Also add some recent keywords to the list in con_lang.lua which I had
forgotten all along.
git-svn-id: https://svn.eduke32.com/eduke32@3845 1a8010ca-5511-0410-912e-c29ae57300e0
Also, make sector[].*stat a bitint type.
Now, a piece of code could look like this:
local sec = sector[i]
local ceil = sec.ceiling
ceil.statx:flip(sector.STAT.SMOOSH)
git-svn-id: https://svn.eduke32.com/eduke32@3844 1a8010ca-5511-0410-912e-c29ae57300e0
The previous behavior was to translate them as global gamevars, since LunaCON
currently has no support for multiplayer. However, then some errors would be
missed where such gamevars are accessed in no-player context
(e.g. EVENT_ENTERLEVEL).
On by default, disabled with -fno-playervar.
git-svn-id: https://svn.eduke32.com/eduke32@3842 1a8010ca-5511-0410-912e-c29ae57300e0
G_PrintGameText(), minitext_(), G_DrawTXDigiNumZ(), and menutext_() now wrap G_ScreenText().
G_GameTextLen() now wraps G_ScreenTextSize().
G_DrawDigiNum_() now wraps G_DrawTXDigiNumZ().
git-svn-id: https://svn.eduke32.com/eduke32@3836 1a8010ca-5511-0410-912e-c29ae57300e0
Hard replacement reassigns the tile flags, while soft replacement bitwise
ORs them, as in CON (since some flags might already have been set using
commands like spritenoshade).
git-svn-id: https://svn.eduke32.com/eduke32@3829 1a8010ca-5511-0410-912e-c29ae57300e0
The latter checked with #defined HAVE_GTK2, which is probably not correct
for every platform.
In builds without a startup window, the periods get mingled with stdout
output otherwise.
git-svn-id: https://svn.eduke32.com/eduke32@3827 1a8010ca-5511-0410-912e-c29ae57300e0
Also, allow (implicit) actor index -1 to 'sound' like in C-CON and fix
MULTIMODE gamevar definition (was 0, not 1).
git-svn-id: https://svn.eduke32.com/eduke32@3826 1a8010ca-5511-0410-912e-c29ae57300e0
In 3D mode, Alt+F now only attempts to set the first wall of the aimed at
wall, not collecting upper/lower neighbors. For this, press Shift+Alt+F.
In 2D mode, they are always collected.
git-svn-id: https://svn.eduke32.com/eduke32@3825 1a8010ca-5511-0410-912e-c29ae57300e0
Analogously for the negation; remove a couple of redundant decls of "qsetmode".
git-svn-id: https://svn.eduke32.com/eduke32@3823 1a8010ca-5511-0410-912e-c29ae57300e0
Because one may obviously use gettspr/settspr in states called from that
event.
git-svn-id: https://svn.eduke32.com/eduke32@3820 1a8010ca-5511-0410-912e-c29ae57300e0
The 'x' is for "extended", since its last arg is a switch of whether to disable
sliding. Use that from gameexec.c.
git-svn-id: https://svn.eduke32.com/eduke32@3811 1a8010ca-5511-0410-912e-c29ae57300e0
For pre-1.3 CONs, determining the older script version with gamestartup and/or
definelevelname is not implemented.
git-svn-id: https://svn.eduke32.com/eduke32@3806 1a8010ca-5511-0410-912e-c29ae57300e0
NOTE: I'm committing this from my git clone again. If this works OK,
everything is in good order again. If not, I hope that I won't damage
the SVN repo. *Runs away...*
git-svn-id: https://svn.eduke32.com/eduke32@3798 1a8010ca-5511-0410-912e-c29ae57300e0
What is missing is saving and restoring per-player and per-actor gamevars.
