- make inside_editor() static in build.c
- replace comparisons of inside()'s return values with 0 by ones with 1
(since a returned 0 can mean -1 or 1, i.e. oob sector or is really inside)
- prevent a theoretically possible oob access in correct_ornamented_sprite()
git-svn-id: https://svn.eduke32.com/eduke32@3038 1a8010ca-5511-0410-912e-c29ae57300e0
- factor out the "is inside" predicates
- rename updatesector_onlynextwalls() -> updatesectorbreadth()
- add ATTRIBUTE((nonnull(4))) to the bitmap arg of updatesectorexclude().
git-svn-id: https://svn.eduke32.com/eduke32@3037 1a8010ca-5511-0410-912e-c29ae57300e0
It's mostly taking over the NASM code, with a couple of changes:
- declarations for externals and globals are slightly different
- the masm seems to have e.g. "dword ptr [...]" where the nasm has only
"dword [...]", though the masm also has a couple of the latter. The "ptr"
modifier seems kinda redundant to me, but I added it to every indirection
anyway.
git-svn-id: https://svn.eduke32.com/eduke32@3033 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, we used them in our builds for sprites, but MSVC builds don't have
the ASM ported to MASM, and thus the workaround of ignoring the linking errors
was not safe.
git-svn-id: https://svn.eduke32.com/eduke32@3031 1a8010ca-5511-0410-912e-c29ae57300e0
Hendricks found a bug caused by that commit, so this one enables exprimentation
with setbrightness() bit 1 behavior.
git-svn-id: https://svn.eduke32.com/eduke32@3025 1a8010ca-5511-0410-912e-c29ae57300e0
See the comment in source/osdcmds.c for instructions on its usage.
git-svn-id: https://svn.eduke32.com/eduke32@3021 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the splitscreen mod not have a ridiculous view distortion.
Such scenes will have no correction for non-square pixels, though.
git-svn-id: https://svn.eduke32.com/eduke32@3020 1a8010ca-5511-0410-912e-c29ae57300e0
This trims four 4k pages of code from the release EDuke32 build and
one page from Mapster32.
git-svn-id: https://svn.eduke32.com/eduke32@2991 1a8010ca-5511-0410-912e-c29ae57300e0
When this happens, parallaxmodes other than 0 will be unavailable and silently
draw as parallaxmode 0. This usually happens with extremely wide resolutions.
git-svn-id: https://svn.eduke32.com/eduke32@2990 1a8010ca-5511-0410-912e-c29ae57300e0
We're pulling stuff from math.h even in non-GL builds right now, so
adding libc's sin() and atan() doesn't seem like a big deal. In the
unlikely event that their accuracy is so bad that the calculated tables
don't match the original ones, a warning is issued on little-endian
platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2988 1a8010ca-5511-0410-912e-c29ae57300e0
For reference, they are the following:
- cache1d.c: suckcache()
- build.c: compare_wall_coords()
- make switch-invisible heuristic
- Mapster32: old sprite search
- Mapster32: manual z range
- m32script: read/writearray, qgetsysstr
- menus.c: savetemp()
git-svn-id: https://svn.eduke32.com/eduke32@2981 1a8010ca-5511-0410-912e-c29ae57300e0
This is really an artifact of overloading the sector fields for different uses.
For copy-pasting TROR'd portions, the bug still persists.
git-svn-id: https://svn.eduke32.com/eduke32@2963 1a8010ca-5511-0410-912e-c29ae57300e0
A debug macro to test tints being stuck at the least intense non-zero value
is provided in engine.c.
git-svn-id: https://svn.eduke32.com/eduke32@2952 1a8010ca-5511-0410-912e-c29ae57300e0
Because rotating sectors "smoothly" by 1 BUILD ang will quickly accumulate
roundoff error, this lets the user first do that as a preview and then use the
manual angle rotation do carry it out for real.
