- G_DoSaveGame() now receives the filename and description from its arguments
rather than global variables, so autosaves and manual saves can be done
in close proximity to each other without overwriting the parameters for
one of them.
- Fixed potential buffer overrun in G_SaveGame() and added a check so that
you can't interfere with saves that are still pending.
- Fixed: P_LineAttack() creates temporary puffs to get damage types, but this
had the side effect of creating particles for the puff.
- Fixed: The Heretic status bar tried to use the graphic "SELECTBOX" for the
inventory selector. The correct name is "SELECTBO".
- Fixed: Using allowrespawn for a single-player map would fire off enter
scripts instead of respawn script because the player wasn't assigned the
state PST_REBORN.
- Fixed: P_CheckMissileSpawn() now passes the BlockingMobj to
P_ExplodeMissile() so that it can select the appropriate death state.
- Added the manifest to MinGW-compiled builds of updaterevision so you can
build under Vista with MinGW without needing administrative privileges.
(But I still want to know why Vista thinks it needs elevated privileges
without a manifest telling it otherwise.)
- Using four 0xFF bytes for the final note of an IMF song should signal the
end of the song.
SVN r733 (trunk)
- Bumped the maximum resolution up to 2560x1600.
- Fixed: DCanvas::DrawTexture() only expanded virtual screen sizes for widescreen
resolutions but left 5:4 modes alone. This fix neccessitated the addition of
DTA_Bottom320x200 for the status bar to use so that it could be flush with the
bottom of the screen rather than sitting slightly above it.
- Fixed: FConfigFile::ReadConfig()'s definition of whitespace was too broad.
- Fixed: Defining custom translation ranges in descending order and/or with gaps
made for crashes.
SVN r676 (trunk)
R_InitPatches. This isn't needed anymore because all these are loaded through
an intermission script.
- Fixed: A_SpawnDebris read the third and fourth arguments from the first one's
address.
SVN r664 (trunk)
palettes smaller than 256 entries with the shader I wrote for it. Is there
a list of gotchas like this listed some where? I'd really like to see it.
Well, when compiled with SM2.0, the PalTex shader seems to be every-so-
slightly faster on my GF7950GT than the SM1.4 version, so I guess it's a
minor win for cards that support it.
- Fixed: ST_Endoom() failed to free the bitmap it used.
- Added the DTA_ColorOverlay attribute to blend a color with the texture
being drawn. For software, this (currently) only works with black. For
hardware, it works with any color. The motiviation for this was so I could
rewrite the status bar calls that passed DIM_MAP to DTA_Translation to
draw darker icons into something that didn't require making a whole new
remap table.
- After having an "OMG! How could I have been so stupid?" moment, I have
removed the off-by-one check from D3DFB. I had thought the off-by-one error
was caused by rounding errors by the shader hardware. Not so. Rather, I
wasn't sampling what I thought I was sampling. A texture that uses palette
index 255 passes the value 1.0 to the shader. The shader needs to adjust the
range of its palette indexes, or it will end up trying to read color 256
from the palette texture when it should be reading color 255. Doh!
- The TranslationToTable() function has been added to map from translation
numbers used by actors to the tables those numbers represent. This function
performs validation for the input and returns NULL if the input value
is invalid.
- Major changes to the way translation tables work: No longer are they each a
256-byte array. Instead, the FRemapTable structure is used to represent each
one. It includes a remap array for the software renderer, a palette array
for a hardware renderer, and a native texture pointer for D3DFB. The
translationtables array itself is now an array of TArrays that point to the
real tables. The DTA_Translation attribute must also be passed a pointer
to a FRemapTable, not a byte array as previously.
- Modified DFrameBuffer::DrawRateStuff() so that it can do its thing properly
for D3DFB's 2D mode. Before, any fullscreen graphics (like help images)
covered it up.
SVN r640 (trunk)
installation, not the bundled copies which might not match what is installed.
- Upgraded bundled FLAC from version 1.1.2 to version 1.2.1.
SVN r575 (trunk)
be surprised if it doesn't work.
- Reorganized the network startup loops so now they are event driven. There is
a single function that gets called to drive it, and it uses callbacks to
perform the different stages of the synchronization. This lets me have a nice,
responsive abort button instead of the previous unannounced hit-escape-to-
abort behavior, and I think the rearranged code is slightly easier to
understand too.
- Increased the number of bytes for version info during D_ArbitrateNetStart(),
in preparation for the day when NETGAMEVERSION requires more than one byte.
- I noticed an issue with Vista RC1 and the new fatal error setup. Even after
releasing a DirectDraw or Direct3D interface, the DWM can still use the
last image drawn using them when it composites the window. It doesn't always
do it but it does often enough that it is a real problem. At this point, I
don't know if it's a problem with the release version of Vista or not.
After messing around, I discovered the problem was caused by ~Win32Video()
hiding the window and then having it immediately shown soon after. The DWM
kept an image of the window to do the transition effect with, and then when
it didn't get a chance to do the transition, it didn't properly forget about
its saved image and kept plastering it on top of everything else
underneath.
