. tmthing can be NULL if called from PTR_SlideTraverse, so we should use slidemo instead
This fixes a crash that occurs in yet ANOTHER SUGOI map, involving bouncy walls next to sloped floors/ceilings
To understand: look at AjustSegs(void) in hw_bsp.c. It reallocates the vetex_t pointers for lines as POLYVERTEX_T pointers, and of COURSE things are gonna get wacky when you're casting pointers.
I dunno how resilient the FLOAT_TO_FIXED solution is or whether it'll be netgame compatible (yayyy float precision loss) but it's not like our builds are netgame compatible with themselves
* The NiGHTS drone had a single tic of visibility when you hit the goal, which is evident stepping frame by frame through http://gfycat.com/ComplicatedComposedAoudad (the contents of which may or may not make it into 2.2).
* When completing a NiGHTS stage with a non-zero link, the link could flash up in the final few tics before the fade to black. This just checks for player->exiting to make sure it shouldn't be shown.
OpenGL planes fix
This branch removes a specific hack in the OpenGL code for detecting if a plane is for the floor or ceiling of a sector. This it turns out fixes ceiling slopes in Boinciel's SUGOI map going missing. Though, It doesn't fix that other glitch with one FOF (must be unrelated).
If you want to test these fixes out properly, make sure working in-level sectors, FOFs AND also polyobjects all still work fine, sloped or not.
See merge request !97
Fof slope crash fix
This fixes yet another software renderer crash, this time relating to sloped FOFs: sometimes the renderer thinks parts of FOFs where the top and bottom heights are the same height are actually the bottom going through the top (in other words a negative height). This causes problems when drawing normal walls around such FOFs since the game obviously doesn't expect negative heights anywhere along the FOF - before slopes, the game could just flip around the top and bottom heights automatically with no problems. This branch also should fix crashes for all genuine cases of negative FOF heights when slopes are involved, I suppose.
Hopefully this stops FuriousFox's SUGOI map crashing for the time being, all seemed fine when I tested it out myself.
See merge request !96
-warp checking for invalid map names
I've noticed a bunch of new people getting the "Cannot warp to map 0 (out of range)" error when testing their custom maps. On asking what map name they used, it was clear they didn't use a MAPxx name at all. Sadly it was not obvious to them that other kind of map names are not accepted by SRB2, so I thought it best we make that more clear in-game.
SRB2 now gives you the error "Cannot warp to map \[your input\] (invalid map name)" if you used -warp with a param that is neither a MAPxx name or a plain number.
See merge request !99
P_FindSpecialLineFromTag crash fix
This fixes the case where an in-level sector or FOF control sector with a tag of -1 or 65535 (seriously, who does that?) can possibly lead to a crash in this function when searching for heat linedef specials in 1st person. And also the same kind of crash any other sort of weird case where the tag number that function uses for searching is -1 or 65535, I suppose!
See merge request !98
Fix R_AddSingleSpriteDef's I_Error messages
Whoops, seems I forgot about this little branch. Basically this fixes how for a character's sprites, a full sprite lump name is displayed instead of just its sprite prefix in the "R_AddSingleSpriteDef: No patches found for [sprite prefix] frame [frame character]" message (unlike when it occurs for non-character sprites), resulting in something like "R_AddSingleSpriteDef: No patches found for PLAYC2C8 frame \^" which does NOT help custom character authors at all as it just confuses them instead. (for the record, the problem would actually with the ^ frame and not the ones displayed after "PLAY")
Oh, and the same problem is also fixed for this similar message: "R_AddSingleSpriteDef: Sprite [sprite prefix] frame [frame character] is missing rotations"
See merge request !95
for some apparent reason the compiler didn't like the while loop condition edit on its own (it complained about inline failures for P_MobjReadyToTrigger for some reason), so I had to add that extra bit above the while loop... and it was happy again, huh
If you want more specifics, sloped FOFs are to blame it turns out: sometimes the bottom of an FOF wall blocking a segment of an in-level wall column can be considered ABOVE the top part of the FOF there (yikes), and then the dc_y* values go offscreen, and then BOOM
Software crashes fix... fix
Fixes a typo introduced by merge request !75 that caused upper textures to set the wrong ceiling clipping value when not visible, allowing all sorts behind the walls to be visible. This is most noticable in GFZ2 when the inside of the tunnel section is visible
...probably a good idea to make sure this one doesn't introduce any MORE visual glitches by mistake (again, compare with 2.1.15 if possible)
See merge request !93
Fix for flats with transparent pixels on slopes
This fixes how R_DrawTiltedSplat_8 unintentionally allows the cyan pixels to NOT be considered "transparent" if after being remapped, depending on sector brightness and/or linedef type 606 colormaps, the result of remapping is not palette index 247 (the cyan we typically turn transparent). That is, the original colors from the source flat graphic are not checked, but instead the __result__ of coloring the flat under the respective colormap is checked for "transparent" pixels. This is only a problem for the tilted splat drawing function, not the regular one for non-sloped planes with cyan-pixel-using flats.