git-svn-id: https://svn.eduke32.com/eduke32@2942 1a8010ca-5511-0410-912e-c29ae57300e0
ROTATESPRITE_MAX is moved to build.h and all orientation bits from CON commands
using rotatesprite are ANDed with (ROTATESPRITE_MAX-1). Some of the functions
use ROTATESPRITE_MAX for different internal purposes, which will not be exposed
to CON now (a good thing). Also, dorotspr_handle_bit2 is made clearer.
git-svn-id: https://svn.eduke32.com/eduke32@2929 1a8010ca-5511-0410-912e-c29ae57300e0
The black translucent background underneath the user map list will now
be drawn with a shade 32 tile 0 instead of tile BLANK, since I've seen
the latter being replaced in some mod. Also, it will look the same
regardless of screen aspect.
git-svn-id: https://svn.eduke32.com/eduke32@2928 1a8010ca-5511-0410-912e-c29ae57300e0
Don't call setaspect from them, because the only thing that's needed is
(in classic) yxaspect and xyaspect. Pass these from the helper function
defined earlier instead.
git-svn-id: https://svn.eduke32.com/eduke32@2921 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes stuff like the HUD chaingun with widescreen and small "screen sizes"
(in-game viewport). It also makes rotatesprite behave more like classic overall.
I have no idea why it was there in the first place.
git-svn-id: https://svn.eduke32.com/eduke32@2918 1a8010ca-5511-0410-912e-c29ae57300e0
setaspect(), which is called by setaspect_new, already uses the *dimen variables,
so it's the same thing done twice. Now, a change from the original full status
bar to the original mini status bar keeps the horizontal FOV again and only
bumps the view a little higher, as with the classic aspect determination.
git-svn-id: https://svn.eduke32.com/eduke32@2913 1a8010ca-5511-0410-912e-c29ae57300e0
This means that classic and the GL modes now look the same as far as e.g.
hud_bgstretch or HUD weapons are concerned.
git-svn-id: https://svn.eduke32.com/eduke32@2911 1a8010ca-5511-0410-912e-c29ae57300e0
Instead of setting and resetting the [xy]dim globals, use them as locals
in a block (shadowing the globals). Also, do some common subexpression
elimination for clarity.
git-svn-id: https://svn.eduke32.com/eduke32@2908 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the code rather more readable in some places. Unlike the two
preceding commits, this one is actually purely textual replacement.
git-svn-id: https://svn.eduke32.com/eduke32@2877 1a8010ca-5511-0410-912e-c29ae57300e0
The idiv instruction also signals an FPE when the resulting *signed* quotient
overflows, so we simply use div instead.
git-svn-id: https://svn.eduke32.com/eduke32@2850 1a8010ca-5511-0410-912e-c29ae57300e0
These could manifest themselves as garbage lines on the bottom and
happened because of the ydim vs. bytesperline discrepancy again.
git-svn-id: https://svn.eduke32.com/eduke32@2844 1a8010ca-5511-0410-912e-c29ae57300e0
This changes a constant inside the panning calculation from 256 to 255 (making
e.g. panning 255 and 0 the same in the "San Andreas fault" sign in E1L5) and
uses the correct reference wall for the "do panning correction?" conditional.
Now, the problematic walls should look the same as in Polymost.
git-svn-id: https://svn.eduke32.com/eduke32@2822 1a8010ca-5511-0410-912e-c29ae57300e0
This makes the corrections conditional on where they appear in (under-, over-,
white or mask wall).
git-svn-id: https://svn.eduke32.com/eduke32@2821 1a8010ca-5511-0410-912e-c29ae57300e0
I'm willing to make this one concession to correctness in the name of backward-
compatibility. I think that one reason why this has never cause a crash is that
tiles in BUILD are allocated in Ken's big allocache buffer, so oob accesses were
dampened by that (though they hit uninitialized data).
git-svn-id: https://svn.eduke32.com/eduke32@2819 1a8010ca-5511-0410-912e-c29ae57300e0
The event is run after drawing the scene, but before the overlays. To
make a screenshot from a script, set DOSCRSHOT to non-zero. It will then
be scheduled to run once after the drawing but before the above-mentioned
event. The screenshots will be called mcapXXXX.{png,tga}.
git-svn-id: https://svn.eduke32.com/eduke32@2818 1a8010ca-5511-0410-912e-c29ae57300e0
This would only hit when polymost_printext256 erred out (mem alloc failure,
glGenTextures failure), i.e. "almost never".
