Commit graph

371 commits

Author SHA1 Message Date
hendricks266
b3639ae8e7 Replace most instances of casting byte arrays to wider integral types with the B_(UN)BUF functions in compat.h that were previously used only in the netcode.
I have commented out the versions of these functions that perform bitmasks and shifts and replaced them with versions that cast to and from integral types, pending performance and compatibility research across platforms.

git-svn-id: https://svn.eduke32.com/eduke32@5174 1a8010ca-5511-0410-912e-c29ae57300e0
2015-05-03 07:03:48 +00:00
hendricks266
bb4cdeb692 Make all the hictinting_apply blocks consistent. This should fix certain tints types being applied incorrectly in Polymer and the global tints (underwater and nightvision) not being applied to tints and models with certain flags.
git-svn-id: https://svn.eduke32.com/eduke32@5149 1a8010ca-5511-0410-912e-c29ae57300e0
2015-04-14 21:18:08 +00:00
hendricks266
be29f098ab Complete the necessary infrastructure so that more than one precomputed tint on a hightile texture will display.
git-svn-id: https://svn.eduke32.com/eduke32@5147 1a8010ca-5511-0410-912e-c29ae57300e0
2015-04-14 21:17:36 +00:00
hendricks266
40d6aef7fc Tints: Add blending modes Screen, Overlay, and Hard Light, as opposed to the default Multiply. This value is encoded in bits 6 and 7 of the "flags" parameter. In other words, calculate your flags besides these modes, then bitwise OR the resulting value with:
0 - Multiply
64 - Screen
128 - Overlay
192 - Hard Light

Note: These will likely look terrible when combined with the Colorize flag, because of the nature of the Colorize flag.

git-svn-id: https://svn.eduke32.com/eduke32@5146 1a8010ca-5511-0410-912e-c29ae57300e0
2015-04-14 08:08:02 +00:00
hendricks266
d4fb3dfe96 Eliminate a check that a model's sector's floorpal is nonzero before applying a tint.
git-svn-id: https://svn.eduke32.com/eduke32@5143 1a8010ca-5511-0410-912e-c29ae57300e0
2015-04-14 08:07:08 +00:00
hendricks266
68e4248cd2 Polymer: Account for HICTINT_APPLYOVERALTPAL and HICTINT_USEONART.
git-svn-id: https://svn.eduke32.com/eduke32@5142 1a8010ca-5511-0410-912e-c29ae57300e0
2015-04-14 08:06:51 +00:00
terminx
112652c5b9 Polymer tsectortype usage. DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@5072 1a8010ca-5511-0410-912e-c29ae57300e0
2015-03-24 00:40:21 +00:00
hendricks266
97025d9fc7 Add "globalflags" def token. Flag 1 is a kill switch for the tileshades and artmapping features. Flag 2 is kill switch for the GL fullbright rendering pass.
git-svn-id: https://svn.eduke32.com/eduke32@5056 1a8010ca-5511-0410-912e-c29ae57300e0
2015-03-09 20:32:36 +00:00
terminx
f3e8ffa714 Fix Polymer when switching from Polymost
git-svn-id: https://svn.eduke32.com/eduke32@5011 1a8010ca-5511-0410-912e-c29ae57300e0
2015-02-18 01:47:06 +00:00
terminx
4911b9a949 Revise C++ structure trackers for performance and introduce "tspritetype", for temporary sprites or other usages where using the trackers would be invalid or undesired. DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4898 1a8010ca-5511-0410-912e-c29ae57300e0
2015-01-11 04:55:07 +00:00
helixhorned
a20a7878bb Polymer: include wall[].ypanning in wall invalidation logic.
Fixes bug reported here:
http://forums.duke4.net/topic/1348-mapster32-problems-and-bugs/page__view__findpost__p__213759

git-svn-id: https://svn.eduke32.com/eduke32@4833 1a8010ca-5511-0410-912e-c29ae57300e0
2014-12-21 15:51:51 +00:00
helixhorned
b4472f60d1 Polymer: don't draw masked walls with void tile. DONT_BUILD.
This prevents displaying W_FORCEFIELD+1 masks (as e.g. in front of viewscreens)
completely black with ART mapping. The old behavior, which is inconsistent with
classic, is kept for one-sided masked walls, though.

