- moved all code and data for Build tile management into FTextureManager.
- moved texture animation management into FTextureManager.
- changed: Animate textures only once per frame, not per view. Otherwise with animations that have sub-frame accuracy camera textures of the same area can show different animation frames if the frame changes falls between the rendering of the different views.
SVN r3026 (trunk)
completely ignore them, either).
- Separated light level fixing out of player_t's fixedcolormap parameter.
Using a fixed light level (e.g. PowerTorch) will no longer wipe out
colored lighting.
- Moved the blending rectangle drawing into a separate discrete stage, since
doing it while copying the 3D view window to the display now blends
underneath the weapon instead of on top of it.
- Consolidated the special colormaps into a single 2D table.
- Tweaked the special colormaps slightly to make the true color results more
closely match the paletted approximations.
- fb_d3d9_shaders.h was getting unwieldy, so I moved the shaders out of the
executable and into zdoom.pk3. Shaders are still precompiled so I don't need
to pull in a dependancy on D3DX.
- Added a few more shaders to accomodate drawing weapons with all the in-game
lighting models. These are accessed with the new DrawTexture tags
DTA_SpecialColormap and DTA_ColormapStyle.
- Player weapon sprites are now drawn using Direct3D and receive all the
benefits thereof.
SVN r1858 (trunk)
so that all files are included by a central one instead of compiling
each one separately. This speeds up the compilation process by 25%
when doing a complete rebuild in Visual C.
- Cleaned up more header dependencies.
SVN r1226 (trunk)
registers AMD64 provides, this routine still needs to be written as self-
modifying code for maximum performance. The additional registers do allow
for further optimization over the x86 version by allowing all four pixels
to be in flight at the same time. The end result is that AMD64 ASM is about
2.18 times faster than AMD64 C and about 1.06 times faster than x86 ASM.
(For further comparison, AMD64 C and x86 C are practically the same for
this function.) Should I port any more assembly to AMD64, mvlineasm4 is the
most likely candidate, but it's not used enough at this point to bother.
Also, this may or may not work with Linux at the moment, since it doesn't
have the eh_handler metadata. Win64 is easier, since I just need to
structure the function prologue and epilogue properly and use some
assembler directives/macros to automatically generate the metadata. And
that brings up another point: You need YASM to assemble the AMD64 code,
because NASM doesn't support the Win64 metadata directives.
- Added an SSE version of DoBlending. This is strictly C intrinsics.
VC++ still throws around unneccessary register moves. GCC seems to be
pretty close to optimal, requiring only about 2 cycles/color. They're
both faster than my hand-written MMX routine, so I don't need to feel
bad about not hand-optimizing this for x64 builds.
- Removed an extra instruction from DoBlending_MMX, transposed two
instructions, and unrolled it once, shaving off about 80 cycles from the
time required to blend 256 palette entries. Why? Because I tried writing
a C version of the routine using compiler intrinsics and was appalled by
all the extra movq's VC++ added to the code. GCC was better, but still
generated extra instructions. I only wanted a C version because I can't
use inline assembly with VC++'s x64 compiler, and x64 assembly is a bit
of a pain. (It's a pain because Linux and Windows have different calling
conventions, and you need to maintain extra metadata for functions.) So,
the assembly version stays and the C version stays out.
- Removed all the pixel doubling r_detail modes, since the one platform they
were intended to assist (486) actually sees very little benefit from them.
- Rewrote CheckMMX in C and renamed it to CheckCPU.
- Fixed: CPUID function 0x80000005 is specified to return detailed L1 cache
only for AMD processors, so we must not use it on other architectures, or
we end up overwriting the L1 cache line size with 0 or some other number
we don't actually understand.
SVN r1134 (trunk)
Since it uses fixed point parameters it can only be used in scripts though.
- Added flags parameters to all wall scroller specials that didn't use
all 5 args.
- Separated scrolling of the 3 different texture parts of a sidedef.
While doing this I did some more restructuring of the sidedef structure
and changed it so that all state changes to sidedefs that affect rendering
have to be made with access functions. This is not of much use to the
software renderer but it allows far easier caching of rendering data
for OpenGL because the only place I need to check is in the access functions.
SVN r832 (trunk)
- Changed savegame versioning so that the written version is never lower
than the minmum one reported as compatible.
- Added mirrored movement modes for linked sectors.
- Added Eternity-style initialization for linked sectors as a new subtype
of Static_Init.
