For int, long, float and double. I've been meaning to add them for a
while, and they're part of the new Ruamoko instructions set (which is
progressing nicely).
The portal flow stack nodes contain a simd vector, which requires
16-byte alignment. However, on 32-bit Windows, malloc returns 8-byte
aligned memory, leading to eventual segfaults. Since pstack_t is 48
bytes on 32-bit systems, it fits nicely into a 64-byte aligned cache
line (or two on 64-bit systems due to being 80 bytes).
For most (if not all) maps. The heapsort is needed only if the clustered
leafs are not contiguous, but most bsp compilers output contiguous leaf
clusters, so is just a bit of protection. The difference isn't really
noticeable on a fast machine, but no point in doing more work than
necessary.
Now that only 3852 clusters need to be checked for each cluster, fat-pvs
construction for ad_tears completes in about 0.7s, most of which seems
to be loading, conversion, compression and writing. O(N^3) cuts both
ways (hurts like crazy when N increases, does wonders when N decreases,
especially by a factor of 25). And then throw in improved cache
performance...
I suspect having an off-line compiler is still useful, but even if
qfvis's implementation never actually gets used, if cluster
reconstruction is put in the engine, large maps will be feasible even
for quakeworld. Just the reduced memory requirements alone will be a
huge benefit (~3GB down to 1.8MB).
This is only the first half (vertical) in that the vis bits are still
for the leafs rather than the clusters, but ad_tears goes from 500s to
7s for calculating the fat pvs (3852 clusters).
While this doesn't give as much of a boost as does basic sphere culling
(since it's just culling sphere tests), it took ad_tears' base vis from
1000s to 720s on my machine.
This removes the last of the arbitrary limits from qfvis. The goal is
not so much supporting crazy maps, but more about better data usage
(cluster_t is now 24 (or 16) bytes instead of 1048 (or 528). And
passages isn't used (yet?)...
It turns out cmem is not so good for many large allocations (probably a
bug in handling the blocks), but was really meant for lots of little
churning allocations anyway. After an analysis of winding lifetimes, it
became clear that the hunk allocator would work very well. The base
windings are allocated from a global hunk (currently 1GB, plenty for
even ad_tears), and ephemeral windings are allocated from a per-thread
hunk of 1MB (seems to be way more than enough: gmsp3v2 uses a maximum of
only 56064 bytes, and ad_tears got through 30% before I gave up on it).
Any speed difference (for gmsp3v2) seems to be lost in the noise: still
completing in 38.4s on my machine.
The output fat-pvs data is the *difference* between the base pvs and fat
pvs. This currently makes for about 64kB savings for marcher.bsp, and
about 233MB savings for ad_tears.bsp (or about 50% (470.7MB->237.1MB)).
I expect using utf-8 encoding for the run lengths to make for even
bigger savings (the second output fat-pvs leaf of marcher.bsp is all 0s,
or 6 bytes in the file, which would reduce to 3 bytes using utf-8).
After seeing set_size and thinking it redundant (thought it returned the
capacity of the set until I checked), I realized set_count would be a
much better name (set_count (node->successors) in qfcc does make much
more sense).
Extremely large maps take a very long time to process their PVS sets for
PHS or shadows, so having an off-line compiler seems like a good idea.
The data isn't written out yet, and the fat pvs code may not be optimal
for cache access, but it gets through ad_tears in about 500s (12
threads, compared to 2100s single-threaded in the qw server).
This reduces the overhead needed to manage the memory blocks as the
blocks are guaranteed to be page-aligned. Also, the superblock is now
alllocated from within one of the memory blocks it manages. While this
does slightly reduce the available cachelines within the first block (by
one or two depending on 32 vs 64 bit pointers), it removes the need for
an extra memory allocation (probably via malloc) for the superblock.
GCC does a fairly nice job of producing code for vector types when the
hardware doesn't support SIMD, but it seems to break certain math
optimization rules due to excess precision (?). Still, it works well
enough for the core engine, but may not be well suited to the tools.
However, so far, only qfvis uses vector types (and it's not tested yet),
and tools should probably be used on suitable machines anyway (not
forces, of course).
This fixes the mightsee updates never occurring, but it doesn't make a
huge difference (though I suppose it might have back in the 90s, or with
a different map).
The stats were being updated before UpdateMightsee was getting called,
and it was incrementing the wrong value (so it would not have been
thread-safe).
While whether it's any faster is debatable (it's slightly slower, but
many more portals are being tested due to different rounding in the base
vis stage), it's certainly easier to read.
While the main bulk of the improvement (36s down from 42s for
gmsp3v2.bsp on my i7-6850K) comes from using a high-tide allocator for
the windings (which necessitated using a fixed size), it is ever so
slightly faster than using malloc as the back-end.
Double benefit, actually: faster when building a fat PVS (don't need to
copy as much) and can be used in multiple threads. Also, default visiblity
can be set, and the buffer size has its own macro.
There's still some cleanup to do, but everything seems to be working
nicely: `make -j` works, `make distcheck` passes. There is probably
plenty of bitrot in the package directories (RPM, debian), though.
The vc project files have been removed since those versions are way out
of date and quakeforge is pretty much dependent on gcc now anyway.
Most of the old Makefile.am files are now Makemodule.am. This should
allow for new Makefile.am files that allow local building (to be added
on an as-needed bases). The current remaining Makefile.am files are for
standalone sub-projects.a
The installable bins are currently built in the top-level build
directory. This may change if the clutter gets to be too much.
While this does make a noticeable difference in build times, the main
reason for the switch was to take care of the growing dependency issues:
now it's possible to build tools for code generation (eg, using qfcc and
ruamoko programs for code-gen).
It seems gcc doesn't care if the & is present when calculating field
offsets, but it not being there bothered me very much and might as well use
our "standard" macro anyway.
For the most part, it's just refactoring the code so the plane creation and
testing are in separate functions, but there is one important difference:
the plane test now checks only the two points on either side of the point
used to create the plane.
Because the portal winding is guaranteed to be convex and planar, if both
points are on the plane, all points are, and if neither point is behind the
plane, no points are.a
This shaved about 5 seconds off the level 4 run using 4 threads (~198s to
~193s) and about 12s from the single threaded run (~682s to ~670s (hmm,
gained some time in recent changes)).
