Warning was reported by GCC 7 only:
cmdlib.cpp:550:13: warning: ‘info.stat::st_mode’ may be used uninitialized in this function [-Wmaybe-uninitialized]
Since this is a non-standard function it's better kept to as few places as possible, so now DirEntryExists returns an additional flag to say what type an entry is and is being used nearly everywhere where stat was used, excluding a few low level parts in the POSIX code.
The old code went through a list of predefined file names and looked each of them up in a list of predefined directories until it found a match. This made it nearly impossible to add custom IWAD support because the list of valid file names could not be extended.
This has now been switched around to run a scan for matching files on each given directory. With this approach it can look for *.iwad and *.ipk3 as IWAD extensions as well and read an IWADINFO out of these files that can be added to the internal list of IWADs, making it finally possible to define custom IWADs without having to add them to the internal list.
(This isn't fully tested yet so some errors may still occur.)
For some files that had the Doom Source license attached but saw heavy external contributions over the years I added a special note to license all original ZDoom code under BSD.
- Fixed: The non-Windows CreatePath can fail if part of the path already
exists, because mkdir will return an error code for trying to recreate
an existing directory.
SVN r1814 (trunk)
that parameter is now gone.
- Removed automatic ".wad" appending from FWadCollection::InitMultipleFiles()
since it isn't needed and prevented files without extensions from being
loaded. D_AddFile() already takes care of adding the extension if the
name as-given does not exist.
- Fixed: Loading single files did not print a newline in the startup text.
SVN r1784 (trunk)
- Removed #pragma warnings from cmdlib.h and fixed the places where they were
still triggered.
These #pragmas were responsible for >90% of the GCC warnings that were not
listed in VC++.
- Fixed one bug in the process: DSeqNode::m_Atten was never adjusted when the
parameter handling of the sound functions for attenuation was changed.
Changed m_Atten to a float and fixed the SNDSEQ parser to set proper values.
Also added the option to specify attenuation with direct values in addition
to the predefined names.
SVN r1583 (trunk)
have those escapes stripped before printing so that they do not merge with
subsequent text.
- Moved default weapon slot assignments into the player classes.
Weapon.SlotNumber is now used solely for mods that want to add new weapons
without completely redoing the player's arsenal. Restored some config-based
weapon slot customization, though slots are no longer automatically saved
to the config and section names have changed slightly. However, unlike
before, config slots are now the definitive word on slot assignments and
cannot be overridden by any other files loaded.
- Fixed: Several weapons were missing a game filter from their definitions.
- Removed storage of weapon slots in the config so that weapon slots can
be setup in the weapons themselves. Slots are still configurable, since
they need to be for KEYCONF to work; any changes simply won't be saved
when you quit.
- Removed limit on weapon slot sizes.
SVN r1428 (trunk)
- Fixed: Most Linux filesystems do not fill in d_type for scandir(), so we
cannot rely on it to detect directories.
- Added NicePath() function to perform shell-style ~ substitution on path
names.
- Changed the default screenshot directory on Unix to ~/.zdoom/screenshots/.
- Added -shotdir command line option to temporarily override the
screenshot_dir cvar.
SVN r1413 (trunk)
instead of overwriting the original string. ACS performing this operation
in place caused crashes with RTC-3057.
- fixed: FScriptPosition::Message did not print the message if it was not
a fatal error.
SVN r1313 (trunk)
- AutoExec paths now support the same variable expansion as the search paths.
Additionally, on Windows, the default autoexec path is now relative to
$PROGDIR, rather than using a fixed path to the executable's current
directory.
- All usable Autoload and AutoExec sections are now created at the top of
the config file along with some brief explanatory notes so they are
readily visible to anyone who wants to edit them.
SVN r1307 (trunk)
surprised if this doesn't build in Linux right now. The CMakeLists.txt
were checked with MinGW and NMake, but how they fair under Linux is an
unknown to me at this time.
- Converted most sprintf (and all wsprintf) calls to either mysnprintf or
FStrings, depending on the situation.
- Changed the strings in the wbstartstruct to be FStrings.
- Changed myvsnprintf() to output nothing if count is greater than INT_MAX.
This is so that I can use a series of mysnprintf() calls and advance the
pointer for each one. Once the pointer goes beyond the end of the buffer,
the count will go negative, but since it's an unsigned type it will be
seen as excessively huge instead. This should not be a problem, as there's
no reason for ZDoom to be using text buffers larger than 2 GB anywhere.
