- Made the speed a parameter to A_RaiseMobj and A_SinkMobj and deleted
GetRaiseSpeed and GetSinkSpeed.
- Added some remaining DECORATE conversions for Hexen by Karate Chris.
SVN r1144 (trunk)
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
arbitrary point. It has been replaced with a variant that takes a polyobject
as a source, since that was the only use that couldn't be rewritten with the
other variants. This also fixes the bug that polyobject sounds were not
successfully saved and caused a crash when reloading the game. Note that
this is a significant change to how equality of sound sources is determined,
so some things may not behave quite the same as before. (Which would be a
bug, but hopefully everything still sounds the same.)
SVN r1059 (trunk)
that animated icons can be done with it.
- Changed FImageCollection to use a TArray to hold its data.
- Fixed: SetChanHeadSettings did an assignment instead of comparing
the channel ID witg CHAN_CEILING.
- Changed sound sequence names for animated doors to FNames.
- Automatically fixed: DCeiling didn't properly serialize its texture id.
- Replaced integers as texture ID representation with a specific new type
to track down all potentially incorrect uses and remaining WORDs used
for texture IDs so that more than 32767 or 65535 textures can be defined.
SVN r1036 (trunk)
were doing some things in their destructor that needed to be done in the
Destroy method.
- Rewrote the interpolation code. Interpolations are no longer some objects
that are separate from the rest of the engine. Instead, they are owned by
the thinkers starting them. Also, polyobjects only spawn a single interpolation
for each polyobject instead of a single one for each vertex.
Also, different types of interpolation objects are used for different types
of interpolation so that they can do some additional work if eventually needed.
SVN r1018 (trunk)
texture definitions. HIRESTEX is still supported but deprecated.
- Removed all 16 bit values from texture manager.
- Changed: The texture manager now sorts all textures for a WAD by type
to avoid priority issues with HIRESTEX defined textures.
- Changed sidedef flag WALLF_ADDTRANS into a linedef flag because it is
always the same for both sides of a linedef. This also makes handling
this in the UDMF parser easier because the linedef parsing function does
not need to access the sidedef data.
- Added new ZDoom specific UDMF linedef and sidedef properties to map parser.
- Added new ZDoom specific UDMF sector properties to map parser.
- Added class definitions for new interpolators that are better
equipped to interact with the interpolated objects.
- Separated interpolation code into its own file r_interpolate.cpp.
- Added some simple customization options to the end game screens.
- Fixed: Polyobject detection in the internal node builder did not work
anymore due to some code rearrangement for UDMF map loading. To keep
it compatible between all map formats the THINGS lump of binary format
maps must be loaded before building the nodes. This also means that
the spawning itself can be done in the same function for all map types
(except Build) now.
- Changed 'Smooth mouse movement' menu option from m_filter to smooth_mouse
which is more what would be expected from this option.
- Fixed: Weapons and ammo items that were modified by Dehacked gave full
ammo when being dropped by monsters. To properly handle this the
handling of spawning Dehacked modified pickups was changed to use
the DECORATE replacement feature instead of hacking the spawn state
of the original item and calling a spawn function from there.
SVN r1001 (trunk)
Since it uses fixed point parameters it can only be used in scripts though.
- Added flags parameters to all wall scroller specials that didn't use
all 5 args.
- Separated scrolling of the 3 different texture parts of a sidedef.
While doing this I did some more restructuring of the sidedef structure
and changed it so that all state changes to sidedefs that affect rendering
have to be made with access functions. This is not of much use to the
software renderer but it allows far easier caching of rendering data
for OpenGL because the only place I need to check is in the access functions.
SVN r832 (trunk)
- Changed savegame versioning so that the written version is never lower
than the minmum one reported as compatible.
- Added mirrored movement modes for linked sectors.
- Added Eternity-style initialization for linked sectors as a new subtype
of Static_Init.
- Added linked sectors. The control sector determines how they move but if
any one of the linked sectors is blocked, movement for all linked sectors
will be affected. This will allow lifts consisting out of more than one
sector without the risk of breaking them if only one of the sectors is
blocked.