git-svn-id: https://svn.eduke32.com/eduke32@4830 1a8010ca-5511-0410-912e-c29ae57300e0
2014-12-20 13:36:40 +00:00
terminx
9601554320 Fix MSVC warning in Polymer
git-svn-id: https://svn.eduke32.com/eduke32@4701 1a8010ca-5511-0410-912e-c29ae57300e0
2014-10-29 17:06:20 +00:00
terminx
8934226bb2 Another 5000 lines of pain and tears. DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4680 1a8010ca-5511-0410-912e-c29ae57300e0
2014-10-25 03:36:34 +00:00
terminx
c8ea7baf72 set_globalpos(), updates both integer (globalposx/y/z) and float (fglobalposx/y/z) representations of the current camera view position. Storing the float representation pre-converted saves us from the delay incurred on ARM when converting an integer and transferring it to the FPU, though this delay is mostly negated already by using the hardfp ABI.
git-svn-id: https://svn.eduke32.com/eduke32@4667 1a8010ca-5511-0410-912e-c29ae57300e0
2014-10-25 03:32:26 +00:00
terminx
6c6b68d534 Various additional optimizations: add CLASSIC_SLICE_BY_4 mode to unroll some of the loops in a-c, replace integer divisions by a divisor unknown at compile time with usage of libdivide, clean up pragmas further by removing more old stuff that wasn't used anywhere. This is another one of those nasty commits that make people cry. DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4658 1a8010ca-5511-0410-912e-c29ae57300e0
2014-10-25 03:29:21 +00:00
hendricks266
295cf82323 Clean up warnings and build issues when building under OS X 10.9. DONT_BUILD.
git-svn-id: https://svn.eduke32.com/eduke32@4644 1a8010ca-5511-0410-912e-c29ae57300e0
2014-10-16 21:03:24 +00:00
terminx
144a4798ce More Polymost cleanup, also consolidate tilesizx and tilesizy into a single tilesiz vec2_t to ensure both x and y are always in the same cache line. I may add a new vec2_16t later. Still need to take care of emulating the old flat array for the sake of CON access.
git-svn-id: https://svn.eduke32.com/eduke32@4623 1a8010ca-5511-0410-912e-c29ae57300e0
2014-09-30 04:14:21 +00:00
terminx
683a5eb11f Minor polymer changes... reuse allocated _prplanelist structs to avoid potentially thousands of malloc calls per frame rendered, clean up "searchit == 2" functionality, move sector light invalidation to sector updates instead of wall updates (avoids a ton of unnecessary function calls), other minor changes
git-svn-id: https://svn.eduke32.com/eduke32@4600 1a8010ca-5511-0410-912e-c29ae57300e0
2014-09-30 04:04:30 +00:00
helixhorned
1e5549dc2f Polymost: r_npotwallmode, emulating 8-bit for walls w/ nonpow2 height textures.
When that mode is enabled (see below for caveats), wall textures that have a
non-power-of-two height (call it 'h') will be modified to look like in classic:
Let 'H' be the next power of two greater than 'h'. The texture will be uploaded
with height 'H', made up from 'h' hlines of the original texture, followed by
'H'-'h' first hlines of the same.
No panning "corrections" will take place. The mode is disabled by default.

Caveats/notes:
 * the mode requires that r_hightile is disabled
 * it is not implemented in Polymer
 * in the Lunatic build, it is ineffective when a VX map is loaded, as those
   display walls with NPOT height textures correctly

git-svn-id: https://svn.eduke32.com/eduke32@4498 1a8010ca-5511-0410-912e-c29ae57300e0
2014-06-01 11:55:19 +00:00
helixhorned
0900f4066c Bye, bye, B*alloc(), all hail X*alloc()! Replace large portion of the calls...
... and cull code that is dead with the X*alloc() versions since they never
return NULL on requesting memory.

Use something like
 git grep '[^Xx]\(m\|c\|re\)alloc *('
and
 git grep '[^Xx]strdup *('
to see places where I left the B*alloc() calls intact.

