Latency placement is no longer fixed:
* If time is visible, it is placed on top of the screen and latency is placed below
* If time is not visible, latency is placed on top of the screen
Both are displayed on alternative HUD only
and two new functions, both of which are intended for use in conjunction with SetHUDSize:
* SetHUDClipRect(x, y, width, height[, wrapwidth]) - Set the clipping rectangle for future
HUD messages. If you do not specify <wrapwidth>, the HUD message will be layed out as
normal, but pixels outside the rectangle will not be drawn. If you specify <wrapwidth>,
then the message will be wrapped to that width. Use SetHUDClipRect(0, 0, 0, 0[, 0]) to
reset everything
back to normal.
* SetHUDWrapWidth(wrapwidth) - Sets the wrapping width for future HUD messages without
altering the clipping rectangle. If you set the wrapping width to 0, messages will wrap
to the full width of the HUD, as normal.
* HUDMSG_NOWRAP - A HUDMessage() flag that disables wrapping for one message. It is
functionally equivalent to SetHUDWrapWidth(0x7FFFFFFF), except that it only affects the
message it's attached to.
SVN r3960 (trunk)
* HUDMSG_NOTWITH3DVIEW : This message does not appear when the 3D view is active.
* HUDMSG_NOTWITHFULLMAP : This message does not appear when the fullscreen automap is active.
* HUDMSG_NOTWITHOVERLAYMAP : This message does not appear when the overlay automap is active.
These flags may be combined, so for example: HUDMSG_NOTWITHFULLMAP | HUDMSG_NOTWITHOVERLAYMAP
would prevent the message from appearing if any form of automap is active.
- Added HUD message layers, which are ORed into the type field:
* HUDMSG_LAYER_OVERHUD : This is the default and standard behavior. The message appear on
top of most HUD elements. This definition is just included for completeness' sake; you
don't need to explicitly use it.
* HUDMSG_LAYER_UNDERHUD : The message appears underneath other HUD elements, such as the status bar.
* HUDMSG_LAYER_OVERMAP : The message appears on top of the fullscreen automap. At the moment,
this layer is functionally equivalent to using the flags HUDMSG_NOTWITH3DVIEW | HUDMSG_NOTWITHOVERLAYMAP.
However, if Blzut3 decides to implement support for drawing the automap permanently on a
second screen, messages on this layer will move to that screen with the automap and be permanently
visible as long as the map is visible on that other screen.
These are not flags, so for example HUDMSG_LAYER_UNDERHUD | HUDMSG_LAYER_OVERHUD is not valid.
SVN r3821 (trunk)
- Initialize the alt HUD explicitly in D_DoomMain.
- don't let S_UnloadReverbDef leave a broken list of sound environments behind.
- Added more code to explicitly delete data before initializing it.
SVN r3039 (trunk)
- Added character alignment parameter to font monospacing.
- Fixed: character shadows were not scaled.
- Heretic keys now have an icon associated with them so that they can be drawn through drawkeybar.
- Replaced the built in Heretic and Hexen status bars with SBarInfo equivalents.
SVN r2353 (trunk)
- Reorganized the SBarInfo code.
- Added interpolate(<speed>) flag to drawnumber, drawbar, and drawgem. The old
way of interpolating the health and armor is depreciated.
- Added: armortype to drawswitchableimage loosely based on Gez's submission.
- As an extension to the previous you can now use comparison operators on
inventory items and armortype in drawswitchableimage.
SVN r2069 (trunk)
failed to start the demo.
- Added a MF5_BRIGHT flag to always render an actor fullbright.
- Fixed: Calling Door_Animated with a non-zero tag created a new thinker
for each two-sided line of the sector.
- Added Karate Chris's submission for making 'spray' a cheat.
- Added CO2's default parameter additions for several Doom code pointers
submission.
- Added CO2's A_RemoveMaster/A_RemoveChildren submission.
- Added Blzut3's SBARINFO replacement for the Doom statusbar.
- Fixed: SBarInfo still displayed the wrong bar for height 0
- Added A_KillSiblings and A_DamageSiblings code pointers.
- added MaxAbsorb and MaxFullAbsorb properties for Armor.
SVN r1304 (trunk)
- Changed WI_drawPercent() when wi_percents is false so that the total
display is optional, and it formats it like Heretic's intermission, with
a slash and a fixed-width right column.
- Font is no longer a property of the screen object. Pass the font to
DrawText and DrawChar directly instead.
- Doom's intermission characters are now collected together as a font
so they can be colorized.
SVN r1294 (trunk)
so that all files are included by a central one instead of compiling
each one separately. This speeds up the compilation process by 25%
when doing a complete rebuild in Visual C.
- Cleaned up more header dependencies.
SVN r1226 (trunk)
SBARINfO update:
- Added: disablegrin, disableouch, disablepain, and disablerampage flags to
drawmugshot.
