Bill Currie
447ff2f2f5
Clean up global symbols for the gl renderer.
...
Where possible, symbols have been made static, prefixed with gl_/GL_ or
moved into the code shared by all renderers. This will make doing plugins
easier but done now for link testing.
2012-02-18 11:48:52 +09:00
Bill Currie
a131a7ab9d
Fix the gl test... again :/
...
Actually, it probably doesn't make any difference, but making it look
right is still important.
2012-02-01 13:01:24 +09:00
Bill Currie
1437cbec91
Make the face culling a little more sensible.
...
GL Quake was weird, culling front faces. Partly understandable, since
Quake's front order is clockwise and GL's default order is
counter-clockwise. However, since the order can be specified, that should
be done instead. Thus, specify the winding order as clockwise (for quake's
data), set culling for back-face removal, and then mess with the winding
direction in the mirror and fish-eye code.
2012-01-03 18:06:26 +09:00
Bill Currie
5cd1f6f5cf
Fix a GL version check snafu.
...
Thanks to MH (on inside3d.com) for pointing this out to me.
2011-12-16 09:43:22 +09:00
Bill Currie
f6ebb78140
More GL_Init_Common() cleanup.
...
Move the call to GL_Common_Init_Cvars() out of the block of check calls.
2011-12-15 17:09:01 +09:00
Bill Currie
51aaee5c3b
Put that OpenGL error message to rest.
...
The error was quite valid: setting GL_TEXTURE_MAX_ANISOTROPY_EXT to 0 is
incorrect. The problem was caused by the call to glTexParameterf being
before the gl_anisotropy cvar was initialized. Thus, move all of the setup
code in GL_Init_Common() to after all the checks and, more importantly,
after the call to GL_Common_Init_Cvars().
2011-12-15 17:09:01 +09:00
Bill Currie
23d3407622
Change a few defaults as suggested by bigfoot.
...
in_dga -> 0 (until X is fixed)
gl_multitexture -> 1 (why was this 0? not enough support back then?)
cl_usleep -> 1 (seems to be ok)
host_mem_size -> 40 (even 32 isn't enough these days)
rate -> 10000 (we're not in the modem era any more)
cl_mem_size -> 32 (16 is not enough, 32 sounds better than 24)
2010-12-16 11:34:39 +09:00
Bill Currie
f31595781c
Add and used SYS_VID for video/targets masked prints.
2010-11-27 08:48:00 +09:00
Bill Currie
8c4fe2f844
Rename Sys_DPrintf to Sys_MaskPrintf.
...
We now have finer runtime control over what gets printed. Need to do a
SYS_DEV audit, creating new masks as apropriate.
2010-11-26 16:19:26 +09:00
Bill Currie
4b0320f341
glx, gly, glwidth and glheight are now gone too. also GL_BeginRendering
2009-12-23 08:20:29 +00:00
Bill Currie
f2004abecc
nuke scr_width and scr_height
2009-12-23 07:00:42 +00:00
Bill Currie
6d6dc27592
make startup and shutdown a little quieter
2007-11-06 10:39:49 +00:00
Bill Currie
d66934942d
nuke Con_Printf and Con_DPrintf and use Sys_* instead
2007-11-06 10:17:14 +00:00
Bill Currie
99c0954b47
the big dso visibility patch :). Sure, we have to have unique names for static builds, but with controlled visibitly we should get faster program loads (although this isn't C++, so it's not as bad) and complex plugins are cleaner.
2007-03-10 12:00:59 +00:00
Bill Currie
87cc09233c
"long" audit. can't use long when we want 32 bits. May be a few more cases.
2005-10-23 13:19:21 +00:00
Bill Currie
3fb03fc2be
hah, should have been using __attribute__((used)) all that time (rather
...
than __attribute__((unused))). fixes the missing console in -x11
2005-08-04 15:27:09 +00:00
Bill Currie
501180aaac
gcc-4.0 fixes. even found some bugs :) (names /not/ mangled this time)
2005-06-08 06:35:48 +00:00
Bill Currie
23f71485d1
more tree recovering. This includes Despair's anisotropy support work.
2005-01-02 14:23:20 +00:00
Bill Currie
cefc6df98c
grievre's patch to trade (minor) frame rate for frame (non-)latency
2004-07-10 02:32:30 +00:00
Bill Currie
fc4211c257
the rest of Grievre's lighting tweaks
2004-05-02 21:21:00 +00:00
Bill Currie
1c0735d0c9
* taniwha mutters about end-runs (sorry, Grievre)
2004-04-28 04:07:50 +00:00
Bill Currie
785307fd9a
Grievre's lighting tweeks
2004-04-27 22:18:23 +00:00
Ragnvald Maartmann-Moe IV
29502c8f5a
Lots of optimizations, particularly for GL state changes, and tweak lighting a
...
bit more.
Also a cleanup from Grievre: Use VectorIsZero in two places in gl_mod_alias.c.
2004-03-15 21:32:19 +00:00
Ragnvald Maartmann-Moe IV
1fe06c326b
More of my experimental GL lighting tweaks.
2004-03-11 01:03:51 +00:00
Ragnvald Maartmann-Moe IV
9cd16b8dfd
Grievre's lighting patch, plus some of my own changes.
...
My changes:
Emit normals if truform is enabled.
Attempt to avoid 0,0,0 normals (makes lighting & tesselation unhappy).