BUILD_LUNATIC.

git-svn-id: https://svn.eduke32.com/eduke32@4491 1a8010ca-5511-0410-912e-c29ae57300e0
2014-05-30 00:02:19 +00:00
helixhorned
95a6c01045 A couple of stylistic cleanups and missed DAMETH_* flags substitutions.
git-svn-id: https://svn.eduke32.com/eduke32@4489 1a8010ca-5511-0410-912e-c29ae57300e0
2014-05-30 00:02:14 +00:00
helixhorned
6fb9929f44 Factor out commonly occuring hictinting[]-accessing code into three functions.
Note: in polymer.c, this was buggy (but harmless) because .r is a char:
  if ((uint32_t)hictinting[MAXPALOOKUPS-1].r & 0xFFFFFF00) != 0xFFFFFF00)

git-svn-id: https://svn.eduke32.com/eduke32@4487 1a8010ca-5511-0410-912e-c29ae57300e0
2014-05-28 22:40:17 +00:00
helixhorned
69c867b8e3 Replace various GL rendering related literal flags with enum labels.
- pthtyp pth->flags bits
- Flags of the <dameth> argument of various functions
- hictinting[].f / gloadtile_hi() and daskinloader() <effect> arg bits
- hicreplctyp hicr->flags bits
- texcacheheader cachead.flags bits

git-svn-id: https://svn.eduke32.com/eduke32@4486 1a8010ca-5511-0410-912e-c29ae57300e0
2014-05-28 22:40:16 +00:00
helixhorned
dfa9daa5d3 Polymost: in NPOT wall ypanning "correction", behave like Polymer in one corner case.
Specifically, the handling of one-way walls ([1] in Mapster32) was slightly
different.

git-svn-id: https://svn.eduke32.com/eduke32@4484 1a8010ca-5511-0410-912e-c29ae57300e0
2014-05-28 22:40:14 +00:00
hendricks266
20bf310cba Fix two Polymer crashes related to corrupted maps.
git-svn-id: https://svn.eduke32.com/eduke32@4471 1a8010ca-5511-0410-912e-c29ae57300e0
2014-05-17 12:36:03 +00:00
helixhorned
1c5da19874 In non-lookup GL modes, if fog is due to fogpal, make fog params indep. of shade.
git-svn-id: https://svn.eduke32.com/eduke32@4460 1a8010ca-5511-0410-912e-c29ae57300e0
2014-05-01 22:02:21 +00:00
helixhorned
bd0febb846 In non-lookup OpenGL modes, make sector[].filler (rename pending) override fogpal.
That is, if that member has a nonzero value, that one is taken for the color of
the GL fog instead of (most of the time) sector[].floorpal. "Sky sectors", that
is, skyboxes or simply parallaxed floors/ceilings are *not* handled.

git-svn-id: https://svn.eduke32.com/eduke32@4415 1a8010ca-5511-0410-912e-c29ae57300e0
2014-04-05 11:28:08 +00:00
helixhorned
7da6380dcb Amend r4394: don't use full brightness (glColor() factor 1) with hightiles.
This is done by factoring out some polymer.c:polymer_getbuildmaterial() code
into polymer_eligible_for_artmapping() and using that. The one in polymer.c
can still determine to not use ART mapping on some ("rare"?) occasions, so
it's not 100% in sync.

git-svn-id: https://svn.eduke32.com/eduke32@4407 1a8010ca-5511-0410-912e-c29ae57300e0
2014-03-30 13:53:09 +00:00
helixhorned
7a3776dfac Polymost: introduce r_usenewshading 3 and make it the default.
With this mode, the near distance of the linear fog is always 0, unlike being
negative with r_usenewshading 2.

git-svn-id: https://svn.eduke32.com/eduke32@4393 1a8010ca-5511-0410-912e-c29ae57300e0
2014-03-23 23:14:48 +00:00
terminx
2177591619 Add xxHash (https://code.google.com/p/xxhash/), a faster alternative to CRC32, and implement it in a few places. This is around 20-30% faster than CRC32 for me (it's also implemented into the "fileinfo" console command, so you can test for yourselves). I didn't have time to gather up all of the files supported by the startup window so this isn't used there yet. Additionally, this is by the same author as the LZ4 compression library we already use.
git-svn-id: https://svn.eduke32.com/eduke32@4387 1a8010ca-5511-0410-912e-c29ae57300e0
2014-03-22 09:26:39 +00:00
helixhorned
b1b0da2852 Polymer: factor out polymer_invalidateartmap(), use it in invalidatetile().
This fixes updating the viewscreen in Polymer's ART mapping mode.