- Fixed: LowerHealthCap did not work properly.
- Fixed: Various bugs I noticed in the fullscreenoffsets code.
SVN r1122 (trunk)
- Added: fullscreenoffsets flag for status bars. This changes the coordinate
system to be relative to the top left corner of the screen. This is useful
for full screen status bars.
- Changed: drawinventorybar will use the width of artibox or invcurs (strife)
to determine the spacing. Let me know if this breaks any released mods.
- Fixed: If a status bar height of 0 was specified in SBarInfo the wrong bar
would be shown.
- Fixed: If a static inventory bar was used the user still had to press invuse
in order to get rid of the "overlay".
- Fixed: forcescaled would not work if the height of the bar was 0.
- Added: keyslot to drawswitchableimage.
- Fixed: The transition effects for the log and keys popups were switched.
SVN r1116 (trunk)
into a single place.
- Fixed: Setting an invalid mug shot state crashed the game.
- Fixed my attempts to be clever with strings yesterday.
SVN r1009 (trunk)
- Added: hasweaponpiece command to check for custom weapon pieces.
- Added: usessecondaryammo command to check if the current weapon has a second
ammo type.
- Most of SBarInfo's mugshot scripting can be used with the default Doom status
bar.
- Fixed: By default drawmugshot would never come out of normal god mode state.
In addition the state change to and from god mode was not quite as responsive
as the original code.
SVN r980 (trunk)
will also double as the pistol's icon in the AltHUD.
- Added a generic log display that can show Strife's log messages in all games
regardless of the current game, active status bar and HUD mode.
- Added GZDoom's alt HUD.
SVN r693 (trunk)
palettes smaller than 256 entries with the shader I wrote for it. Is there
a list of gotchas like this listed some where? I'd really like to see it.
Well, when compiled with SM2.0, the PalTex shader seems to be every-so-
slightly faster on my GF7950GT than the SM1.4 version, so I guess it's a
minor win for cards that support it.
- Fixed: ST_Endoom() failed to free the bitmap it used.
- Added the DTA_ColorOverlay attribute to blend a color with the texture
being drawn. For software, this (currently) only works with black. For
hardware, it works with any color. The motiviation for this was so I could
rewrite the status bar calls that passed DIM_MAP to DTA_Translation to
draw darker icons into something that didn't require making a whole new
remap table.
- After having an "OMG! How could I have been so stupid?" moment, I have
removed the off-by-one check from D3DFB. I had thought the off-by-one error
was caused by rounding errors by the shader hardware. Not so. Rather, I
wasn't sampling what I thought I was sampling. A texture that uses palette
index 255 passes the value 1.0 to the shader. The shader needs to adjust the
range of its palette indexes, or it will end up trying to read color 256
from the palette texture when it should be reading color 255. Doh!
- The TranslationToTable() function has been added to map from translation
numbers used by actors to the tables those numbers represent. This function
performs validation for the input and returns NULL if the input value
is invalid.
- Major changes to the way translation tables work: No longer are they each a
256-byte array. Instead, the FRemapTable structure is used to represent each
one. It includes a remap array for the software renderer, a palette array
for a hardware renderer, and a native texture pointer for D3DFB. The
translationtables array itself is now an array of TArrays that point to the
real tables. The DTA_Translation attribute must also be passed a pointer
to a FRemapTable, not a byte array as previously.
- Modified DFrameBuffer::DrawRateStuff() so that it can do its thing properly
for D3DFB's 2D mode. Before, any fullscreen graphics (like help images)
covered it up.
SVN r640 (trunk)
passing renderer specific data to the function. Also added DTA_Font so
that the renderer can fetch font translations from the proper font.
DIM_MAP/ConShade had to be made a regular translation table to make it
work.
- Added Karate Chris's fix for scoreboard displaying team play related data
in non teamplay games.
- Fixed: The team selection menu didn't work.
- Fixed: UpdateTeam passed an FString to Printf.
SVN r623 (trunk)
- The stat meters now return an FString instead of sprintfing into a fixed
output buffer.
- NOASM is now automatically defined when compiling for a non-x86 target.
- Some changes have been made to the integral types in doomtype.h:
- For consistancy with the other integral types, byte is no longer a
synonym for BYTE.
- Most uses of BOOL have been change to the standard C++ bool type. Those
that weren't were changed to INTBOOL to indicate they may contain values
other than 0 or 1 but are still used as a boolean.
- Compiler-provided types with explicit bit sizes are now used. In
particular, DWORD is no longer a long so it will work with both 64-bit
Windows and Linux.
- Since some files need to include Windows headers, uint32 is a synonym
for the non-Windows version of DWORD.
- Removed d_textur.h. The pic_t struct it defined was used nowhere, and that
was all it contained.
SVN r326 (trunk)
