- Changes the caller's angle and pitch according to the direction of velocity they're travelling.
- FVF_NOPITCH and FVF_NOANGLE disable changing of pitch/angle respectively and should be counted as mutually exclusive, or the function does nothing.
- FVF_INTERPOLATE - Interpolate's the angle and pitch changes.
- FVF_RESETPITCH will, if there's no z velocity, reset the pitch to 0. Otherwise, the pitch remains unchanged.
- Performs a jump if an actor or a line is in the way.
- Can be used without a jump state if the desire is only to have a pointer change.
- CBF_NOLINES disables jumping if a line is involved.
- CBF_SET* flags set the target, master or tracer to whoever is blocking, for the actor calling the function.
- CBF_SETONPTR causes the pointer changing flags to apply to the pointed actor instead of itself.
- RadiusOffset is a multiplier of the target actor's radius added onto the offsets x and y.
- Pitch is added to the warping actor's current pitch, provided WARPF_USEPITCH is supplied.
- Fixed WARPF_TOFLOOR not working as intended.
- Added filter and species parameter.
- Added new flags: RGF_INCLUSIVE, RGF_ITEMS, RGF_KILLED, RGF_EXFILTER, RGF_EXSPECIES, and RGF_EITHER.
- RGF_ITEMS: Items can receive inventory.
- RGF_KILLED: Actors who are truly dead might not be corpses, and vice versa.
- RGF_EXFILTER: Blacklists the specified actor filter. All but the filtered actor can receive the item.
- RGF_EXSPECIES: Blacklists the specified species. All but the filtered species can receive the item.
- RGF_EITHER: The actor can receive the item if it satisfies either the filter or the species. Only useful when both are used.
- RGF_INCLUSIVE: An actor marked as more than one pointer to the calling actor can ignore the exclusion pointers, but only if at least one is missing. I.e. an actor who is a target and tracer of the calling actor can still receive the item, if the calling actor doesn't pass RGF_NOTARGET and NOTRACER at the same time. RGF_INCLUSIVE only works with the pointer filtering flags. By default, if not specified, the actor will not be loopholed the item if they are under any one of the three filters.
- Fixed discrepancies and dependencies upon several flags and actor conditions which caused the function to fail.
- Overrides the NOTELEPORT flag so actors with velocity don't need to disable it in order to perform A_Teleport, which could be screwed up by a teleporting line or sudden ACS interference.
- Ensure that the result is set to false if it fails prematurely. Wasn't sure if this was needed, but with the upcoming if/else statements, better safe than sorry.
- Squashed commit of the following:
commit bc45fe3263d34ef5f746f524687999c19bf7b779
Author: Randy Heit <rheit@users.noreply.github.com>
Date: Sun Mar 1 18:51:05 2015 -0600
wave scale -> wave speed
commit ff96388b128c724c1198757bfa52f1935a263356
Author: Randy Heit <rheit@users.noreply.github.com>
Date: Sun Mar 1 18:45:32 2015 -0600
More sine quake fixes
commit 2a89749a6fe6d271b9fbdc218779f680afcf4cb6
Merge: 719dfbe 5456074
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 20:37:22 2015 -0600
Added QF_WAVE to A_QuakeEx.
- Changes the random quakes into a sine wave (see Shadow Warrior/Rise of the Triad reboots, Hard Reset, etc.)
- Added 3 properties to control waves per second along each individual axis. Only works with QF_WAVE.
- Intensity X/Y/Z property becomes the amplitude of the wave.
- Stacks with regular quakes, allowing shaking along the camera which must be called using A_QuakeEx WITHOUT the flag, or the other quaking functions.
- Uses the youngest quake's time for positioning.
commit 54560741581e8d15cc7060e8e068cf85e9a4b432
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 20:21:19 2015 -0600
Recommitted recommended changes by Randi, with some modifications. Now, we should be finished!
commit 6f4473013411686d88fc185bdc1cc58b1035b0f1
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 12:52:57 2015 -0600
Finish this revert.
commit 467e53f9400f588a2ada9b32e7634cb1f4ad5066
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sat Feb 28 12:46:02 2015 -0600
Reverted back to what was working.
commit da9de56a67efda08036e481fd5fccd5392ce6810
Author: MajorCooke <paul.growney22@gmail.com>
Date: Thu Feb 26 18:53:20 2015 -0600
Forgot this bit, for testing.
commit c5093d9bb97caf8478cefc32abc56a036feeea58
Author: MajorCooke <paul.growney22@gmail.com>
Date: Thu Feb 26 18:52:46 2015 -0600
Some more progress, but...
- This did not solve anything. In fact, it did the opposite -- completely broke wave quakes. Now they only happen whenever a random quake is in progress.
- Left in the commented code on purpose so Randi can test it.
commit 7e526405d2127cbb279f66008c8f8e55a5d497f3
Author: MajorCooke <paul.growney22@gmail.com>
Date: Wed Feb 25 17:50:42 2015 -0600
- Use newest waveform timer, not oldest.
commit 1356443609dbc6c7f46e081d0846816dc0836124
Author: MajorCooke <paul.growney22@gmail.com>
Date: Wed Feb 25 17:32:09 2015 -0600
- Got regular quakes to multiply onto sine quakes, but the vice versa needs fixing too.
commit d95796c94c70cd0229d4a6d30f69e3a7568b9588
Author: MajorCooke <paul.growney22@gmail.com>
Date: Wed Feb 25 16:46:21 2015 -0600
- Last hurdle. Now just need to figure out how to properly scale up and down.
commit 4bc3458e689155ce72c09776604d9eb4fa73d8be
Author: MajorCooke <paul.growney22@gmail.com>
Date: Tue Feb 24 23:18:03 2015 -0600
- Fixed the quakes being unstackable.
commit b51012d6d4ea065bf7f6fc9c1a0472966491f7af
Author: MajorCooke <paul.growney22@gmail.com>
Date: Mon Feb 23 23:48:34 2015 -0600
QF_WAVE renamed from SINE.