Also add a test CON mutator 'mapstate.con'.
git-svn-id: https://svn.eduke32.com/eduke32@3794 1a8010ca-5511-0410-912e-c29ae57300e0
Instead, MapInfo[ud.volume_number*MAXLEVELS+ud.level_number] is accessed
inside these functions.
git-svn-id: https://svn.eduke32.com/eduke32@3792 1a8010ca-5511-0410-912e-c29ae57300e0
Also, prettify G_FreeMapState(), remove some duplicate function decls and
resurrect 'savestate' and 'restorestate' OSD commands for the debug build.
git-svn-id: https://svn.eduke32.com/eduke32@3791 1a8010ca-5511-0410-912e-c29ae57300e0
There's no option letter for loading them, and the extension is checked
case sensitively. Lua modules are loaded after CON translated to Lua.
Also remove -testlua option.
git-svn-id: https://svn.eduke32.com/eduke32@3788 1a8010ca-5511-0410-912e-c29ae57300e0
Also, update test_tileoffsets.map with a new 'dimension': cstat 128
(sprite centering). It has an issue in Polymer marked with a silver D.
git-svn-id: https://svn.eduke32.com/eduke32@3777 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes the case marked with the silver letter C in test_tileoffsets.map.
The orientation of the sprites is correct (matches classic) as far as I can
see, there are now only problems with translation.
git-svn-id: https://svn.eduke32.com/eduke32@3776 1a8010ca-5511-0410-912e-c29ae57300e0
Also, add some defines for sprite cstats to build.h (SPR_*) and use them.
git-svn-id: https://svn.eduke32.com/eduke32@3775 1a8010ca-5511-0410-912e-c29ae57300e0
It has all combinations of {STEAM,CEILINGSTEAM} x combinations(flipping)
x combinations(alignment). Three silver letters are placed near cases that
currently draw not like classic in Polymost or Polymer.
git-svn-id: https://svn.eduke32.com/eduke32@3774 1a8010ca-5511-0410-912e-c29ae57300e0
Among other things, rotatesprite doesn't cope well with large zoom values.
Two assertions are added that guard qinterpolatedown16short() calls: in
the failing case, they would write outside the destination arrays.
Another (existing) assertion is commented a little and like for the first,
instructions are given how to reproduce its failure.
git-svn-id: https://svn.eduke32.com/eduke32@3754 1a8010ca-5511-0410-912e-c29ae57300e0
Variables dt_* are defined. If dt_t (tile number) is >=0 that tile is drawn
using 'rotatespritea'.
git-svn-id: https://svn.eduke32.com/eduke32@3752 1a8010ca-5511-0410-912e-c29ae57300e0
- factored out: tweak_sboardfilename(), menuselect_try_findlast()
- quickloading a map now doesn't require loading one first
- the usual
git-svn-id: https://svn.eduke32.com/eduke32@3749 1a8010ca-5511-0410-912e-c29ae57300e0
Selected by writing e.g. 'corruptcheck tryfix 1-14 ??' in the console.
Like with the first alternative, the corruption numbers / range (here, 1-14)
must be given.
git-svn-id: https://svn.eduke32.com/eduke32@3746 1a8010ca-5511-0410-912e-c29ae57300e0
... in the auto-correction. Also,
- make two similar corruptions level 5 (wallptr oob, wallptr+wallnum oob).
- in drawscreen_drawwall(), do a more strict bound check, not only >=0.
git-svn-id: https://svn.eduke32.com/eduke32@3745 1a8010ca-5511-0410-912e-c29ae57300e0
That is, assume that switch(DYNAMICTILEMAP(-1)) (which is an oob access and thus
undefined behavior) gets us to the 'default:' label.
git-svn-id: https://svn.eduke32.com/eduke32@3743 1a8010ca-5511-0410-912e-c29ae57300e0
The visibility calculation relies on the distance, which might not be entirely
accurate in rotatesprite, so maybe it'll be too dark in some cases.
git-svn-id: https://svn.eduke32.com/eduke32@3741 1a8010ca-5511-0410-912e-c29ae57300e0
TODO: figure out wtf is wrong with rotatesprite, linear filtering.
git-svn-id: https://svn.eduke32.com/eduke32@3737 1a8010ca-5511-0410-912e-c29ae57300e0
In the mirror reversing code, get rid of the padding. This may produce
seams, but they appear to be extremely transient and shouldn't be
noticeable.