I found out about this bug from the issues Ritz was having with sloped 255-alpha translucent FOFs using transparent flats and his custom COLORMAP lump (and later when he applied a linedef type 606 colormap to the FOF) for his custom map. Thankfully he has some workarounds, but this should fix the code-side issues that caused his problems in the first place.
I also fixed stuff with another splat drawing function that's not currently used atm (maybe it will be in the future, if splats themselves are ever enabled again? *shrugs*).
See merge request !92
Skybox rendering offset fix for third person/alt view camera
Fixes the issue reported in this thread: https://mb.srb2.org/showthread.php?t=41729
I dunno if this will negatively affect any existing skyboxes in SRB2's own levels, that said. I tried out THZ2 and CEZ1 with this fix at least but I forgot to compare them with how they are in 2.1.15 so _*shrugs_*
See merge request !94
OS X Makefile build setup
This merge request:
* Cleans up the OS X bundle resource location code and fixes a SIGSEGV and memory leak
* Simplifies and fixes the OS X desktop alert code, closing more leaks
* Adds the MACOSX build flag to the Makefiles, to allow building a binary (but not Mac app yet) of SRB2.
This is intended to make it easier for developers to build on Mac OS X, without having to pull in all of XCode. You can keep using CMake if you prefer.
To test, use `make -C src MACOSX=1 NONX86=1 SDL=1 NOASM=1` for a release build.
Left to do:
* Add a content bundling script to be run after building, and a flag to trigger doing that.
`MACOSX_BUNDLE` maybe?
* Somehow get access to a Mac running PowerPC and figure out how to build a multi-platform binary.
* Add the proper magic to compile using gcc if requested. (Right now, compilation is done via LLVM/Clang)
See merge request !72
Gas jets, fan objects, springs and slopes
Whoop whoop whoop minor bugs that only get noticed due to weird experiments whoop whoop whoop
* For gas jets only: the object's standingslope is ALWAYS null. No drifting down the slope for you.
* For gas jets and fan objects: Now checks whether the player's top is below the bottom of the launcher, instead of its bottom. zdist calculation not affected, since it's signed and okay with being negative by about the height of the player.
* For all 3: the player's standingslope is NULL'd so the player isn't launched off at a wacky angle if they're standing on a slope then walk into the thing.
See merge request !91
Remove i_net.c
The code in i_net.c doesn't actually seem to be used in SRB2. I was able to compile a build without it, and hosting and joining netgames worked just fine (well, as fine as they can with the current state of the netcode...).
The vast majority of code in the file seems to be contained in HAVE_SDLNET ifdefs, and I'm pretty sure SRB2 has never used SDLNET in a public build. The only bit not contained in that block is I_InitNetwork(), which just prints an error and returns false.
Do we really need to keep it around? If not, I say get rid of it. It seems like useless clutter that is just going to confuse people who are trying to understand the source code.
See merge request !73
Re-factoring AA tree code from m_misc.c/m_misc.h into its own files
What the title says. The AA tree-related code now lives in the files m_aatree.c and m_aatree.h. Part of why I did this was to solve this m_misc.h/w_wad.h cyclic dependency problem (involving MAX_WADPATH and AA trees themselves) mentioned in the now-removed comments, another reason was ...only OpenGL uses AA trees at all, why include the relevent structs/functions/otherwise anywhere except where is necessary (which is very few files as it turns out)?
Otherwise, it just looked better on its own rather than mixed with all the other stuff already in the m_misc files. Not really important or anything affecting gameplay at all I guess.
See merge request !82
For GCC 6.1 builds
I do not know what I was doing:
NULL checks
building without BLUA support
functions that do not depend on outside vars should be tagged with "const", AKA, FUNCMATH
See merge request !89
- Now checks whether the player's top is below the bottom of the fan/gas jet, instead of its bottom. zdist calculation not affected.
- mo->standingslope is NULL'd so the player isn't launched off at a wacky angle. (I also did this for springs, since Prime mentioned it was a problem for them too.)
