vertex buffer, made line batching automatic, and added an index buffer for
use when batching quads. The index buffer actually offered more of a
performance boost than simply batching the quads alone did.
SVN r685 (trunk)
- Bumped the maximum resolution up to 2560x1600.
- Fixed: DCanvas::DrawTexture() only expanded virtual screen sizes for widescreen
resolutions but left 5:4 modes alone. This fix neccessitated the addition of
DTA_Bottom320x200 for the status bar to use so that it could be flush with the
bottom of the screen rather than sitting slightly above it.
- Fixed: FConfigFile::ReadConfig()'s definition of whitespace was too broad.
- Fixed: Defining custom translation ranges in descending order and/or with gaps
made for crashes.
SVN r676 (trunk)
and into the vertex data.
- Added functions for doing line drawing with Direct3D, including a new pair
of functions to do batched line drawing so that the map can actually be
drawn faster in hardware than in software (instead of an order of magnitude
slower).
SVN r663 (trunk)
shader seems to be producing crappy output, so it's disabled for now.
Specifically, it produces distorted output at regular intervals for
textures that aren't power-of-2-sized, and it's still doing visible
filtering when the texture is rendered at its original size, so
obviously it's not doing something right.
- Fixed the use of power-of-2-sized native textures for smaller game
textures again.
- Fixed: D3DFB did not restore all the state it needed to after resetting
the device.
- Fixed: R_DrawTopBorder() must clip itself around the 3D view, since it's
now drawn later.
- With full software rendering, palette flashes once again effect the whole
screen.
Changes I neglected to put in the previous commit log:
- Moved the view border drawing into the 2D mode part. When using Begin2D()
now, the only part of the software buffer that gets updated to the screen
is the part with the actual 3D scene and only if you tell it to.
- Fixed a D3D memory leak on every frame in windowed mode and the same thing
for the screen wipes. Note to self: If it's an interface, be sure to
Release it, because it will be AddRef'ed before being returned to you.
- Moved the BlendView() call out of FBaseStatusBar::Draw() so that it can be
applied before copying the 3D scene to the screen underneath the 2D parts.
- Restored the console's darkening level to its old table-based amount.
- Fixed D3DFB::SetColorOverlay()'s incorrect calculations.
- Fixed the D3D screen wipes for letterboxed modes.
SVN r662 (trunk)
drawn to a texture, then that texture is copied to the real back buffer
using a gamma-correcting pixel shader. In fullscreen mode, SetGammaRamp
is used.
- Fixed flashing of vid_fps display when fps > 1000.
- Fixed loading of RGB textures for native 2D mode.
- Changed the first rotozoomer's data because it just became too obvious when
the backdrop is drawn with a full 256 distinct colors available.
- Set the player backdrop to update no more frequently than 35 FPS, so opening
the player setup menu before starting a game won't produce a very fast
moving backdrop.
- Changed the player backdrop into a texture so that it can be drawn like
anything else.
SVN r648 (trunk)
- Moved the common code of ACS and DECORATE translation generation into the
FRemapTable class.
- Fixed: The DECORATE translation code was not changed for the new data structures.
- Expanded range of ACS and DECORATE translations to 65535.
- Fixed: R_CopyTranslation was not altered for the new functionality.
I removed the function and replaced the one use with a simple assignment.
SVN r644 (trunk)
palettes smaller than 256 entries with the shader I wrote for it. Is there
a list of gotchas like this listed some where? I'd really like to see it.
Well, when compiled with SM2.0, the PalTex shader seems to be every-so-
slightly faster on my GF7950GT than the SM1.4 version, so I guess it's a
minor win for cards that support it.
- Fixed: ST_Endoom() failed to free the bitmap it used.
- Added the DTA_ColorOverlay attribute to blend a color with the texture
being drawn. For software, this (currently) only works with black. For
hardware, it works with any color. The motiviation for this was so I could
rewrite the status bar calls that passed DIM_MAP to DTA_Translation to
draw darker icons into something that didn't require making a whole new
remap table.
- After having an "OMG! How could I have been so stupid?" moment, I have
removed the off-by-one check from D3DFB. I had thought the off-by-one error
was caused by rounding errors by the shader hardware. Not so. Rather, I
wasn't sampling what I thought I was sampling. A texture that uses palette
index 255 passes the value 1.0 to the shader. The shader needs to adjust the
range of its palette indexes, or it will end up trying to read color 256
from the palette texture when it should be reading color 255. Doh!
- The TranslationToTable() function has been added to map from translation
numbers used by actors to the tables those numbers represent. This function
performs validation for the input and returns NULL if the input value
is invalid.