Also, tweak a bound check in polymost_printext256.
git-svn-id: https://svn.eduke32.com/eduke32@2817 1a8010ca-5511-0410-912e-c29ae57300e0
Non-pow2 wall/mask drawing in classic introduced cases where walls are
drawn "incorrectly" because they were constructed with the old behavior
in mind. Polymer appears to "correct" for it partially, but doesn't cover
all cases. Specifically, now we have:
- E1L1 first inside secret room (5000, 50000): Polymer draws like Duke 1.5,
classic now draws with an offset.
- E3L2 near the vault (-20000, 25000): both classic and Polymer draw with
offsets compared to Duke 1.5, but they're different!
This means that more research is needed into what makes these two cases
diverge, even though both have the same root cause.
!!! Also, mappers should abstain from using non-power-of two textures on
walls until this issue is resolved in a satisfactory fashion !!!
git-svn-id: https://svn.eduke32.com/eduke32@2811 1a8010ca-5511-0410-912e-c29ae57300e0
This was introduced with r2771, which fixed e.g. AMC TC city_si's mirrors,
but instructed the base drawrooms inside yax_drawrooms to not correct the
passed sectnum. Therefore, stuff would get drawn wrongly when passing
sector boundaries, like from the platform to the rails in trueror1.map.
git-svn-id: https://svn.eduke32.com/eduke32@2810 1a8010ca-5511-0410-912e-c29ae57300e0
The latter is commented out, since it has to be *compiled* with
script_expertmode enabled.
git-svn-id: https://svn.eduke32.com/eduke32@2808 1a8010ca-5511-0410-912e-c29ae57300e0
Related to that, it looks like out-of-bounds accesses when drawing such walls/
maskwalls or *sprites* are fixed, too. Sprites still show a stray lines on some
occasions, but Valgrind doesn't complain then.
git-svn-id: https://svn.eduke32.com/eduke32@2805 1a8010ca-5511-0410-912e-c29ae57300e0
-Wwrite-strings is useful to detect code where string literals and e.g. alloc'd
strings are used side-by-side, potentially creating dangerous situations, or to
find uses of old, non-constified APIs. However, enabling it would still flood
the log with too many warnings. Also, GCC wrongly warns for initializations of
char arrays.
git-svn-id: https://svn.eduke32.com/eduke32@2796 1a8010ca-5511-0410-912e-c29ae57300e0
uhypsq calculates the hypotenuse using unsigned multiplication. This is
permissible since for arbitrary int32s a and b, the following holds in
two's complement arithmetic:
(int32_t)((uint32_t)a * b) == (int32_t)((int64_t)a * b)
("Signed and unsigned multiplication is the same on the bit level.")
This fixes various overflows where wall lengths for walls of length > 46340
are calculated, but does not rid us of other overflows in the same vein
(usually dot products between vectors where one point is a wall vertex and
the other a position in a sector).
git-svn-id: https://svn.eduke32.com/eduke32@2791 1a8010ca-5511-0410-912e-c29ae57300e0
That is, "clang -ftrapv" builds don't abort almost immediately after entering
a level.
There are various classes of overflow bugs, needing different handling:
- Some texture mapping code was written with signed integer wrapping semantics
in mind. In some places, we're able to get away with unsigned casts.
- sometimes, we really need a wider range, like when calculating distances or
dot products
- negating INT_MIN. Here, we cast to int64_t temporarily. Note that if the
result is 32-bit wide, no 64-bit code may actually need to be generated.
- shifting into a signed integer's sign bit. We cast to uint32 here.
- in hitscan(), at the "abyss crash prevention code" comment, it's clearly
the other code that is better...