- Fixed: A_Mushroom created an actor on the stack.
SVN r825 (trunk)
to be able to save the 3dMidtex attachment info.
- Fixed: The TArray serializer needs to be declared as a friend of TArray
in order to be able to access its fields.
- Since there are no backwards compatibility issues due to savegame version
bumping I closed all gaps in the level flag set.
- Bumped min. Savegame version and Netgame version for 3dMidtex related
changes.
- Changed Jump and Crouch DMFlags into 3-way switches:
0: map default, 1: off, 2: on. Since I needed new bits the rest of
the DMFlag bit values had to be changed as a result.
- fixed: PTR_SlideTraverse didn't check ML_BLOCKMONSTERS for sliding
actors without MF3_NOBLOCKMONST.
- Added MAPINFO commands 'checkswitchrange' and 'nocheckswitchrange'
that can enable or disable switch range checking globally per map.
- Changed ML_3DMIDTEX to force ML_CHECKSWITCHRANGE.
- Added a ML_CHECKSWITCHRANGE flag which allows checking whether the
player can actually reach the switch he wants to use.
- Made DActiveButton::EWhere global so that I can use it outside thr
DActiveButton class.
March 17, 2008 (Changes by Graf Zahl)
- Changed P_LineOpening to pass its result in a struct instead of global
variables.
- Added Eternity's 3DMIDTEX feature (no Eternity code used though.)
It should be feature complete with the exception of the ML_BLOCKMONSTERS
flag handling. That particular part of Eternity's implementation is
sub-optimal because it hijacks an existing flag and doesn't seem to make
much sense to me. Maybe I'll implement it as a separate flag later.
SVN r810 (trunk)
list, it should just be ignored during the propagation stage.
- After sleeping on it and realizing what was really going in, I generalized
the inventory fix from the 13th: The actor is flagged by Destroy(), then it
is later inserted into the thinker list by DThinker::SerializeAll(). So
rather than unlinking the skipped player from their inventory, just make
sure any flagged thinkers aren't inserted into a list.
- Fixed: FCanvasTextureInfo::Viewpoint needed a read barrier, and the whole
list should serve as a root.
- Reimplemented SPC playback as a custom codec for FMOD.
- Removed spc_frequency, because snes_spc only supports the SPC's native
frequency of 32000 Hz.
SVN r806 (trunk)
drawing function. The most improvement came from being able to turn some
constant variables into immediate values with self-modifying code, but I
also managed to reorder it to make it a little faster. It's about 9% faster
than VC++'s code and 19% faster than GCC's code. That's not a huge
improvement (for VC++), but at least it's measurable.
- Removed the solid fill "optimization" from rt_shaded4cols(), because in my
testing, it didn't help any and in fact, hurt just a little bit.
- In the name of simplification, all the rt_tlate* drawers were changed to do
the translation in one step and the drawing in another. This lets me call
the untranslated drawer to do the real drawing instead of mostly duplicating
them. Performance wise, there is practically no difference from before.
SVN r771 (trunk)
- Added .txt files to the list of types (wad, zip, and pk3) that can be
loaded without listing them after -file.
- Fonts that are created by the ACS setfont command to wrap a texture now
support animated textures.
- FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn
with the hardware 2D path instead of being restricted to the game palette.
- Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1
on a Radeon 9000.
- Added back the off-by-one palette handling, but in a much more limited
scope than before. The skipped entry is assumed to always be at 248, and
it is assumed that all Shader Model 1.4 cards suffer from this. That's
because all SM1.4 cards are based on variants of the ATI R200 core, and the
RV250 in a Radeon 9000 craps up like this. I see no reason to assume that
other flavors of the R200 are any different. (Interesting note: With the
Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the
debug Direct3D 9 runtime, but it works perfectly fine with the retail
Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its
math inside pixel shaders. That would explain perfectly why I can't use
constants greater than 1 with PS1.4 and why it can't do an exact mapping to
every entry in the color palette.