- Ripped out the disabled bit from FGameConfigFile::MigrateOldConfig().
- Changed CalcMapName() to return an FString instead of a pointer to a static
buffer.
- Changed startmap in d_main.cpp into an FString.
- Changed CheckWarpTransMap() to take an FString& as the first argument.
- Changed d_mapname in g_level.cpp into an FString.
- Changed DoSubstitution() in ct_chat.cpp to place the substitutions in an
FString.
- Fixed: The MAPINFO parser wrote into the string buffer to construct a map
name when given a Hexen map number. This was fine with the old scanner
code, but only a happy coincidence prevents it from crashing with the new
code
- Added the 'B' conversion specifier to StringFormat::VWorker() for printing
binary numbers.
- Added CMake support for building with MinGW, MSYS, and NMake. Linux support
is probably broken until I get around to booting into Linux again. Niceties
provided over the existing Makefiles they're replacing:
* All command-line builds can use the same build system, rather than having
a separate one for MinGW and another for Linux.
* Microsoft's NMake tool is supported as a target.
* Progress meters.
* Parallel makes work from a fresh checkout without needing to be primed
first with a single-threaded make.
* Porting to other architectures should be simplified, whenever that day
comes.
- Replaced the makewad tool with zipdir. This handles the dependency tracking
itself instead of generating an external makefile to do it, since I couldn't
figure out how to generate a makefile with an external tool and include it
with a CMake-generated makefile. Where makewad used a master list of files
to generate the package file, zipdir just zips the entire contents of one or
more directories.
- Added the gdtoa package from netlib's fp library so that ZDoom's printf-style
formatting can be entirely independant of the CRT.
SVN r1082 (trunk)
channel when restarting the song, rather than emitting a single note off
event which only has a 1 in 127 chance of being for a note that's playing
on that channel. Then I decided it would probably be a good idea to reset
all the controllers as well.
- Increasing the size of the internal Timidity stream buffer from 1/14 sec
(copied from the OPL player) improved its sound dramatically, so apparently
Timidity has issues with short stream buffers. It's now at 1/2 sec in
length. However, there seems to be something weird going on with
corazonazul_ff6boss.mid near the beginning where it stops and immediately
restarts a guitar on the exact same note.
- Added a new sound debugging cvar: snd_drawoutput, which can show various
oscilloscopes and spectrums.
- Internal TiMidity now plays music.
- Changed the progdir global variable into an FString.
SVN r900 (trunk)
- Added .txt files to the list of types (wad, zip, and pk3) that can be
loaded without listing them after -file.
- Fonts that are created by the ACS setfont command to wrap a texture now
support animated textures.
- FON2 fonts can now use their full palette for CR_UNTRANSLATED when drawn
with the hardware 2D path instead of being restricted to the game palette.
- Fixed: Toggling vid_vsync would reset the displayed fullscreen gamma to 1
on a Radeon 9000.
- Added back the off-by-one palette handling, but in a much more limited
scope than before. The skipped entry is assumed to always be at 248, and
it is assumed that all Shader Model 1.4 cards suffer from this. That's
because all SM1.4 cards are based on variants of the ATI R200 core, and the
RV250 in a Radeon 9000 craps up like this. I see no reason to assume that
other flavors of the R200 are any different. (Interesting note: With the
Radeon 9000, D3DTADDRESS_CLAMP is an invalid address mode when using the
debug Direct3D 9 runtime, but it works perfectly fine with the retail
Direct3D 9 runtime.) (Insight: The R200 probably uses bytes for all its
math inside pixel shaders. That would explain perfectly why I can't use
constants greater than 1 with PS1.4 and why it can't do an exact mapping to
every entry in the color palette.
- Fixed: The software shaded drawer did not work for 2D, because its selected
"color"map was replaced with the identitymap before being used.
- Fixed: I cannot use Printf to output messages before the framebuffer was
completely setup, meaning that Shader Model 1.4 cards could not change
resolution.
- I have decided to let remap palettes specify variable alpha values for
their colors. D3DFB no longer forces them to 255.
- Updated re2c to version 0.12.3.
- Fixed: A_Wander used threshold as a timer, when it should have used
reactiontime.
- Fixed: A_CustomRailgun would not fire at all for actors without a target
when the aim parameter was disabled.
- Made the warp command work in multiplayer, again courtesy of Karate Chris.
