I updated sdl2-config.cmake in dhewm3-libs so building on Windows with
them works again, however that required also a little change in
dhewm3's CMakeLists.txt
I also still had some uncommited changes for that fullscreen workaround
that I'm committing now.
.. that doesn't switch the display resolution, but creates a borderless
fullscreen window at current desktop resolution.
SDL2-only (SDL_WINDOW_FULLSCREEN_DESKTOP).
Doing this with an additional CVar instead of r_fullscreen 2 or similar
has the advantage that it works properly with Alt-Enter
SDL has a bug (at least on Windows) where SDL_CreateWindow() with
SDL_WINDOW_FULLSCREEN doesn't use the configured resolution (if it's
higher than the current desktop resolution).
Try to work around that - based on Yamagi Quake II code.
Also, if GLimp_Init() fails, the "safe mode" fallback is now in
windowed mode instead of fullscreen mode.
The code used #ifdef __ppc__, probably a leftover from old Mac support,
which apparently doesn't work on all PPC systems (maybe not 64bit PPC).
Now using the LittleFloat() function instead which exists for
exactly this purpose and already handles endianess properly.
If a "class" (object) in a Script has multiple member function
prototypes, and one function implementation later calls another before
that is implemented, there was an assertion when the script was parsed
(at map start), because the size of function arguments at the call-site
didn't match what the function expected - because the function hadn't
calculated that size yet, that only happened once its own
implementation was parsed.
Now it's calculated (and stored) when the prototype/declaration is
parsed to prevent this issue, which seems to be kinda common with Mods,
esp. Script-only mods, as the release game DLLs had Assertions disabled.
It corrupted the stack when called with buffers allocated on the stack
and numSamples that are not a multiple of four, apparently, by writing
4 floats too many, at least in the 22KHz Stereo case..
This caused the crash described in
https://github.com/dhewm/dhewm3/issues/303#issuecomment-678809662
Now it just uses the generic C code, like all platforms besides MSVC/x86
already do.
Apparently VS2019 (or its integrated CMake?) interpreted
add_definitions(/MP) as "also pass it to rc.exe" which didn't like it..
no idea why this worked before, but now it seems to work everywhere.
fix#304
Also set VS_STARTUP_PROJECT so when launching the debugger in VS it doesn't
try to launch ALL_BUILD (...) but dhewm3.
idSessionLocal::SaveGame() uses saveName for both the description in
savegames/bla.txt and the filename itself ("bla" in this case), which
is a "scrubbed" version of that string ("file extension" removed,
problematic chars replaced with '_').
In case of Autosaves, MoveToNewMap() passes a translated name of the
map as saveName, which makes sense for the description, but not so much
for the filename.
In Spanish the Alpha Labs names are like "LAB. ALFA 1", "LAB. ALFA 2" ..
and everything after "LAB" is cut off as a file extension - so every
autosave of an Alpha Labs part overwrites the last one, as they all get
the same name...
The solution is to pass an additional (optional) argument saveFileName
to idSessionLocal::SaveGame(), and for autosaves pass the mapname
(which is the filename without .map; yes, it might contain slashes,
but the scrubber will turn them into _) instead of the translated name
as saveFileName.
If you save, you get a message like "Game Saved..." which goes away
after a few seconds. This happens at the very end of idPlayer::Save():
if ( hud ) {
hud->SetStateString( "message", /* .. left out .. */ );
hud->HandleNamedEvent( "Message" );
}
And handled in hud.gui, "onNamedEvent Message { ..."
However, if you save again before it's gone, it'll be shown after
loading the savegame and not go away until you save again..
This works around that issue by setting an empty message after loading
a savegame.
The underlying problem (which is not fixed!) seems to be that the
transition GUI command (that's executed when hud.gui handles the
"Message" event that's used to show this message) is probably not
properly saved/restored so fading out the message isn't continued
after loading.
idStr::StripFileExtension() (and SetFileExtension() which uses it) and
others didn't work correctly if there was a dot in a directory name,
because they just searched from last to first char for '.', so if the
current filename didn't have an extension to cut off, they'd just cut off
at any other '.' they found.
So D:\dev\doom3.data\base\maps\bla could turn into D:\dev\doom3
(or, for SetFileExtension(), D:\dev\doom3.map)
While at it, I made most of the idStr code that explicitly checked for '\\'
and '/' (and maybe ':' for AROS) use a little "bool isDirSeparator(int c)"
function so we don't have the #ifdefs for different platforms all over
the place.
the game was frozen (the main menu and console worked though) when
switching from the Radiant to the engine (with F2 or that button).
Turned out common->ActivateTool( false ) must be called if the game window
has forcus, so idSessionLocal::Frame() doesn't return early (and thus not
run the game code).
