Wall collision fixes
Fixes included in this branch:
* A fix for a specific crash encountered in a SUGOI map (sound familiar?) caused by bouncing off a wall adjacent to a slope
* A fix for solid midtextures not accounting for Effect 3/Peg Midtexture properly (https://mb.srb2.org/showthread.php?t=41462)
* A fix for solid midtextures not accounting for texture y offsets properly for non-Lower Unpegged/Peg Midtextured midtextures
* A fix for solid midtextures not accounting for "infinite" repeats (Repeat Midtexture + no repeat count set)
* ~~A fix for Effect 4 on Polyobject First Line making that particular linedef's midtexture solid in addition to making planes visible - this is not wanted if you want a polyobject with both visible planes and full intangibility.~~ Apparently they never did this anyway, don't mind me \o/
See merge request !104
* MF_AMBUSH is now MF2_AMBUSH, because it's something you turn on in a map editor, not with a SOC definition.
* Where MF_AMBUSH was is now MF_PAPER.
* MF_PAPER accesses all the stuff I did previously in this branch...
* ...as well as turn on paper-thin collision detection between mobjs, which I've gotten working but isn't perfect but it's still good enough for non-solid objects!!
I DID make some steps towards re-implementing PIT_CheckThing for solids only in order to replace the hack long-term and hopefully use less CPU, but is currently disabled via #if 0 since I'm not comfortable changing the function signature of P_CheckPosition right now.
. tmthing can be NULL if called from PTR_SlideTraverse, so we should use slidemo instead
This fixes a crash that occurs in yet ANOTHER SUGOI map, involving bouncy walls next to sloped floors/ceilings
* When moving slowly, P_InstaThrust at S_SKIN's maxdash forward, and set momz to S_SKIN's mindash upwards. Plays a tok noise (not thok). Hurts enemies/bosses, busts spikes/monitors/all types of bustable blocks.
* When moving quickly... doesn't do anything yet, but WILL do a slide.
Also, P_DoSpinDash is now renamed to P_DoSpinAbility, and CA_TWINSPIN users can bust all bustable blocks on collision too.
* SF_NOJUMPSPIN - Player's height is full whilst jumping, SPR2_JUMP defaults to SPR2_SPNG instead of SPR2_SPIN, and the player goes into fall frames if they start moving downwards or use their ability.
* PA_JUMP - for jumping (upwards in the case of SF_NOJUMPSPIN.
* SF_NOJUMPDAMAGE - Ala rosy.wad, don't damage enemies, etc when jumping into them.
* SF_STOMPDAMAGE - Just for fun. Ala in Mario, always damage enemies when you land on top of them (your gravity reference, not theirs).
* SF_MARIODAMAGE - SF_NOJUMPDAMAGE|SF_STOMPDAMAGE is reasonably accurate to the Mario games, and might as well be surfaced as such.
Also, a minor change:
* Instead of not spawning the revitem if your SPR2_ is SPR2_DASH, don't spawn it if it's set to 0. This requires the player.dta I uploaded a couple days ago to behave as it was previously.
* Don't get stuck in spindash frames if your maxdash is 0, and don't flash rolling frames if you're on goop.
- Press spin in midair to stomp directly downwards (losing horizontal momentum), creating a flickering fireball around you.
- No bouncing on enemies, item boxes, etc - just go straight through.
- Hurts other players on touch whilst you're stomping.
- Spawns a bunch of flames around you when you hit the ground.
Also:
- Electric shield's ability now uses different sounds, because I'm picky.
- Now checks whether the player's top is below the bottom of the fan/gas jet, instead of its bottom. zdist calculation not affected.
- mo->standingslope is NULL'd so the player isn't launched off at a wacky angle. (I also did this for springs, since Prime mentioned it was a problem for them too.)
The whole thing needs a refactor in general, but it's almost 2am here, I need my sleeb, and this fix would probably break something with 2.1 climbing if I made it any more/less (depending on viewpoint) complicated.
Fix for teetering on PolyObjects
So... somebody goofed and didn't realise PolyObject sectors could be added to the sector node list for each object (which is referenced by mobj->touching_sectorlist), via their linedefs if they are nearby the player (yes, PolyObject linedefs are special and get to move about the level). As it turns out, this allows even INTANGIBLE PolyObjects to make you teeter in a seemingly inexplicable way.
What is happening is that PolyObject sectors, when they are added to the mentioned lists, are then checked under normal sector teetering conditions - if the player is above the floorheight by 24 FUs, you're officially teetering unless stated otherwise. The actual PolyObject teetering code can't help you here if the conditions are right, especially if they're taller than 24 FU in height.
