Updated skybox model to better match GZDoom's skybox. Also the sky texture was flipped horizontally.
Fixed, Visual mode: "Select with the same texture" action is now able to select sidedef parts only visible because of slopes.
Fixed, Visual mode: skybox texture was not updated after using "Open map in current wad" action.
Fixed, Visual mode: in some cases Visual camera was placed below sector's floor when "Sync camera position between 2D and 3D modes" setting was enabled.
Fixed: numeric thing flags with inverted UDMF flag defined in "thingflagstranslation" Game configuration block were lost when copy-pasting a thing.
Fixed, command line arguments: fixed a crash when loading a map from a wad with existing .dbs file.
Fixed, Visual mode: aspect ratio was not updated when render area was resized.
Fixed, Visual mode: vertex handles were disappearing after using Reload Resources (F8) action.
Changed, internal: removed most of the fixed pipeline rendering code. The editor can no longer be used on a video card without Shader Model 2.0 support.
Fixed, Visual mode: "Select with the same texture" action should not select invisible geometry (like sidedef parts hidden by slopes).
Changed, Sector drawing: default sector height is now used when the nearest sector's height is <= 0.
Fixed, Map Analysis mode: fixed a crash when trying to dissolve an invalid sector when one of it's linedefs referenced it on the both sides.
Fixed, Sectors mode: fixed incorrect undo description when deleting sectors.
Internal: joined declaration and assignment of some more variables.
Visual mode: fog distance calculation is now much closer to GZDoom one.
Visual mode: thing brightness calculation when a thing is affected by floor glow is now much closer to GZDoom one.
Linedef edit window, UDMF: added "Reset front/back brightness" buttons.
Sector edit window, UDMF: added "Reset ceiling/floor brightness" buttons.
Internal, Visual mode, Things mode: persistent event lines are now updated only when map objects are changed instead of doing it on every display redraw.
Internal: improved Dictionary lookup times when using map objects and textures as keys.
Internal: added "Release + Profiler" solution configuration.
Updated ZDoom_ACS.cfg (Warp).
Fixed, Classic modes: MODELDEF model scale was not taken into account when calculating model visibility, which resulted in models with increased scaled disappearing when near screen edges.
Visual mode: when "Synch camera position" setting is enabled, and the cursor was outside of a sector when entering Visual mode, camera height is now adjusted based on nearest sector (previously the height was adjusted only when the cursor was inside of a sector).
"Auto-align textures X", "Auto-align textures X and Y" actions, UDMF: alignment source sidedef part's horizontal scale is now applied to all aligned sidedefs.
Visual mode, UDMF: 'lightfog' flag is now automatically updated when changing sidedef brightness or using "Match Brightness" action.
Linedefs mode: added "Update 'lightfog' flag" menu item.
Game configurations: cosmetic changes in UDMF linedef flag names.
Updated ZDoom_DECORATE.cfg.
Fixed, Texture Browser Form: well, I broke "Tab" key functionality again (in previous commit)...
Maintenance: changed curly braces style to match DB2 one (hopefully not breaking anything in the process...).
Maintenance: changed private method names casing to match DB2 one.
Fixed: Randomize Sectors, UDMF: vertex height changes were not undone properly after using the mode (I broke it in r2101).
Fixed: Randomize Sectors: floor/ceiling textures can not be used as lower/upper textures when "MixTexturesAndFlats" is disabled. In this case the corresponding option is now changed to "Use default texture".
Internal: UDMF sector slopes and offsets are no longer stored in sector.Fields. Use sector.FloorSlope, sector.FloorSlopeOffset, sector.CeilingSlope and sector.CeilingSlopeOffset.
Error checks: added "Check unused textures" option.
Replaced MissingTexture3D and UnknownTexture3D.
Sectors mode: restored "Lower/Raise Floor/Ceiling by 8 mp" actions.
Visual mode: in some cases sidedefs were rendered as selected when they were not.
Existing linedefs were not split while drawing new lines in some cases.
Texture and height overrides were not applied correctly in some cases.
Preferences form: "Ctrl+Alt+ScrollUp" and "Ctrl+Alt+ScrollDown" dropdown items were setting the shortcut to "Ctrl+Shift+ScrollUp" and "Ctrl+Shift+ScrollDown".
Increased maximum zoom level in Classic modes to 3000%.
Added "1 mp" option in grid size menu.
Added "400%" option in zoom menu.
Renamed "Toggle GZDoom rendering effects" action to "Toggle Geometry Effects".
Sync camera position: Visual Camera height is now changed only if camera is above or below current sector.
Classic modes: view was not redrawn after "Test map from current position" action.
"Test map from current position" action: incorrect player start was used when a map had several Player 1 Start things.
Visual mode: rendering was broken on video cards without Shader Model 2.0 support.
Engines list was not updated after changing engine in Test button's drop down.
Visual mode: Info/Warning/Error status messages were not displayed properly when nothing was selected.
Sector Edit form, UDMF: Reset and Link buttons were overlapped in Floor/Ceiling scale controls.
Texture scale controls now have "Link" button.
Thing, Sector (UDMF) and Linedef edit forms now work in realtime mode.
Some more fixes in Edit form realtime update stuff.
Removed some unused variables and functions.
Visual mode: fixed a crash after disabling GZDoom rendering effects (Tab key) when visual sector was not created for sector with 3d floor's control linedef.