- Fixed: The software shaded drawer did not work for 2D, because its selected
"color"map was replaced with the identitymap before being used.
- Fixed: I cannot use Printf to output messages before the framebuffer was
completely setup, meaning that Shader Model 1.4 cards could not change
resolution.
- I have decided to let remap palettes specify variable alpha values for
their colors. D3DFB no longer forces them to 255.
- Updated re2c to version 0.12.3.
- Fixed: A_Wander used threshold as a timer, when it should have used
reactiontime.
- Fixed: A_CustomRailgun would not fire at all for actors without a target
when the aim parameter was disabled.
- Made the warp command work in multiplayer, again courtesy of Karate Chris.
- Fixed: Trying to spawn a bot while not in a game made for a crashing time.
(Patch courtesy of Karate Chris.)
- Removed some floating point math from hu_scores.cpp that somebody's GCC
gave warnings for (not mine, though).
- Fixed: The SBarInfo drawbar command crashed if the sprite image was
unavailable.
- Fixed: FString::operator=(const char *) did not release its old buffer when
being assigned to the null string.
- The scanner no longer has an upper limit on the length of strings it
accepts, though short strings will be faster than long ones.
- Moved all the text scanning functions into a class. Mainly, this means that
multiple script scanner states can be stored without being forced to do so
recursively. I think I might be taking advantage of that in the near
future. Possibly. Maybe.
- Removed some potential buffer overflows from the decal parser.
- Applied Blzut3's SBARINFO update #9:
* Fixed: When using even length values in drawnumber it would cap to a 98
value instead of a 99 as intended.
* The SBarInfo parser can now accept negatives for coordinates. This
doesn't allow much right now, but later I plan to add better fullscreen
hud support in which the negatives will be more useful. This also cleans
up the source a bit since all calls for (x, y) coordinates are with the
function getCoordinates().
- Added support for stencilling actors.
- Added support for non-black colors specified with DTA_ColorOverlay to the
software renderer.
- Fixed: The inverse, gold, red, and green fixed colormaps each allocated
space for 32 different colormaps, even though each only used the first one.
- Added two new blending flags to make reverse subtract blending more useful:
STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that
gets blended with the background, since that seems like a good idea for
reverse subtraction. They also work with the other two blending operations.
- Added subtract and reverse subtract blending operations to the renderer.
Since the ERenderStyle enumeration was getting rather unwieldy, I converted
it into a new FRenderStyle structure that lets each parameter of the
blending equation be set separately. This simplified the set up for the
blend quite a bit, and it means a number of new combinations are available
by setting the parameters properly.
SVN r710 (trunk)
- Moved the common code of ACS and DECORATE translation generation into the
FRemapTable class.
- Fixed: The DECORATE translation code was not changed for the new data structures.
- Expanded range of ACS and DECORATE translations to 65535.
- Fixed: R_CopyTranslation was not altered for the new functionality.
I removed the function and replaced the one use with a simple assignment.
SVN r644 (trunk)
palettes smaller than 256 entries with the shader I wrote for it. Is there
a list of gotchas like this listed some where? I'd really like to see it.
Well, when compiled with SM2.0, the PalTex shader seems to be every-so-
slightly faster on my GF7950GT than the SM1.4 version, so I guess it's a
minor win for cards that support it.
- Fixed: ST_Endoom() failed to free the bitmap it used.
- Added the DTA_ColorOverlay attribute to blend a color with the texture
being drawn. For software, this (currently) only works with black. For
hardware, it works with any color. The motiviation for this was so I could
rewrite the status bar calls that passed DIM_MAP to DTA_Translation to
draw darker icons into something that didn't require making a whole new
remap table.
- After having an "OMG! How could I have been so stupid?" moment, I have
removed the off-by-one check from D3DFB. I had thought the off-by-one error
was caused by rounding errors by the shader hardware. Not so. Rather, I
wasn't sampling what I thought I was sampling. A texture that uses palette
index 255 passes the value 1.0 to the shader. The shader needs to adjust the
range of its palette indexes, or it will end up trying to read color 256
from the palette texture when it should be reading color 255. Doh!