- Major changes to the way translation tables work: No longer are they each a
256-byte array. Instead, the FRemapTable structure is used to represent each
one. It includes a remap array for the software renderer, a palette array
for a hardware renderer, and a native texture pointer for D3DFB. The
translationtables array itself is now an array of TArrays that point to the
real tables. The DTA_Translation attribute must also be passed a pointer
to a FRemapTable, not a byte array as previously.
- Modified DFrameBuffer::DrawRateStuff() so that it can do its thing properly
for D3DFB's 2D mode. Before, any fullscreen graphics (like help images)
covered it up.
SVN r640 (trunk)
- moved the AM line drawer into DCanvas as a virtual function. While testing
this code I discovered that the antialias precalculation was never used
except for the very first frame of AM drawing. However, since I couldn't
detect even a marginal performance improvement using this code on 2 computers
I just disabled it completely because it severely complicates a more generic
implementation. I also disabled am_ovtrans in the process because I couldn't
see any positive effects of using this cvar. All it does is adding some
ugly distortion to the lines it affects without any apparent benefits.
* Added fix by Karate Chris containing:
- Added a 'No team changing' DMFlag2 which prevents players from changing teams
unless they are not on a team.
- Added a 'No respawn' DMFlag2 which prevents a player from respawning after
they have died.
- Added a 'Keep frags gained' DMFlag2 which allows you to choose whether you
want to reset the frags of each player next level or not.
- Added a small visual enhancement to the cooperative scoreboard to show
if a player has died.
- Fixed: If the 'teamplay' console variable was set to 'true' in a cooperative
game, the scoreboard would show team play related items as opposed to
cooperative items.
- Fixed: The 'bot_observer' console variable should not work in network games.
- Fixed: Bots made intermission skip really fast.
SVN r634 (trunk)
- Fixed: ASkyViewpoint::Destroy was missing the super call.
- Added SnowKate709's A_LookEx update.
- Moved M_DrawPlayerBackdrop into DCanvas as a virtual function. Since this
directly accesses the frame buffer it must be overridable for renderers
that work differently.
SVN r632 (trunk)
passing renderer specific data to the function. Also added DTA_Font so
that the renderer can fetch font translations from the proper font.
DIM_MAP/ConShade had to be made a regular translation table to make it
work.
- Added Karate Chris's fix for scoreboard displaying team play related data
in non teamplay games.
- Fixed: The team selection menu didn't work.
- Fixed: UpdateTeam passed an FString to Printf.
SVN r623 (trunk)
- Added a new color parameter to DCanvas::Clear() that specifies the
ARGB value of the color. This is used if the old color parameter,
which specifies a palette entry, is -1.
SVN r617 (trunk)
They are not actually drawn with it yet, nor is it complete, but it's
something to start with.
- Split up DCanvas::DrawTexture() into more pieces to make it easier to
virtualize.
- Removed support for non-32-bit palette textures from D3DFB. What kind of
card supports pixel shaders but not 32-bit textures?
SVN r605 (trunk)
DCanvas::DrawTexture() to calculate off the actual bottom of the image
instead of the height, improving precision. Now the scaled status bar is
flush with the bottom of the screen at 1280x1024, for instance.
SVN r458 (trunk)
warnings. At first, I was going to try and clean them all up. Then I decided
that was a worthless cause and went about just acting on the ones that
might actually be helpful:
C4189 (local variable is initialized but not referenced)
C4702 (unreachable code)
C4512 (assignment operator could not be generated)
SVN r420 (trunk)
on the automap instead. If its first argument is zero, the map marker itself
appears on the automap, otherwise it is drawn on top of any actor with a TID
matching that argument. If the second argument is one, then the map marker
will only be appear if the player has previously seen the sector it is one.
You can use Thing_Activate and Thing_Deactivate on markers to turn them on
and off. And if you subclass MapMarker with DECORATE, you can easily make
your own custom markers.
- Fixed: Map markers could not be drawn partially off the map. They were
drawn either fully or not at all.
- Fixed: Map markers appeared in the wrong place on a rotated overlay map if
screenblocks < 10.
SVN r356 (trunk)
- The stat meters now return an FString instead of sprintfing into a fixed
output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
- For consistancy with the other integral types, byte is no longer a
synonym for BYTE.
- Most uses of BOOL have been change to the standard C++ bool type. Those
that weren't were changed to INTBOOL to indicate they may contain values
other than 0 or 1 but are still used as a boolean.
- Compiler-provided types with explicit bit sizes are now used. In
particular, DWORD is no longer a long so it will work with both 64-bit
Windows and Linux.
- Since some files need to include Windows headers, uint32 is a synonym
for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
was all it contained.
SVN r326 (trunk)
- Changed deh.MaxHealth use to be consistent with other source ports.
- Added NULL pointer checks to APlayerPawn's state set functions. If these
remove the player from the game a crash is the inevitable result.
SVN r325 (trunk)