- Added linked sectors. The control sector determines how they move but if
any one of the linked sectors is blocked, movement for all linked sectors
will be affected. This will allow lifts consisting out of more than one
sector without the risk of breaking them if only one of the sectors is
blocked.
- Fixed: A_Mushroom created an actor on the stack.
SVN r825 (trunk)
drawing function. The most improvement came from being able to turn some
constant variables into immediate values with self-modifying code, but I
also managed to reorder it to make it a little faster. It's about 9% faster
than VC++'s code and 19% faster than GCC's code. That's not a huge
improvement (for VC++), but at least it's measurable.
- Removed the solid fill "optimization" from rt_shaded4cols(), because in my
testing, it didn't help any and in fact, hurt just a little bit.
- In the name of simplification, all the rt_tlate* drawers were changed to do
the translation in one step and the drawing in another. This lets me call
the untranslated drawer to do the real drawing instead of mostly duplicating
them. Performance wise, there is practically no difference from before.
SVN r771 (trunk)
- Added .txt files to the list of types (wad, zip, and pk3) that can be
loaded without listing them after -file.
- Fonts that are created by the ACS setfont command to wrap a texture now
support animated textures.
- FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn
with the hardware 2D path instead of being restricted to the game palette.
- Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1
on a Radeon 9000.
- Added back the off-by-one palette handling, but in a much more limited
scope than before. The skipped entry is assumed to always be at 248, and
it is assumed that all Shader Model 1.4 cards suffer from this. That's
because all SM1.4 cards are based on variants of the ATI R200 core, and the
RV250 in a Radeon 9000 craps up like this. I see no reason to assume that
other flavors of the R200 are any different. (Interesting note: With the
Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the
debug Direct3D 9 runtime, but it works perfectly fine with the retail
Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its
math inside pixel shaders. That would explain perfectly why I can't use
constants greater than 1 with PS1.4 and why it can't do an exact mapping to
every entry in the color palette.
- Fixed: The software shaded drawer did not work for 2D, because its selected
"color"map was replaced with the identitymap before being used.
- Fixed: I cannot use Printf to output messages before the framebuffer was
completely setup, meaning that Shader Model 1.4 cards could not change
resolution.
- I have decided to let remap palettes specify variable alpha values for
their colors. D3DFB no longer forces them to 255.
- Updated re2c to version 0.12.3.
- Fixed: A_Wander used threshold as a timer, when it should have used
reactiontime.
- Fixed: A_CustomRailgun would not fire at all for actors without a target
when the aim parameter was disabled.
- Made the warp command work in multiplayer, again courtesy of Karate Chris.
- Fixed: Trying to spawn a bot while not in a game made for a crashing time.
(Patch courtesy of Karate Chris.)
- Removed some floating point math from hu_scores.cpp that somebody's GCC
gave warnings for (not mine, though).
- Fixed: The SBarInfo drawbar command crashed if the sprite image was
unavailable.
- Fixed: FString::operator=(const char *) did not release its old buffer when
being assigned to the null string.
- The scanner no longer has an upper limit on the length of strings it
accepts, though short strings will be faster than long ones.
- Moved all the text scanning functions into a class. Mainly, this means that
multiple script scanner states can be stored without being forced to do so
recursively. I think I might be taking advantage of that in the near
future. Possibly. Maybe.
- Removed some potential buffer overflows from the decal parser.
- Applied Blzut3's SBARINFO update #9:
* Fixed: When using even length values in drawnumber it would cap to a 98
value instead of a 99 as intended.
* The SBarInfo parser can now accept negatives for coordinates. This
doesn't allow much right now, but later I plan to add better fullscreen
hud support in which the negatives will be more useful. This also cleans
up the source a bit since all calls for (x, y) coordinates are with the
function getCoordinates().
- Added support for stencilling actors.
- Added support for non-black colors specified with DTA_ColorOverlay to the
software renderer.
- Fixed: The inverse, gold, red, and green fixed colormaps each allocated
space for 32 different colormaps, even though each only used the first one.
- Added two new blending flags to make reverse subtract blending more useful:
STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that
gets blended with the background, since that seems like a good idea for
reverse subtraction. They also work with the other two blending operations.
- Added subtract and reverse subtract blending operations to the renderer.
Since the ERenderStyle enumeration was getting rather unwieldy, I converted
it into a new FRenderStyle structure that lets each parameter of the
blending equation be set separately. This simplified the set up for the
blend quite a bit, and it means a number of new combinations are available
by setting the parameters properly.