- The TranslationToTable() function has been added to map from translation
numbers used by actors to the tables those numbers represent. This function
performs validation for the input and returns NULL if the input value
is invalid.
- Major changes to the way translation tables work: No longer are they each a
256-byte array. Instead, the FRemapTable structure is used to represent each
one. It includes a remap array for the software renderer, a palette array
for a hardware renderer, and a native texture pointer for D3DFB. The
translationtables array itself is now an array of TArrays that point to the
real tables. The DTA_Translation attribute must also be passed a pointer
to a FRemapTable, not a byte array as previously.
- Modified DFrameBuffer::DrawRateStuff() so that it can do its thing properly
for D3DFB's 2D mode. Before, any fullscreen graphics (like help images)
covered it up.
SVN r640 (trunk)
- Added a new color parameter to DCanvas::Clear() that specifies the
ARGB value of the color. This is used if the old color parameter,
which specifies a palette entry, is -1.
SVN r617 (trunk)
- Fixed: Resurrecting a player must restore all flags words, not just the first one.
- Fixed: APowerWeaponLevel2::EndEffect must check PendingWeapon for WP_NOCHANGE.
- added Skulltag's high jump rune as a powerup
- Added Skulltag's Drain and Regeneration runes as powerups and used specific player
sounds for their sound effects instead of using misc/i_pkup.
(If I ever decide to implement runes it will be in a way that can use the regular
powerups instead of having to define specific classes for them.)
- Added Skulltag's PowerQuadDamage and PowerQuarterDamage as more customizable
PowerDamage and PowerProtection. These new powerups allow free customization of
the damage modification per damage type by inheriting from these classes and
setting specific values. Such derived damage/protection powerups will be considered
as separate powers so that for example a QuadDamage and a DoubleDamage item can be
stacked which would result in 8x damage.
- merged player_t::cheats and player_t::Powers into one variable.
SVN r529 (trunk)
from the renderer in case the camera changed position or direction since
the last time it was looked through. Otherwise, the renderer will
interpolate from its previous view for one frame when it is switched to.
- Fixed non-POD parameter passing for GCC introduced in the previous commit.
SVN r476 (trunk)
- Fixed: The PlayerSpeedTrail must copy the player's scaling information
(from Skulltag)
- Added r_maxparticles CVAR from Skulltag.
- Changed PCX loader so that it always loads the last 768 bytes of 8 bit graphics as a palette
SVN r447 (trunk)
be surprised if it doesn't work.
- Reorganized the network startup loops so now they are event driven. There is
a single function that gets called to drive it, and it uses callbacks to
perform the different stages of the synchronization. This lets me have a nice,
responsive abort button instead of the previous unannounced hit-escape-to-
abort behavior, and I think the rearranged code is slightly easier to
understand too.
- Increased the number of bytes for version info during D_ArbitrateNetStart(),
in preparation for the day when NETGAMEVERSION requires more than one byte.
- I noticed an issue with Vista RC1 and the new fatal error setup. Even after
releasing a DirectDraw or Direct3D interface, the DWM can still use the
last image drawn using them when it composites the window. It doesn't always
do it but it does often enough that it is a real problem. At this point, I
don't know if it's a problem with the release version of Vista or not.
After messing around, I discovered the problem was caused by ~Win32Video()
hiding the window and then having it immediately shown soon after. The DWM
kept an image of the window to do the transition effect with, and then when
it didn't get a chance to do the transition, it didn't properly forget about
its saved image and kept plastering it on top of everything else
underneath.
- Added a network synchronization panel to the window during netgame startup.
- Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL.
Otherwise, classic DECORATE definitions generate a big, fat crash.
- Resurrected the R_Init progress bar, now as a standard Windows control.
- Removed the sound failure dialog. The FMOD setup already defaulted to no
sound if initialization failed, so this only applies when snd_output is set
to "alternate" which now also falls back to no sound. In addition, it wasn't
working right, and I didn't feel like fixing it for the probably 0% of users
it affected.