- Fixed: Trying to spawn a bot while not in a game made for a crashing time.
(Patch courtesy of Karate Chris.)
- Removed some floating point math from hu_scores.cpp that somebody's GCC
gave warnings for (not mine, though).
- Fixed: The SBarInfo drawbar command crashed if the sprite image was
unavailable.
- Fixed: FString::operator=(const char *) did not release its old buffer when
being assigned to the null string.
- The scanner no longer has an upper limit on the length of strings it
accepts, though short strings will be faster than long ones.
- Moved all the text scanning functions into a class. Mainly, this means that
multiple script scanner states can be stored without being forced to do so
recursively. I think I might be taking advantage of that in the near
future. Possibly. Maybe.
- Removed some potential buffer overflows from the decal parser.
- Applied Blzut3's SBARINFO update #9:
* Fixed: When using even length values in drawnumber it would cap to a 98
value instead of a 99 as intended.
* The SBarInfo parser can now accept negatives for coordinates. This
doesn't allow much right now, but later I plan to add better fullscreen
hud support in which the negatives will be more useful. This also cleans
up the source a bit since all calls for (x, y) coordinates are with the
function getCoordinates().
- Added support for stencilling actors.
- Added support for non-black colors specified with DTA_ColorOverlay to the
software renderer.
- Fixed: The inverse, gold, red, and green fixed colormaps each allocated
space for 32 different colormaps, even though each only used the first one.
- Added two new blending flags to make reverse subtract blending more useful:
STYLEF_InvertSource and STYLEF_InvertOverlay. These invert the color that
gets blended with the background, since that seems like a good idea for
reverse subtraction. They also work with the other two blending operations.
- Added subtract and reverse subtract blending operations to the renderer.
Since the ERenderStyle enumeration was getting rather unwieldy, I converted
it into a new FRenderStyle structure that lets each parameter of the
blending equation be set separately. This simplified the set up for the
blend quite a bit, and it means a number of new combinations are available
by setting the parameters properly.
SVN r710 (trunk)
- Added integer constant declarations to objects.
- Added some new token-based functions to sc_man.cpp that know about keywords
and record proper type information, so parsers don't need to treat
everything as strings.
- Added a simple symbol table to PClass.
SVN r394 (trunk)
- The stat meters now return an FString instead of sprintfing into a fixed
output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
- For consistancy with the other integral types, byte is no longer a
synonym for BYTE.
- Most uses of BOOL have been change to the standard C++ bool type. Those
that weren't were changed to INTBOOL to indicate they may contain values
other than 0 or 1 but are still used as a boolean.
- Compiler-provided types with explicit bit sizes are now used. In
particular, DWORD is no longer a long so it will work with both 64-bit
Windows and Linux.
- Since some files need to include Windows headers, uint32 is a synonym
for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
was all it contained.
SVN r326 (trunk)
using duplicate DoomEdNums and will affect all attempts to spawn the
replaced actor. However, because this happens for all spawns and not just
at map load, the replacing actor must be compatible with the replaced
actor, which means that an actor can only serve as a replacement for one
of its baseclasses. For example, if you want to use a modified imp, you can
use this DECORATE:
actor MyImp : DoomImp replaces DoompImp
{
// Put changed properties here
}
- New: The IWAD dialog now remembers the last IWAD you picked and
automatically highlights it the next time you run the game. This also
applies if you check "Don't ask me this again": The IWAD selected will be
the one that gets automatically loaded, not the one located first. (Using
the -iwad parameter will not change the default IWAD.) In addition, you
can now bring the dialog up even if you disable it by holding down SHIFT
during startup.
- Changed ExtractFilePath() and ExtractFileBase() to return FStrings instead
of writing to a provided output buffer. ExtractFileBase() can also
optionally keep the file's extension in the result.
- Removed the -heapsize parameter entirely. The informational message should
no longer be needed.
- Removed -maxdemo parameter. There's no point to having it around since
the demo buffer grows automatically.
SVN r238 (trunk)
its tiles are loaded from the same directory.
- RFF files now load their entire directories into the lumplist.
- Added char * and const char * type coversions for FString, so FStrings can be
freely passed to functions expecting C strings. (Except varargs functions,
which still require manually fetching the C string out of it.)
- Renamed the name class to FName.
- Renamed the string class to FString to emphasize that it is not std::string.
SVN r74 (trunk)
