can share the same hardware texture. This greatly reduces the number of
DrawPrimitive calls that need to be made when drawing text (or any 2D
graphics in general), so now hardware text is much faster than software text
all around. (As an example, one scenario went from 315 fps to over 1635 fps
for hardware, compared to 540 fps for software.)
SVN r687 (trunk)
- Modified M_DrawFrame() and R_DrawTopBorder() so that they call FlatFill() to
draw the edges of the frames. This at least seems a bit faster for hardware
2D.
- Implemented FlatFill() for D3DFB. It seems to be exactly as fast as the
default implementation that just calls DrawTexture() to tile the pieces onto
the screen, so I'm not sure it was worth the bother.
SVN r686 (trunk)
vertex buffer, made line batching automatic, and added an index buffer for
use when batching quads. The index buffer actually offered more of a
performance boost than simply batching the quads alone did.
SVN r685 (trunk)
were not informed about which team they ended up joining.
- Added Skulltag's DF2_SAME_SPAWN_SPOT flags.
- Fixed: DF2_YES_DEGENERATION was pretty much guaranteed to go out of sync
because it used gametic for timing.
- Added DoubleAmmoFactor as a skill property for the DF2_YES_DOUBLEAMMO flag.
- Renumbered the dmflags2 entries to match Skulltag's again.
- Added Karate Chris's infinite ammo patch.
SVN r683 (trunk)
should bounce off of. Since the order lines in a blockmap cell are checked
for collision is essentially undefined, there could be another line closer to
the actor that it should bounce off of instead.
SVN r678 (trunk)
- Bumped the maximum resolution up to 2560x1600.
- Fixed: DCanvas::DrawTexture() only expanded virtual screen sizes for widescreen
resolutions but left 5:4 modes alone. This fix neccessitated the addition of
DTA_Bottom320x200 for the status bar to use so that it could be flush with the
bottom of the screen rather than sitting slightly above it.
- Fixed: FConfigFile::ReadConfig()'s definition of whitespace was too broad.
- Fixed: Defining custom translation ranges in descending order and/or with gaps
made for crashes.
SVN r676 (trunk)
- Fixed: Playerclass still didn't work due to comparing of improper numbers.
- Fixed: The arrows on drawinventorybar had a hard coded location instead of
relative to the specified coordinates.
- Added noarrows flag to drawinventorybar to remove the blue arrows drawn when
there are more items to the left or right of the viewable bar.
- Added forcescaled flag to the statusbar command. This is ignored on the
inventory and inventoryfullscreen types.
- Added obituary fix for Strife peasants by Karate Chris.
- Added fix for loading during demo playback by Karate Chris.
SVN r672 (trunk)
players are on teams.
- Set TEAM_None back to 255. Since a player's team has already been accessible
through ACS, needlessly redefining this is a bad thing to do, since it can
break existing maps. 255 different teams should still be more than enough.
- Fixed: At certain resolutions, there was a one pixel row between the status
bar and the rest of the screen, thanks to rounding error.
- Added automatic batching of quads to D3DFB. Screens with a lot of text are
ever-so-slightly faster now, though still only about half the speed of
sofware-only text. I suppose the only way to see a marked improvement is
going to be by stuffing multiple glyphs in a single texture.
- Fixed: Crosshairgrow's animation was not framerate-independent.
SVN r668 (trunk)
an arbitrarily defined value. This reduces the amount of relevant values
that have to be defined in version.h to 1 (the minimum compatible savegame
version) instead of previously 3.
SVN r666 (trunk)
local variable just before returning. Then I made some more changes so that
it can be a properly functioning texture. After doing that, I decided to
rewrite the texture generation to be easier for me to read and hopefully
faster, since this thing is getting generated every frame. (Please don't
hurt me if I got it wrong. I'm basing this on the description in the wiki,
since I couldn't wrap my head around what the code was doing by looking
at it.) Then I realized that there's really no reason to have more than four
of these ever, and they can be statically generated, so I simplified it some
more.
- Added Blzut3's latest SBARINFO patch:
* Fixed a massive memory leak in SBARINFO. The leak also lead to progressive
CPU usage.
* Fixed: Playerclass didn't work in SBARINFO.
* Fixed: Artiflash was improperly initialized causing it not to display the
first time.
* Changed the variable SBarInfoScript to be a pointer to prevent more memory
leaks.
SVN r665 (trunk)
R_InitPatches. This isn't needed anymore because all these are loaded through
an intermission script.
- Fixed: A_SpawnDebris read the third and fourth arguments from the first one's
address.
SVN r664 (trunk)
and into the vertex data.
- Added functions for doing line drawing with Direct3D, including a new pair
of functions to do batched line drawing so that the map can actually be
drawn faster in hardware than in software (instead of an order of magnitude
slower).
SVN r663 (trunk)
shader seems to be producing crappy output, so it's disabled for now.
Specifically, it produces distorted output at regular intervals for
textures that aren't power-of-2-sized, and it's still doing visible
filtering when the texture is rendered at its original size, so
obviously it's not doing something right.
- Fixed the use of power-of-2-sized native textures for smaller game
textures again.
- Fixed: D3DFB did not restore all the state it needed to after resetting
the device.
- Fixed: R_DrawTopBorder() must clip itself around the 3D view, since it's
now drawn later.
- With full software rendering, palette flashes once again effect the whole
screen.