Fix some (ancient) apparent bugs in GetAliasFrameVerts16().
Clamp minlight, instead of adding it.
Apply colormod as glColor, rather than adding it to emission, to prevent QSG2
issues with fullbrights.
Rearrange init code, and don't go quite as wild with responsiveness to lights.
Material & lightmode settings will need tweaking & testing to work well on all
cards. Feedback needed there.
2004-03-10 08:14:38 +00:00
Ragnvald Maartmann-Moe IV
b7df0b5278
Remove gl_doublebright, remove fractional overbrights, clean up init a bit,
...
uglify init a bit. Stuff for taniwha to look at. Nothing to see here, move
along.
2004-03-07 23:51:29 +00:00
Ragnvald Maartmann-Moe IV
58d67f9a75
Lighting init fixes.
2004-02-29 04:50:01 +00:00
Ragnvald Maartmann-Moe IV
fde6e5bf61
Reduce ifs a bit, clean up init a bit. Minor problem with gl_doublebright. LIH.
2004-02-29 01:49:41 +00:00
Ragnvald Maartmann-Moe IV
28fda91e8c
If (!var) checking for a cvar setup. Can't believe that one slipped by for so
...
long... Also set a few globals static.
2004-02-27 20:40:26 +00:00
Ragnvald Maartmann-Moe IV
44c89c1904
Optimize fullbright testing for brushes, assorted other cleanups, test for
...
functions built into current GL drivers, as well as the old extensions, and
add incorrectly rendering BGRA support.
Whee!
2004-02-24 20:50:55 +00:00
Ragnvald Maartmann-Moe IV
872498a1f0
Reorder a lot of code, removing tons of ifs. multitexture paths are a bit more
...
sane now. Also optimize QSG2 color handling, and fix some QSG2 bugs. Not that
anyone cares, nobody uses it anyways.
Should be faster, but isn't here. *grmbl*
2004-02-22 06:00:15 +00:00
Chris Ison
ca6112767c
Grievres' water HOM and mtex FB only rendering FB texture fix
2004-02-21 09:04:52 +00:00
Ragnvald Maartmann-Moe IV
5157f668ad
Fix a bunch of state leaks that made multitextured fullbrights smear the world.
...
Now just have one (known) issue with bmodels with fullbright textures not
rendering their base texture. Floating fullbrights are nifty!
Also a number of optimizations, which need wider performance testing.
2004-02-21 05:36:19 +00:00
Ragnvald Maartmann-Moe IV
fef9b30bd7
QF, now complete with underbrights, thanks to Grievre.
...
Play with gl_overbright and gl_doublebright. That's an order.
2004-02-15 00:02:04 +00:00
Bill Currie
85a268c62f
Grievre's lightmap/fullbright multitexture patch (fbs not tested due to
...
lack of drivers supporting 3 tmus)
2004-02-14 05:10:29 +00:00
Ragnvald Maartmann-Moe IV
654cc35482
Mysteriously uncommitted. Fixed.
2004-02-09 04:02:08 +00:00
Bill Currie
a45981bc6a
don't look up the gl functions until after the context has been setup, just
...
incase it affects which functions glGetProcAddress actually returns.
2004-02-06 00:58:35 +00:00
Ragnvald Maartmann-Moe IV
0e6681a069
Add QFGL_WANT, and ability to handle non-required extensions.
2004-01-28 02:49:57 +00:00
Ragnvald Maartmann-Moe IV
31aca31d17
Warn users if their system doesn't support GL_ATI_pn_triangles.
2004-01-26 03:58:19 +00:00
Ragnvald Maartmann-Moe IV
767b0c61db
Fix help for gl_tessellate cvar.
2004-01-26 00:40:31 +00:00
Ragnvald Maartmann-Moe IV
e1146a541c
TruForm support. Controlled by gl_tessellate
2004-01-26 00:13:47 +00:00
Bill Currie
3a8cfb050e
fix alpha blending in 2d mode when 3d has never been rendered
2003-09-05 06:48:03 +00:00
Ragnvald Maartmann-Moe IV
6c7701a38b
Prevent bad gl_max_size settings from causing buggy drivers to freak out.
2003-03-24 20:21:24 +00:00
Ragnvald Maartmann-Moe IV
88c2735d9c
Make sprite rendering use vertex arrays, as a test for detection of vertex array support (tests only for OpenGL 1.1 or better, at the moment, no driver blacklist yet).
2003-03-20 19:58:18 +00:00
Bill Currie
851d203916
work towards a more secure qfs
2003-02-14 22:36:10 +00:00
Bill Currie
6a687f5e45
rename all the globals in quakefs.[ch] to be QFS_* or qfs_*
2003-02-14 19:46:07 +00:00
Bill Currie
3ab4eb6545
Arkadi's mach64 patch
2003-02-06 21:47:33 +00:00
Bill Currie
761a7546dd
re-arrange things so __attribute__ and __builtin_expect are properly
...
autoconfiscated so rcsid will continue to work with gcc 3.3
2003-01-15 15:31:36 +00:00
Bill Currie
71196fedf6
make gcc more anal about prototypes, string constants and function
...
visibility (ie, global functions must have a prototype)
2003-01-06 18:28:13 +00:00
Ragnvald Maartmann-Moe IV
0d28f4d63a
More whitespace.
2002-10-10 19:32:19 +00:00