Furthermore, there was no sound when switching from Radiant to the game,
because the SoundWorld was set to sth editor-specific. Fixed that as well.
I worked around the issue for the particle editor, but now it turned out
it can also somehow happen when switching from the Radiant to the Engine
(with F2), so I implemented the "proper" fix of restoring
glConfig.vidWidth/Height, that are overwritten in
RenderSystemLocal::BeginFrame(), in RenderSystemLocal::EndFrame().
That could happen if the searchpath was "" (like the default value of
fs_cdpath ...).
I don't think it could do any damage, but it's confusing (if "developer"
CVar is enabled) and pointless.
It caused lots of "Non-portable: path contains uppercase characters: .."
Warnings, which now also become more readable by adding a newline.
If REPRODUCIBLE_BUILD is enabled in CMake, the code will not use
__DATE__ or __TIME__ macros, but instead hardcoded values.
Wherever __DATE__ or __TIME__ were previously used, we now use
ID__DATE__ and ID__TIME__, which are either set to hardcoded values or
to __DATE__ and __TIME__ in neo/framework/Licensee.h.
For some reason sounds were only updated/started about every 100ms,
which could lead to delays of up to around 100ms after a sound gets
started (with idSoundEmitterLocal::StartSound()) until OpenAL is finally
told to play the sound.
Also, the actual delay drifted over time between 1ms and 100ms, as the
sound ticks weren't a fixed multiple of the (16ms) gameticks - and the
sound updates didn't even happen at the regular 92-94ms intervals they
should because they run in the async thread which only updates every
16ms...
Because of this, the machine gun and other rapid firing weapons sounded
like they shot in bursts or left out shots occasionally, even though
they don't.
Anyway, now sound is updated every 16ms in the async thread so delays
are <= 16ms and hopefully less noticeable.
You can still get the old behavior with com_asyncSound 2 if you want.
OpenAL devices can disconnect, and with some luck they're back after
a few seconds. This especially seems to happen with Intels Windows GPU
driver and display-audio when switching the resolution or enabling
fullscreen, see #209
Now a disconnect is detected and we try to reset the device for 20
seconds, hoping it comes back. This needs at least openal-soft 1.17.0
to build and 1.20.0 or newer to actually work.
Also added missing stub functions in openal_stub.cpp (used by dedicated
server so it doesn't have to link libopenal)
idSoundSystemLocal::Init() didn't consider the case that opening the
default device (alcOpenDevice(NULL)) could fail, but this can happen if no
audio devices exist (or all are disabled or they're sleeping bluetooth
headphones or whatever).
Starting a map failed then with
ERROR: idSoundCache: error generating OpenAL hardware buffer
Now this and "s_noSound 1" are handled the same and one can play.
If the main sound in a shader was a .wav
(soundShader->entries[0]->hardwareBuffer == true), only that sound was
played (and looped with AL_LOOPING), even if a leadin was configured.
If the main sound was an .ogg it worked.
Not it should always work.
On Windows, ID_INLINE does __forceinline, which is bad if the function
calls alloca() and is called in a loop..
So use just __inline there so the compiler can choose not to inline
(if called in a loop).
This didn't cause actual stack overflows as far as I know, but it could
(and MSVC warns about it).
turns out tri->numIndexes can be quite big so _alloca16() would be
called with >1MB - and the Win32 stack only is 1MB, so that overflows.
As a workaround, use Mem_Alloc16() if we need >600KB
was reported in #265
The Doom3: Lost Mission (aka D3LE) mod uses string table entry keys that
don't follow the proper Doom3 scheme of "#str_01234", but look like
"#str_adil_exis_pda_01_audio_info" - the "hash" algorithm of idLangDict,
which basically just converts the number after "#str_" into an int,
probably doesn't work very well with this and there was an assertion
to prevent this..
However, it seems to work well enough, so now I only print one warning
for the first "invalid" key and otherwise accept those keys.
The stringtable (strings/*.lang) also has font-related entries
(like "#font" "Chainlink_Semi-Bold") that triggered another assertion,
now everything that starts with "#font" is silently skipped.
can be enabled/disabled with the r_useStencilOpSeparate for comparisons
(like Z-Fail, this doesn't really seem to make a difference on my main
machine, neither on my RPi4)
Partly based on Pat Raynor's Code:
2933cb5545/neo/renderer/draw_stencilshadow.cpp
the tables contain character constants like ('รค') that are supposed to
be interpreted as ISO8859-1 or WINDOWS-1252 or sth, but that doesn't
seem to work with MinGW (anymore) - seems like it assumes UTF-8 by
default, and for some reason -finput-charset=ISO8859-1 doesn't help
either, it complains about multichar character constants then..
Anyway, now the table entries are represented as the corresponding
integer constants which seems to work as intended.
Fixes#238