Floor and ceiling textures are now moved more predictably by arrow keys in GZDoom Visual mode.
Walls texture coordinates are always rounded when moved by arrow keys in Visual modes.
Linedef info panel: relative UDMF light values are now shown like this: 16 (128), which means "UDMF light value" ("total surface brightness (UDMF light value + sector brightness)")
Player is now spawned at camera height when testing from current location in Visual modes.
Focus is now properly restored after testing from current location in Visual modes.
Updated Heretic_sectors.cfg and Heretic_things.cfg as described here: http://www.doombuilder.com/forums/viewtopic.php?f=11&t=357
Changed sprites of artifacts in Hexen_things.cfg to proper ones.
Renamed Skulltag configs to Zandronum
Fixed: inability to change 3d-floor height when control sector is too far away (further than current View distance).
Fixed: "Frame" property wasn't red by MODELDEF parser.
Fixed: PK3 archives are no longer locked when GZDB is running, so you can change their contents without closing the editor.
TEXTURES patches can now be loaded from anywhere inside resource.
Configs: things from "Cameras and Interpolation" and "Boom Items" categories weren't rendered in Visual modes.
Configs: several new icons are now used for things.
Reverted sectors rendering from 1.12b, because it was done in too hackish way and was causing more and more problems. Models rendered height is now 25% lower instead.
Models rendering height can be toggled between normal and 85% in Preferences->Appearance->"Scale models in Visual modes"
Fixed several small bugs here and there.
Things can now be rotated in visual mode.
Added JPG and TGA image format support.
Fixed: TEXTURES files with names other than "textures.ext" will now be loaded (as an example, files named like "textures.something.txt" or "textures_walls.ccp" will be loaded by (G)ZDoom, but not by Doom Builder 2 or previous versions of GZDB).
Fixed: textures defined in TEXTURES have higher priority in (G)ZDoom than images with the same name in "textures" folder.
Fixed another possible crash when MODELDEF is reloaded.
Things can now be cut, copied and pasted in Visual modes.
Sector geometry was not updated properly after Undo/Redo in GZDoom Visual mode.
Fixed an error when user selects multiple things and attempts to view their properties in Doom map format.
Added Decorate and Modeldef syntax hilighting, autocompletion and item recognition to Script editor.
Script Editor can now autodetect several script types when you open them (currently ACS, Decorate and Modeldef scripts are recognized).
Tag Explorer: fixed a bug when Tag Explorer update can block keyboard keys release detection logic.
Replaced all doubles with floats.
Script Editor:
Navigator drop-down now updates automatically.
Navigator drop-down now also works for external files.
Added Navigator drop-down support for Decorate and Modeldef.
Added drawing modes to Mode menu, so they are much easier to spot now.
Warnings notify panel blinks much more noticeable when there are warnings.
UDMF Controls plugin:
3D-floor surfaces can be edited now.
Relative mode is now enabled by default.
Scale control now works properly in relative mode.
Angle control's angle indicator in now drawn properly when value is changed using numeric control.
Added "Test Map from current position" action (default shortcut is Ctrl-F9), which lets you play the game from cursor position, if you are in 2D-Mode, and from camera location if you are in Visual Mode.
Added "Sync camera position between 2D and 3D modes" (found in Preferences -> Interface -> Options), which automatically centers 2D-mode on camera position when you leave Visual Mode, and places camera at cursor position when you toggle from 2D-mode to Visual Mode (unless you have Visual Mode camera thing in your map).
Several improvements in Draw Rectangle and Draw Ellipse modes: added info label with current bevel amount and subdivision level; bevel amount now applied properly when shape size is smaller than it.
MODELDEFs and models can now be loaded from PK3 resources (does anybody know if models or MODELDEFs can be stored in WADs?).
Negative scale and zOffset are now correctly parsed from MODELDEFs (model surfaces may be inverted though).
Fixed a crash while reading MODELDEFs when Operation System's decimal separator was set to comma.
Fixed a crash when user changed Thing type in Visual mode to a new one with model override, which wasn't previously used in a map.
Fixed a bug introduced in 1.06 when models weren't rendered in Visual mode when Fullbright mode was on.
Non-breaking space is now correctly handled by all Doom Builder's data parsers.
ColorPicker plugin:
Fixed a crash when user attempted to open ColorPicker window to edit sector properties in Visual mode, using hilighted surface as selection source, without selecting anything before doing so.
Fog rendering (including colored fog in maps in UDMF format).
Fixed lots of bugs in model loading and rendering.
Added "Toggle GZDoom Effects" button, which currently toggles dynamic lights, models and fog rendering.
Model loading process is more verbose now, so if something goes wrong, check Errors and Warnings window (F11) for details.
ColorPicker plugin:
You can now select surfaces in 3D-mode and then open Color Picker window to edit sector colors of sectors, to which these surfaces belong.
If nothing is selected, you can hilight a surface and then open Color Picker window to edit sector colors of sector, to which hilighted surface belongs.
If nothing is selected, you can hilight a Light Thing and then open Color Picker window to edit it's properties.
Added Color Picker plugin
Point, Flicker and Pulse light animation should now look almost exactly as seen in GZDoom.
Fixed a bug when editing thing properties in Visual mode didn't update visual thing.
Fixed incorrect doom-style walls shading when sector has "lightcolor" property set.
Fixed "Index was outside the bounds of the array in CalculateNormalsAndShading()" error.
GZDoomBuilder will now show error message prior to failing.