This is not merely done for pedantry, but rather makes it easier to track down
overflow bugs having a real impact on the game.
git-svn-id: https://svn.eduke32.com/eduke32@2784 1a8010ca-5511-0410-912e-c29ae57300e0
For SDL 1.2 and when building on linux, the code using
clock_gettime(CLOCK_MONOTINIC, ...) is taken over from SDL HG.
gethitickms() is a convenience function that return milliseconds as
doubles and isn't exposed in any header file, yet.
git-svn-id: https://svn.eduke32.com/eduke32@2778 1a8010ca-5511-0410-912e-c29ae57300e0
Doesn't work: indexed-color modes, gamma (at least for X11), mouse wheel,
special keys like ENTER or BACKSPACE in the OSD, probably more...
In build/Makefile.shared, we now have logic to autodetect an SDL2 installed
in /usr/local, however OS X and Wii builds follow other Makefile code paths,
it seems. Note that the matching SDL2_mixer must be used then, too.
In source/jaudiolib/src/driver_sdl.c, change the #includes from <SDL/SDL_xxx.h>
to "SDL_xxx.h". SDL wiki says this is the most portable way, hopefully this
doesn't break builds for anyone.
git-svn-id: https://svn.eduke32.com/eduke32@2777 1a8010ca-5511-0410-912e-c29ae57300e0
This was actually broken all the time except when ALL sectors were selected
(which was what I tested incidentally when I wrote the first "fix"). D'oh!
git-svn-id: https://svn.eduke32.com/eduke32@2773 1a8010ca-5511-0410-912e-c29ae57300e0
It's time to replace some int32s with 64-bit ints in core engine functions.
The problem is that for example, the dot product is taken between vectors that
may be the difference between two arbitrary points in a sector, so even if one
sticks to the "no blue walls" rule, that doesn't guarantee freedom from
overflows.
git-svn-id: https://svn.eduke32.com/eduke32@2761 1a8010ca-5511-0410-912e-c29ae57300e0
Bang! One more invalid internals exposure squashed. Maybe one day we'll be able
to call EDuke32 "stable"...
Actually the offending sprite IS drawn as face sprite with shade 32 and xrepeat
and yrepeat 255 for the convenience of the CON coder who will have to debug it.
git-svn-id: https://svn.eduke32.com/eduke32@2744 1a8010ca-5511-0410-912e-c29ae57300e0
Those were happening when wall drawing in an upper/lower layer "closed" too
much of the "curtain" (umost/dmost) for subsequent drawing in that portal.
Example: looking down the sewer manhole at the beginning of Retaliation will
now render without HOM.
git-svn-id: https://svn.eduke32.com/eduke32@2739 1a8010ca-5511-0410-912e-c29ae57300e0
New Wii control defaults for the Wii Remote + Nunchuk and the Classic Controller. This includes new code added just so that the Home key brings up the menu in-game, reducing the need for a USB keyboard.
On the technical side, raw joystick access (comparable to what is available for keyboard and mouse) is now present in jmact, on the game side. (added: joystick.[ch])
Using this new raw joystick access, I replaced tueidj's hack to map A and B to LMB/RMB and D-Pad Up/Down to the scrollwheel.
I made the menus more friendly to mouse and joystick browsing by adding and unifying checks and clears for various buttons and gamefuncs. In fact, the majority of the time spent on this commit was tracking down problems that appeared with the factoring and trying to understand the menu system and the way input checks are precariously executed.
In addition, "Press any key or button to continue" now truly means what it says.
As a result of incorporating proper raw access into control.c instead of it directly accessing the implementaiton, the program *may* no longer be affected by joystick input when it is out of focus. This follows the pattern set by the mouse, and I think this is a positive change.
A small bonus: In the classic/old keyboard preset, the key for Show_Console has been changed from '`' to 'C' because '`' is taken by Quick_Kick.
git-svn-id: https://svn.eduke32.com/eduke32@2728 1a8010ca-5511-0410-912e-c29ae57300e0
NAM and Napalm can now share their con, def, and rts files if the one for their respective game is not present because the con and rts files are identical.
