelckers
45ff15559d
- removed gl_draw_synv because with the postprocessing this is no longer useful.
2016-08-30 00:33:02 +02:00
Magnus Norddahl
b1a0108a96
Fix tonemap palette not being rebuilt on palette change
2016-08-26 19:52:15 +02:00
Magnus Norddahl
960038bb81
Clear global state tracking variables when the OpenGL context is (re)created
2016-08-26 01:36:21 +02:00
Christoph Oelckers
dde81b33ea
- glEnable(GL_TEXTURE_2D) only makes sense if no shaders are being used.
2016-08-21 08:45:21 +02:00
Magnus Norddahl
2cb5f1740e
Add OpenGL debug messages to the console
2016-08-17 20:33:10 +02:00
Magnus Norddahl
f8cc56ea3a
Move SetOutputViewport to OpenGLFrameBuffer::Update as it cannot be safely called from Begin2D
2016-08-14 09:05:54 +02:00
Magnus Norddahl
4ecb77385d
GetScreenshotBuffer bug fix
2016-08-14 09:05:49 +02:00
Magnus Norddahl
d5b122b092
Fix GetScreenshotBuffer grabbing from wrong location
2016-08-14 09:05:48 +02:00
Magnus Norddahl
c817979eae
Remove GetTrueHeight from GL renderer and concentrate all viewport calculations in SetOutputViewport
2016-08-14 09:05:48 +02:00
Christoph Oelckers
8daaf61160
- predefine the vertex data for the blend overlay which will never change throughout the lifetime of the GLRenderer object.
2016-08-08 14:24:48 +02:00
Magnus Norddahl
2ac91f0c5a
Fix Nvidia driver ignoring wglSwapIntervalEXT
2016-08-08 12:22:40 +02:00
Christoph Oelckers
def3ad7533
- refactored all 2D drawing to use its own vertex buffer which does not need to be mapped permanently.
2016-08-08 12:13:09 +02:00
Magnus Norddahl
aeb7df09de
Added hardware gamma option and improved window handling on Windows
2016-07-27 11:15:19 +02:00
Christoph Oelckers
52e19c59b3
Revert "- let gl_draw_sync default to false."
...
This reverts commit 616f84209b
.
Now I remember why this is not active: This is causing some problems with interpolated plane heights. Since there is no synchronization with the vertex buffer, the next frame will reset all plane coordinates before the GPU can use them. This will require some rethinking about when to update the buffer - it cannot be done in the render data setup loop.
2016-05-13 20:44:04 +02:00
Christoph Oelckers
616f84209b
- let gl_draw_sync default to false.
...
No need to waste valuable processing time if we can let the GPU run in parallel with the code that generates the next frame.
2016-05-12 20:23:18 +02:00
Christoph Oelckers
f2f3fa6d09
- parched the texture precaching so that it compiles and works again. The real work will come later.
2016-05-02 00:13:00 +02:00
alexey.lysiuk
6757447f1b
Enabled printing of OpenGL startup log on all platforms
2016-04-30 16:28:35 +03:00
alexey.lysiuk
bd8b8911d5
- fixed Windows 32-bit build
2016-04-11 10:08:18 +03:00
Christoph Oelckers
1f0fd85d0e
- adjustments for the DrawTexture interface changes.
2016-04-09 13:05:43 +02:00
Christoph Oelckers
b958a5d748
- adjustments in GL code.
2016-03-25 15:14:09 +01:00
Christoph Oelckers
48e21f6759
- consider MBF sky transfers when checking for skybox precaching.
2015-04-01 12:08:42 +02:00
Christoph Oelckers
1e9a6e667e
- GL code adjustments for reworked precaching.
2015-04-01 11:59:41 +02:00
Christoph Oelckers
32f08adaf3
- moved some code to better places.
...
- allow GL version 3.0 in Windows, too.
2014-09-14 23:01:57 +02:00
Ralgor
cfc8f3dbbf
Global GL render context shouldn't be initialized inside of gl_PrintStartupLog, since it's not compiled in non MSC builds.
2014-09-14 14:42:14 -05:00
Christoph Oelckers
e132fc5eed
- replaced GLEW with GLLoadGen for GL access. This allows to have a header that only contains what's actually required, namely OpenGL 3.3 plus glBegin and glEnd which are the only compatibility functions needed for the fallback render path.
...
GLEW has two major problems:
- it always includes everything, there is no way to restrict the header to a specific GL version
- it is mostly broken with a core profile and only works if all sanity checks get switched off.
2014-08-21 11:02:46 +02:00
Christoph Oelckers
38796e7714
- removed some obsolete and useless GL calls.
2014-08-17 11:41:03 +02:00
Christoph Oelckers
c9c93a58a2
- fixed bad constant and potential use of uninitialized variable.
2014-07-27 21:55:25 +02:00
Christoph Oelckers
fc0cf4f998
- GZDoom now runs on an OpenGL core profile. :)
...
It's probably still necessary to replace GLEW with another loader library. GLEW is pretty much broken on core OpenGL without some hacky workarounds...
2014-07-15 02:26:23 +02:00
Christoph Oelckers
ed8a21fd86
- replaced deprecated alpha testing with shader code.
2014-07-14 21:14:43 +02:00
Christoph Oelckers
ed5ee4e8d1
- removed some obsolete init stuff and some deprecated constants.
2014-07-14 18:48:46 +02:00
Christoph Oelckers
2214c0ac06
- remove all uses of builtin matrix manipulation. Only glLoadMatrix for view and projection matrix are left.
2014-07-13 22:37:34 +02:00
Christoph Oelckers
ffcb6cb70a
- added second vertex coordinate attribute for model interpolation.
2014-06-29 11:00:21 +02:00
Christoph Oelckers
09f4071436
Ok, it had to be done: Removed shader support for pre GLSL 1.3/GL 3.0 hardware. The compromises needed to accomodate these are just too bad and would block any attempt at streamlining the code.
2014-05-11 13:27:51 +02:00
Christoph Oelckers
69af73d9b9
- alternative configuration using GLEW to get extension functions. This requires GL 2.0, though so it won't be promoted to the mainline for the time being.
...
- removed all pre GL 2.0 support.
2014-04-06 14:35:44 +02:00
Mike Swanson
d48d337883
convert file from UTF-16LE to UTF-8
...
This one file gave issues with parsing in certain programs, including
the GitHub UI. No need for English text to waste so much space.
2013-12-05 04:43:29 -08:00
Christoph Oelckers
2885056f46
- moved GLEXT API out of RenderContext struct.
2013-09-03 18:29:39 +02:00