- Fixed: The edit control used for logging output added text in reverse order
on Win9x.
- Went back to the roots and made graphics initialization one of the last
things to happen during setup. Now the startup text is visible again. More
importantly, the main window is no longer created invisible, which seems
to cause trouble with it not always appearing in the taskbar. The fatal
error dialog is now also embedded in the main window instead of being a
separate modal dialog, so you can play with the log window to see any
problems that might be reported there.
Rather than completely restoring the original startup order, I tried to
keep things as close to the way they were with early graphics startup. In
particular, V_Init() now creates a dummy screen so that things that need
screen dimensions can get them. It gets replaced by the real screen later
in I_InitGraphics(). Will need to check this under Linux to make sure it
didn't cause any problems there.
- Removed the following stubs that just called functions in Video:
- I_StartModeIterator()
- I_NextMode()
- I_DisplayType()
I_FullscreenChanged() was also removed, and a new fullscreen parameter
was added to IVideo::StartModeIterator(), since that's all it controlled.
- Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's
initialized post-1.22.
SVN r416 (trunk)
explaining the need to use mt.exe 6.0 or newer. Here is the note:
VERY IMPORTANT: You must copy the mt.exe from %VSINSTALLDIR%\Common7\Tools\bin
on top of the version in %VSINSTALLDIR%\VC\bin or your computer may restart
while building.
- Changed the ASecretTrigger::Activate() fix: There's no reason open scripts
shouldn't be able to activate secret triggers; players just won't get
credit for it in coop.
- Added a NULL actor check to R_SetupFrame().
- Fixed: The player sounds in DEHSUPP were defined incorrectly.
SVN r390 (trunk)
affected by armor.
- Added an unfreeze CCMD so that frozen players can be unfrozen for testing.
- Added special death states for projectiles hitting actors.
- Added ACS SetActorPitch/GetActorPitch functions.
- Added cameraheight property for actors.
SVN r359 (trunk)
- The stat meters now return an FString instead of sprintfing into a fixed
output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
- For consistancy with the other integral types, byte is no longer a
synonym for BYTE.
- Most uses of BOOL have been change to the standard C++ bool type. Those
that weren't were changed to INTBOOL to indicate they may contain values
other than 0 or 1 but are still used as a boolean.
- Compiler-provided types with explicit bit sizes are now used. In
particular, DWORD is no longer a long so it will work with both 64-bit
Windows and Linux.
- Since some files need to include Windows headers, uint32 is a synonym
for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
was all it contained.
SVN r326 (trunk)
and aren't limited to the script's activator.
- Added GetSectorLightLevel(tag), GetActorCeilingZ(tid) and
SetActorPosition(tid, x, y, z, fog) ACS functions.
- Fixed: First initialization of camera textures should not mark the rendered
lines as mapped.
SVN r198 (trunk)
a crash report indicating that an actor being pushed up by a moving floor
had a NULL sector. Since this field should be valid for every actor, the
debug build gets an assert here, and the release build just returns without
doing anything.
- Fixed: Camera textures were not rendered properly when the underlying
canvas's pitch and width were different (which, really, only happens if
you use ridiculously large camera textures).
- Fixed: FCanvasTextureInfo's were never freed.
- Fixed: MAPINFO special action structures were not freed.
- Fixed: FSingleLumpFont::LoadFON2() never freed its widths2 array.
SVN r129 (trunk)
* Animations are now millisecond-accurate, so delays in ANIMDEFS can have
fractional parts.
* Cleaned up the animation code and moved it into r_anim.cpp.
* Blood's oscillating texture animations are now available for use by actual
supported games by adding the word "oscillate" after a "range" definition
in ANIMDEFS.
* Not exactly texture animation, but it's handled in the same function as
texture animations: Scrolling skies also have millisecond precision.
SVN r125 (trunk)
functions added to the exit chain with atterm so that they can be called
in a deterministic order and not whatever order the linker decides to put
them in.
- Fixed: DCajunMaster did not free its getspawned.