In game.c, add a debugging compilation switch DEBUG_MIRRORS_ONLY.
git-svn-id: https://svn.eduke32.com/eduke32@3726 1a8010ca-5511-0410-912e-c29ae57300e0
No functional changes, but a (commented out) debug line for an oob read of the
frame buffer when the mirror covers the whole screen is inserted.
git-svn-id: https://svn.eduke32.com/eduke32@3719 1a8010ca-5511-0410-912e-c29ae57300e0
- Return early from drawsprite_classic() if tspr->owner if oob.
Commonize that check between renderers into bad_tspr().
- Make the BIT() macro a left-shift of the *unsigned* number 1,
preventing expansion to (1<<31).
git-svn-id: https://svn.eduke32.com/eduke32@3717 1a8010ca-5511-0410-912e-c29ae57300e0
In those Clang versions, -fcatch-undefined-behavior was replaced by
-fsanitize=<what>. For Clang 3.2, we enable the address sanitizer
and for 3.3 also the miscellaneous undefined behavior one.
Currently, there's no version auto-detection from the Makefiles, it's
set to 3.3 and the others are commented out.
git-svn-id: https://svn.eduke32.com/eduke32@3716 1a8010ca-5511-0410-912e-c29ae57300e0
Numbers 0 and 1 mean 'no spread', but the latter does one krand() call.
Negative numbers are reserved for potential future use.
git-svn-id: https://svn.eduke32.com/eduke32@3715 1a8010ca-5511-0410-912e-c29ae57300e0
... four lines later.
I don't know if that is the intended semantics for this function, but
nasal demons is clearly not what we want. Please review!
git-svn-id: https://svn.eduke32.com/eduke32@3712 1a8010ca-5511-0410-912e-c29ae57300e0
LameDuke's shade table has 32 gradients of shade, like Duke3D.
For the translucency table though, only the diagonal + one half is stored
because it's symmetric (50/50 translucency).
git-svn-id: https://svn.eduke32.com/eduke32@3709 1a8010ca-5511-0410-912e-c29ae57300e0
grpinfo
{
name "YourGameName"
scriptname "yourgame.con"
defname "yourgame.def"
size yourgrpsize
dependency DUKE15_CRC
flags GAMEFLAG_ADDON
crc yourgrpcrc
}
The "flags" field can also take the value "GAMEFLAG_DUKE" to define a new base game. Since this is the first commit of a new feature, certain semantics of the implementation and syntax are liable to change as necessary.
git-svn-id: https://svn.eduke32.com/eduke32@3708 1a8010ca-5511-0410-912e-c29ae57300e0
Set it to >=0 to override the base palette (water, slime, ...) in 3D mode.
This can be useful to navigate Lameduke's underwater sections, since its
LOOKUP.DAT only contains 8 lookup tables, but no other *base* palettes.
Consequently, base palettes >=1 will make the whole screen black when
Lameduke's LOOKUP.DAT is loaded into EDuke32 or Mapster32.
git-svn-id: https://svn.eduke32.com/eduke32@3704 1a8010ca-5511-0410-912e-c29ae57300e0
Also remove the two instances of commented out code, but not the respective
CON structure access code.
git-svn-id: https://svn.eduke32.com/eduke32@3702 1a8010ca-5511-0410-912e-c29ae57300e0
This fixes RESPAWN preview wrongly clamping the previewed tsprite z coords to
[-524288 .. 524288] (x/y limits).
Also, make the previewed tsprites be 33% translucent with the option of 66%
translucency by setting 'showrespawn_fulltrans' to 1 in a.m32.
git-svn-id: https://svn.eduke32.com/eduke32@3699 1a8010ca-5511-0410-912e-c29ae57300e0