SVN r710 (trunk)
from the renderer in case the camera changed position or direction since
the last time it was looked through. Otherwise, the renderer will
interpolate from its previous view for one frame when it is switched to.
- Fixed non-POD parameter passing for GCC introduced in the previous commit.
SVN r476 (trunk)
- Fixed: The PlayerSpeedTrail must copy the player's scaling information
(from Skulltag)
- Added r_maxparticles CVAR from Skulltag.
- Changed PCX loader so that it always loads the last 768 bytes of 8 bit graphics as a palette
SVN r447 (trunk)
be surprised if it doesn't work.
- Reorganized the network startup loops so now they are event driven. There is
a single function that gets called to drive it, and it uses callbacks to
perform the different stages of the synchronization. This lets me have a nice,
responsive abort button instead of the previous unannounced hit-escape-to-
abort behavior, and I think the rearranged code is slightly easier to
understand too.
- Increased the number of bytes for version info during D_ArbitrateNetStart(),
in preparation for the day when NETGAMEVERSION requires more than one byte.
- I noticed an issue with Vista RC1 and the new fatal error setup. Even after
releasing a DirectDraw or Direct3D interface, the DWM can still use the
last image drawn using them when it composites the window. It doesn't always
do it but it does often enough that it is a real problem. At this point, I
don't know if it's a problem with the release version of Vista or not.
After messing around, I discovered the problem was caused by ~Win32Video()
hiding the window and then having it immediately shown soon after. The DWM
kept an image of the window to do the transition effect with, and then when
it didn't get a chance to do the transition, it didn't properly forget about
its saved image and kept plastering it on top of everything else
underneath.
- Added a network synchronization panel to the window during netgame startup.
- Fixed: PClass::CreateDerivedClass() must initialize StateList to NULL.
Otherwise, classic DECORATE definitions generate a big, fat crash.
- Resurrected the R_Init progress bar, now as a standard Windows control.
- Removed the sound failure dialog. The FMOD setup already defaulted to no
sound if initialization failed, so this only applies when snd_output is set
to "alternate" which now also falls back to no sound. In addition, it wasn't
working right, and I didn't feel like fixing it for the probably 0% of users
it affected.
- Fixed: The edit control used for logging output added text in reverse order
on Win9x.
- Went back to the roots and made graphics initialization one of the last
things to happen during setup. Now the startup text is visible again. More
importantly, the main window is no longer created invisible, which seems
to cause trouble with it not always appearing in the taskbar. The fatal
error dialog is now also embedded in the main window instead of being a
separate modal dialog, so you can play with the log window to see any
problems that might be reported there.
Rather than completely restoring the original startup order, I tried to
keep things as close to the way they were with early graphics startup. In
particular, V_Init() now creates a dummy screen so that things that need
screen dimensions can get them. It gets replaced by the real screen later
in I_InitGraphics(). Will need to check this under Linux to make sure it
didn't cause any problems there.
- Removed the following stubs that just called functions in Video:
- I_StartModeIterator()
- I_NextMode()
- I_DisplayType()
I_FullscreenChanged() was also removed, and a new fullscreen parameter
was added to IVideo::StartModeIterator(), since that's all it controlled.
- Renamed I_InitHardware() back to I_InitGraphics(), since that's all it's
initialized post-1.22.
SVN r416 (trunk)
- The stat meters now return an FString instead of sprintfing into a fixed
output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
- For consistancy with the other integral types, byte is no longer a
synonym for BYTE.
- Most uses of BOOL have been change to the standard C++ bool type. Those
that weren't were changed to INTBOOL to indicate they may contain values
other than 0 or 1 but are still used as a boolean.
- Compiler-provided types with explicit bit sizes are now used. In
particular, DWORD is no longer a long so it will work with both 64-bit
Windows and Linux.
- Since some files need to include Windows headers, uint32 is a synonym
for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
was all it contained.
SVN r326 (trunk)
and aren't limited to the script's activator.
- Added GetSectorLightLevel(tag), GetActorCeilingZ(tid) and
SetActorPosition(tid, x, y, z, fog) ACS functions.
- Fixed: First initialization of camera textures should not mark the rendered
lines as mapped.
SVN r198 (trunk)
re2c instead of "Linking X".
- Updated lemon and re2c to the latest versions and ported dehsupp to use them
for code generation. (Xlatcc is next.)
- Added function level linking for Makefile.mingw.
SVN r144 (trunk)
- Fixed: FDoomEdMap needed a destructor.
- Fixed: Decal animators were never freed.
- Fixed: Colormaps were never freed.