git-svn-id: https://svn.eduke32.com/eduke32@4304 1a8010ca-5511-0410-912e-c29ae57300e0
2014-02-08 14:37:53 +00:00
helixhorned
e379cd3655 Polymer: factor out polymer_invalidatesprite(), use when viewscreen tex changed.
Also, rewrite invalidatetile() for clarity.

git-svn-id: https://svn.eduke32.com/eduke32@4303 1a8010ca-5511-0410-912e-c29ae57300e0
2014-02-08 14:37:52 +00:00
helixhorned
19da43d23b Polymer: invalidate a wall when its sector's visibility has changed.
git-svn-id: https://svn.eduke32.com/eduke32@4192 1a8010ca-5511-0410-912e-c29ae57300e0
2013-12-06 18:56:42 +00:00
helixhorned
4d71ed75d2 Polymer: fix ANM playback.
References:
 - r3742
 - r4038 (fixing savegame screenshots, but introducing the now fixed bug)

git-svn-id: https://svn.eduke32.com/eduke32@4094 1a8010ca-5511-0410-912e-c29ae57300e0
2013-10-11 22:20:43 +00:00
terminx
322888ce83 Fix "The latest builds show the same screenshot for every save game entry", reported at http://forums.duke4.net/topic/2961-paper-cuts-minor-bugs-and-annoyances/page__view__findpost__p__169847
git-svn-id: https://svn.eduke32.com/eduke32@4038 1a8010ca-5511-0410-912e-c29ae57300e0
2013-08-24 22:55:37 +00:00
helixhorned
9f280bcaf2 polymer.c: remove redundant NULL pointer check in polymer_invalidateplanelights().
Redundant for the same reason as the preceding one: the pointer has already
been dereferenced at the point the check is made. Also, all 5 calls of that
function pass a valid pointer (provided the pointers from which the expressions
are derived are valid). Reported by Stack, too.

git-svn-id: https://svn.eduke32.com/eduke32@4017 1a8010ca-5511-0410-912e-c29ae57300e0
2013-08-12 15:18:22 +00:00
terminx
af287cf452 Revert "Silence FBO initialization failure message on Intel HD 4000 by moving the glCheckFramebufferStatusEXT() call to below the glBindFramebufferEXT() call. The error returned on HD 4000 previously was something to do with the framebuffer being incomplete, and this seems to fix it, so hopefully it's right."
This reverts commit 9a2617eb263e53a348e10c82bf1ba58feed65afc.

git-svn-id: https://svn.eduke32.com/eduke32@3995 1a8010ca-5511-0410-912e-c29ae57300e0
2013-08-07 00:56:37 +00:00
terminx
f368bc1a03 Silence FBO initialization failure message on Intel HD 4000 by moving the glCheckFramebufferStatusEXT() call to below the glBindFramebufferEXT() call. The error returned on HD 4000 previously was something to do with the framebuffer being incomplete, and this seems to fix it, so hopefully it's right.
git-svn-id: https://svn.eduke32.com/eduke32@3985 1a8010ca-5511-0410-912e-c29ae57300e0
2013-08-06 23:52:16 +00:00
helixhorned
57822a2481 Polymer: slightly more complete handling of (multi-tile) ART skies.
- Use the proper tile sequence when multiple pskies are present in a map.
  However, there's still only *one* psky chosen at map load time.
- Handle three horizfrac cases:
 * 0, psky always at same level wrt screen
 * 65536, psky horiz follows camera horiz (e.g. E4L9)
 * otherwise, fall back to default hard-coded parallax implemented as an
   angle fraction

git-svn-id: https://svn.eduke32.com/eduke32@3977 1a8010ca-5511-0410-912e-c29ae57300e0
2013-08-04 20:37:49 +00:00
helixhorned
a374a401be Clean up parallaxed sky functionality, part 2.
- Rename sky_t members: yscale -> horizfrac, bits -> lognumtiles.
- Add default sky (8 tiles, horizfrac=32768 (i.e. 1/2 the scene horiz), offsets
  all zero) and CLOUDYOCEAN sky (8 tiles, horizfrac=65536, offsets all zero)
  to multipsky[].
- Get rid of "psky_t g_psky", merely maintaining a g_pskyidx instead. Set it up
  at map load time so as to keep the behavior of the legacy per-map psky:
  the last sector index with a matching psky ceiling wins.
- In mapstate_t, save g_pskyidx too, not (former) pskybits and pskyoffs[].
- Make on-map-load global psky setup consistent for the game and editor by
  factoring it out into common.c: G_SetupGlobalPsky().
- Remove a couple of useless initializations, add some static assertions.