- Fixed: P_FreeLevelData() did not free ACS scripts.
- Fixed: Level snapshots were not freed at exit.
- Fixed: The save/load menu list was not freed at exit.
- Fixed: FCompressedMemFile needs a destructor to free the m_ImplodedBuffer.
- Fixed: G_DoLoadGame() did not free the engine string.
- Fixed: M_ReadSaveStrings() did not free the engine string.
- Fixed: Processing DEM_SAVEGAME did not free the pathname string.
- Added a check for truncated flats to FFlatTexture::MakeTexture() because
Heretic's F_SKY1 is only four bytes long.
- Added a dump of the offending state to the "Cannot find state..." diagnostic.
- Fixed: FCompressedFile did not initialize m_Mode in its default constructor.
- Fixed: Heretic and Hexen status bars did not initialize ArtiRefresh.
- Fixed: PNGHandle destructor should use delete[] to free TextChunks.
SVN r111 (trunk)
- Removed doom.x, heretic.x and strife.x from the SVN repository. These
are generated files.
- Fixed: A_PainDie has to check whether a valid target exists before
calling IsFriend.
- Fixed: FDecalLib::FindAnimator needs a signed counter to work properly.
May 1, 2006 (Changes by Graf Zahl)
- Added support for game specific pickup messages, if only to be able
to define Raven's invulnerability item in DECORATE.
- Removed A_TreeDeath because it is no longer used.
- Fixed: When picking up a PowerupGiver for an active powerup the
blend color and the duration were transferred to a temorary item
and never took effect. They have to be trnasferred to the newly created
powerup item before trying to give it to the player, not afterward.
- Made the colormap of the InvulnerabilitySphere item specific.
The base power class still needs to have its color adjusted
per game though and since Raven's invulnerability item is used in both
Hexen and Heretic it can't define its own colormap/blend.
- Separated the invulnerability colormaps from the game being played
and made them item specific. They can also be specified as regular
blend colors in DECORATE now.
- Converted a_hereticarmor.cpp and most of a_doomartifacts.cpp,
a_hereticartifacts.cpp and a_heretickeys.cpp to DECORATE.
- Changed the Soulsphere to be a real health item with the Dehacked
modifications made in d_dehacked.cpp as for most other items which
need to be adjusted.
- Added IF_BIGPOWERUP flag to AInventory to expose the RESPAWN_SUPER
dmflag to DECORATE. Also removed the now obsolete ShouldRespawn methods
from AInvulnerabilitySphere and ABlurSphere.
- Converted a_splashes.cpp to DECORATE.
- Converted most of a_debris.cpp to DECORATE.
SVN r73 (trunk)
returning from one function to another function when the function that
was called was used as part of an expression.
- Fixed: Using Thing_Hate with arg0 (hater) set to 0 from an open script
could crash.
- Fixed: Some items along ledges in Hexen's MAP32 (Orchard of Lamentations)
appeared at the bottom of the ledge (and consequently inside it) instead
of on top of it because the items were placed directly on the lines.
AActor::LinkToWorldForMapThing() needs to use the original R_PointOnLineSide()
code to handle situations like this. Previously, it just used the original
code for straight horizontal/vertical lines and used the new code for
diagonal lines.
- Fixed: FWadCollection::MergeLumps() used in incorrect realloc.
- Fixed: FPlayList::NextLine() did not properly handle blank lines in the
playlist.
- Changed: Decals now use lightweight thinkers instead of actors. (76 bytes
versus 396, so you save 320k if you have 1024 decals present.)
- Fixed: Wads added with pullin were loaded immediately after the IWAD.
Exec files are now processed immediately before -file but after autoloading
wads in D_DoomMain().
- Fixed: sdl/i_system.h unconditionally defined SHARE_DIR, preventing
redefinition from the command line.
- Fixed: The standard way to include SDL.h is <SDL.h>, not <SDL/SDL.h>.
- Fixed: Returned FActiveInterpolation::HashKey()'s return type to size_t,
avoiding a pointer truncation warning.
SVN r30 (trunk)