- Fixed: Memory allocated in R_InitTranslationTables() was never freed.
- Fixed: R_InitParticles() allocated way more memory than it needed to. (And the
particle memory was never freed, either.)
- Fixed: FMetaTable::FreeMeta() should use delete[] to free string metadata.
- Fixed: FConfigFile::ClearCurrentSection() must cast the entry to a char *
before deleting it, because that's the way it was allocated.
- Fixed definitions of DeadZombieMan and DeadShotgunGuy in doom/deadthings.txt.
Skip_super resets the dropitem list, so having it after "DropItem None" is
pointless.
- Fixed: Decorate DropItem information was never freed.
- Fixed: FinishStates() allocated even 0-entry state arrays.
- Fixed: Default actor instances were never freed.
- Fixed: FRandomSoundList never freed its sound list.
- Fixed: Level and cluster strings read from MAPINFO were never freed.
- Fixed: Episode names were never freed.
- Fixed: InverseColormap and GoldColormap were never freed. Since they're always
allocated, they can just be arrays rather than pointers.
- Fixed: FFont destructor never freed any of the character data or the font's name.
- Fixed: Fonts were not freed at exit.
- Fixed: FStringTable::LoadLanguage() did not call SC_Close().
- Fixed: When using the -iwad parameter, IdentifyVersion() did not release the
buffer it created to hold the parameter's path.
SVN r88 (trunk)
- Removed doom.x, heretic.x and strife.x from the SVN repository. These
are generated files.
- Fixed: A_PainDie has to check whether a valid target exists before
calling IsFriend.
- Fixed: FDecalLib::FindAnimator needs a signed counter to work properly.
May 1, 2006 (Changes by Graf Zahl)
- Added support for game specific pickup messages, if only to be able
to define Raven's invulnerability item in DECORATE.
- Removed A_TreeDeath because it is no longer used.
- Fixed: When picking up a PowerupGiver for an active powerup the
blend color and the duration were transferred to a temorary item
and never took effect. They have to be trnasferred to the newly created
powerup item before trying to give it to the player, not afterward.
- Made the colormap of the InvulnerabilitySphere item specific.
The base power class still needs to have its color adjusted
per game though and since Raven's invulnerability item is used in both
Hexen and Heretic it can't define its own colormap/blend.
- Separated the invulnerability colormaps from the game being played
and made them item specific. They can also be specified as regular
blend colors in DECORATE now.
- Converted a_hereticarmor.cpp and most of a_doomartifacts.cpp,
a_hereticartifacts.cpp and a_heretickeys.cpp to DECORATE.
- Changed the Soulsphere to be a real health item with the Dehacked
modifications made in d_dehacked.cpp as for most other items which
need to be adjusted.
- Added IF_BIGPOWERUP flag to AInventory to expose the RESPAWN_SUPER
dmflag to DECORATE. Also removed the now obsolete ShouldRespawn methods
from AInvulnerabilitySphere and ABlurSphere.
- Converted a_splashes.cpp to DECORATE.
- Converted most of a_debris.cpp to DECORATE.
SVN r73 (trunk)
returning from one function to another function when the function that
was called was used as part of an expression.
- Fixed: Using Thing_Hate with arg0 (hater) set to 0 from an open script
could crash.
- Fixed: Some items along ledges in Hexen's MAP32 (Orchard of Lamentations)
appeared at the bottom of the ledge (and consequently inside it) instead
of on top of it because the items were placed directly on the lines.
AActor::LinkToWorldForMapThing() needs to use the original R_PointOnLineSide()
code to handle situations like this. Previously, it just used the original
code for straight horizontal/vertical lines and used the new code for
diagonal lines.
- Fixed: FWadCollection::MergeLumps() used in incorrect realloc.
- Fixed: FPlayList::NextLine() did not properly handle blank lines in the
playlist.
- Changed: Decals now use lightweight thinkers instead of actors. (76 bytes
versus 396, so you save 320k if you have 1024 decals present.)
- Fixed: Wads added with pullin were loaded immediately after the IWAD.
Exec files are now processed immediately before -file but after autoloading
wads in D_DoomMain().
- Fixed: sdl/i_system.h unconditionally defined SHARE_DIR, preventing
redefinition from the command line.
- Fixed: The standard way to include SDL.h is <SDL.h>, not <SDL/SDL.h>.
- Fixed: Returned FActiveInterpolation::HashKey()'s return type to size_t,
avoiding a pointer truncation warning.
SVN r30 (trunk)