There are a number of things wrong with the teetering code in general that I'd like to sort eventually, but at least now teetering on PolyObjects is fixed at last ...right? Please check the branch out if you can to check this, obviously.
See merge request !54
* SPR2_JUMP and SPR2_SJMP are now the jump sprite sets for spin chars
* SPR2_SPNG and SPR2_SSPG are the new sprite sets for spring up anims (instead of JUMP/SJMP)
* S_PLAY_JUMP and S_PLAY_SUPER_JUMP are now the states for spin char jumps
* S_PLAY_SPRING and S_PLAY_SUPER_SPRING are the new states for spring up (instead of the "JUMP" states)
* PA_JUMP is now PA_SPRING (jumping anims are lumped with PA_ROLL)
Compiling errors fixed in this commit:
* Various cases of mixed declaration and statement code
* Implicit declaration of slope functions (read: you forgot to put "include "p_slopes.h" in MORE than a few places)
* an odd case of a bad fixed_t to float typecase, cause by using P_GetZAt directly inside FIXED_TO_FLOAT
* a few minor cases of bad unsigned-signed comparisons
* no prototypes for some of the new slope functions. For goodness sake Red, this is basic stuff!
It's a lot nicer in general, honestly. I think a couple bugs with custom monitors respawning got fixed in the process.
Note that a monitorgfx.wad is needed if you want to see things besides <!>s for monitors, due to graphic changes.
Compiling errors fixed in this commit:
* Various cases of mixed declaration and statement code
* Implicit declaration of slope functions (read: you forgot to put "include "p_slopes.h" in MORE than a few places)
* an odd case of a bad fixed_t to float typecase, cause by using P_GetZAt directly inside FIXED_TO_FLOAT
* a few minor cases of bad unsigned-signed comparisons
* no prototypes for some of the new slope functions. For goodness sake Red, this is basic stuff!
New player animations (Updated player.dta Sonic)
Adds support for several completely new player animations, mostly for Super Sonic.
See merge request !5
Goo Water (THZ Goop) adjustements
At Nev3r's request:
Adjusted goop so that you spend less time bouncing around in it. The goop will become a walkable surface with a higher velocity threshold.
The actual goop physics haven't been altered as far as the initial entrance and underwater time is concerned, only leaving goop and subsequent bounces has been dampened significantly.
See merge request !7
Re-add/fix broken platform momz mobj code.
The changes in this branch re-add the platform's momentum to players and mobjs which leave the platform (eg. by jumping) so that they move with relative velocity as expected. This behavior was unintentionally broken in SRB2 2.0, which adds a lot of artificial difficulty to certain segments of the levels, where you have to jump between high velocity moving platforms which seemingly cut your jump height to nothing.
Not only has the behavior been fixed, but it has now been enhanced to move the camera while free-falling between platforms as well, completing the illusion of full relative velocity with minimal hiccups. [Observe.](http://i.imgur.com/zmSfUyp.gifv)
See merge request !14
This fixes the issue with upside-down springs shooting downwards if you touch another of its kind. Also fixes one of the issues with monitors in Icicle Falls (after you phase inside the East-most float-bob FOF's monitor via the other bug and jump up to break it while there, the NEXT monitor moves upwards too)
Here's how it works: When a player walks off the
moving platform, it applies their pmomz once, and
then _keeps pmomz set_ so that the camera still
adds pmomz to its movements until they hit another
floor. This way, the camera doesn't jerk around.
Now players will apply platform movement when jumping,
but only if the platform is moving the same direction
as their jump is, and all other objects will have an
appropriate pmomz in reverse gravity FOF situations.
Now it will only bounce ONCE when you jump on it, and Knuckles
just barely gets enough velocity out of his jump for even that.
This will leave players vulnerable and annoyed for a lot less
time while they wait to finish bouncing.
...
(It's that infamous intangible West/South linedefs bug, which was really a blockmap-related bug all along. AND IT WAS SO SIMPLE TO FIX!)
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@9048 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
...
(It's that infamous intangible West/South linedefs bug, which was really a blockmap-related bug all along. AND IT WAS SO SIMPLE TO FIX!)
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@9048 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
Currently the main benefit of these changes is that a number of non-Object-related hazards/deaths no long rely on dummy MT_NULL objects or other hacks to tell the game how you were hurt/killed, yay
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@9039 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
SPR_PLAY now calls up a secondary spritedef for all animations for all players. Old character wads (including player.dta) are no longer compatible.
git-svn-id: https://code.orospakr.ca/svn/srb2/trunk@8993 6de4a73c-47e2-0310-b8c1-93d6ecd3f8cd