Changes I neglected to put in the previous commit log:
- Moved the view border drawing into the 2D mode part. When using Begin2D()
now, the only part of the software buffer that gets updated to the screen
is the part with the actual 3D scene and only if you tell it to.
- Fixed a D3D memory leak on every frame in windowed mode and the same thing
for the screen wipes. Note to self: If it's an interface, be sure to
Release it, because it will be AddRef'ed before being returned to you.
- Moved the BlendView() call out of FBaseStatusBar::Draw() so that it can be
applied before copying the 3D scene to the screen underneath the 2D parts.
- Restored the console's darkening level to its old table-based amount.
- Fixed D3DFB::SetColorOverlay()'s incorrect calculations.
- Fixed the D3D screen wipes for letterboxed modes.
SVN r662 (trunk)
since I couldn't think of any reason why it should be grabbed at any other
time. (This only applies to windowed mode, where it makes sense to let the
OS have control of the pointer.)
SVN r661 (trunk)
a long-abandoned experiment to write directly to video memory instead of
to a temporary buffer in system meroy.
- Added Direct3D versions of the melt and burn screenwipes.
- Fixed the strip sizes for the melt screenwipe to match what Doom would have
produced on a 320x200 screen, rather than producing more, thinner strips
for wider screens.
SVN r659 (trunk)
8 characters which contain path separators.
- Fixed: Hires texture replacement must replace all matching textures, not
just the first one found. This is particularly important for icons based
on sprites.
- added a con_alpha CVAR to set the console's translucency.
- Added MartinHowe's submission for A_CustomBulletAttack aimfacing parameter.
- Added MartinHowe's submission for A_PlaySoundEx attenuation parameter.
- Fixed: Bots shouldn't target friendly monsters.
- Fixed a typo in sbarinfo.cpp (noatribox instead of noartibox.)
SVN r654 (trunk)
allocated. (I wonder if D3D actually handles this automatically when you use
D3DPOOL_MANAGED, because I'm pretty sure my laptops's x300 doesn't support
non-power-of-2 texture sizes, yet it worked just fine before.)
- Fixed vertical positioning of 2D elements in letterboxed modes.
SVN r653 (trunk)
very bright title pics it became quite hard to read the console's contents.
- Fixed: PROP_Translation needed to be changed for the new value format.
- Added GZDoom's MAPINFO fog parameters as no op dummies so I can use
WADs that contain them without constantly having to edit the MAPINFO.
It also allows using them to optimize hardware fog for WADs that should
run with ZDoom as well.
SVN r649 (trunk)
drawn to a texture, then that texture is copied to the real back buffer
using a gamma-correcting pixel shader. In fullscreen mode, SetGammaRamp
is used.
- Fixed flashing of vid_fps display when fps > 1000.
- Fixed loading of RGB textures for native 2D mode.
- Changed the first rotozoomer's data because it just became too obvious when
the backdrop is drawn with a full 256 distinct colors available.
- Set the player backdrop to update no more frequently than 35 FPS, so opening
the player setup menu before starting a game won't produce a very fast
moving backdrop.
- Changed the player backdrop into a texture so that it can be drawn like
anything else.
SVN r648 (trunk)
- Moved the common code of ACS and DECORATE translation generation into the
FRemapTable class.
- Fixed: The DECORATE translation code was not changed for the new data structures.
- Expanded range of ACS and DECORATE translations to 65535.
- Fixed: R_CopyTranslation was not altered for the new functionality.
I removed the function and replaced the one use with a simple assignment.
SVN r644 (trunk)
palettes smaller than 256 entries with the shader I wrote for it. Is there
a list of gotchas like this listed some where? I'd really like to see it.
Well, when compiled with SM2.0, the PalTex shader seems to be every-so-
slightly faster on my GF7950GT than the SM1.4 version, so I guess it's a
minor win for cards that support it.
- Fixed: ST_Endoom() failed to free the bitmap it used.
- Added the DTA_ColorOverlay attribute to blend a color with the texture
being drawn. For software, this (currently) only works with black. For
hardware, it works with any color. The motiviation for this was so I could
rewrite the status bar calls that passed DIM_MAP to DTA_Translation to
draw darker icons into something that didn't require making a whole new
remap table.
- After having an "OMG! How could I have been so stupid?" moment, I have
removed the off-by-one check from D3DFB. I had thought the off-by-one error
was caused by rounding errors by the shader hardware. Not so. Rather, I
wasn't sampling what I thought I was sampling. A texture that uses palette
index 255 passes the value 1.0 to the shader. The shader needs to adjust the
range of its palette indexes, or it will end up trying to read color 256
from the palette texture when it should be reading color 255. Doh!
- The TranslationToTable() function has been added to map from translation
numbers used by actors to the tables those numbers represent. This function
performs validation for the input and returns NULL if the input value
is invalid.
- Major changes to the way translation tables work: No longer are they each a
256-byte array. Instead, the FRemapTable structure is used to represent each
one. It includes a remap array for the software renderer, a palette array
for a hardware renderer, and a native texture pointer for D3DFB. The
translationtables array itself is now an array of TArrays that point to the
real tables. The DTA_Translation attribute must also be passed a pointer
to a FRemapTable, not a byte array as previously.
- Modified DFrameBuffer::DrawRateStuff() so that it can do its thing properly
for D3DFB's 2D mode. Before, any fullscreen graphics (like help images)
covered it up.
SVN r640 (trunk)
actor's sector in the game engine code with it. This way there's a clear
distinction between renderer-specific and game-specific calls.
SVN r638 (trunk)
