* OPL: specify the core to use for playing this song
* FluidSynth: specify a soundfont that should be used for playing the song.
* WildMidi: specify a config file that should be used for playing the song.
* Timidity++: specify an executable that should be used for playing the song. At least under Windows this allows using Timidity++ with different configs if the executable and each single config are placed in different directories.
* GUS: currently not operational, but should later also specify the config. This will need some work, because right now this is initialized only when the sound system is initialized.
* all other: no function.
These options should mainly be for end users who want to fine-tune how to play the music.
is supposed to be canceled by sysex events and meta events. This confused FMOD when the
resulting song used used running status right after these events.
SVN r3803 (trunk)
degree of support for songs that use loop controllers to loop the song back to a point after
the very beginning of the song.
- Enable loops during SMF generation. Infinite loops will be clamped to some finite amount. (This is currently 30, so a 3 minute song will still restart from the very beginning after 90 minutes)
- Fixed: The SMF, HMI, and XMI readers all generated invalid MEVT_NOP events.
- Fixed: SMF generation died on songs that set their tempo during the initial beat.
SVN r2864 (trunk)
- Added a generic Standard MIDI File creator that works with any of the sequencers. mus2midi.cpp
is no longer used but is kept around as a reference.
SVN r2677 (trunk)
- Moved MIDI precaching logic into MIDIStreamer so that SMF and HMI files can both use the
same implementation.
- Added a player for HMI midi files.
SVN r2675 (trunk)
to try compiling it myself on Windows to see if it's really that slow or if
Ubuntu just ships an unoptimized version, because performance is pretty pathetic
when compared to the other options. (I understand that it's a complete SoundFont2
renderer, so it is understandably slower than something like TiMidity++, but still.
Does it really need to be around 10x slower? I played with the chorus, reverb, and
interpolation settings, and none of them seemed to make much difference in
performance.)
SVN r2545 (trunk)
wave file.
- Changed the default channel velocity for MUS files from 64 to 100 to
better match apparent MIDI practice. (Would like to know what this is
supposed to be.)
- Changed the mus2midi channel assignments to match the internal player's.
- Fixed: apply_envelope_to_amp() should clamp the mix levels to 0.
SVN r926 (trunk)
timidity_voices cvar.
- Added stats lines for the OPL and Timidity MIDI devices.
- Completely changed the way TiMidity volume calculations are done. It
should now be extremely close to the output a real GUS would produce with
its official MIDI player (excepting where TiMidity normalizes sample
volumes). The new equations more closely match what is specified by the DLS
and SF2 specs (but not quite), so I presume it's also more musically
correct than what TiMidity (and TiMidity++) do.
SVN r925 (trunk)
- Set note velocity back to using a linear sounding volume curve, although
it's now used to scale channel volume and expression, so recompute_amp()
is still only doing one volume curve lookup.
- Fixed: TimidityMIDIDevice caused a crash at the end of a non-looping song.
SVN r920 (trunk)
because it has the same sound volume issues as the external one.
- Replaced use of stdio in Timidity with FileReader and added the option to read
from the lump directory. If the main config file is inside the lump directory
it will assume that everything else is as well. If it is a real file it will be
assumed that the rest is real files as well.
- Fixed: None of the error returns in Timidity::read_config_file closed the file being read.
SVN r906 (trunk)
particular, this meant that every channel was almost certainly in mono mode,
which can sound pretty bad if the song isn't meant to be played that way.
- Added bank numbers to the MIDI precaching for Timidity, since I guess I do
need to care about banks, if even the Duke MIDIs use various banks.
- Fixed: snd_midiprecache only exists in Win32 builds, so gameconfigfile.cpp
shouldn't unconditionally link against it.
- Fixed: pre_resample() was still disabled, and it left two samples at the end
of the new wave data uninitialized.
SVN r903 (trunk)
channel when restarting the song, rather than emitting a single note off
event which only has a 1 in 127 chance of being for a note that's playing
on that channel. Then I decided it would probably be a good idea to reset
all the controllers as well.
- Increasing the size of the internal Timidity stream buffer from 1/14 sec
(copied from the OPL player) improved its sound dramatically, so apparently
Timidity has issues with short stream buffers. It's now at 1/2 sec in
length. However, there seems to be something weird going on with
corazonazul_ff6boss.mid near the beginning where it stops and immediately
restarts a guitar on the exact same note.