- Lots of ground covered, but still more to go.
- Still need to figure out how to make the camera properly shudder.
commit 427e4893193470bbf45415ffec70a0b69b8cccfd
Author: MajorCooke <paul.growney22@gmail.com>
Date: Sun Feb 22 16:52:30 2015 -0600
- Begin the groundworks for QF_SINE.
- Need to figure out how to rework and manipulate the sine wave to move faster, and to allow going below 0 without breaking it too much.
- When using both scaling flags, by default, the effect only reaches half peak going either way. This forces it to go all the way to the top (or bottom if using QF_MAX) before scaling back to its original height..
- QF_SCALEUP behaves like QF_SCALEDOWN: it gradually scales the tremors, only going upwards.
- QF_SCALEUP and QF_SCALEDOWN can be combined to make an earthquake that gradually smoothes in and out.
- QF_MAX can be used to invert this behavior, where it starts at the peak of the amplitude, fades out half way, and then grows back to maximum.
- Unlocks the full potential of using quakes, including the Z axis. Each intensity applies to X/Y/Z planes whenever a player is experiencing it.
- Flags:
- QF_RELATIVE - Adjusts the quaking of the camera to go in the direction its aiming (X: forward/backward. Y: Left/right.)
- Plans for including pitch will be implemented in the future for the Z axis with relativity.
- ang_offset: the extra angle to apply to the actor after calculating the maximum turn.
- pitch_offset: Just like ang_offset, with pitch instead.
- FAF_BOTTOM: Aim straight for the actor's z coordinate, not with +32 units.
- FAF_MIDDLE: Aims for the direct middle of the actor.
- FAF_TOP: Aims for the very top of the actor.
- FAF_NODISTFACTOR: Use the raw pitch offset without calculating it into the distance of the aimed actor.
- Added A_Warp flags:
- WARPF_BOB: Gets the bob offset of actor pointer with the FLOATBOB flag.
- WARPF_MOVEPTR: The function is inversed to move the pointed actor with applied flags, but only the original caller will make the success/jump.
- Do a filter and species check first to save time.
- Added DMSS/KILS/RMVF_EITHER, which means if the actor is of type or species, it counts.
- A_DamageTarget(20,"Normal",DMSS_EITHER,"DoomImp","CyberdemonSpecies")
- This affects actor DoomImp, and anything that's of species CyberdemonSpecies.
- Added a little more documentation via comments.
- Added two more flags for each of the functions, EXFILTER and EXSPECIES.
- Stands for "exclude filter/species" and makes the function not take them into account.
- Cleaned up the code and placed all the checking in their own subfunctions.
- TF_KEEPVELOCITY: Keep the velocity after teleporting.
- TF_KEEPANGLE: Don't use the special spot's angle.
- TF_USESPOTZ: Normally, this function
- TF_NOSRCFOG: Don't leave fog at the previous location.
- TF_NODESTFOG: Don't leave fog at the arriving location.
- TF_USEACTORFOG: Use the actor's TeleFogSourceType and TeleFogDestType properties.
- TF_NOJUMP: Don't require or cause a jump. In this case, put 0 (or "") in for the jump destination when using CustomInventory items to teleport actors around.
- CLOFF_SETTARGET | CLOFF_SETMASTER | CLOFF_SETTRACER
- An actor that causes A_CheckLOF (and only an actor) to succeed will set the intercepting actor as its target, master, and/or tracer, respectively.
- FTF_REMOVE: Removes the actor when the alpha hits a certain level.
- - A_FadeIn - 1.0
- - A_FadeOut - 0.0
- - A_FadeTo - Alpha target level reached
- FTF_CLAMP: Automatically fixes the alpha so it won't leave the range [0.0, 1.0].
- Added: A_TakeFromChildren
- Added: A_GiveToSiblings
- Added: A_TakeFromSiblings
- Added the following flags for A_RadiusGive:
- RGF_NOSIGHT: Exclude sight check from distance.
- RGF_MISSILES: Missiles can take inventory items.
- RMVF_MISSILES removes missiles.
- RMVF_NOMONSTERS ignores monsters.
- RMVF_MISC includes non-monsters and missiles.
- RMVF_EVERYTHING disregards all checks and remove it.
These flags now apply to the following in addition to the new function:
-A_RemoveTarget
-A_RemoveMaster
-A_RemoveTracer
-A_RemoveChildren
-A_RemoveSiblings
- Added A_KillTarget(damagetype, int flags).
- Added A_KillTracer(damagetype, int flags).
- Added A_RemoveTarget.
- Added A_RemoveTracer.
A_Kill (Master/Target/Tracer/Children/Siblings):
- KILS_FOILINVUL: foils invulnerability.
- KILS_KILLMISSILES: destroys projectiles. Does not work on invulnerable
projectiles without KILS_FOILINVUL, and doesn't work at all on missiles
with NODAMAGE flag.
- KILS_NOMONSTERS: actors that are monsters will not be killed.
A_Damage (Self/Target/Master/Tracer/Children/Siblings):
- DMSS_FOILINVUL: foils invulnerability.
- DMSS_AFFECTARMOR: damages the actor's armor instead of bypassing it
entirely.
- DMSS_KILL: damages the actor by its remaining health (useful for
modular DECORATE programming).
- Added A_SpawnItemEx flags:
- SXF_SETTARGET: sets the calling actor as the target.
- SXF_SETTRACER: sets the calling actor as the tracer.
Both of these functions take priority similar to SXF_SETMASTER over
SXF_TRANSFERPOINTERS.