This commit is more likely to introduce subtle differences in behavior.
Specifically, getpsky() now always returns the default sky properties instead of
the global sky ones (but with all-zero offsets) when no match for a suiting
multi-psky is found. This is only likely to affect the yscale/horizfrac of
non-multi-pskies when a global non-default multi-psky has been set up.
Bump BYTEVERSION again.

git-svn-id: https://svn.eduke32.com/eduke32@3976 1a8010ca-5511-0410-912e-c29ae57300e0
2013-08-04 20:37:48 +00:00
helixhorned
46e8549b5e Clean up parallaxed sky functionality, part 1.
- Consolidate psky* arrays into a "typedef struct psky_t" "g_psky" and
  "multipsky[]".
- Factor out getting parallaxed sky properties into getpsky().
- Condense initial multi-psky setup by memcpy'ing from multipsky[].
- New function: MultiPsky_TileToIdx().
- Add new define PSKYOFF_MAX and related consistency-checking assertions.
- Lower MAXPSKYTILES to 8 to reflect current usage (was 256).
- Game: make multi-pskies consider dynamically-remapped MOONSKY1, BIGORBIT1
  and LA. (Not very useful as the editor will still only act for the static
  values -- 80, 84 and 89, respectively.)

An attempt has been made to preserve behavior even in strange cases, so this
commit is unlikely to introduce regressions. Because of point 6, BYTEVERSION
had to be bumped.

git-svn-id: https://svn.eduke32.com/eduke32@3975 1a8010ca-5511-0410-912e-c29ae57300e0
2013-08-04 20:37:45 +00:00
helixhorned
2945a966e1 Polymer/ART mapping: fix formula for globalvisibility.
Also, very slightly tweak a factor toward a "brighter" (farther visible)
scene overall to account for the "circular" nature of the fragment distance
(as opposed to an "ortho" distance in Build).

git-svn-id: https://svn.eduke32.com/eduke32@3962 1a8010ca-5511-0410-912e-c29ae57300e0
2013-07-18 18:08:15 +00:00
helixhorned
184a7322de Polymodes/Lunatic: don't do y panning "correction" for nonpow2 ysize tiles.
git-svn-id: https://svn.eduke32.com/eduke32@3926 1a8010ca-5511-0410-912e-c29ae57300e0
2013-07-04 19:38:37 +00:00
helixhorned
d25dcbff17 Polymer: Fix one-sided y-flipped floor-aligned sprites, introduced in r3776.
Add a test case in test_tileoffsets.map.

git-svn-id: https://svn.eduke32.com/eduke32@3869 1a8010ca-5511-0410-912e-c29ae57300e0
2013-06-11 20:03:39 +00:00
helixhorned
43520eba5b Polymer: fix possible NULL pointer dereference in polymer_getbuildmaterial().
git-svn-id: https://svn.eduke32.com/eduke32@3799 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-22 16:23:14 +00:00
terminx
f8cc394fa3 Sanitize hard coded render mode numbers... replace all references to rendmode 0, 3, 4, etc with proper REND_CLASSIC, REND_POLYMOST, REND_POLYMER labels.
git-svn-id: https://svn.eduke32.com/eduke32@3784 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-17 03:44:09 +00:00
helixhorned
6e364b1f4b Polymer: fix centering of y-flipped wall sprites. (Case D in test_tileoffsets.)
git-svn-id: https://svn.eduke32.com/eduke32@3779 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-16 21:54:58 +00:00
helixhorned
946d207c56 Polymodes: make flipping closer to classic.
This fixes cases A and B in test_tileoffsets.map.

git-svn-id: https://svn.eduke32.com/eduke32@3778 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-16 21:54:56 +00:00
helixhorned
91523f60b1 Polymer: fix floor sprites with y flipping by removing special-case code.
This fixes the case marked with the silver letter C in test_tileoffsets.map.
The orientation of the sprites is correct (matches classic) as far as I can
see, there are now only problems with translation.

git-svn-id: https://svn.eduke32.com/eduke32@3776 1a8010ca-5511-0410-912e-c29ae57300e0
2013-05-16 21:54:53 +00:00