- Added a new sound debugging cvar: snd_drawoutput, which can show various
oscilloscopes and spectrums.
- Internal TiMidity now plays music.
- Changed the progdir global variable into an FString.
SVN r900 (trunk)
can be played as OPL can also be dumped.
- Removed the opl_enable cvar, since OPL playback is now selectable as just
another MIDI device.
- Added support for DRO playback and dual-chip RAW playback.
- Removed MUS support from OPLMUSSong, since using the OPLMIDIDevice with
MUSSong2 works just as well. There are still lots of leftover bits in
the class that should probably be removed at some point, too.
- Added dual-chip dumping support for the RAW format.
- Added DosBox Raw OPL (.DRO) dumping support. For whatever reason,
in_adlib calculates the song length for this format wrong, even though
the exact length is stored right in the header. (But in_adlib seems buggy
in general; too bad it's the only Windows version of Adplug that seems to
exist.)
- Rewrote the OPL dumper to work with MIDI as well as MUS.
SVN r872 (trunk)
advanced sound options menu. Removed opl_enable from the menu.
- Added OPL synth as MIDI device -3. Since this is based on the MUS player
code, it only supports those events and controllers supported by MUS.
Some of Duke's MIDIs sound awful, but I think that may be more because
it's using different instruments... There's a thread in the MIDI streamer
class that could be taken out for Linux, since it doesn't need to deal
with the Windows Multimedia API, but for now, this is still Windows-only.
SVN r864 (trunk)
into a general MIDI player.
- Fixed: Passing false for a stream callback did not stop the stream.
- Removed opl_frequency, since the only time the emulation sounds good is
when it plays at the exact frequency of a real chip.
- Music no longer plays at all when snd_musicvolume is 0.
- Bumped up snd_sfxvolume and snd_musicvolume default values.
SVN r862 (trunk)
contain enough music to fill the initial output buffers.
- Removed the read barrier around ADehackedPickup::RealPickup. If the real
pickup is picked up, it may very well destroy itself before the dehacked
wrapper's stubs that use it are called.
- Reverted revision 840. For a file we don't want end users to be touching,
making DEHSUPP plain text sends out mixed messages: "Don't mess with this.
Oh, by the way, it's plain text now to make it easier for you to edit."
Is there some reason other than a desire to do away with binary lumps to
make the distributed lump text?
- Added a new speakermode for Stereo + HRTF: "Headphones". This is the only
way to get the HRTF low pass filter effect now.
- Fixed: No more than one sector could make noise at once.
- Trying out sound without varying priorities again.
- Fixed: Need to use setSpeakerMix to let 2D sounds (aka streamed music) use
their full volume range.
SVN r842 (trunk)
for FMOD Ex while at the same time removing support for FMOD 3. Be sure to update
your SDKs. GCC users, be sure to do a "make cleandep && make clean" before
building, or you will likely get inexplicable errors.
- Fixed: If you wanted to make cleandep with MinGW, you had to specifically
specify Makefile.mingw as the makefile to use.
- Added a normalizer to the OPL synth. It helped bring up the volume a little,
but not nearly as much as I would have liked.
- Removed MIDI Mapper references. It doesn't work with the stream API, and
it doesn't really exist on NT kernels, either.
- Reworked music volume: Except for MIDI, all music volume is controlled
through GSnd and not at the individual song level.
- Removed the mididevice global variable.
- Removed snd_midivolume. Now that all music uses a linear volume scale,
there's no need for two separate music volume controls.
- Increased snd_samplerate default up to 48000.
- Added snd_format, defaulting to "PCM-16".
- Added snd_speakermode, defaulting to "Auto".
- Replaced snd_fpu with snd_resampler, defaulting to "Linear".
- Bumped the snd_channels default up from a pitiful 12 to 32.
- Changed snd_3d default to true. The new cvar snd_hw3d determines if
hardware 3D support is used and default to false.
- Removed the libFLAC source, since FMOD Ex has native FLAC support.
- Removed the altsound code, since it was terribly gimped in comparison to
the FMOD code. It's original purpose was to have been as a springboard for
writing a non-FMOD sound system for Unix-y systems, but that never
happened.
- Finished preliminary FMOD Ex support.
SVN r789 (trunk)