Also, decapitalize two string literals missed in r2540.
git-svn-id: https://svn.eduke32.com/eduke32@2726 1a8010ca-5511-0410-912e-c29ae57300e0
This introduces a Makefile variable EDUKE32_MY_DEVELOPER_ID, which is
expected to come from the environment, so that minor disagreements/
preferences can be handled -- don't let it go overboard though! -- to keep
the working directory clean of stuff that one doesn't actually work on.
My ID is 805120924, i.e. "helix".
git-svn-id: https://svn.eduke32.com/eduke32@2718 1a8010ca-5511-0410-912e-c29ae57300e0
Usage is from 3D mode only. When a sector (or wall) is committed to the
clipboard, it (or the wall's sector) is saved, and is subsequently used
when auto-aligning [;-ENTER] another sector's ceiling or floor against the
reference one's. This temp. sector is reset on any structurally modifying
operation except setting first walls; also, aligning extended ceilings or
floors is impossible as they use .*xrepeat internally.
The auto-alignment does not change picnums (this can be accomplished with
the ['+ENTER] combination), but copies the orientation bits 2^{2..6} to the
alignee. Afterwards, if the reference is relative-aligned, it tweaks them,
so that every case where the two firstwalls are either parallel or perpendi-
cular is handled correctly.
It does not yet calculate the panning values.
git-svn-id: https://svn.eduke32.com/eduke32@2715 1a8010ca-5511-0410-912e-c29ae57300e0
vbit was being accessed with an int32 e.g. at address 3200 when only 3203 were
allocated. We simply alloc +1 byte.
git-svn-id: https://svn.eduke32.com/eduke32@2705 1a8010ca-5511-0410-912e-c29ae57300e0
The first means that the expensive (~0.5 ms) SHGetFileInfo() calls won't inter-
fere with smooth gameplay, but files that are opened only at game-time like
sounds won't be checked. The second means that there are now less false
positives, i.e. warnings about files that would be found due to the
check-all-{upper,lower} hack.
git-svn-id: https://svn.eduke32.com/eduke32@2702 1a8010ca-5511-0410-912e-c29ae57300e0
Also, correct the loadboard() return value checks in premap.c to be
aware of a returned -2 ("wrong map version").
git-svn-id: https://svn.eduke32.com/eduke32@2694 1a8010ca-5511-0410-912e-c29ae57300e0
Most of the time, Windows file name lookup is case-insensitive. Reading the
docs (see MSDN's CreateFile help, for example), it seems like case-sensitivity
can be controlled on a per-file basis where applicable (NTFS), but people
should be concerned about matching case in the DEFs/on disk *especially* in
that case.
Also, note that this hack will not always help on systems with case-sensitive
lookup.
git-svn-id: https://svn.eduke32.com/eduke32@2693 1a8010ca-5511-0410-912e-c29ae57300e0
When a file from the local file system is opened, its real file name is gotten
with SHGetFileInfo() and compared against the one that was passed. In the case
they're not identical, a warning is issued.
This is one step towards eliminating mismatched file names in DEFs etc., which
cause trouble on systems that look them up case-sensitively. However, it's not
perfect because the issue is trickier than it appears on first sight.
For one thing, this will only check the last (i.e. file) part in the path,
falsely accepting mismatched directory names. However for these, it reports
them ruthlessly, even for those names where the try-other-case hack (try all
uppercase, all lowercase) would find the correctly-cased file.
git-svn-id: https://svn.eduke32.com/eduke32@2692 1a8010ca-5511-0410-912e-c29ae57300e0
This should be more correct, since previously, the saved PNGs were way too
contrasty when looked from within a browser. Now, they'll always be
slightly darker than in-game (assuming one has a gamma greater than 1).