- Added a network synchronization panel to the window during netgame startup.
- Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL.
Otherwise, classic DECORATE definitions generate a big, fat crash.
- Resurrected the R_Init progress bar, now as a standard Windows control.
- Removed the sound failure dialog. The FMOD setup already defaulted to no
sound if initialization failed, so this only applies when snd_output is set
to "alternate" which now also falls back to no sound. In addition, it wasn't
working right, and I didn't feel like fixing it for the probably 0% of users
it affected.
- Fixed: The edit control used for logging output added text in reverse order
on Win9x.
- Went back to the roots and made graphics initialization one of the last
things to happen during setup. Now the startup text is visible again. More
importantly, the main window is no longer created invisible, which seems
to cause trouble with it not always appearing in the taskbar. The fatal
error dialog is now also embedded in the main window instead of being a
separate modal dialog, so you can play with the log window to see any
problems that might be reported there.
Rather than completely restoring the original startup order, I tried to
keep things as close to the way they were with early graphics startup. In
particular, V_Init() now creates a dummy screen so that things that need
screen dimensions can get them. It gets replaced by the real screen later
in I_InitGraphics(). Will need to check this under Linux to make sure it
didn't cause any problems there.
- Removed the following stubs that just called functions in Video:
- I_StartModeIterator()
- I_NextMode()
- I_DisplayType()
I_FullscreenChanged() was also removed, and a new fullscreen parameter
was added to IVideo::StartModeIterator(), since that's all it controlled.
- Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's
initialized post-1.22.
SVN r416 (trunk)
monsters
- Added velocity multiplicators to A_SpawnDebris.
- Changed: A_JumpIfNoAmmo should have no effect for CustomInventory items.
- Fixed: DECORATE jump commands must set the call state's result to 0
even when they have to return prematurely.
- Added obituaries for Strife's and Hexen's monsters.
- Converted Strife's Bishop to DECORATE.
- Added momx, momy and momz variables to the DECORATE expression evaluator.
SVN r404 (trunk)
- Added integer constant declarations to objects.
- Added some new token-based functions to sc_man.cpp that know about keywords
and record proper type information, so parsers don't need to treat
everything as strings.
- Added a simple symbol table to PClass.
SVN r394 (trunk)
- Made the Ettin's and Centaur's howling sound an actor property.
- Added A_CustomComboAttack function to finally have something that can
replace the old A_ComboAttack function.
- Added A_SpawnItemEx function that removes the problems with A_SpawnItem
and which also should make most of the A_CustomMissile abuse unnecessary.
- Added A_QueueCorpse to the list of DECORATE code pointers.
- Made the size of Hexen's corpse queue configurable by CVAR
(sv_corpsequeuesize.) Setting this CVAR to -1 will disable corpse
queuing completely so that even in Hexen all corpses will stay forever.
SVN r392 (trunk)
explaining the need to use mt.exe 6.0 or newer. Here is the note:
VERY IMPORTANT: You must copy the mt.exe from %VSINSTALLDIR%\Common7\Tools\bin
on top of the version in %VSINSTALLDIR%\VC\bin or your computer may restart
while building.
- Changed the ASecretTrigger::Activate() fix: There's no reason open scripts
shouldn't be able to activate secret triggers; players just won't get
credit for it in coop.
- Added a NULL actor check to R_SetupFrame().
- Fixed: The player sounds in DEHSUPP were defined incorrectly.
SVN r390 (trunk)
the build process can run uninterrupted under Vista.
- Fixed: DIRECT3DCREATE9FUNC needs WINAPI added to its prototype so that it
works properly in release build, which defaults to __fastcall.
SVN r385 (trunk)
while and killing centaurs with the flechette.
- Fixed: Moving to an old level in a hub caused the old player's inventory to
spawn owned by the current player (but still hanging off the old player), so
the game would hang when trying to delete it.
- Modified re2c so that it doesn't add a date to the file it generates. Thus,
if it regenerates a file during a full rebuild, SVN won't see it as a change.
Also updated it to 0.10.5.
- Fixed: SC_GetString() did not properly terminate sc_String when the last
token in the file had no white space after it. Since I could not actually
find the problem (it works fine in debug mode and I saw no logic errors),
I decided to take this opportunity to reimplement it using an re2c-generated
scanner. Now it's 1.6x faster than before and correctness is easier to
verify.
- Fixed: FMODSoundRenderer::Shutdown() also needs to reset NumChannels.
- Added back the Manifest to zdoom.rc for non-VC8 Windows compilers.
- Fixed MinGW compilation again. Now it uses the same method as Makefile.linux
to find all the source files so that it doesn't need to be manually updated
each time source files are added or removed.
- Added the SVN revision number to the version string. A new tool is used to
obtain this information from the svnversion command and write it into a
header file. If you don't have the svn command line tools installed or didn't
check it out from the repository, you can still build. I added some rules for
this to Makefile.linux, and I assume they work because they do for
Makefile.mingw.
- Fixed: MIDISong2 did not delete MusHeader in its destructor.
SVN r200 (trunk)