git-svn-id: https://svn.eduke32.com/eduke32@2673 1a8010ca-5511-0410-912e-c29ae57300e0
- Make MAXXDIM and MAXYDIM macros be 860 and 490, respectively. tueidj says
max. screen size is 848x480, but there are oob access bugs in the classic
renderer when running with the maximum possible resolution
- don't allocate additional sector/wall storage for Mapster (saves ~16k)
- Add ud.config.UseJoystick = 1 in config.c, but make it conditional on Wii
- remove one comment I no longer believe true, add one TODO comment
git-svn-id: https://svn.eduke32.com/eduke32@2645 1a8010ca-5511-0410-912e-c29ae57300e0
Among other things, comment out very seldomly (or not at all)
used sprite member macros: SV, ZV, RX, RY, CX, CY, CD, PL.
git-svn-id: https://svn.eduke32.com/eduke32@2639 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, we checked whether the faded palette has changed (by way of CRC)
and invalidated the textures then unless the preserve flags were set. This
however could lead to wrongly invalidating them under unfortunate circumstances,
e.g. basepal change from CON + tints at the same time before r2620 which
reverted r2232.
Now, only invalidate them if the corresponding preserve flags are clear AND
* the base palette has really changed OR
* the palette CRC changed and we were running on software gamma
The latter means that performance-killing invalidations may still happen on
GL platforms lacking HW gamma (for ATI, it's currently only disabled in 8-bit
fullscreen).
Also have a new global 'basepalreset' to fake a basepal change for
setbrightness(), currently used when changing renderers so that going from
Polymer to Polymost and back again will invalidate the Polymer textures
on the second change, potentially re-applying a basepal highpal. (Still
with me?)
git-svn-id: https://svn.eduke32.com/eduke32@2636 1a8010ca-5511-0410-912e-c29ae57300e0
This was fixed with the preceding change; software mode will now always use
software gamma if an ATI/AMD card is detected.
git-svn-id: https://svn.eduke32.com/eduke32@2634 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, I knew no way of querying for graphics adapter vendors/names from
anything other than OpenGL. Googling revealed a way to do this with the
Windows API.
git-svn-id: https://svn.eduke32.com/eduke32@2633 1a8010ca-5511-0410-912e-c29ae57300e0
This part is a mixture of the original patch and my changes. It seems like
tueidj had some trouble
1) getting OGG to work, which is why it's conditionally compiled out
2) struggling with endianness with the mixing routines? This may be also
due to him missing to define two others BIGENDIAN macros (our code is
in need of cleanup there). Note the change in jaudiolib/src/mix.c!
Because I added my share to this part, I might have actually broken sound
mixing on big-endian platforms.
git-svn-id: https://svn.eduke32.com/eduke32@2630 1a8010ca-5511-0410-912e-c29ae57300e0
- conditionally compiles out some code intended for the PC platforms
- compat.c: get home directory routine, access() implementation
- game.c: don't use ioctl(), lower cache1d size to 8 MiB, Wii-specific
initialization code and application directory ("apps/eduke32")
git-svn-id: https://svn.eduke32.com/eduke32@2628 1a8010ca-5511-0410-912e-c29ae57300e0
For the Wii, SDL's mutex functionality is used. The implementation in the
original patch was wrong though, so this part required non-trivial changes.
git-svn-id: https://svn.eduke32.com/eduke32@2626 1a8010ca-5511-0410-912e-c29ae57300e0
- sdlayer.c: custom "get joystick button names" routine
- jmact/mouse.c: packs some joystick events into the value returned by
MOUSE_GetButtons(): bits used are 256, 512, 4096, 8192
- MOUSE_Init() --> Mouse_Init(), presumably because of a name clash?
- comments out right-shift of joystick analog values by 5, maybe this fixes
the scale problems with the joystick on the PC too?
git-svn-id: https://svn.eduke32.com/eduke32@2624 1a8010ca-5511-0410-912e-c29ae57300e0
The original patch was communicated to me by Hendricks, but since it didn't
apply cleanly (it's based on r2182) I took the liberty of slightly messing
with it for inclusion into EDuke32.
Info: http://wiibrew.org/wiki/User:Tueidj/Duke3D
This first part (which wasn't changed from the original patch) implements
scaling arithmetic and miscellaneous pragmas, some in PPC assembly and a part
of them in C. Of some interest is the fact that the Wii processor apparently
lacks support for 64-bit integers, so divscale() uses floating-point math.
git-svn-id: https://svn.eduke32.com/eduke32@2621 1a8010ca-5511-0410-912e-c29ae57300e0
Because gltexinvalidate*() could be called too often when setgamepalette is used
while having a tint overlaid else. Pending thorough analysis/reworking of the
32-bit mode base palette handling / texture invalidation.
git-svn-id: https://svn.eduke32.com/eduke32@2620 1a8010ca-5511-0410-912e-c29ae57300e0
That is, have a second loop over all models run for each deleted tex and
null the texname. This is ugly, sure, but it's better than calling
glDeleteTextures on stale names.
git-svn-id: https://svn.eduke32.com/eduke32@2619 1a8010ca-5511-0410-912e-c29ae57300e0
Specifically, it was in the "determine searchwall when aiming at floor or
ceiling" part. Now, if prsectors[]->ceil.plane (or ->floor.plane) is NULL,
we set the searchwall to the sector's firstwall and return.
git-svn-id: https://svn.eduke32.com/eduke32@2610 1a8010ca-5511-0410-912e-c29ae57300e0
This has been there since searchbottomwall introduction in r1466.
git-svn-id: https://svn.eduke32.com/eduke32@2604 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, we only set the viewingrange according to the physical screen's
dimensions, but didn't correct yxaspect for a potential non-square pixel
ratio.
git-svn-id: https://svn.eduke32.com/eduke32@2603 1a8010ca-5511-0410-912e-c29ae57300e0
Consequently, it's not saved as a setting in either the game or editor
config files. We do this by calling "GetSystemMetrics(SM_CXSCREEN)"
(accordingly for y) and calculating the cvar by dividing common factors,
since it has to be in the form WWHH. This may fail for _really_ strange
screen dimensions, so a log message is printed at the very beginning.
git-svn-id: https://svn.eduke32.com/eduke32@2601 1a8010ca-5511-0410-912e-c29ae57300e0
Because this doesn't even seem to work on XP, we're being spammed with
DDERR_SURFACELOST messages...
git-svn-id: https://svn.eduke32.com/eduke32@2600 1a8010ca-5511-0410-912e-c29ae57300e0
Previously, it was possible to leave a sector with less than three walls if
a point got deleted transitively by a TROR link. Now, a proper check is done
for all deletion candidates and a message stating which wall and sector is
problematic is printed. Thanks for Diaz for pointing out the brokenness.
git-svn-id: https://svn.eduke32.com/eduke32@2599 1a8010ca-5511-0410-912e-c29ae57300e0
- factor out many identical checks in a convenient function; some messages
may read slightly differently now and tile ranges may be handled more strictly
(error out if one of the limits is invalid)
- factor out two instances of identical (up to one arg) code into
tile_from_truecolpic
- factor out setting picsiz[] and stuff into set_picsizanm
- some checks
- Make "undefmodelof" non-functional and warn.
- in "animtilerange", if the tile difference is >= 64, error out since we
can't store it in picanm[]
git-svn-id: https://svn.eduke32.com/eduke32@2588 1a8010ca-5511-0410-912e-c29ae57300e0
Allow all drivers for now; if anything, we should start maintaining a
blacklist now that most Intel chips have decent enough support to be
able to run stuff satisfactorily.
git-svn-id: https://svn.eduke32.com/eduke32@2580 1a8010ca-5511-0410-912e-c29ae57300e0
This requires one tweak in drawrooms' umost/dmost setup to prevent oob access.
Specifically, a coordinate difference of 0 is allowed. In the classic renderer,
this would mean a one-pixel (real screen coords) height or width. In Polymost,
it would currently mean a one-pixel height and zero-pixel width, but this might
be subject to change.
git-svn-id: https://svn.eduke32.com/eduke32@2574 1a8010ca-5511-0410-912e-c29ae57300e0
